Open Source Ecology - User contributions [en]

User talk:Johnblakley

2023-01-13T10:41:59Z

Calligarov: FreeCAD teaching @ high school

Hi John! I saw on your log that you started teaching FreeCAD to (128!!!) high school students. Very nice, congratulations!

Is this a STEAM Camp or is it a full High School course? What are you going to teach about FreeCAD?

[[User:Calligarov|Calligarov]] ([[User talk:Calligarov|talk]]) 10:41, 13 January 2023 (UTC)

----

'''Welcome to ''Open Source Ecology''!'''

Thank you for registering on the Open Source Ecology wiki. Please see my '''[[Global Village Construction Set TED Talk]]''' for a 4 minute introduction to the project.

'''Please see all the ways for getting involved at the [[Getting Involved]] wiki page.'''

Do you see any other ways that you would like to get involved? You can email me at marcin at opensourceecology dot org.

Thanks,

Marcin Jakubowski

OSE Founder [[User:Marcin|Marcin]] ([[User talk:Marcin|talk]]) 19:40, 29 December 2020 (UTC)

Replication

2022-09-09T10:32:23Z

Calligarov: /* 2022 */

{{OrigLang}}
{{Tip|Replication Discussions|
Feel free to discuss your ideas and experiences regarding replication on the [http://forum.opensourceecology.org/categories/gvcs-replication GVCS Replication category] of our forum.
}}
{{TOC left}}
= Overview =
<p style="text-align:justify;">Using the [[Civilization_Starter_Kit_DVD_v0.01|Civilization Starter Kit]], people are beginning to independently build their own [[Global_Village_Construction_Set|Global Village Construction Set]] machinery throughout the world. Many of them have come to [[Factor_e_Farm|Factor e Farm]] for [[Dedicated_Project_Visits|Dedicated Project Visits]], and others have taught themselves based on our training materials. We conduct [[Evaluations|program evaluations]].

=Replicator's Survey=

If you have built any of the GVCS machines, we'd like to hear about your experience for learning purposes. Please email us at info at opensourceecology to share your experience, or add your build to this page.

== Daniel & Hayden: Pasadena, California, USA ==

[[Image:DH_Tractors_-_02.jpg|left|400px]]
<h3>'''[http://dandhtractors.org/ D&H Tractors]'''</h3>
<p style="text-align:justify;">'''We are D & H, Daniel and Hayden, 12th grade students at the Polytechnic School in Pasadena, CA.'''</p>
<p style="text-align:justify;">We, along with our engineering class and several students from nearby Blair High School, intend to build a Lifetrac from the plans of Open Source Ecology. We will donate the tractor to [http://www.southcentralfarmers.com/ The South Central Farmers Cooperative], for use on their 120 acre farm in Shafter, CA.</p>

<p style="text-align:justify;">Our rationale for taking on this project is three pronged. By being among the first- and the first high school aged students- to replicate the Lifetrac, we are doing a service to the Open Ecology Project, and, consequently, may be helping change the future of agriculture everywhere. Our project will, likewise, benefit the South Central Farmers, who are eager to experiment with open source agricultural technology. Finally, bringing a project like this to the Polytechnic School (and, in a smaller degree to Blair High School) will provide aspiring engineers with a chance to use their skills in the field before leaving for college.</p>
* Slides: http://imgur.com/a/eZq7t/embed
* High School Presentation: http://vimeo.com/36147461
{{Clear}}

== Manuel Aguilar: Guatemala ==

[[Image:Manuel Aguilar - 02.jpg|left|400px]]

<h3>'''[http://quetsol.com/ Quetsol]'''</h3>

<p style="text-align:justify;">'''Manuel was co-founder of Quetsol. Quetsol offers appropriate technology solutions that sustainably provide for the energy demands of a wide variety of users at a lower social and economic cost.'''</p>

<p style="text-align:justify;">Our project, currently in late planning stages, is building a sustainable village for about 30 families recently displaced by extreme weather in Guatemala. The village model will approach sustainability in an integral way, from housing design and construction to agriculture and resource management. Residences, for example, will incorporate appropriate materials (CEB mostly), passive solar design, and come standard with rain-catchment systems with prefiltration, mini greenhouses, efficient wood/methane stoves, water filtration, PV for light/comm, compost toilets, water recycling. Agri and aquaculture will be efficiently designed as well as per local conditions (location TBD soon). The aim will be to demonstrate a working prototype of a self-sustainable community built for the BOP, which can, when designed and built appropriately, economically replace the current minimum denominator settlements which cause so much human and environmental hazard. Ultimately we intend to build something replicable and scalable, which is where OSE comes in.</p>

<p style="text-align:justify;">OSE will integrate into our work in a variety of ways. Initially, we aim to train a skilled replicator so that some of the first GVCS machines can be built on site and facilitate village construction and development. We also plan to build and equip a workshop in which to build the initial machines and which will also eventually serve as a high-value business opportunity to some trained villager entrepreneurs. Beyond the machines built for village use, which will generate value at reduced cost - income will be generated initially from fabricating machines for local distribution. Eventually, they workshop will also expand to include training of locals, so that other such businesses may sprout in other communities. This is in keeping with the OSE ethos, and at the core of many of our intentions with our project. The village aims to demonstrate that post-scarcity abundance can be achieved, even with the lowest means found amongst the BoP, with appropriate use of technology. OSE provides a fantastic set of tools and methodologies that potentiate development precisely through intelligent open-source design and tech.</p>

<p style="text-align:justify;">In terms of time frame, in the next month, we will have purchased land, identified a replicator, finished first project proposal and begin land work. April I will be travelling abroad for 3 weeks, so construction of the first living Unit will take place mid-May. During summer, June-Aug, we will build the workshop and at some point fabricate the CEB press after having the replicator receive proper training. After this is accomplised, we will build the residential units and have the families begin to move in, as they will also be helping build their own houses.</p>
<br style="clear: both" />

See [[Guatemala Log]] for more details.

== Andrew Spina: Baltimore, Maryland, USA ==
[[Image:Andrew-Spina---02.jpg|left|400px]]
<h3>'''[http://aispina.blogspot.com/ Machining Independence]'''</h3>
<p style="text-align:justify;">'''I'm building my own tractor''' because I want to understand it and be able to maintain it. It's also a project that will teach me many valuable skills. I've already learned a ton about machining and CAD.</p>

<p style="text-align:justify;">Finally, I'm interested in joining the material economy at some time in my life. So far I've earned my living by working in the knowledge economy. I think really hard and get paid to do it. I'm employed as a programmer. It's a job I love, but constrains my life quite a lot-- I work 40hr a week and have to commute to my place of work. One day, I'd like to have a bit more control-- perhaps program as a hobby.</p>

<p style="text-align:justify;">What do I mean by 'material economy' ([http://www.newgreeneconomy.com/sustainable-living/item/12-transforming-the-materials-economy a green wing article])? I mean that I take ingredients and make a product. The product is a tangible thing that solves a tangible problem like hunger, need for shelter, etc. This is important because the tangible problems are the ones that force the average person to take a 9 to 5. If I can provide fixes for these root human needs, I'll have high security (someone somewhere is hungry) and be encouraging smaller scale self sufficiency. The OSE folk argue (see Village Scale [http://opensourceecology.org/wiki/OSE_Spec here]) that a material economy of about 200 people is enough for comfortable modern living locally. That sounds like somewhere I'd want to live.</p>

<p style="text-align:justify;">So what will I produce in the material economy? I mean really, what will my tractor produce? I don't have a firm plan, but my current thoughts are to produce pelletized biomass. With a few tools (Tractor, Hay Cutter, Hammer Mill, Pelletizer) and some land, I may be able to produce a renewable, carbon neutral (or even negative!) local fuel. I'm not yet clear on the economics-- how much land make how many pellets? How much labor for each acre of land? How much do pellets cost? Where would I sell them? But, I'm going to have a tractor regardless so if the economics don't work, I'll find a different plan.</p>
<br style="clear: both" />
== James Slade: Austin, Texas, USA ==

[[Image:James_Slade_-_02.jpg|left|400px]]
<h3>'''[[Replication-CreationFlame|Creation Flame]]'''</h3>
<p style="text-align:justify;">"'''October, 2011 marks the first ever replication of a complete [[GVCS]] machine by an independent third party. This is a day of historical significance for the Global Village Construction Set. Congratulations to James Slade of Texas.'''"</p>
''- Marcin Jakubowski, Nov. 14, 2011''

<p style="text-align:justify;">James Slade is one of the co-founder's of [http://www.CreationFlame.org Creation Flame] in Cedar Creek, Texas. In partnership with Jason Smith, Creation Flame is the first to successfully replicate a CEB press and is now getting into the business of using and selling CEB blocks. In unison with Thad from Broken Sidewalk Farm, they are starting production of a LifeTrac, self replicating CNC Plasma table, and another Powercube. Also starting to build a few [[roller table|Roller Tables]] to help with the CEB's and steel work.</p>
<br>

See corresponding [http://blog.opensourceecology.org/2011/11/historic-moment/ Blog Post]. See [[Patrick Gibbs Interview of James Slade]] regarding this replication.

<br />
CEB brick pressing results from Creation Flame: [[CEB_Blocks|CEB Blocks]]
<br style="clear: both" />
<br style="clear: both" />

== Tom Griffing: Dallas, Texas, USA ==

[[Image:Tom_Griffing_-_02.jpg|left|400px]]
'''<h3>[[Replication/PondusLLC|Pondus, LLC]]</h3>'''
<p style="text-align:justify;">'''Tom Griffing operates Pondus LLC in Dallas, Texas.'''</p>

<p style="text-align:justify;">After spending nearly a month in Missouri in August, Tom has continued his efforts in documentation, design enhancements and in replicating his first Power Cube. He is now targeting a LifeTrac after making improvements on our Power Cube Prototype 4 design.</p>

'''Video:''' [http://www.youtube.com/watch?v=HhOphEJiCVk&feature=plcp&context=C359e526UDOEgsToPDskLmdLjD8raeWHMmtqV-8xWe Power Cube Prototype 5] - Tom's updated design of the Power Cube.

'''Photo:''' [[First_Power_Cube_Sold_by_Tom_Griffing|Enhanced Power Cube]] - the first Power Cube sold by Tom.
<br />

<br />

<br style="clear: both" />

== Luke Iseman: Austin, Texas, USA ==

[[Image:Luke-Iseman---02.jpg|left|400px]]
'''<h3>[http://www.re-char.com re:char]</h3>'''
'''<p style="text-align:justify;">Luke worked on [[CNC_Torch_Table#Suggested_steps_from_Luke_Iseman|making improvements]] to the CNC Torch Table and made a [[Luke_Iseman_Dedicated_Project_Visit_Application|dedicated project visit]] to Factor e Farm in December, 2011.</p>'''
<p style="text-align:justify;">Luke is chief technology officer for [http://www.re-char.com re:char]. He graduated, cum laude, from [http://www.wharton.upenn.edu/ The Wharton School] at the University of Pennsylvania, concentrating in Entrepreneurship and Operations. Luke is passionate about open source hardware, and his projects have been covered by [http://makezine.com/ Make Magazine], [http://www.re-char.com/who-we-are/rechar-team/boingboing.net/ Boingboing], [http://www.re-char.com/who-we-are/rechar-team/www.wired.com/ Wired], and [http://www.re-char.com/who-we-are/rechar-team/www.austinchronicle.com The Austin Chronicle]. Before joining the re:char team, Luke worked at a variety of software technology companies, built and managed a fleet of 25 pedicabs, invented an automated gardening computer, and wrote a book about traveling around the world. Luke is excited about using the power of the physical computing revolution to build a more sustainable world.</p>

<br style="clear: both" />

== Dorkmo: Tulsa, Oklahoma, USA ==

[[Image:Dorkmo---02.jpg|left|400px]]
'''<h3>[[User:Dorkmo|Dorkmo]]</h3>'''
'''<p style="text-align:justify;">Dorkmo is a user from Oklahoma with a background in tinkering, and he enjoys spreadsheets.</p>'''

<p style="text-align:justify;">He has independently replicated the [[CEB_Press/Manufacturing_Instructions/Detroit_Fab_Lab_Solenoid_Driver_v2|Detroit Board]] and the [[CEB_Press/Manufacturing_Instructions/Controller_Box|CEB Controller Box]].
<br />
<br />
<br />
<br />
<br />
<br />

<br style="clear: both;" />

== Dandelion Village: Bloomington, Indiana, USA ==

Zach Dwiel is a member of [http://dandelionvillage.org/ Dandelion Village], an ecovillage in the city limits of Bloomington, Indiana. They are in the process of building their first home using a CEB Press and Power Cube. Tom built our Power Cube. For the CEB Press, James Slade fabricated the steel parts, Zach designed and built the controller board and electronics, purchased the hydraulics and Dandelion Village assembled the machine.

Zach plans to build a two story house this year (2012) with the bricks from the CEB Press. More buildings are planned for next year, some of which may include bricks from the CEB Press, depending on how production goes on the first home. You can find updates on my blog: [http://dwiel.net/blog/category/house/ blog] and my house design here on this wiki: [[Dwiel House]]

== Tony Mensah, Mark Amo-Boateng, William Neal: Nanjing, China ==
[[Image:Mark_MetricCEB.jpg|left|400px]]
<h3>'''[[China Replication]]'''</h3>

In May, 2012, this group, originally from Ghana and Canada, set out in Nanjing to redesign the CEB press to metric specifications and build it with the help of some engineers at a factory in Ma'anshan, Anhui, China.

According to a report received on September 27th, there were some technical issues surrounding the later stages of assembly of the CEB press, particularly centred around the secondary cylinder and the soil shaker.

'''In June, 2013, the group was finally able to test the brick press - successfully [https://www.youtube.com/watch?v=QNWvE1HluZ8 (youtube link)]'''.


{{Clear}}

=Charles Liptaak=
<div class="toccolours mw-collapsible mw-collapsed" style="width:800px;">
<big>'''Charles Liptaak's Replication'''</big>
<div class="mw-collapsible-content">{{:Charles Liptaak Replication}}</div>
</div>

=Italy=
*CEB 1 - [http://www.facebook.com/media/set/?set=a.407927422606836.96582.260586650674248&type=1]
*CEB 2 - [https://www.facebook.com/OpenSourceEcologyItalia/photos/a.360056254060620.83900.260586650674248/367184470014465/?type=3&theater]

=Up to 2012=
Here is a clickable document (click edit below the drawing to access links) - all machines built up to 2012:

<html><img src="https://docs.google.com/drawings/d/13KT0VcHtk93h_yF_y6SdvTQgkN8_FOaaDmBhyDGUfhs/pub?w=960&h=720"></html>

[https://docs.google.com/drawings/d/13KT0VcHtk93h_yF_y6SdvTQgkN8_FOaaDmBhyDGUfhs/edit edit]

==Itemized==
*[[Texas_CEB_Work]]

=2022=
[[D3D Universal v21.06]] replica in Cadore, Italy - up and running

[[File:D3DUniversalv21.06Cadore.png|250px]]

=2019=
{{Hint|Note: starting newest at the top beginning in 2019}}
*[[D3D @ Fontys Sittard]]
*Ciruit plotter by [[Ferdi Log]] - see https://feadi.github.io/OSE/
*[[Universal Axis]] 3D printer - 3 in China, Canada, and Guyana by [[William Neal]]

=2018=
*[[Universal Axis]] 3D printer - [[SZOIL]] in Shenzhen, China.
*[[CEB Replication in France]]
*CEB Press in South Africa - Tsolo Moahloli <tsolo@bothopele.com>
[[File:Tsolo1.jpg|200px]][[File:Tsolo2.jpg|200px]]

=2017=
*See [[D3D Genealogy]] - there is a number of 3D printer replications in different countries.

=2016=
*Brick press in france-

<html><iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155545228151562&width=500" width="500" height="657" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe></html>

=2015=
*[[Tractor Replication in Peru]]
*[[Tractor Replication in Canada]]
[[File:bamfordtractor.jpg|500px]]
*[[Rob Beddingfield CEB Press]]

=2014=
*CEB Press - for Scott Mader
*CEB Press - for Midwest Renewable Energy Fair
*CEB Press - for Factor e Farm
*PowerCube - Structural 1&2
*MicroPowerCube 2&3
*Lulzbot TAZ- 12 3D printers built in a workshop
*MicroCar - [[Velocar]] partial prototype
*[[MicroHouse 2]]
*[[MicroHouse 3]]
*[[MicroHouse 4]]
*Danny Epperson - PowerCube v6 in Austin, TX - [http://www.d33z.com/p/powercube.html]
*[[CEB Build in Chile]]
*[[CEB Build in India]]
*[[CEB Build in Texas 2014]]
*[[CEB Build - Rob Beddingfield]] - USA
*[[MarsTrac]]
*[[Nicaragua Replication]] - 2 brick presses and power cubes?

Note: counted 110 total machines as of end of 2014. 12 are 3D printers. 2 are the CEB presses and 4 power cubes in Nicaragua, thought the Nicaragua replication awaits confirmation. 27 not done by OSE headquarters, of these, 12 are brick presses. 8 countries of replication: USA, Chile, Nicaragua, Guatemala, China, India, Italy, Turkey.

=2013=
OSE builds:
*Laser Cutter - [http://opensourceecology.dozuki.com/c/Laser_Cutter_-_Modules]
*[[LifeTrac 5]]
*[[LifeTrac 6]]
*[[Backhoe Prototype 3]]
*[[Ironworker Prototype 3]]
*[[MicroHouse 1]]
*[[MicroPowerCube 1]]
*Lulzbot TAZ build - with CNC Mill Spindle - [[Aidan Williamson]]

Counted 73 machines as of end of 2013.

=Replication FAQ =
*'''Q: Ironworker''' - Is any documentation for prototype 3 available or is it just not ready to be released for replication at this point? I found a sketchup file but it doesn't appear to have enough information and most of the modules on the dozuki site do not have any content.
**'''A: The ironworker has been built and tested, but not documented well. We took it to desructive testing, so it's not a machine that we are currently using. See https://www.youtube.com/user/marcinose/search?view_as=subscriber&query=ironworker'''. However we are still using the earlier prototype, see [[Ironworker Genealogy]].
*'''Q: CNC Torch Table''' -There is a youtube video from the microfactory startup camp in which Marcin explained the history of the work on this and the ambitions for version 19.10 and was curious whether you had a rough timeframe in mind when you thought a prototype and documentation might be available whether it be a year, three years, five years, or so.
**'''A: [[CNC_Torch_Table_v19.10]] has some documentation, and we'll be publishing test and usage data as a result of the [[Summer X 2020]]'''
*'''Q: CNC Torch Table''' - From skimming though the documentation available thus far it looks like the table may be able to be reasonably replicated but it didn't look like it would be sufficient to piece together the electronics without a strong background in this. If the prototype for version 19.10 goes well following the Summer X 2020 workshops, do you anticipate full documentation being available shortly afterwards?
**'''A: Definitely
*'''Q: Power Cube''' - Which version would you recommend to run the CEB press? It looks like the power cube prototypes are generally 28 horsepower so I assumed that this was sufficient to run the CEB press cylinders at a decent pace and it appeared that version 7 had pretty clear documentation.
**'''A: [[Power Cube VII]] works, but it's more difficult to build, so we recommend the newest one, [[Power Cube v17.10]] for ease of build. We are still continuing development, and shifting to the [[Changfa Diesel]] in the next iteration for longevity.'''
*'''Q: Power Cube''' - Do you have an idea for when documentation for the Changfa Diesel version would be available? It looks like version 17.10 has 64 hp and 16 hp models and I was wondering if the 16 hp model would be sufficient to operate the new soil mixer/CEB press machine or is that a question that you wouldn't be able to answer until it is prototyped?
**'''A: 16 will work fine, you can do 17.10 and it will work. We will document the Changfa diesel in this summer as well.
*'''Q: CEB Press:''' Is the intention for the soil mixer to create a stockpile of stabilized material that would then be loaded into the CEB press with a loader or for the material to run from the chute of the soil mixer directly into the press? If the material is intended to run directly into the CEB press would the current version with their large hoppers be able to run in tandem since the chute appears to be lower than the hoppers of the CEB presses?
**'''A: The large hopper will be put on the soil mixer, and a small hopper would be on the actual brick press - see [[File:Mixerwithpress.png|50px]] and [[Soil Mixer 2019]] for more details.

= Archive =
*Old survey - Old 2012 Survey - [https://docs.google.com/a/opensourceecology.org/spreadsheets/d/1g7jaG5ZnF6m-n4NoVCTUXjqmzjNc9_KuoVI49ArYXZ4/edit#gid=0]

*For old ideas on Replication, check the [[Replication/Archive|Archive]].

=Links=
*[[D3D Replication]]
[[Category: Education]]
[[Category: Replication]]
*[[Distributive Enterprise]]
*[[Stages of Product Release]]

File:D3DUniversalv21.06Cadore.png

2022-09-09T10:30:48Z

Calligarov: Calligarov uploaded a new version of File:D3DUniversalv21.06Cadore.png

User:Calligarov/Vincenzo Calligaro Log

2022-03-09T11:24:48Z

Calligarov: /* Wed Mar 9, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Wed Mar 9, 2022=
[[D3D Universal v21.06 Product Assets]]

=Sat Mar 5, 2022=
[[LifeTrac v20.12]]. [[LifeTrac v20.12 Requirements + Value Proposition]]. [[LifeTrac v20.12 Industry Standards]]. [[LifeTrac v20.12 Conceptual Design]]. [[LifeTrac v20.12 Module Breakdown]]. [[LifeTrac v20.12 3D CAD]]. [[LifeTrac v20.12 Calculations]]

=Thu Feb 17, 2022=
[[D3D Universal v21.06]].[[D3D Universal v21.06 Unique Value Proposition]].[[D3D Universal v21.06 Product Assets]].[[D3D Universal v21.06 Product Webpage]]

=Thu Feb 10, 2022=
[[D3D Universal v21.06 Build Instructions#LAI Version| D3D Universal v21.06 Build Instructions LAI Version]]

=Sat Feb 05, 2022=
[[D3D Universal v21.06 Fabrication Drawings]]. [[Presentation Template]]

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

D3D Universal v21.06 Product Assets

2022-03-09T11:21:04Z

Calligarov: /* Infographics */

{{under construction}}

=Product Brochure=

{{Info|Source|This brochure has been taken from [[D3D Universal Product Page]] and should be updated replacing the photo}}

<html>
<img src="https://docs.google.com/drawings/d/e/2PACX-1vTSrxUGD_3ylEVl8G7NBUkGRbAtTDPh5fS5jcqLYOUMjX2PrzlbgZWBHH_tbI-nGLCSHvUYhbd26lwW/pub?w=483&h=267">
</html>

[https://docs.google.com/drawings/d/1F5mFd8UlzYzrbfdkiKruA3GyQgtT4MrbfvFI_7RJZnY/edit?usp=sharing edit]

<html>
<img src="https://docs.google.com/drawings/d/e/2PACX-1vTOxdktE1LpiwSn7OD6pUomyV9-YyLstbh6yYPMNBRE0bJr2IC_YP1TFXPkI6CcsC3t5YM89nWsMY_r/pub?w=481&h=541">
</html>

[https://docs.google.com/drawings/d/1mjvJ1xb_3A-GqhHaDPZuvhZusz1gj9B8peYh8aUjLwM/edit?usp=sharing edit]

=Photos=
[[File:D3DUniversalv2106.png|500px]]
[[File:HalogenHeatedBed.png|400px]]

[[Halogen Heat Bed]] photos and miscellaneous [[D3D Universal v21.06]] photos on Google Photos [https://photos.app.goo.gl/kGkMVgG9c1CkcN6eA]

=Infographics=

<html> <img src="https://docs.google.com/drawings/d/e/2PACX-1vRF-K2grRJEZ5GpA8N9ppo0vVtVHAN16eC0mSapzahDbpJRhN-NysxNx-e9LFJ9lekZRoTmQ0Y7In96/pub?w=479&h=329"> </html>

[https://docs.google.com/drawings/d/1PADLlZr1m-C_9WRoM4x3FflmDg3U_ErhT3qQeog4AAE/edit?usp=sharing edit]

<html> <img src="https://docs.google.com/drawings/d/e/2PACX-1vR60eFBuVamQv5nOa7AHo4NBVfpa7C6WnDWpn9cseRIDXR-gbj_xnpihVNdLgzqfHOE2IHg2G40pOMQ/pub?w=479&h=329"> </html>

[https://docs.google.com/drawings/d/1QDiEILObjH4Hl3vKTGnbWgmDTa8Aq1Yfbfw0UAiI9SQ/edit?usp=sharing edit]

<html> <img src="https://docs.google.com/drawings/d/e/2PACX-1vSkmkuAO7LdCJ2NiQOOPY5CpsRMOrER6NW0Z4d7FUJ4R0fpOaHFc8qiZPl7YaGsNECY1zdTkjSwxWZ8/pub?w=479&h=329"> </html>

[https://docs.google.com/drawings/d/1IF-PpuLUgfFAhW3C273YIH_yYyF5DISHp_ChfiH8Pkc/edit?usp=sharing edit]

<html> <img src="https://docs.google.com/drawings/d/e/2PACX-1vTCHQ7iVlgMrg8Fo9BYJUQLN9_2vdjzZKdV4wSiTaAc8rR-XFJPlGSSBcuxj5msajq0EN3E3ErD8gHj/pub?w=479&h=329"> </html>

[https://docs.google.com/drawings/d/1v_pkG4DL_XEtHS6h7lCrYHltBHxxmszhX1h89Ei2Ms8/edit?usp=sharing edit]

<html> <img src="https://docs.google.com/drawings/d/e/2PACX-1vT4bF1BUz5hDAJRx0DvYiIOio-gMNREGvx0NZOT80Egdxssc5DQOkifixUNn0pHdVw21Sjf_q_3mRTA/pub?w=479&h=329"> </html>

[https://docs.google.com/drawings/d/1X9n-efIUTkWtN5KBhqgoEKwas02NZ2DREQ-NZvMhJcg/edit?usp=sharing edit]

=Icons=
To Do

=Modules Videos=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/TH2Bgi7SXSY" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Exploded part diagram infographics=
To Do

=Functional infographics=
To Do

=Animations=
To Do

=Instructional Videos=
To Do

=Promotional Videos=
To Do

=Marketing copy=
To Do

[[Category:Business/Enterprise]] [[Category:Marketing]]

User:Calligarov/Vincenzo Calligaro Log

2022-03-05T15:45:29Z

Calligarov: /* Sat Mar 5, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Sat Mar 5, 2022=
[[LifeTrac v20.12]]. [[LifeTrac v20.12 Requirements + Value Proposition]]. [[LifeTrac v20.12 Industry Standards]]. [[LifeTrac v20.12 Conceptual Design]]. [[LifeTrac v20.12 Module Breakdown]]. [[LifeTrac v20.12 3D CAD]]. [[LifeTrac v20.12 Calculations]]

=Thu Feb 17, 2022=
[[D3D Universal v21.06]].[[D3D Universal v21.06 Unique Value Proposition]].[[D3D Universal v21.06 Product Assets]].[[D3D Universal v21.06 Product Webpage]]

=Thu Feb 10, 2022=
[[D3D Universal v21.06 Build Instructions#LAI Version| D3D Universal v21.06 Build Instructions LAI Version]]

=Sat Feb 05, 2022=
[[D3D Universal v21.06 Fabrication Drawings]]. [[Presentation Template]]

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

LifeTrac v20.12

2022-03-05T15:31:33Z

Calligarov:

{|style="float:right;border:1px solid black"
| {{Infobox
|name = Infobox
|bodystyle =
|title = LifeTrac v20.12
|titlestyle =

|image = [[File:LT2012frame.png|200px|alt=Example alt text]]
|imagestyle =
|caption = Short description
|captionstyle =
|headerstyle = background:#ccf;
|labelstyle = background:#ddf;
|datastyle =

|header1 = Specifications
|label1 = dfd
|data1 = dfd
|header2 =
|label2 = Product Ecology
|data2 = What other GVCS tools does this use?
|header3 =
|label3 = License
|data3 = [[OSHWA]] and [[OSI]] compliant. CC-BY-SA-4.0 International, GPLv3, [[DIN SPEC 3105]].
|header4 =
|label4 = Module 1
|data4 = Describe features of Module 1
|header5 =
|label5 = Module 2
|data5 = Describe features of Module 2
|header6 =
|label6 = Key Specification
|data6 = Key spec data point
|header7 =
|label7 = Construction
|data7 = Describe basic construction technique and materials
|header8 =
|label8 = Productivity
|data8 = Describe how this relates to industrial productivity on a small scale
|header9 = Completion Status
|label9 =
|data9 =
|header10 =
|label10 =
|data10 = Describe whether built, prototyped, etc. Link to relevant [[Genealogy]] and [[Status of Completion]].

|belowstyle = background:#ddf;
|below = Do you want more of this? [[Get Involved]]
}}
|}

=Development=

{| class="wikitable"
|+ Development Template
!
! Description
! Link to Work Product
! %

|-
! scope=row |
| '''DESIGN''' || ||

|-
! scope=row | 1
| [[Requirements + Value Proposition]] || [[LifeTrac v20.12 Requirements + Value Proposition]] || 0

|-
! scope=row | 2
| [[Industry_Standards]] || [[LifeTrac v20.12 Industry Standards]] || 0

|-
! scope=row | 3
| [[Conceptual Design]] || [[LifeTrac v20.12 Conceptual Design]] || 0

|-
! scope=row | 4
| [[Module Breakdown]] || [[LifeTrac v20.12 Module Breakdown]] || 0

|-
! scope=row | 5
| [[Design Guide]] || [[LifeTrac v20.12 Design Guide]] || 0

|-
! scope=row |
| '''TECHNICAL DESIGN''' || ||

|-
! scope=row | 6
| [[3D CAD]] || [[LifeTrac v20.12 3D CAD]] || 0

|-
! scope=row | 7
| [[Basic Calculations|Calculations]] || [[LifeTrac v20.12 Calculations]] || 0

|-
! scope=row | 8
| [[Electronics Design]] || [[LifeTrac v20.12 Electronics Design]] || 0

|-
! scope=row | 9
| [[Wiring and Plumbing]] || [[LifeTrac v20.12 Wiring and Plumbing]] || 0

|-
! scope=row | 10
| [[Software]] || [[LifeTrac v20.12 Software]] || 0

|-
! scope=row |
| '''BILL OF MATERIALS || ||

|-
! scope=row | 11
| [[Proper BOM|BOM]] || [[LifeTrac v20.12 BOM]] || 0

|-
! scope=row | 12
| [[vBOM]] || [[LifeTrac v20.12 vBOM]] || 0

|-
! scope=row | 13
| [[CAM Files]] || [[LifeTrac v20.12 CAM Files]] || 0

|-
! scope=row | 14
| [[Cut List]] || [[LifeTrac v20.12 Cut List]] || 0

|-
! scope=row |
| '''BUILD''' || ||

|-
! scope=row | 15
| [[Build Instructions]] || [[LifeTrac v20.12 Build Instructions]] || 0

|-
! scope=row | 16
| [[Fabrication Drawings]] || [[LifeTrac v20.12 Fabrication Drawings]] || 0

|-
! scope=row | 17
| [[Exploded Part Diagram]] || [[LifeTrac v20.12 Exploded Part Diagram]] || 0

|-
! scope=row | 18
| [[Production Engineering]] || [[LifeTrac v20.12 Production Engineering]] || 0

|-
! scope=row |
| '''LIFECYCLE DESIGN''' || ||

|-
! scope=row | 19
| [[Build Pictures and Video]] || [[LifeTrac v20.12 Build Pictures and Video]] || 0

|-
! scope=row | 20
| [[Data Collection]] || [[LifeTrac v20.12 Data Collection]] || 0

|-
! scope=row | 21
| [[Future Work]] || [[LifeTrac v20.12 Future Work]] || 0

|-
! scope=row | 22
| [[Troubleshooting and Repair]] || [[LifeTrac v20.12 Troubleshooting and Repair]] || 0

|}

=Enterprise=
{| class="wikitable"
|+ Enterprise Template
!
! Description
! Link to Work Product
! %

|-
! scope=row |
| '''PRODUCT''' || ||

|-
! scope=row | 0
| [[Benchmarking]] || [[LifeTrac v20.12 Benchmarking]] || 0

|-
! scope=row | 1
| [[Unique Value Proposition]] || [[LifeTrac v20.12 Unique Value Proposition]] || 0

|-
! scope=row | 2
| [[Product Strategy]] || [[LifeTrac v20.12 Product Strategy]] || 0

|-
! scope=row | 3
| [[Cost Structure]] || [[LifeTrac v20.12 Cost Structure]] || 0

|-
! scope=row | 4
| [[Business Plan]] || [[LifeTrac v20.12 Business Plan]] || 0

|-
! scope=row | 5
| [[Open Source Franchise]] || [[LifeTrac v20.12 Open Source Franchise]] || 0

|-
! scope=row |
| '''PRODUCTION || ||

|-
! scope=row | 6
| [[Training and Management]] || [[LifeTrac v20.12 Training and Management]] || 0

|-
! scope=row | 7
| [[Facility Design]] || [[LifeTrac v20.12 Facility Design]] || 0

|-
! scope=row | 8
| [[Supply Chain Development]] || [[LifeTrac v20.12 Supply Chain Development]] || 0

|-
! scope=row | 9
| [[Production]] || [[LifeTrac v20.12 Production]] || 0

|-
! scope=row | 10
| [[Quality Control]] || [[LifeTrac v20.12 Quality Control]] || 0

|-
! scope=row |
| '''MARKETING || ||

|-
! scope=row | 11
| [[Product Assets]] || [[LifeTrac v20.12 Product Assets]] || 0

|-
! scope=row | 12
| [[Marketing Strategy]] || [[LifeTrac v20.12 Marketing Strategy]] || 0
|-
! scope=row | 13
| [[Marketing Plan]] || [[LifeTrac v20.12 Marketing Plan]] || 0

|-
! scope=row | 14
| [[Product Webpage]] || [[LifeTrac v20.12 Product Webpage]] || 0

|-
! scope=row |
| '''SALES AND SUPPORT || ||

|-
! scope=row | 15
| [[Sales Strategy|Sales and Distribution Strategy]] || [[LifeTrac v20.12 Sales Strategy]] || 0

|-
! scope=row | 16
| [[Customer Support]] || [[LifeTrac v20.12 Customer Support]] || 0

|-
! scope=row | 17
| [[Shipping]] || [[LifeTrac v20.12 Shipping]] || 0

|-
! scope=row | 18
| [[Open Source Everything Store]] || [[LifeTrac v20.12 Open Source Everything Store]] || 0

|-
! scope=row |
| '''IMPROVEMENT''' || ||

|-
! scope=row | 19
| [[Marketing and Sales Data]] || [[LifeTrac v20.12 Marketing and Sales Data]] || 0

|-
! scope=row | 20
| [[Customer Feedback]] || [[LifeTrac v20.12 Customer Feedback]] || 0

|-
! scope=row | 21
| [[Continuing Improvement]] || [[LifeTrac v20.12 Continuing Improvement]] || 0

|-
! scope=row | 22
| [[Future Work]] || [[LifeTrac v20.12 Enterprise Future Work]] || 0

|}

=Technical=
*<strike>Motor - [https://s3.amazonaws.com/onehydraulicsdata/DATASHEETS/BMER2.pdf]</strike>

=Links=
*'''[[Universal Track Unit]]'''
*[[Sprocket Generator]]
*[[Hydraulic Motors]]
*[[100 Pitch Chain]]
*[[Tractor Genealogy]]

=More=

LifeTrac v20.12 3D CAD

2022-03-05T15:27:37Z

Calligarov: Created page with "=Summer X 2021 Version= *Frame - File:lt2012frame.fcstd *Shaft Assy - File:lt2012shaftassy.fcstd *Motor Assy - File:Hydmotorcouplerassy.fcstd *Square Clamp -..."

=[[Summer X 2021]] Version=

*Frame - [[File:lt2012frame.fcstd]]
*Shaft Assy - [[File:lt2012shaftassy.fcstd]]
*Motor Assy - [[File:Hydmotorcouplerassy.fcstd]]
*Square Clamp - [[File:squareclamp.fcstd]]
*'''Tractor''' - [[File:LT2012.fcstd]]

[[File:LT2012frame.png|400px]][[File:LT2012motorassy.png|100px]][[File:LT2012squareclamp.png|100px]]

=From [[Universal Track Unit]]=
[[File:dual_UTU.png|100px]][[File:utu_assy3.png|100px]][[File:utu_assy2.png|100px]][[File:utu_assy.png|100px]][[File:hydmotorcouplerassy.png|100px]][[File:throughkeywaysprocket.png|100px]][[File:Idlerslibrary.jpg|100px]]
[[File:2motorsanweesh.png|100px]][[File:trackunit.png|100px]][[File:senweesh.png|100px]][[File:addeddrivesprocket.png|100px]][[File:drivesprocket1.png|100px]][[File:trackwheel3.png|100px]][[File:trackwheel2.png|100px]][[File:trackwheel.png|100px]][[File:bmrs2.png|100px]][[File:EXT-M598WMB.png|100px]][[File:BigDriveSprocket.png|100px]][[File:ShaftSprocketCoupler.png|100px]][[File:DriveChain.png|50px]][[File:MotorDrive.png|100px]]
[[File:1inch875Bearing.png|100px]][[File:1inch875IdlerShaft.png|30px]][[File:SmallDriveSprocket.png|100px]][[File:TrackIdler.png|100px]][[File:1inch875DriveShaft.png|25px]][[File:TrackDrive.png|100px]][[File:TrackSprocketCoupler.png|100px]][[File:FrameCover.png|100px]][[File:17teeth100pitchSprocket.png|100px]][[File:35teeth100pitchSprocket.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:dual_UTU.png|'''Dual purpose Universal Track Unit Assembly. Can be driven either with wheel drive or track drive.''' - FreeCAD -[[File:dual_UTU.fcstd]]

File:utu_assy3.png|'''Universal Track Unit Assembly from parts.''' - FreeCAD -[[File:utu_assy2.fcstd]]

File:hydmotorcouplerassy.png|'''Hydraulic motor coupler assembly only.''' - FreeCAD -[[File:hydmotorcouplerassy.fcstd]]

File:throughkeywaysprocket.png|'''Through keyway hub with track drive.''' - FreeCAD -[[File:throughkeywaysprocket.fcstd]]

File:senweesh.png|'''Modular track wheel.''' - FreeCAD -[[File:trackwheel.fcstd]]

File:Idlerslibrary.jpg|'''Idler.''' Specification of 10" pipe sections used in idlers - [https://docs.google.com/presentation/d/1tB8kfA3sChpUEL0dQzfg9cUKoH3c-ooXWjsufW0bcDE/edit#slide=id.g6411dbe41_0_0] - 10.75" OD and .365" wall - FreeCAD -[[File:Idlerslibrary.fcstd]]

File:trackunit.png|'''Modular track unit track.''' Made using [[FreeCAD_101#Task_7:_Using_Path_Array_to_Make_Tracks_for_Tractors|Path Array]]. FreeCAD file -[[File:trackunittrack.fcstd]]

File:drivesprocket1.png|'''Track Drive Sprocket.''' - FreeCAD -[[File:drivesprocket1.fcstd]]

File:bearing.png|'''2" Bearing''' - FreeCAD -[[File:2inchbearing.fcstd]]

File:EXT-M598WMB.png|'''Extreme Hydraulics Motor EXT-M598WMB''' - FreeCAD -[[File:EXT-M598WMB.fcstd]].

File:BigDriveSprocket.png|'''Big motor drive sprocket''' - FreeCAD -[[File:BigDriveSprocket.fcstd]].

File:ShaftSprocketCoupler.png|'''Coupler''' for '''Small drive sprocket''' and '''Extreme Hydraulics Motor EXT-M598WMB''' - FreeCAD - [[File:ShaftSprocketCoupler.fcstd]]

File:DriveChain.png|'''Drive Chain''' made using [[100_Pitch_Chain#100_Chain|100 Pitch Chain]] and [[FreeCAD_101#Task_7:_Using_Path_Array_to_Make_Tracks_for_Tractors|Path Array]]- FreeCAD - [[File:DriveChain.fcstd]]

File:MotorDrive.png|'''Motor Drive module''', parts list in the file page- FreeCAD - [[File:MotorDrive.fcstd]]

File:1inch875Bearing.png|'''1 7/8" Bearing'''- FreeCAD - [[File:1inch875Bearing.fcstd]]

File:1inch875IdlerShaft.png|'''1 7/8" Track Idler Shaft'''- FreeCAD - [[File:1inch875IdlerShaft.fcstd]]

File:SmallDriveSprocket.png|'''Small Motor Drive Sprocket'''- FreeCAD - [[File:SmallDriveSprocket.fcstd]]

File:TrackIdler.png|'''Track Idler module'''- FreeCAD - [[File:TrackIdler.fcstd]]

File:1inch875DriveShaft.png|'''1 7/8" Track Drive Shaft'''- FreeCAD - [[File:1inch875DriveShaft.fcstd]]

File:TrackDrive.png|'''Track Drive module'''- FreeCAD - [[File:TrackDrive.fcstd]]

File:TrackSprocketCoupler.png|'''Coupler''' for '''Track Drive Sprocket''' and '''1 7/8" Track Idler Shaft''' or '''1 7/8" Track Drive Shaft'''- FreeCAD - [[File:TrackSprocketCoupler.fcstd]]

File:FrameCover.png|'''Frame Cover'''- FreeCAD - [[File:FrameCover.fcstd]]

File:17teeth100pitchSprocket.png|'''17 teeth 100 pitch Sprocket'''- FreeCAD - [[File:17teeth100pitchSprocket.fcstd]]

File:35teeth100pitchSprocket.png|'''35 teeth 100 pitch Sprocket'''- FreeCAD - [[File:35teeth100pitchSprocket.fcstd]]
</gallery>
'''Deprecated:'''

<gallery perrow=6>
File:bmrs2.png|'''Hydraulic motor, BMER-2-250.''' - FreeCAD -[[File:bmer2.FCStd]].

</gallery>

LifeTrac v20.12 Calculations

2022-03-05T15:24:03Z

Calligarov: Created page with "=Tracks= ==From [https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gb2ba4e7d93_0_11 LifeTrac v20.12 Work Doc]== <html> <ifram..."

=Tracks=

==From [https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gb2ba4e7d93_0_11 LifeTrac v20.12 Work Doc]==

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gb2ba4e7d93_0_11" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gb2ba4e7d93_0_11 edit]

==From [https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.ge25104a804_0_6 Universal Track Unit Work Doc]==

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQz_Wiw6coc-6XMiTxGZKQwQsI772thOmvAMqVgjntYXFfDDbQsFc5Qk2UDZ957v8Bb1WmxT8KsTysb/embed?start=false&loop=false&delayms=3000&slide=id.ge25104a804_0_6" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.ge25104a804_0_6 edit]

=Frame=

=[[Power Cube]]=

=Loader=

=3 Point Hitch=

=Shaft + PTO=

LifeTrac v20.12 Conceptual Design

2022-03-05T15:18:55Z

Calligarov: Created page with "=Tracks= ==From [https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_356 LifeTrac v20.12 Work Doc]== <html> <ifr..."

=Tracks=

==From [https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_356 LifeTrac v20.12 Work Doc]==

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.ge16598fa3a_0_13" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gge16598fa3a_0_13 edit]

==From [https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.gaa0bfefef1_0_4 Universal Track Unit Work Doc]==

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQz_Wiw6coc-6XMiTxGZKQwQsI772thOmvAMqVgjntYXFfDDbQsFc5Qk2UDZ957v8Bb1WmxT8KsTysb/embed?start=false&loop=false&delayms=3000&slide=id.gc9630c49cf_0_5" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.gc9630c49cf_0_5 edit]

=Frame=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gf2b2a83677_8_29" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gf2b2a83677_8_29 edit]

=[[Power Cube]]=

=Loader=

=3 Point Hitch=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_85" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_85 edit]

=Shaft + PTO=

LifeTrac v20.12 Industry Standards

2022-03-05T15:13:32Z

Calligarov:

LifeTrac v20.12 Requirements + Value Proposition

2022-03-05T15:08:46Z

Calligarov:

=Tracks=

==From [https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_356 LifeTrac v20.12 Work Doc]==

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gb2b1403b48_0_0" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gb2b1403b48_0_0 edit]

==From [https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.gaa0bfefef1_0_4 Universal Track Unit Work Doc]==

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQz_Wiw6coc-6XMiTxGZKQwQsI772thOmvAMqVgjntYXFfDDbQsFc5Qk2UDZ957v8Bb1WmxT8KsTysb/embed?start=false&loop=false&delayms=3000&slide=id.gb280d4ec70_0_24" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.gb280d4ec70_0_24 edit]

=Frame=

=[[Power Cube]]=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gb2b1403b48_0_45" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gb2b1403b48_0_45 edit]

=Loader=

=3 Point Hitch=

=Shaft + PTO=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gaa0bfefef1_0_4" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gaa0bfefef1_0_4 edit]

LifeTrac v20.12 Industry Standards

2022-03-05T13:38:41Z

Calligarov:

=Tracks=
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_356" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_356 edit]

=3 Point Hitch=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_0" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_0 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_27" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_27 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_45" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_45 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_65" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_65 edit]

LifeTrac v20.12 Requirements + Value Proposition

2022-03-05T13:38:05Z

Calligarov: Created page with "=Shaft + PTO= <html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=..."

=Shaft + PTO=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gaa0bfefef1_0_4" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gaa0bfefef1_0_4 edit]

LifeTrac v20.12 Industry Standards

2022-03-05T13:33:16Z

Calligarov: Created page with "=Tracks= <html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&..."

=Tracks=
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.gaa0bfefef1_0_4" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.gaa0bfefef1_0_4 edit]

=3 Point Hitch=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_0" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_0 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_27" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_27 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_45" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_45 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000&slide=id.g118c3400d4e_0_65" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g118c3400d4e_0_65 edit]

LifeTrac v20.12 Module Breakdown

2022-03-05T12:33:19Z

Calligarov: Created page with "*Universal Track Unit *Frame *Power Cube *Loader *3 Point Hitch *Shaft + PTO"

*[[Universal Track Unit]]
*Frame
*[[Power Cube]]
*Loader
*3 Point Hitch
*Shaft + PTO

LifeTrac v20.12

2022-03-05T12:30:21Z

Calligarov:

{|style="float:right;border:1px solid black"
| {{Infobox
|name = Infobox
|bodystyle =
|title = LifeTrac v20.12
|titlestyle =

|image = [[File:check.png|200px|alt=Example alt text]]
|imagestyle =
|caption = Short description
|captionstyle =
|headerstyle = background:#ccf;
|labelstyle = background:#ddf;
|datastyle =

|header1 = Specifications
|label1 = dfd
|data1 = dfd
|header2 =
|label2 = Product Ecology
|data2 = What other GVCS tools does this use?
|header3 =
|label3 = License
|data3 = [[OSHWA]] and [[OSI]] compliant. CC-BY-SA-4.0 International, GPLv3, [[DIN SPEC 3105]].
|header4 =
|label4 = Module 1
|data4 = Describe features of Module 1
|header5 =
|label5 = Module 2
|data5 = Describe features of Module 2
|header6 =
|label6 = Key Specification
|data6 = Key spec data point
|header7 =
|label7 = Construction
|data7 = Describe basic construction technique and materials
|header8 =
|label8 = Productivity
|data8 = Describe how this relates to industrial productivity on a small scale
|header9 = Completion Status
|label9 =
|data9 =
|header10 =
|label10 =
|data10 = Describe whether built, prototyped, etc. Link to relevant [[Genealogy]] and [[Status of Completion]].

|belowstyle = background:#ddf;
|below = Do you want more of this? [[Get Involved]]
}}
|}

=Development=

{| class="wikitable"
|+ Development Template
!
! Description
! Link to Work Product
! %

|-
! scope=row |
| '''DESIGN''' || ||

|-
! scope=row | 1
| [[Requirements + Value Proposition]] || [[LifeTrac v20.12 Requirements + Value Proposition]] || 0

|-
! scope=row | 2
| [[Industry_Standards]] || [[LifeTrac v20.12 Industry Standards]] || 0

|-
! scope=row | 3
| [[Conceptual Design]] || [[LifeTrac v20.12 Conceptual Design]] || 0

|-
! scope=row | 4
| [[Module Breakdown]] || [[LifeTrac v20.12 Module Breakdown]] || 0

|-
! scope=row | 5
| [[Design Guide]] || [[LifeTrac v20.12 Design Guide]] || 0

|-
! scope=row |
| '''TECHNICAL DESIGN''' || ||

|-
! scope=row | 6
| [[3D CAD]] || [[LifeTrac v20.12 3D CAD]] || 0

|-
! scope=row | 7
| [[Basic Calculations|Calculations]] || [[LifeTrac v20.12 Calculations]] || 0

|-
! scope=row | 8
| [[Electronics Design]] || [[LifeTrac v20.12 Electronics Design]] || 0

|-
! scope=row | 9
| [[Wiring and Plumbing]] || [[LifeTrac v20.12 Wiring and Plumbing]] || 0

|-
! scope=row | 10
| [[Software]] || [[LifeTrac v20.12 Software]] || 0

|-
! scope=row |
| '''BILL OF MATERIALS || ||

|-
! scope=row | 11
| [[Proper BOM|BOM]] || [[LifeTrac v20.12 BOM]] || 0

|-
! scope=row | 12
| [[vBOM]] || [[LifeTrac v20.12 vBOM]] || 0

|-
! scope=row | 13
| [[CAM Files]] || [[LifeTrac v20.12 CAM Files]] || 0

|-
! scope=row | 14
| [[Cut List]] || [[LifeTrac v20.12 Cut List]] || 0

|-
! scope=row |
| '''BUILD''' || ||

|-
! scope=row | 15
| [[Build Instructions]] || [[LifeTrac v20.12 Build Instructions]] || 0

|-
! scope=row | 16
| [[Fabrication Drawings]] || [[LifeTrac v20.12 Fabrication Drawings]] || 0

|-
! scope=row | 17
| [[Exploded Part Diagram]] || [[LifeTrac v20.12 Exploded Part Diagram]] || 0

|-
! scope=row | 18
| [[Production Engineering]] || [[LifeTrac v20.12 Production Engineering]] || 0

|-
! scope=row |
| '''LIFECYCLE DESIGN''' || ||

|-
! scope=row | 19
| [[Build Pictures and Video]] || [[LifeTrac v20.12 Build Pictures and Video]] || 0

|-
! scope=row | 20
| [[Data Collection]] || [[LifeTrac v20.12 Data Collection]] || 0

|-
! scope=row | 21
| [[Future Work]] || [[LifeTrac v20.12 Future Work]] || 0

|-
! scope=row | 22
| [[Troubleshooting and Repair]] || [[LifeTrac v20.12 Troubleshooting and Repair]] || 0

|}

=Enterprise=
{| class="wikitable"
|+ Enterprise Template
!
! Description
! Link to Work Product
! %

|-
! scope=row |
| '''PRODUCT''' || ||

|-
! scope=row | 0
| [[Benchmarking]] || [[LifeTrac v20.12 Benchmarking]] || 0

|-
! scope=row | 1
| [[Unique Value Proposition]] || [[LifeTrac v20.12 Unique Value Proposition]] || 0

|-
! scope=row | 2
| [[Product Strategy]] || [[LifeTrac v20.12 Product Strategy]] || 0

|-
! scope=row | 3
| [[Cost Structure]] || [[LifeTrac v20.12 Cost Structure]] || 0

|-
! scope=row | 4
| [[Business Plan]] || [[LifeTrac v20.12 Business Plan]] || 0

|-
! scope=row | 5
| [[Open Source Franchise]] || [[LifeTrac v20.12 Open Source Franchise]] || 0

|-
! scope=row |
| '''PRODUCTION || ||

|-
! scope=row | 6
| [[Training and Management]] || [[LifeTrac v20.12 Training and Management]] || 0

|-
! scope=row | 7
| [[Facility Design]] || [[LifeTrac v20.12 Facility Design]] || 0

|-
! scope=row | 8
| [[Supply Chain Development]] || [[LifeTrac v20.12 Supply Chain Development]] || 0

|-
! scope=row | 9
| [[Production]] || [[LifeTrac v20.12 Production]] || 0

|-
! scope=row | 10
| [[Quality Control]] || [[LifeTrac v20.12 Quality Control]] || 0

|-
! scope=row |
| '''MARKETING || ||

|-
! scope=row | 11
| [[Product Assets]] || [[LifeTrac v20.12 Product Assets]] || 0

|-
! scope=row | 12
| [[Marketing Strategy]] || [[LifeTrac v20.12 Marketing Strategy]] || 0
|-
! scope=row | 13
| [[Marketing Plan]] || [[LifeTrac v20.12 Marketing Plan]] || 0

|-
! scope=row | 14
| [[Product Webpage]] || [[LifeTrac v20.12 Product Webpage]] || 0

|-
! scope=row |
| '''SALES AND SUPPORT || ||

|-
! scope=row | 15
| [[Sales Strategy|Sales and Distribution Strategy]] || [[LifeTrac v20.12 Sales Strategy]] || 0

|-
! scope=row | 16
| [[Customer Support]] || [[LifeTrac v20.12 Customer Support]] || 0

|-
! scope=row | 17
| [[Shipping]] || [[LifeTrac v20.12 Shipping]] || 0

|-
! scope=row | 18
| [[Open Source Everything Store]] || [[LifeTrac v20.12 Open Source Everything Store]] || 0

|-
! scope=row |
| '''IMPROVEMENT''' || ||

|-
! scope=row | 19
| [[Marketing and Sales Data]] || [[LifeTrac v20.12 Marketing and Sales Data]] || 0

|-
! scope=row | 20
| [[Customer Feedback]] || [[LifeTrac v20.12 Customer Feedback]] || 0

|-
! scope=row | 21
| [[Continuing Improvement]] || [[LifeTrac v20.12 Continuing Improvement]] || 0

|-
! scope=row | 22
| [[Future Work]] || [[LifeTrac v20.12 Enterprise Future Work]] || 0

|}

=Working Doc=
==Motor Selection==
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRa5WpmVYyvLmuFAl7gaYKIhCvnEmRFr5TW3gs11X9F0GinmWa3NkqpFpgnSn9Rzm0JNORVAbSWLMNd/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1U0osWvgXh0gPWDxBUiAD8muZRWxSSIIRhxxDwBxVmXk/edit#slide=id.g5c3be0ce2d_1_28 edit]

==Track Unit Work Doc==

Note that modularity is being built in so that the drive unit can handle both track or wheel drive.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQz_Wiw6coc-6XMiTxGZKQwQsI772thOmvAMqVgjntYXFfDDbQsFc5Qk2UDZ957v8Bb1WmxT8KsTysb/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1yDoMwSOamPejJbfenq1B142LQL0vgvrjkJaQ3OGL5uI/edit#slide=id.gb280d4ec70_0_24 edit]

=CAD 2 - [[Summer X 2021]] Version=

*Frame - [[File:lt2012frame.fcstd]]
*Shaft Assy - [[File:lt2012shaftassy.fcstd]]
*Motor Assy - [[File:Hydmotorcouplerassy.fcstd]]
*Square Clamp - [[File:squareclamp.fcstd]]
*'''Tractor''' - [[File:LT2012.fcstd]]

[[File:LT2012frame.png|400px]][[File:LT2012motorassy.png|100px]][[File:LT2012squareclamp.png|100px]]

=CAD=
[[File:dual_UTU.png|100px]][[File:utu_assy3.png|100px]][[File:utu_assy2.png|100px]][[File:utu_assy.png|100px]][[File:hydmotorcouplerassy.png|100px]][[File:throughkeywaysprocket.png|100px]][[File:Idlerslibrary.jpg|100px]]
[[File:2motorsanweesh.png|100px]][[File:trackunit.png|100px]][[File:senweesh.png|100px]][[File:addeddrivesprocket.png|100px]][[File:drivesprocket1.png|100px]][[File:trackwheel3.png|100px]][[File:trackwheel2.png|100px]][[File:trackwheel.png|100px]][[File:bmrs2.png|100px]][[File:EXT-M598WMB.png|100px]][[File:BigDriveSprocket.png|100px]][[File:ShaftSprocketCoupler.png|100px]][[File:DriveChain.png|50px]][[File:MotorDrive.png|100px]]
[[File:1inch875Bearing.png|100px]][[File:1inch875IdlerShaft.png|30px]][[File:SmallDriveSprocket.png|100px]][[File:TrackIdler.png|100px]][[File:1inch875DriveShaft.png|25px]][[File:TrackDrive.png|100px]][[File:TrackSprocketCoupler.png|100px]][[File:FrameCover.png|100px]][[File:17teeth100pitchSprocket.png|100px]][[File:35teeth100pitchSprocket.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:dual_UTU.png|'''Dual purpose Universal Track Unit Assembly. Can be driven either with wheel drive or track drive.''' - FreeCAD -[[File:dual_UTU.fcstd]]

File:utu_assy3.png|'''Universal Track Unit Assembly from parts.''' - FreeCAD -[[File:utu_assy2.fcstd]]

File:hydmotorcouplerassy.png|'''Hydraulic motor coupler assembly only.''' - FreeCAD -[[File:hydmotorcouplerassy.fcstd]]

File:throughkeywaysprocket.png|'''Through keyway hub with track drive.''' - FreeCAD -[[File:throughkeywaysprocket.fcstd]]

File:senweesh.png|'''Modular track wheel.''' - FreeCAD -[[File:trackwheel.fcstd]]

File:Idlerslibrary.jpg|'''Idler.''' Specification of 10" pipe sections used in idlers - [https://docs.google.com/presentation/d/1tB8kfA3sChpUEL0dQzfg9cUKoH3c-ooXWjsufW0bcDE/edit#slide=id.g6411dbe41_0_0] - 10.75" OD and .365" wall - FreeCAD -[[File:Idlerslibrary.fcstd]]

File:trackunit.png|'''Modular track unit track.''' Made using [[FreeCAD_101#Task_7:_Using_Path_Array_to_Make_Tracks_for_Tractors|Path Array]]. FreeCAD file -[[File:trackunittrack.fcstd]]

File:drivesprocket1.png|'''Track Drive Sprocket.''' - FreeCAD -[[File:drivesprocket1.fcstd]]

File:bearing.png|'''2" Bearing''' - FreeCAD -[[File:2inchbearing.fcstd]]

File:EXT-M598WMB.png|'''Extreme Hydraulics Motor EXT-M598WMB''' - FreeCAD -[[File:EXT-M598WMB.fcstd]].

File:BigDriveSprocket.png|'''Big motor drive sprocket''' - FreeCAD -[[File:BigDriveSprocket.fcstd]].

File:ShaftSprocketCoupler.png|'''Coupler''' for '''Small drive sprocket''' and '''Extreme Hydraulics Motor EXT-M598WMB''' - FreeCAD - [[File:ShaftSprocketCoupler.fcstd]]

File:DriveChain.png|'''Drive Chain''' made using [[100_Pitch_Chain#100_Chain|100 Pitch Chain]] and [[FreeCAD_101#Task_7:_Using_Path_Array_to_Make_Tracks_for_Tractors|Path Array]]- FreeCAD - [[File:DriveChain.fcstd]]

File:MotorDrive.png|'''Motor Drive module''', parts list in the file page- FreeCAD - [[File:MotorDrive.fcstd]]

File:1inch875Bearing.png|'''1 7/8" Bearing'''- FreeCAD - [[File:1inch875Bearing.fcstd]]

File:1inch875IdlerShaft.png|'''1 7/8" Track Idler Shaft'''- FreeCAD - [[File:1inch875IdlerShaft.fcstd]]

File:SmallDriveSprocket.png|'''Small Motor Drive Sprocket'''- FreeCAD - [[File:SmallDriveSprocket.fcstd]]

File:TrackIdler.png|'''Track Idler module'''- FreeCAD - [[File:TrackIdler.fcstd]]

File:1inch875DriveShaft.png|'''1 7/8" Track Drive Shaft'''- FreeCAD - [[File:1inch875DriveShaft.fcstd]]

File:TrackDrive.png|'''Track Drive module'''- FreeCAD - [[File:TrackDrive.fcstd]]

File:TrackSprocketCoupler.png|'''Coupler''' for '''Track Drive Sprocket''' and '''1 7/8" Track Idler Shaft''' or '''1 7/8" Track Drive Shaft'''- FreeCAD - [[File:TrackSprocketCoupler.fcstd]]

File:FrameCover.png|'''Frame Cover'''- FreeCAD - [[File:FrameCover.fcstd]]

File:17teeth100pitchSprocket.png|'''17 teeth 100 pitch Sprocket'''- FreeCAD - [[File:17teeth100pitchSprocket.fcstd]]

File:35teeth100pitchSprocket.png|'''35 teeth 100 pitch Sprocket'''- FreeCAD - [[File:35teeth100pitchSprocket.fcstd]]
</gallery>
'''Deprecated:'''

<gallery perrow=6>
File:bmrs2.png|'''Hydraulic motor, BMER-2-250.''' - FreeCAD -[[File:bmer2.FCStd]].

</gallery>

=Technical=
*<strike>Motor - [https://s3.amazonaws.com/onehydraulicsdata/DATASHEETS/BMER2.pdf]</strike>

=Links=
*'''[[Universal Track Unit]]'''
*[[Sprocket Generator]]
*[[Hydraulic Motors]]
*[[100 Pitch Chain]]
*[[Tractor Genealogy]]

=More=

User:Calligarov/Vincenzo Calligaro Log

2022-02-17T17:43:29Z

Calligarov: /* Thu Feb 17, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Thu Feb 17, 2022=
[[D3D Universal v21.06]].[[D3D Universal v21.06 Unique Value Proposition]].[[D3D Universal v21.06 Product Assets]].[[D3D Universal v21.06 Product Webpage]]

=Thu Feb 10, 2022=
[[D3D Universal v21.06 Build Instructions#LAI Version| D3D Universal v21.06 Build Instructions LAI Version]]

=Sat Feb 05, 2022=
[[D3D Universal v21.06 Fabrication Drawings]]. [[Presentation Template]]

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

D3D Universal v21.06 Product Webpage

2022-02-17T17:23:55Z

Calligarov: Created page with "{{Under construction}} {{Info|Source and Usage|This webpage is made using [https://www.opensourceecology.org/d3d-universal-2/ D3D Universal 2 Official product webpage] as sta..."

{{Under construction}}

{{Info|Source and Usage|This webpage is made using [https://www.opensourceecology.org/d3d-universal-2/ D3D Universal 2 Official product webpage] as starting point and modified to contain the info that describe the [[D3D Universal v21.06]]. To use this webpage on your website, enter in the view source / edit mode of this page and copy the content between the <nowiki> <html> and </html> </nowiki> tags in the [[D3D_Universal_v21.06_Product_Webpage#Raw_HTML| Raw HTML]] section of this wiki page.}}

=Raw HTML=

<html>

<div id="main" class="clearfix">

<div id="content" class="twelvecol ">

<div id="post-11814" class="post-11814 page type-page status-publish hentry">

<div class="entry-content">

<p><img src="https://docs.google.com/drawings/d/e/2PACX-1vTSrxUGD_3ylEVl8G7NBUkGRbAtTDPh5fS5jcqLYOUMjX2PrzlbgZWBHH_tbI-nGLCSHvUYhbd26lwW/pub?w=1450&h=800"></p>
<h4 style="background: red; font-size: xx-large;">Add here other photos, if needed</h4>
<div class="header-fancy"><span>How to Order the D3D Universal</span></div>
<p>We include a free Collaborative Design Webinar with the D3D Universal kit, where you can learn how to work with a team of world-changers on design that makes a difference. We teach you how to use the D3D Universal in prototyping and in collaborative design. If you would like to join a bigger effort, we’ll show you how you can get involved. The webinar is a crash course on open source hardware. The webinar offers you an entry point where you will learn, you will build relationships and friendships, you will have fun, and you will be blown away by what you learn about the power of open collaboration. For those who are interested, the webinar is an entry point for continuing meetings for open source collaborative design, where we choose meaningful projects to work on, with the goal of designing and building viable products that can be produced in a new world of open design and Open Source Microfactories in every community. This is a lifetime opportunity to change the world.</p>
<p>Whether you just want the machine, or you would like participate in the Webinar – please use the registration below. Or you can send a check in the mail to avoid transaction fees. Participation in the webinar is completely optional. You can email info at opensourceecology dot org with any questions.</p>
<h4>D3D Universal Kit</h4>
<p>Includes full parts kit for the D3D Universal3D printer. Some simple soldering required. Includes the Collaborative Design Webinar. Free shipping in the USA.</p>
<h4>D3D Universal</h4>
<p>Fully built and tested machine, ready to print out of the box. Includes the Collaborative Design Webinar. Free shpping in the USA.</p>
<div> <h4 style="background: red; font-size: xx-large;">Add here the Shop button</h4> </div>
<p><img src="https://docs.google.com/drawings/d/e/2PACX-1vTOxdktE1LpiwSn7OD6pUomyV9-YyLstbh6yYPMNBRE0bJr2IC_YP1TFXPkI6CcsC3t5YM89nWsMY_r/pub?w=1442&h=1624"></p>
<div class="header-fancy"><span>D3D Universal Features</span></div>
<ol>
<li><b>Universal Gearless Extruder</b>. Our unique design works well with both 1.75 and 3 mm filament, and its ClogFree exposed filament path allows for clogs to be cleared in seconds. No other 3D printer that we know of uses 3 mm filament without using a geardown, and we also know of no other extruder that accepts both 1.75 mm and 3 mm filament without any modification.</li>
<li><b>Interchangeable Tool Heads</b>. You can attach other toolheads simply by removing one bolt. D3D Universal ships with a spring-loaded pen plotter attachment with automatic bed leveling probe so you can print designs on flat substrates such as paper, plywood, metal, cardboard, plastic, or t-shirts. You can attach any pen or marker. We plan on releasing a vinyl cutter, CNC mill/drill attachment, and laser cutter head in February, 2020.</li>
<li><b>Powered by FreeCAD</b> – give extra power to D3D Universal by modifying its parts. We provide full part libraries for the entire design in FreeCAD, the premiere open source CAD package. You can modify parts, and print new versions readily. And – we can teach you a streamlined FreeCAD workflow in a one hour webinar.</li>
<li><b>Halogen Heat Bed</b> – The heated bed uses common low cost R7S halogen bulbs to heat the print surface. The halogen bulbs, using just 1/4 of their rated power, heat the surface in short time while preserving the lifetime of the bulbs themself.</li>
<li><b>Automatic Bed Leveling</b> – using an inductive height sensor, the D3D Universal does the bed leveling for you so that the first layer attaches firmly to the print bed. No need for an involved calibration procedure – just print without doing any adjustment and the printer probes the bed at 4 points to determine the level of the bed. All you need to do is to turn a knob on the control panel until the nozzle prints exactly on the surface.</li>
<li><b>Eco-Friendly</b> – our printer uses 67W, orabout 1/3 the energy of typical printers. This may not sound like a lot, but if you are in Germany with 33 cent electricity rates and you are running a print farm, that is $400 electricity costs saved per printer per year!</li>
<li><b>Large Heater Block and Nozzles</b> – D3D Universal ships stock with the Volcano heater block and 1.2 nozzle for fast printing and stronger prints for prototyping and production. Also comes with 0.8 and 0.4 nozzles. We found that using 1.2 mm nozzles with 0.4 mm layer gives us excellent quality and strength and super-fast production rates.</li>
<li><b>Self-replicating</b> – print more parts and build more D3D Universal printers. The limit here is that you still have to use metal parts that you buy from the store – but you can make 1/3 of the unique parts with the printer itself.</li>
<li><b><a title="Distributive Enterprise" href="https://wiki.opensourceecology.org/wiki/Distributive_Enterprise">Distributive Enterprise</a></b>. Our goal is to shift the world from consumerism to a maker society. And we have a clear way for you to do this: we will buy printed parts for the 3D printer from you, so you effectively become our supplier! This is an education in itself – as you will need to learn specific quality control methods so that you can guarantee to us that your parts will work. Find out more about this unique opportunity at <a class="new" title="D3D Universal Part Production (page does not exist)" href="https://wiki.opensourceecology.org/index.php?title=D3D_Universal_Part_Production&action=edit&redlink=1">D3D Universal Part Production</a></li>
<li><b>OSE Lifetime Design Guarantee</b> – We pay attention to simplicity, desing-for-repair, design-for-disassembly, and robustness. We use a 100% open source design with full documentation in FreeCAD. We use common, off-the-shelf parts in our design You can improve D3D Universal with time by modifications or tool head additions – no specially-fabricated parts or exotic components are necessary. This means that YOU can decide how long you would like to continue using the machine, where ready replacement parts and our design-for-repair make this easy by using parts that you print, parts from a local hardware store, or from Amazon. Even if we ever go out of business, you will be able to use, maintain, and upgrade your machine.</li>
<li><b><a class="mw-redirect" title="Universal Axis" href="https://wiki.opensourceecology.org/wiki/Universal_Axis">Universal Axis</a></b> belt-driven design. CNC motion system for modification and scalability. Can be scaled up 100x in size and 2000x in torque-handling ability by upsizing from 8 mm prcision motion rods up to 3 inch shaft.</li>
<li><b>Innovative Belt-Driven Z axis</b> allows for fast Z motion (such as with plotter function) and makes it impossible for a crash into the bed to destroy the print surface.</li>
<li><strong>Uses the <a title="Universal Controller" href="https://wiki.opensourceecology.org/wiki/Universal_Controller">Universal Controller</a></strong>, a modular controller for 3D printers, other CNC machines, and other mechatronic devices. The Universal Controller in D3D Universal is identical to the one used in our larger production printers, CNC circuit mill, and CNC Torch table, so it’s part of a robust product ecology that is relevant to much more than the D3D Universal.</li>
<li><strong>LCD Screen</strong> – Uses the common Reprap Discount Full Graphic Smart Controller for control and information display. Keep track of print time and extruder temperature, print speed, and adjust parameters directly on the printer.</li>
<li><b>Marlin Inside</b> – uses the open source and most widely used firmware in the world – Marlin, with a great support community and decent documentation</li>
<li><b>Powered by RAMPS</b> – uses the most common 3D printer controller in the world, which is open source so you will always be able to find a replacement or make one yourself</li>
<li><b>Safe Design</b> – uses an on-board GFCI protector to eliminate the risk of severe electric shock</li>
<li><b>Product Ecology</b> – The D3D Universal is part of a larger product ecology of machines with interchangeable parts. It can make parts for other machines.</li>
<li><b>Bootstrapping to the Open Source Microfactory</b> – As part of the OSE product ecology – we allow for easy bootstrapping. D3D Universal can be used to make all the 3D printed parts for our dedicated production printer, the D3D Pro. It can also be used to make all the parts for our CNC Torch Table.</li>
<li><b>OSHWA Certification</b> – we are applying for the Open Source Hardware Association certification as an official artifact of open hardware to be shared with the world.</li>
</ol>
<div class="header-fancy"><span>D3D Specifications</span></div>
<ul>
<li>Print area – 6″x6″x6″</li>
<li>Energy usage – 67W</li>
<li>Stock nozzles – 1.2 mm. 0.8 mm and 0.4 mm are included</li>
<li>System voltage – 24V system</li>
<li>Print Surface – Buildtak</li>
<li>Firmware – Marlin</li>
<li>Controller – modular controller with GFCI outlet, with 5V/24V RAMPS 1.4 board and Reprap Discount Full Graphic Smart Controller LCD screen. Arduino is fed with 5V.</li>
<li>Untethered printing using SD card and SD card reader</li>
<li>Can use USB connection for printing</li>
<li>Slicing Software – Lulzbot Cura, or any other slicer</li>
<li>Extruder – OSE’s Universal Gearless Extruder, direct drive, no gearing, works with 1.75 and 3 mm filament</li>
<li>Heater block – E3D Volcano clone with 40W heater and 24V heater element</li>
<li>Filament – 3 mm or 1.75 mm filament using the same extruder</li>
<li>Built Dimensions (without filament spool) – approximately 14x16x16 inch (36x40x40 cm)</li>
<li>Weight – 6.4 kg (14.2 lb)</li>
<li>Shipping dimensions – 6 x 12 x 12 inch for kit</li>
<li>Maximum extrusion rate – about 5 lb/24 hours</li>
<li>Motion System – belt-drive <a class="mw-redirect" title="Universal Axis" href="https://wiki.opensourceecology.org/wiki/Universal_Axis">Universal Axis</a> with 8 mm rods</li>
<li>Automatic bed leveling using an 8 mm distance sensing inductive probe that stays far away from the print surface compared to standard 4 mm sensors.</li>
<li>Supported materials – PLA, PETG, ABS, Flexible materials</li>
</ul>
<div class="header-fancy"><span>9 Reasons Why You Want a D3D Universal</span></div>
<ul>
<li><strong>Robust, uncloggable extruder</strong> – after frustration with leading brands, we decided to design our own and succeeded. Not only that, we discovered that our design works great with 3 mm filament, apparently making ours the first extruder in the world that does not use a geardown for 3 mm filament.* (*We’ll be glad to retract this claim if someone indicates otherwise).*Fast print speeds with large heater block and large stock nozzle. This is afforded by the stock volcano heater block, and we will be designing a larger heater block in the future so we can print rubber tires and tracks for our open source tractors.</li>
<li><strong>Lowest unique part count of any 3D printer in the world</strong> – means more simplicity, less down-time potential, easier troubleshooting, and more ability to repair and maintain</li>
<li><strong>OSE lifetime design guarantee</strong> – you get to decide the lifetime your machine. Breakage, costly or impossible repairs, lack of parts, or lack of support do not play a role in determining the useful lifetime of this product.</li>
<li><strong>Great performance with 3 mm flexible filaments</strong> – we have shorter filament path-to- than the leading Titan Aero, and are leagues over any Bowden</li>
<li><strong>Only extruder that works equally well with 1.75 and 3mm filament</strong> (except for rubber – we do not recommend our extruder with 1.75 rubber filaments, nor do we recommend using 1.75 mm at all for any flexible filament, as pushing a <i>flexible noodle</i> will make it bend and it will clog your extruder). We think that this is a big deal – as <em>working</em> gearless extruders for 3 mm filament are unheard of. But we like to break rules. Read more about <a href="https://wiki.opensourceecology.org/wiki/Why_a_Gearless_Extruder_Works_for_3_mm_Filament">why a gearless extruder works</a>.</li>
<li><strong>Great community support</strong> – by using the popular Marlin, RAMPS, Cura, and FreeCAD software – we are benefitting from large user communities for support. This is quite the opposite of highly custom products that can be supported only by specially-trained and dedicated staff, which may disappear if a company goes out of business.</li>
<li><strong>Open Source Manufacturing</strong> – We are serious about open source production and <a href="https://wiki.opensourceecology.org/wiki/Distributive_Enterprise">Distributive Enterprise</a>. We can train you to make 3D printed parts for D3D Universal – using this very same D3D Universal printer! We require that you learn our distributed quality control procedures – and then we can certify you to be an authorized part supplier – and we will buy parts from you at the same fully-accounted cost that it would take us to produce the parts in house. We are interested in win-win situations where open source economics become a de-facto standard – just like open source software has now become a de-facto standard. You can help us get there. We can even train you to produce the 3D printers themselves – either independently or certified under the OSE brand. Email info at opensourceecology dot org to get started.</li>
<li><strong>Joining a project to change the world</strong>. This is part of a continuing and ongoing open source product development effort to create a transparent and inclusive economy of abundance.</li>
</ul>
<p><img class="aligncenter" src="https://docs.google.com/drawings/d/e/2PACX-1vRjeystM5hoiNUPjpjwBgztqsLGZ4_yojgRxXOHVhkcmG0ocP8H8AIA0mrv40oxagWhHNW4GQndSS3t/pub?w=489&h=214"></p>

</div>

</div>

</div>

</div>

</html>

[[Category:Business/Enterprise]] [[Category:Marketing]]

D3D Universal v21.06 Product Assets

2022-02-17T15:22:07Z

Calligarov: /* Product Brochure */

D3D Universal v21.06 Product Assets

2022-02-17T15:12:09Z

Calligarov: /* Modules Videos */

D3D Universal v21.06 Product Assets

2022-02-17T15:10:38Z

Calligarov: /* Photos */

D3D Universal v21.06 Product Assets

2022-02-17T15:03:38Z

Calligarov: /* Product Brochure */

D3D Universal v21.06

2022-02-17T14:50:27Z

Calligarov:

{|style="float:right;border:1px solid black"
| {{Infobox
|name = Infobox
|bodystyle =
|title = D3D Universal v21.06
|titlestyle =

|image = [[File:D3DUniversalv2106.png|200px|alt=Example alt text]]
|imagestyle =
|caption = Simple entry level printer for education and production.
|captionstyle =
|headerstyle = background:#ccf;
|labelstyle = background:#ddf;
|datastyle =

|header1 = Specifications
|label1 = dfd
|data1 = dfd
|header2 =
|label2 = Product Ecology
|data2 = Uses 8 mm [[Universal Axis]]
|header3 =
|label3 = License
|data3 = [[OSHWA]] and [[OSI]] compliant. CC-BY-SA-4.0 International, GPLv3, [[DIN SPEC 3105]].
|header4 =
|label4 = Extruder
|data4 = Uses OSE's [[Universal Gearless Extruder]]
|header5 =
|label5 = Heated Bed
|data5 = [[Halogen Heat Bed]]
|header6 =
|label6 = Safety Features
|data6 = GFCI protected system
|header7 =
|label7 = Construction
|data7 = Metal/plastic composite and off-the-shelf parts
|header8 =
|label8 = Productivity
|data8 = Comes stock with Volcano heater block, 40w, and 1.2 mm nozzle for 5 lb/day print rate
|header9 = Completion Status
|label9 =
|data9 =
|header10 =
|label10 =
|data10 = Last version build: [[D3D Universal v20.07]]. See [[3D Printer Genealogy]] and [[Status of Completion]].

|belowstyle = background:#ddf;
|below = Do you want more of this? [[Get Involved]]
}}
|}

=Development=

{| class="wikitable"
|+ Development Template
!
! Description
! Link to Work Product
! %

|-
! scope=row |
| '''DESIGN''' || ||

|-
! scope=row | 1
| [[Requirements + Value Proposition]] || [[D3D Universal v21.06 Requirements + Value Proposition]] || 0

|-
! scope=row | 2
| [[Industry_Standards]] || [[D3D Universal v21.06 Industry Standards]] || 0

|-
! scope=row | 3
| [[Conceptual Design]] || [[D3D Universal v21.06 Conceptual Design]] || 0

|-
! scope=row | 4
| [[Module Breakdown]] || [[D3D Universal v21.06 Module Breakdown]] || 0

|-
! scope=row | 5
| [[Design Guide]] || [[D3D Universal v21.06 Design Guide]] || 0

|-
! scope=row |
| '''TECHNICAL DESIGN''' || ||

|-
! scope=row | 6
| [[3D CAD]] || [[D3D Universal v21.06 3D CAD]] || 0

|-
! scope=row | 7
| [[Basic Calculations|Calculations]] || [[D3D Universal v21.06 Calculations]] || 0

|-
! scope=row | 8
| [[Electronics Design]] || [[D3D Universal v21.06 Electronics Design]] || 0

|-
! scope=row | 9
| [[Wiring and Plumbing]] || [[D3D Universal v21.06 Wiring and Plumbing]] || 0

|-
! scope=row | 10
| [[Software]] || [[D3D Universal v21.06 Software]] || 0

|-
! scope=row |
| '''BILL OF MATERIALS || ||

|-
! scope=row | 11
| [[Proper BOM|BOM]] || [[D3D Universal v21.06 BOM]] || 0

|-
! scope=row | 12
| [[vBOM]] || [[D3D Universal v21.06 vBOM]] || 0

|-
! scope=row | 13
| [[CAM Files]] || [[D3D Universal v21.06 CAM Files]] || 0

|-
! scope=row | 14
| [[Cut List]] || [[D3D Universal v21.06 Cut List]] || 0

|-
! scope=row |
| '''BUILD''' || ||

|-
! scope=row | 15
| [[Build Instructions]] || [[D3D Universal v21.06 Build Instructions]] || 0

|-
! scope=row | 16
| [[Fabrication Drawings]] || [[D3D Universal v21.06 Fabrication Drawings]] || 0

|-
! scope=row | 17
| [[Exploded Part Diagram]] || [[D3D Universal v21.06 Exploded Part Diagram]] || 0

|-
! scope=row | 18
| [[Production Engineering]] || [[D3D Universal v21.06 Production Engineering]] || 0

|-
! scope=row |
| '''LIFECYCLE DESIGN''' || ||

|-
! scope=row | 19
| [[Build Pictures and Video]] || [[D3D Universal v21.06 Build Pictures and Video]] || 0

|-
! scope=row | 20
| [[Data Collection]] || [[D3D Universal v21.06 Data Collection]] || 0

|-
! scope=row | 21
| [[Future Work]] || [[D3D Universal v21.06 Future Work]] || 0

|-
! scope=row | 22
| [[Troubleshooting and Repair]] || [[D3D Universal v21.06 Troubleshooting and Repair]] || 0

|}

=Enterprise=

{| class="wikitable"
|+ Enterprise Template
!
! Description
! Link to Work Product
! %

|-
! scope=row |
| '''PRODUCT''' || ||

|-
! scope=row | 0
| [[Benchmarking]] || [[D3D Universal v21.06 Benchmarking]] || 0

|-
! scope=row | 1
| [[Unique Value Proposition]] || [[D3D Universal v21.06 Unique Value Proposition]] || 0

|-
! scope=row | 2
| [[Product Strategy]] || [[D3D Universal v21.06 Product Strategy]] || 0

|-
! scope=row | 3
| [[Cost Structure]] || [[D3D Universal v21.06 Cost Structure]] || 0

|-
! scope=row | 4
| [[Business Plan]] || [[D3D Universal v21.06 Business Plan]] || 0

|-
! scope=row | 5
| [[Open Source Franchise]] || [[D3D Universal v21.06 Open Source Franchise]] || 0

|-
! scope=row |
| '''PRODUCTION || ||

|-
! scope=row | 6
| [[Training and Management]] || [[D3D Universal v21.06 Training and Management]] || 0

|-
! scope=row | 7
| [[Facility Design]] || [[D3D Universal v21.06 Facility Design]] || 0

|-
! scope=row | 8
| [[Supply Chain Development]] || [[D3D Universal v21.06 Supply Chain Development]] || 0

|-
! scope=row | 9
| [[Production]] || [[D3D Universal v21.06 Production]] || 0

|-
! scope=row | 10
| [[Quality Control]] || [[D3D Universal v21.06 Quality Control]] || 0

|-
! scope=row |
| '''MARKETING || ||

|-
! scope=row | 11
| [[Product Assets]] || [[D3D Universal v21.06 Product Assets]] || 0

|-
! scope=row | 12
| [[Marketing Strategy]] || [[D3D Universal v21.06 Marketing Strategy]] || 0
|-
! scope=row | 13
| [[Marketing Plan]] || [[D3D Universal v21.06 Marketing Plan]] || 0

|-
! scope=row | 14
| [[Product Webpage]] || [[D3D Universal v21.06 Product Webpage]] || 0

|-
! scope=row |
| '''SALES AND SUPPORT || ||

|-
! scope=row | 15
| [[Sales Strategy|Sales and Distribution Strategy]] || [[D3D Universal v21.06 Sales Strategy]] || 0

|-
! scope=row | 16
| [[Customer Support]] || [[D3D Universal v21.06 Customer Support]] || 0

|-
! scope=row | 17
| [[Shipping]] || [[D3D Universal v21.06 Shipping]] || 0

|-
! scope=row | 18
| [[Open Source Everything Store]] || [[D3D Universal v21.06 Open Source Everything Store]] || 0

|-
! scope=row |
| '''IMPROVEMENT''' || ||

|-
! scope=row | 19
| [[Marketing and Sales Data]] || [[D3D Universal v21.06 Marketing and Sales Data]] || 0

|-
! scope=row | 20
| [[Customer Feedback]] || [[D3D Universal v21.06 Customer Feedback]] || 0

|-
! scope=row | 21
| [[Continuing Improvement]] || [[D3D Universal v21.06 Continuing Improvement]] || 0

|-
! scope=row | 22
| [[Future Work]] || [[D3D Universal v21.06 Enterprise Future Work]] || 0

|}

File:HalogenHeatedBed.png

2022-02-17T14:43:00Z

Calligarov:

File:D3DUniversalv2106.png

2022-02-17T14:42:39Z

Calligarov:

D3D Universal v21.06 Unique Value Proposition

2022-02-17T14:39:02Z

Calligarov: Created page with "{{Info|Source|The values below are taken from D3D Universal Product Release page}} #'''Universal Gearless Extruder'''. Our unique design works well with both 1.75 and 3 m..."

{{Info|Source|The values below are taken from [[D3D Universal Product Release]] page}}

#'''Universal Gearless Extruder'''. Our unique design works well with both 1.75 and 3 mm filament, and its ClogFree exposed filament path allows for clogs to be cleared in seconds. No other 3D printer that we know of uses 3 mm filament without using a geardown, and we also know of no other extruder that accepts both 1.75 mm and 3 mm filament without any modification.
#'''Interchangeable Tool Heads'''. You can attach other toolheads simply by removing one bolt. D3D Universal ships with a spring-loaded pen plotter attachment with automatic bed leveling probe so you can print designs on flat substrates such as paper, plywood, metal, cardboard, plastic, or t-shirts. You can attach any pen or marker. We plan on releasing a vinyl cutter, CNC mill/drill attachment, and laser cutter head in February, 2020.
#'''Self-replicating''' - print more parts and build more D3D Universal printers. The limit here is that you still have to use metal parts that you buy from the store - but you can make 1/3 of the unique parts with the printer itself.
#'''[[Distributive Enterprise]]'''. Our goal is to shift the world from consumerism to a maker society. And we have a clear way for you to do this: we will buy printed parts for the 3D printer from you, so you effectively become our supplier! This is an education in itself - as you will need to learn specific quality control methods so that you can guarantee to us that your parts will work. Find out more about this unique opportunity at [[D3D Universal Part Production]]
#'''OSE Lifetime Design Guarantee''' - We pay attention to simplicity, desing-for-repair, design-for-disassembly, and robustness. We use a 100% open source design with full documentation in FreeCAD. We use common, off-the-shelf parts in our design You can improve D3D Universal with time by modifications or tool head additions - no specially-fabricated parts or exotic components are necessary. This means that YOU can decide how long you would like to continue using the machine, where ready replacement parts and our design-for-repair make this easy by using parts that you print, parts from a local hardware store, or from Amazon. Even if we ever go out of business, you will be able to use, maintain, and upgrade your machine.
#'''[[Universal Axis]]''' belt-driven design. CNC motion system for modification and scalability. Can be scaled up 100x in size and 2000x in torque-handling ability by upsizing from 8 mm prcision motion rods up to 3 inch shaft.
#Uses the [[Universal Controller]], which can be scaled up to power much larger machines with the ready addition of external stepper motor drivers.
#'''Product Ecology''' - The D3D Universal is part of a larger product ecology of machines with interchangeable parts. It can make parts for other machines.
#'''Bootstrapping to the Open Source Microfactory''' - As part of the OSE product ecology - we allow for easy bootstrapping. D3D Universal can be used to make all the 3D printed parts for our dedicated production printer, the D3D Pro. It can also be used to make all the parts for our CNC Torch Table.

{{Info|Source|The values below are new and introduced for the first time during the development of [[D3D Universal v21.06]]}}
#'''[[Halogen Heat Bed]]''' - The heated bed uses common low cost R7S halogen bulbs to heat the print surface. The halogen bulbs, using just 1/4 of their rated power, heat the surface in short time while preserving the lifetime of the bulbs themself.

D3D Universal v21.06 Product Assets

2022-02-17T14:04:27Z

Calligarov: Created page with "{{subst:Product Assets}}"

{{under construction}}

=Product Brochure=
To Do

=Photos=
To Do

=Infographics=
To Do

=Icons=
To Do

=Modules Videos=
To Do

=Exploded part diagram infographics=
To Do

=Functional infographics=
To Do

=Animations=
To Do

=Instructional Videos=
To Do

=Promotional Videos=
To Do

=Marketing copy=
To Do

[[Category:Business/Enterprise]] [[Category:Marketing]]

Template:Product Assets

2022-02-17T14:04:15Z

Calligarov:

<noinclude>

This template can be used to speed up the creation of a [[Product Assets]] page for a product by inserting the list of assets needed for the product.
To use this template, add the following command when editing the product's Product Assets page:

<pre>
{{subst:Product Assets}}
</pre>

</noinclude>

{{under construction}}

=Product Brochure=
To Do

=Photos=
To Do

=Infographics=
To Do

=Icons=
To Do

=Modules Videos=
To Do

=Exploded part diagram infographics=
To Do

=Functional infographics=
To Do

=Animations=
To Do

=Instructional Videos=
To Do

=Promotional Videos=
To Do

=Marketing copy=
To Do

[[Category:Business/Enterprise]] [[Category:Marketing]]

Template:Product Assets

2022-02-17T14:03:24Z

Calligarov: Created page with "<noinclude> This template can be used to speed up the creation of a Product Assets page for a product by inserting the list of assets needed for the product. To use this..."

<noinclude>

This template can be used to speed up the creation of a [[Product Assets]] page for a product by inserting the list of assets needed for the product.
To use this template, add the following command when editing the product's Product Assets page:

<pre>
{{subst:ProductAssets}}
</pre>

</noinclude>

{{under construction}}

=Product Brochure=
To Do

=Photos=
To Do

=Infographics=
To Do

=Icons=
To Do

=Modules Videos=
To Do

=Exploded part diagram infographics=
To Do

=Functional infographics=
To Do

=Animations=
To Do

=Instructional Videos=
To Do

=Promotional Videos=
To Do

=Marketing copy=
To Do

[[Category:Business/Enterprise]] [[Category:Marketing]]

User:Calligarov/Vincenzo Calligaro Log

2022-02-10T18:00:04Z

Calligarov: /* Thu Feb 10, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Thu Feb 10, 2022=
[[D3D Universal v21.06 Build Instructions#LAI Version| D3D Universal v21.06 Build Instructions LAI Version]]

=Sat Feb 05, 2022=
[[D3D Universal v21.06 Fabrication Drawings]]. [[Presentation Template]]

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

D3D Universal v21.06 Build Instructions

2022-02-10T17:59:08Z

Calligarov:

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSo_0IQUKsVjnwuRcR9Z9uuGmWfuDS6S-KDeZPw8cptlBsJT5VG8lzxdj3UtN1NHcrlTG7uljJqbwLe/embed?start=false&loop=false&delayms=3000" frameborder="0" width="408" height="557" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/16VJuaP53DX30lbOE8KeHJ4gxD-rYH5vFQ0gI05EwOfU/edit#slide=id.g4303b70038_0_0 edit]

=Halogen Heat Bed=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSVhElqp8ttUdYDyBgiGCY9rmyBiZgE0uJNNin4f87W1SSQBNH-m8GG6Twh1VlkPbHzHKoPxknwIbiL/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/15eDMLQW5uglxXxxNP5u6n7uQUTysNERG3_8INUcCKLc/edit#slide=id.gec155b6c58_0_0 edit]

=[[LAI]] Version=

{{under construction}}

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRZZSu2uh4AqeVtX4slDQOy31d3pmW4Gz-A3Mf1p4rVk4z78-wys9xhZMMFVaUufrLiZ0l9PsOQTAhX/embed?start=false&loop=false&delayms=3000" frameborder="0" width="384" height="557" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1LYmMC1fSamfYq1CjgzH7ktCKWKhOeRnNyjNI0Oq0FGI/edit?usp=sharing edit]

User:Calligarov/Vincenzo Calligaro Log

2022-02-05T17:50:35Z

Calligarov: /* Sat Feb 05, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Sat Feb 05, 2022=
[[D3D Universal v21.06 Fabrication Drawings]]. [[Presentation Template]]

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

Presentation Template

2022-02-05T17:49:15Z

Calligarov:

The presentation templates are used as starting points for new [[Working Docs]]

{{Info|Usage|When starting a new [[Working Doc]], '''Duplicate''' one of the following templates according to your needs. '''Edit''' them only if there's need to add/remove/change something}}

=Landscape oriented template=

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRWAqY7OhFYIG6yqVsMGI8MOh3TifWe-FrmyO_dYrSNm40hLIwhz1V3aghrs6mhi38BqoFAfG6q5pQb/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></iframe></html>

[https://docs.google.com/presentation/d/1BYq9bigqiLx9Pa5_xpiu16AngFvruF4NWpbELjgyl94/edit?usp=sharing edit]

=Portrait oriented template=

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vR8xLYFW53HGMUkS-BudRhjAZcu6n33MmxZ3uaUlBqJRpJ4wN78I8nFcUCieOV1SM4r9LaEo2oZZNNK/embed?start=false&loop=false&delayms=3000" frameborder="0" width="408" height="577" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1qOZLDJN4eSH8sIOTf7aV2QkrY-kAtV_w8btRpCiMbPU/edit?usp=sharing edit]

D3D Universal v21.06 Fabrication Drawings

2022-02-05T16:29:53Z

Calligarov:

{{under construction}}

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSMzAJclOtjNjppRBC1UoDuuTw9s9B2baRoUtuGoVMYQGp_2cl-3jVI_plEN4J69hbbXgSL2-Ac9-dg/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1mMztVzlRJ6hnETz9TmeH-IwBAUbOoiAtbxGHnpWtbYM/edit?usp=sharing edit]

User:Calligarov/Vincenzo Calligaro Log

2022-02-05T16:21:48Z

Calligarov: /* Sat Feb 05, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Sat Feb 05, 2022=
[[D3D Universal v21.06 Fabrication Drawings]]

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

D3D Universal v21.06 Fabrication Drawings

2022-02-05T16:20:05Z

Calligarov: Created page with "<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSMzAJclOtjNjppRBC1UoDuuTw9s9B2baRoUtuGoVMYQGp_2cl-3jVI_plEN4J69hbbXgSL2-Ac9-dg/embed?start=false&loop=false..."

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSMzAJclOtjNjppRBC1UoDuuTw9s9B2baRoUtuGoVMYQGp_2cl-3jVI_plEN4J69hbbXgSL2-Ac9-dg/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1mMztVzlRJ6hnETz9TmeH-IwBAUbOoiAtbxGHnpWtbYM/edit?usp=sharing edit]

User:Calligarov/Vincenzo Calligaro Log

2022-02-03T13:48:01Z

Calligarov: /* Thu Feb 03, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Thu Feb 03, 2022=
[[Replication]]

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

Replication

2022-02-03T13:45:43Z

Calligarov: /* 2022 */

{{OrigLang}}
{{Tip|Replication Discussions|
Feel free to discuss your ideas and experiences regarding replication on the [http://forum.opensourceecology.org/categories/gvcs-replication GVCS Replication category] of our forum.
}}
{{TOC left}}
= Overview =
<p style="text-align:justify;">Using the [[Civilization_Starter_Kit_DVD_v0.01|Civilization Starter Kit]], people are beginning to independently build their own [[Global_Village_Construction_Set|Global Village Construction Set]] machinery throughout the world. Many of them have come to [[Factor_e_Farm|Factor e Farm]] for [[Dedicated_Project_Visits|Dedicated Project Visits]], and others have taught themselves based on our training materials. We conduct [[Evaluations|program evaluations]].

=Replicator's Survey=

If you have built any of the GVCS machines, we'd like to hear about your experience for learning purposes. Please email us at info at opensourceecology to share your experience, or add your build to this page.

== Daniel & Hayden: Pasadena, California, USA ==

[[Image:DH_Tractors_-_02.jpg|left|400px]]
<h3>'''[http://dandhtractors.org/ D&H Tractors]'''</h3>
<p style="text-align:justify;">'''We are D & H, Daniel and Hayden, 12th grade students at the Polytechnic School in Pasadena, CA.'''</p>
<p style="text-align:justify;">We, along with our engineering class and several students from nearby Blair High School, intend to build a Lifetrac from the plans of Open Source Ecology. We will donate the tractor to [http://www.southcentralfarmers.com/ The South Central Farmers Cooperative], for use on their 120 acre farm in Shafter, CA.</p>

<p style="text-align:justify;">Our rationale for taking on this project is three pronged. By being among the first- and the first high school aged students- to replicate the Lifetrac, we are doing a service to the Open Ecology Project, and, consequently, may be helping change the future of agriculture everywhere. Our project will, likewise, benefit the South Central Farmers, who are eager to experiment with open source agricultural technology. Finally, bringing a project like this to the Polytechnic School (and, in a smaller degree to Blair High School) will provide aspiring engineers with a chance to use their skills in the field before leaving for college.</p>
* Slides: http://imgur.com/a/eZq7t/embed
* High School Presentation: http://vimeo.com/36147461
{{Clear}}

== Manuel Aguilar: Guatemala ==

[[Image:Manuel Aguilar - 02.jpg|left|400px]]

<h3>'''[http://quetsol.com/ Quetsol]'''</h3>

<p style="text-align:justify;">'''Manuel was co-founder of Quetsol. Quetsol offers appropriate technology solutions that sustainably provide for the energy demands of a wide variety of users at a lower social and economic cost.'''</p>

<p style="text-align:justify;">Our project, currently in late planning stages, is building a sustainable village for about 30 families recently displaced by extreme weather in Guatemala. The village model will approach sustainability in an integral way, from housing design and construction to agriculture and resource management. Residences, for example, will incorporate appropriate materials (CEB mostly), passive solar design, and come standard with rain-catchment systems with prefiltration, mini greenhouses, efficient wood/methane stoves, water filtration, PV for light/comm, compost toilets, water recycling. Agri and aquaculture will be efficiently designed as well as per local conditions (location TBD soon). The aim will be to demonstrate a working prototype of a self-sustainable community built for the BOP, which can, when designed and built appropriately, economically replace the current minimum denominator settlements which cause so much human and environmental hazard. Ultimately we intend to build something replicable and scalable, which is where OSE comes in.</p>

<p style="text-align:justify;">OSE will integrate into our work in a variety of ways. Initially, we aim to train a skilled replicator so that some of the first GVCS machines can be built on site and facilitate village construction and development. We also plan to build and equip a workshop in which to build the initial machines and which will also eventually serve as a high-value business opportunity to some trained villager entrepreneurs. Beyond the machines built for village use, which will generate value at reduced cost - income will be generated initially from fabricating machines for local distribution. Eventually, they workshop will also expand to include training of locals, so that other such businesses may sprout in other communities. This is in keeping with the OSE ethos, and at the core of many of our intentions with our project. The village aims to demonstrate that post-scarcity abundance can be achieved, even with the lowest means found amongst the BoP, with appropriate use of technology. OSE provides a fantastic set of tools and methodologies that potentiate development precisely through intelligent open-source design and tech.</p>

<p style="text-align:justify;">In terms of time frame, in the next month, we will have purchased land, identified a replicator, finished first project proposal and begin land work. April I will be travelling abroad for 3 weeks, so construction of the first living Unit will take place mid-May. During summer, June-Aug, we will build the workshop and at some point fabricate the CEB press after having the replicator receive proper training. After this is accomplised, we will build the residential units and have the families begin to move in, as they will also be helping build their own houses.</p>
<br style="clear: both" />

See [[Guatemala Log]] for more details.

== Andrew Spina: Baltimore, Maryland, USA ==
[[Image:Andrew-Spina---02.jpg|left|400px]]
<h3>'''[http://aispina.blogspot.com/ Machining Independence]'''</h3>
<p style="text-align:justify;">'''I'm building my own tractor''' because I want to understand it and be able to maintain it. It's also a project that will teach me many valuable skills. I've already learned a ton about machining and CAD.</p>

<p style="text-align:justify;">Finally, I'm interested in joining the material economy at some time in my life. So far I've earned my living by working in the knowledge economy. I think really hard and get paid to do it. I'm employed as a programmer. It's a job I love, but constrains my life quite a lot-- I work 40hr a week and have to commute to my place of work. One day, I'd like to have a bit more control-- perhaps program as a hobby.</p>

<p style="text-align:justify;">What do I mean by 'material economy' ([http://www.newgreeneconomy.com/sustainable-living/item/12-transforming-the-materials-economy a green wing article])? I mean that I take ingredients and make a product. The product is a tangible thing that solves a tangible problem like hunger, need for shelter, etc. This is important because the tangible problems are the ones that force the average person to take a 9 to 5. If I can provide fixes for these root human needs, I'll have high security (someone somewhere is hungry) and be encouraging smaller scale self sufficiency. The OSE folk argue (see Village Scale [http://opensourceecology.org/wiki/OSE_Spec here]) that a material economy of about 200 people is enough for comfortable modern living locally. That sounds like somewhere I'd want to live.</p>

<p style="text-align:justify;">So what will I produce in the material economy? I mean really, what will my tractor produce? I don't have a firm plan, but my current thoughts are to produce pelletized biomass. With a few tools (Tractor, Hay Cutter, Hammer Mill, Pelletizer) and some land, I may be able to produce a renewable, carbon neutral (or even negative!) local fuel. I'm not yet clear on the economics-- how much land make how many pellets? How much labor for each acre of land? How much do pellets cost? Where would I sell them? But, I'm going to have a tractor regardless so if the economics don't work, I'll find a different plan.</p>
<br style="clear: both" />
== James Slade: Austin, Texas, USA ==

[[Image:James_Slade_-_02.jpg|left|400px]]
<h3>'''[[Replication-CreationFlame|Creation Flame]]'''</h3>
<p style="text-align:justify;">"'''October, 2011 marks the first ever replication of a complete [[GVCS]] machine by an independent third party. This is a day of historical significance for the Global Village Construction Set. Congratulations to James Slade of Texas.'''"</p>
''- Marcin Jakubowski, Nov. 14, 2011''

<p style="text-align:justify;">James Slade is one of the co-founder's of [http://www.CreationFlame.org Creation Flame] in Cedar Creek, Texas. In partnership with Jason Smith, Creation Flame is the first to successfully replicate a CEB press and is now getting into the business of using and selling CEB blocks. In unison with Thad from Broken Sidewalk Farm, they are starting production of a LifeTrac, self replicating CNC Plasma table, and another Powercube. Also starting to build a few [[roller table|Roller Tables]] to help with the CEB's and steel work.</p>
<br>

See corresponding [http://blog.opensourceecology.org/2011/11/historic-moment/ Blog Post]. See [[Patrick Gibbs Interview of James Slade]] regarding this replication.

<br />
CEB brick pressing results from Creation Flame: [[CEB_Blocks|CEB Blocks]]
<br style="clear: both" />
<br style="clear: both" />

== Tom Griffing: Dallas, Texas, USA ==

[[Image:Tom_Griffing_-_02.jpg|left|400px]]
'''<h3>[[Replication/PondusLLC|Pondus, LLC]]</h3>'''
<p style="text-align:justify;">'''Tom Griffing operates Pondus LLC in Dallas, Texas.'''</p>

<p style="text-align:justify;">After spending nearly a month in Missouri in August, Tom has continued his efforts in documentation, design enhancements and in replicating his first Power Cube. He is now targeting a LifeTrac after making improvements on our Power Cube Prototype 4 design.</p>

'''Video:''' [http://www.youtube.com/watch?v=HhOphEJiCVk&feature=plcp&context=C359e526UDOEgsToPDskLmdLjD8raeWHMmtqV-8xWe Power Cube Prototype 5] - Tom's updated design of the Power Cube.

'''Photo:''' [[First_Power_Cube_Sold_by_Tom_Griffing|Enhanced Power Cube]] - the first Power Cube sold by Tom.
<br />

<br />

<br style="clear: both" />

== Luke Iseman: Austin, Texas, USA ==

[[Image:Luke-Iseman---02.jpg|left|400px]]
'''<h3>[http://www.re-char.com re:char]</h3>'''
'''<p style="text-align:justify;">Luke worked on [[CNC_Torch_Table#Suggested_steps_from_Luke_Iseman|making improvements]] to the CNC Torch Table and made a [[Luke_Iseman_Dedicated_Project_Visit_Application|dedicated project visit]] to Factor e Farm in December, 2011.</p>'''
<p style="text-align:justify;">Luke is chief technology officer for [http://www.re-char.com re:char]. He graduated, cum laude, from [http://www.wharton.upenn.edu/ The Wharton School] at the University of Pennsylvania, concentrating in Entrepreneurship and Operations. Luke is passionate about open source hardware, and his projects have been covered by [http://makezine.com/ Make Magazine], [http://www.re-char.com/who-we-are/rechar-team/boingboing.net/ Boingboing], [http://www.re-char.com/who-we-are/rechar-team/www.wired.com/ Wired], and [http://www.re-char.com/who-we-are/rechar-team/www.austinchronicle.com The Austin Chronicle]. Before joining the re:char team, Luke worked at a variety of software technology companies, built and managed a fleet of 25 pedicabs, invented an automated gardening computer, and wrote a book about traveling around the world. Luke is excited about using the power of the physical computing revolution to build a more sustainable world.</p>

<br style="clear: both" />

== Dorkmo: Tulsa, Oklahoma, USA ==

[[Image:Dorkmo---02.jpg|left|400px]]
'''<h3>[[User:Dorkmo|Dorkmo]]</h3>'''
'''<p style="text-align:justify;">Dorkmo is a user from Oklahoma with a background in tinkering, and he enjoys spreadsheets.</p>'''

<p style="text-align:justify;">He has independently replicated the [[CEB_Press/Manufacturing_Instructions/Detroit_Fab_Lab_Solenoid_Driver_v2|Detroit Board]] and the [[CEB_Press/Manufacturing_Instructions/Controller_Box|CEB Controller Box]].
<br />
<br />
<br />
<br />
<br />
<br />

<br style="clear: both;" />

== Dandelion Village: Bloomington, Indiana, USA ==

Zach Dwiel is a member of [http://dandelionvillage.org/ Dandelion Village], an ecovillage in the city limits of Bloomington, Indiana. They are in the process of building their first home using a CEB Press and Power Cube. Tom built our Power Cube. For the CEB Press, James Slade fabricated the steel parts, Zach designed and built the controller board and electronics, purchased the hydraulics and Dandelion Village assembled the machine.

Zach plans to build a two story house this year (2012) with the bricks from the CEB Press. More buildings are planned for next year, some of which may include bricks from the CEB Press, depending on how production goes on the first home. You can find updates on my blog: [http://dwiel.net/blog/category/house/ blog] and my house design here on this wiki: [[Dwiel House]]

== Tony Mensah, Mark Amo-Boateng, William Neal: Nanjing, China ==
[[Image:Mark_MetricCEB.jpg|left|400px]]
<h3>'''[[China Replication]]'''</h3>

In May, 2012, this group, originally from Ghana and Canada, set out in Nanjing to redesign the CEB press to metric specifications and build it with the help of some engineers at a factory in Ma'anshan, Anhui, China.

According to a report received on September 27th, there were some technical issues surrounding the later stages of assembly of the CEB press, particularly centred around the secondary cylinder and the soil shaker.

'''In June, 2013, the group was finally able to test the brick press - successfully [https://www.youtube.com/watch?v=QNWvE1HluZ8 (youtube link)]'''.


{{Clear}}

=Charles Liptaak=
<div class="toccolours mw-collapsible mw-collapsed" style="width:800px;">
<big>'''Charles Liptaak's Replication'''</big>
<div class="mw-collapsible-content">{{:Charles Liptaak Replication}}</div>
</div>

=Italy=
*CEB 1 - [http://www.facebook.com/media/set/?set=a.407927422606836.96582.260586650674248&type=1]
*CEB 2 - [https://www.facebook.com/OpenSourceEcologyItalia/photos/a.360056254060620.83900.260586650674248/367184470014465/?type=3&theater]

=Up to 2012=
Here is a clickable document (click edit below the drawing to access links) - all machines built up to 2012:

<html><img src="https://docs.google.com/drawings/d/13KT0VcHtk93h_yF_y6SdvTQgkN8_FOaaDmBhyDGUfhs/pub?w=960&h=720"></html>

[https://docs.google.com/drawings/d/13KT0VcHtk93h_yF_y6SdvTQgkN8_FOaaDmBhyDGUfhs/edit edit]

==Itemized==
*[[Texas_CEB_Work]]

=2022=
[[D3D Universal v21.06]] replica in Cadore, Italy - work in progress

[[File:D3DUniversalv21.06Cadore.png]]

=2019=
{{Hint|Note: starting newest at the top beginning in 2019}}
*[[D3D @ Fontys Sittard]]
*Ciruit plotter by [[Ferdi Log]] - see https://feadi.github.io/OSE/
*[[Universal Axis]] 3D printer - 3 in China, Canada, and Guyana by [[William Neal]]

=2018=
*[[Universal Axis]] 3D printer - [[SZOIL]] in Shenzhen, China.
*[[CEB Replication in France]]
*CEB Press in South Africa - Tsolo Moahloli <tsolo@bothopele.com>
[[File:Tsolo1.jpg|200px]][[File:Tsolo2.jpg|200px]]

=2017=
*See [[D3D Genealogy]] - there is a number of 3D printer replications in different countries.

=2016=
*Brick press in france-

<html><iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155545228151562&width=500" width="500" height="657" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe></html>

=2015=
*[[Tractor Replication in Peru]]
*[[Tractor Replication in Canada]]
[[File:bamfordtractor.jpg|500px]]
*[[Rob Beddingfield CEB Press]]

=2014=
*CEB Press - for Scott Mader
*CEB Press - for Midwest Renewable Energy Fair
*CEB Press - for Factor e Farm
*PowerCube - Structural 1&2
*MicroPowerCube 2&3
*Lulzbot TAZ- 12 3D printers built in a workshop
*MicroCar - [[Velocar]] partial prototype
*[[MicroHouse 2]]
*[[MicroHouse 3]]
*[[MicroHouse 4]]
*Danny Epperson - PowerCube v6 in Austin, TX - [http://www.d33z.com/p/powercube.html]
*[[CEB Build in Chile]]
*[[CEB Build in India]]
*[[CEB Build in Texas 2014]]
*[[CEB Build - Rob Beddingfield]] - USA
*[[MarsTrac]]
*[[Nicaragua Replication]] - 2 brick presses and power cubes?

Note: counted 110 total machines as of end of 2014. 12 are 3D printers. 2 are the CEB presses and 4 power cubes in Nicaragua, thought the Nicaragua replication awaits confirmation. 27 not done by OSE headquarters, of these, 12 are brick presses. 8 countries of replication: USA, Chile, Nicaragua, Guatemala, China, India, Italy, Turkey.

=2013=
OSE builds:
*Laser Cutter - [http://opensourceecology.dozuki.com/c/Laser_Cutter_-_Modules]
*[[LifeTrac 5]]
*[[LifeTrac 6]]
*[[Backhoe Prototype 3]]
*[[Ironworker Prototype 3]]
*[[MicroHouse 1]]
*[[MicroPowerCube 1]]
*Lulzbot TAZ build - with CNC Mill Spindle - [[Aidan Williamson]]

Counted 73 machines as of end of 2013.

=Replication FAQ =
*'''Q: Ironworker''' - Is any documentation for prototype 3 available or is it just not ready to be released for replication at this point? I found a sketchup file but it doesn't appear to have enough information and most of the modules on the dozuki site do not have any content.
**'''A: The ironworker has been built and tested, but not documented well. We took it to desructive testing, so it's not a machine that we are currently using. See https://www.youtube.com/user/marcinose/search?view_as=subscriber&query=ironworker'''. However we are still using the earlier prototype, see [[Ironworker Genealogy]].
*'''Q: CNC Torch Table''' -There is a youtube video from the microfactory startup camp in which Marcin explained the history of the work on this and the ambitions for version 19.10 and was curious whether you had a rough timeframe in mind when you thought a prototype and documentation might be available whether it be a year, three years, five years, or so.
**'''A: [[CNC_Torch_Table_v19.10]] has some documentation, and we'll be publishing test and usage data as a result of the [[Summer X 2020]]'''
*'''Q: CNC Torch Table''' - From skimming though the documentation available thus far it looks like the table may be able to be reasonably replicated but it didn't look like it would be sufficient to piece together the electronics without a strong background in this. If the prototype for version 19.10 goes well following the Summer X 2020 workshops, do you anticipate full documentation being available shortly afterwards?
**'''A: Definitely
*'''Q: Power Cube''' - Which version would you recommend to run the CEB press? It looks like the power cube prototypes are generally 28 horsepower so I assumed that this was sufficient to run the CEB press cylinders at a decent pace and it appeared that version 7 had pretty clear documentation.
**'''A: [[Power Cube VII]] works, but it's more difficult to build, so we recommend the newest one, [[Power Cube v17.10]] for ease of build. We are still continuing development, and shifting to the [[Changfa Diesel]] in the next iteration for longevity.'''
*'''Q: Power Cube''' - Do you have an idea for when documentation for the Changfa Diesel version would be available? It looks like version 17.10 has 64 hp and 16 hp models and I was wondering if the 16 hp model would be sufficient to operate the new soil mixer/CEB press machine or is that a question that you wouldn't be able to answer until it is prototyped?
**'''A: 16 will work fine, you can do 17.10 and it will work. We will document the Changfa diesel in this summer as well.
*'''Q: CEB Press:''' Is the intention for the soil mixer to create a stockpile of stabilized material that would then be loaded into the CEB press with a loader or for the material to run from the chute of the soil mixer directly into the press? If the material is intended to run directly into the CEB press would the current version with their large hoppers be able to run in tandem since the chute appears to be lower than the hoppers of the CEB presses?
**'''A: The large hopper will be put on the soil mixer, and a small hopper would be on the actual brick press - see [[File:Mixerwithpress.png|50px]] and [[Soil Mixer 2019]] for more details.

= Archive =
*Old survey - Old 2012 Survey - [https://docs.google.com/a/opensourceecology.org/spreadsheets/d/1g7jaG5ZnF6m-n4NoVCTUXjqmzjNc9_KuoVI49ArYXZ4/edit#gid=0]

*For old ideas on Replication, check the [[Replication/Archive|Archive]].

=Links=
*[[D3D Replication]]
[[Category: Education]]
[[Category: Replication]]
*[[Distributive Enterprise]]
*[[Stages of Product Release]]

File:D3DUniversalv21.06Cadore.png

2022-02-03T13:30:26Z

Calligarov:

User:Calligarov/Vincenzo Calligaro Log

2022-02-01T13:40:44Z

Calligarov: /* Tue Feb 01, 2022 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/VincenzoCalligaro?start=3/1/2021"></iframe></html>

=Tue Feb 01, 2022=
[[D3D Universal v21.06 3D CAD]]

=Fri Dec 17, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/xISULx9mKTE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#The answers to the four questions of the OSE FreeCAD Badge test are the same of the previous video

=Tue Aug 24, 2021=
==OSE FreeCAD Badge Feature on Feature excercise==
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/nAIIMxh56VI" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
#Using FreeCAD for hobby since 2016, therefore watched many videos in the last years
#[[FreeCAD_101#Lesson_3a:_OSE_Basic_Workflow_Tutorial]] and [[FreeCAD_101#Lesson_3b:_Basic_OSE_Workflow:_Feature_on_a_Feature]] are more than sufficient. Maybe it can help making them shorter?
#1 minute? Just downloaded and launched [[FreeCAD_16_Appimage]]
#As for previous points, I've been using FreeCAD since a while so I have quite some expirence

=Thu Jul 8, 2021=
[[High Temperature Heated Enclosure]]

=Thu Jul 1, 2021=
[[User:Calligarov]], [[Vincenzo Calligaro Log]], [[Vincenzo Log]]

=Sun Jun 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Thu Jun 17, 2021=
[[LifeTrac v20.12]]

=Sun May 9, 2021=
[[LifeTrac v20.12]]

=Sat Apr 17, 2021=
[[Universal Track Unit Conceptual Design]], [[User:Calligarov]]

=Fri Apr 16, 2021=
[[Universal Track Unit Conceptual Design]]

=Mon Apr 12, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sun Apr 11, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Conceptual Design]]

=Sat Apr 10, 2021=
[[LifeTrac v20.12]]

=Thu Apr 8, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 30, 2021=
[[Making Keyways]]

=Sun Mar 28, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Sat Mar 27, 2021=
[[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

=Wed Mar 24, 2021=
[[Universal Track Unit Conceptual Design]]

=Tue Mar 23, 2021=
[[Universal Track Unit Conceptual Design]]

Notes:
*https://www.thingiverse.com/thing:7918
*Hydraulic motor - [https://www.google.com/search?q=EXT-M598WMB+extreme+hydraulic&sxsrf=ALeKk01cTws-7IFEINrxyyMUJTiqLo0Xbw%3A1616535072426&ei=IF5aYP63GcX0tAbVgr7gBQ&oq=EXT-M598WMB+extreme+hydraulic&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgcIABBHELADOgUIIRCrAjoHCCEQChCgAVCwyQFY6d0BYNnkAWgBcAJ4AYABpQOIAd0PkgEIMTQuMy40LTGYAQCgAQGqAQdnd3Mtd2l6yAEIwAEB&sclient=gws-wiz&ved=0ahUKEwj-x4i2rsfvAhVFOs0KHVWBD1wQ4dUDCA0&uact=5]
*A2+ - [https://wiki.freecadweb.org/A2plus_Workbench]
*Track from former machine - [https://photos.google.com/u/1/share/AF1QipNAnae7GASxfo4OSXr_ihwKQdDGEgqQU7YKCHjPoFYV5SC87HY29w1pkafWYINdEg/photo/AF1QipOCWGXH2CzBGTTcqdVr-G7mSJjNypanQnPrxc4J?key=Y0xrbnRFQUdPdGlDcGx1cnpGeDRjcWlObXA3SlRn]
*Graphic of Universal Track Unit - [https://wiki.opensourceecology.org/wiki/File:Senweesh.png]
*Nm to in lb converter - [https://www.convertunits.com/from/lb-in/to/N-m] - we have 1700 Nm.
*Sprocket - [https://www.surpluscenter.com/Power-Transmission/Shaft-Couplers/Keyed-Splined-Hex-1-Piece-Solid-Couplers/16302014-1-1-4-14T-Splined-Coupling-G-G-Mfg-16302014-1-1393.axd]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/0C7F0ZojeuA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

=Mon Mar 22, 2021=
[[Universal Track Unit Conceptual Design]]

=Sun Mar 21, 2021=
[[LifeTrac v20.12]]

=Wed Mar 17, 2021=
[[LifeTrac v20.12]], [[Universal Track Unit Module Breakdown]]

=Mon Mar 15, 2021=
[[LifeTrac v20.12]], [[Fasteners Workbench in FreeCAD]], [[Universal Track Unit Module Breakdown]]

=Tue Mar 9, 2021=
[[LifeTrac v20.12]]

=Sat Mar 6, 2021=
[[LifeTrac v20.12]]

=Wed Mar 3, 2021=
[[LifeTrac v20.12]], [[100 Pitch Chain]]

=Tue Mar 2, 2021=
[[LifeTrac v20.12]]

=Mon, Mar 1 2021=
Create this log, [[Universal Track Unit Conceptual Design]], [[LifeTrac v20.12]]

D3D Universal v21.06 3D CAD

2022-02-01T13:29:56Z

Calligarov: Updated page adding missing parts

{{Hint| Change from [[D3D Universal 2]] is integrating the Z motor piece into base and splitting base into 3 parts for printability on another D3D Universal. Files include a one-piece base that still needs a 12" bed for printing, but this is broken into 2 pieces in the next files.}}

*Complete as one piece - [[File:baseonepiece.fcstd]]
*Main body of base - [[File:mainbodyofbase.fcstd]]
*Upper part - [[File:upperpartofbase.fcstd]] - controller side
*Lower part - [[File:lowerpartofbase.fcstd]] - with non-integrated Z axis
*No arms - just bases
*Modified one piece - [[File:basemodifiedonepiece.fcstd]]

==Part Library - D3D Universal 3==

'''Visual History:'''

[[File:D3D_Universal_3_v.21.06.png|100px]][[File:uni3mainassy2.png|100px]][[File:uni3mainassy.png|100px]][[File:uni2basepart3.png|100px]][[File:uni2basepart2.png|100px]][[File:uni2idlerbasetrimmed.png|100px]][[File:uni2idlerbase.png|100px]][[File:uni2motorbase.png|100px]]

'''Gallery:'''

<gallery perrow=6>

endclosure.png|'''End closure''' - FreeCAD - [[File:endclosure.fcstd]] - STL - [[File:endclosure.stl]]

uni3mainassy2.png|'''Main base assembly''' - FreeCAD - [[File:uni3mainassy.fcstd]] - STL - [[File:uni3mainassy.stl]]

uni3mainassy.png|'''Part 1 assembly with motorpiece.''' - FreeCAD - [[File:basewithmotorside.fcstd]] - STL - [[File:uni2basepart1.stl]]

uni2basepart3.png|'''Universal 3 Controller Part of Base''' - FreeCAD - [[File:Upperpartofbase.fcstd]] - STL - [[File:uni2basepart2.stl]]

uni2idlerbase.png|'''Universal 3 Idler Base''' - FreeCAD - [[File:uni2idlerbase.fcstd]] - STL - [[File:uni2idlerbase.stl]]

uni2motorbase.png|'''Universal 3 Motor Base''' - FreeCAD - [[File:uni2motorbase.fcstd]] - STL - [[File:uni2motorbase.stl]]

</gallery>

<gallery perrow=6>

File:D3D_Universal_3_v.21.06.png| '''D3D Universal 3 Assembly.''' [[File:D3D Universal 3 v.21.06 Link.FCStd]]. Full file on Gitlab - [https://gitlab.com/calligarov/d3d-universal-3-v21.06/-/blob/main/D3D%20Universal%203%20v.21.06.FCStd]

File:universal2assy8.png|'''D3D Universal v2 Assembly.''' [[File:universal2assy.fcstd]]. Full file on Gitlab - [https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/uni_remake.fcstd]

File:New spoolholder.png| '''D3D Universal Rework Spool Holder '''- FreeCAD - [[File:D3D Universal Spool Holder.fcstd]]. STL - [[File:D3D Universal Spool Holder.stl]]

File:bedclamp2.png|Bed clamp. [[File:bedclamp.fcstd]]. STL - [[File:bedclamp.stl]]

File:beltpinch6.png|'''Beltpinch.''' [[File:beltpinch.fcstd]]. STL: [[File:beltpinch.stl]]

File:newbeltpeg4.png|'''New belt peg.''' [[File:newbeltpeg.fcstd]]. STL: [[File:newbeltpeg.stl]]

File:uni2bedmountcarriage4.png|'''D3D Universal 2 bed mount carriage.''' [[File:uni2bedmountcarriage.fcstd]]. STL: [[File:uni2bedemountcarriage.stl]]. Update with set screw correction - Gitlab - [https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/update_bed_carriage.fcstd]

File:ztox_Complete.png|'''D3D Universal Z to X Carriage.''' Overall: [[File:ztox.fcstd]] initial, and [https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/z_to_x.fcstd Gitlab final]. Carriage part - [[File:ztox_Carriage.fcstd]]. Motor part - [[File:ztox_Motor.fcstd]]. STL - [[File:ztox.stl]]

File:newclosure.png|'''Carriage closure.''' [[File:carraigeclosure.fcstd]]. STL - [[File:carriageclosure.stl]]

File:carriageholeswidened.png|Simplified Universal Axis carriage: [[File:simplified_carriage_side.fcstd]]. STL - [[File:Simplified_carriage_side.stl]]

File:idlerplugged.png|'''One piece idler.''' - FreeCAD -[[File:newidler.fcstd]]. STL - [[File:newidler.stl]]

File:bespacer.png|'''Bed spacer.''' File: [[File:bedspacer.fcstd]] [[File:bedspacer.stl]]

File:updatedmotor.png|'''Simplified Universal Axis Motor Side''' - FreeCAD -[[File:simplified_motor_side.fcstd]]. Full size at Gitlab - [https://gitlab.com/marcin_ose/universal-axis-2/-/blob/master/new_motor_piece.fcstd]. STL - [[File:simplified motor side.stl]]

File:LCDmountupdatechamf.png|'''LCD Mount.''' [[File:lcdmount.fcstd]]. STL - [[File:lcdmount.stl]].

File:autoparallelredone.png|'''Auto parallel piece.''' Can be used on Y for auto parallel, Z for equal bottoming. And for holding endstops. File: [[File:autoparallel.fcstd]] [[File:autoparallel.stl]]

File:remakeelectronics.png|'''D3D Universal electronics.''' [[File:unielectronics.fcstd]].

File:remakezaxis.png|'''D3D Universal Z axis.''' [[File:unizaxis.fcstd]].

File:remakeyaxis.png|'''D3D Unviersal Y axis.''' [[File:uniyaxis.fcstd]].

File:remakexaxis.png|'''D3D Universal X axis.''' [[File:unixaxis.fcstd]].

File:endstop.jpg|'''Endstop.''' - FreeCAD - [[File:D3D End Stop Switch.fcstd]].

File:ScrewM6x18.png| '''Screw M6x18''' [[File:ScrewM6x18.FCStd]].

File:SetScrewM6x10.png| '''Set Screw M6x10''' [[File:SetScrewM6x10.FCStd]].

File:R7SLampHolder.png| '''Lamp holder''' for R7S halogen lamps [[File:R7SLampHolder.FCStd]].

File:ScrewM3x25.png| '''Screw M3x25''' [[File:ScrewM3x25.FCStd]].

File:R7SLamp.png| '''R7S Halogen lamp''' [[File:R7SLamp.FCStd]].

File:ScrewM6x25.png| '''Screw M6x25''' [[File:ScrewM6x25.FCStd]].

File:NutM6.png| '''Nut M6''' [[File:NutM6.FCStd]].

File:ScrewM3x8.png| '''Screw M3x8''' [[File:ScrewM3x8.FCStd]].

File:ScrewM3x18.png| '''Screw M3x18''' [[File:ScrewM3x18.FCStd]].

File:ScrewM3x30.png| '''Screw M3x30''' [[File:ScrewM3x30.FCStd]].

File:SelfTappingScrewM3x13.png| '''Self Tapping Screw M2.9x13''' [[File:SelfTappingScrewM3x13.FCStd]].

File:ScrewM4x30.png| '''Screw M4x30''' [[File:ScrewM4x30.FCStd]].

File:D3DUniversal3WoodenBase.png| '''Wooden Base''' [[File:D3DUniversal3WoodenBase.fcstd]].

File:LowerBedPlate.png| '''Lower Bed Plate''' [[File:LowerBedPlate.FCStd]].

File:EMTConduit.png| '''EMT Conduit''' for Heated Bed [[File:EMTConduit.fcstd]].

File:BedRod.png| '''Bed Holding Rod''' [[File:BedRod.fcstd]].

File:YAxisRod.png| '''Y Axis Rod''' [[File:YAxisRod.fcstd]].

File:Pulley.png| '''GT2 Belt Pulley''', 20 teeth, 6mm wide, 5mm bore [[File:Pulley.fcstd]].

File:XZAxisRod.png| '''X Axis''' and '''Z Axis Rod''' [[File:XZAxisRod.fcstd]].

File:SpoolRod.png| '''Spool Holding Rod''' [[File:SpoolRod.fcstd]].

File:RJ4JP 01 08LinearBearings.png| '''RJ4JP-01-08 Linear Bearings''' [[File:RJ4JP-01-08LinearBearings.fcstd]].

File:MF126ZZBearings.png| '''MF126ZZ Bearings''' [[File:MF126ZZBearings.fcstd]].

File:YBelt.png| '''Y Axis Belt''' [[File:YBelt.FCStd]].

File:D3DUniversal3CarbonFiberStrip.png| '''Carbon Fiber Strip''' [[File:D3DUniversal3CarbonFiberStrip.FCStd]].

File:D3DUniversal3CarbonFiberBlanket.png| '''Carbon Fiber Blanket''' [[File:D3DUniversal3CarbonFiberBlanket.FCStd]].

File:PEISurface.png| '''PEI Printing Surface''' [[File:PEISurface.fcstd]].

File:DoubleSidedTape.png| '''Double Sided Adhesive Tape''' [[File:DoubleSidedTape.fcstd]].

File:UpperBedPlate.png| '''Upper Bed Plate''' [[File:UpperBedPlate.FCStd]].

File:XZBelt.png| '''X Axis''' and '''Z Axis Belt''' [[File:XZBelt.FCStd]]

</gallery>

==Extruder==
From [[D3D_Universal_3D_CAD#Printer_Extruder_-_Universal_Gearless_Extruder]]. Missing: Volcano nozzle.

<gallery perrow=6>

File:Finalextruder.png|'''Extruder assembly''' - Gitlab - [https://gitlab.com/marcin_ose/d3d-universal/blob/master/SimpleExtruder.FCStd]. FreeCAD - [[File:simpleextruderassy.fcstd]]

File:mainextruderpart.png|'''Main extruder part.''' - Gitlab - [https://gitlab.com/marcin_ose/d3d-universal/blob/master/ExtruderMotorBracket.FCStd]. FreeCAD - [[File:mainextruderpart.fcstd]]. STL - [[File:extruder_main.stl]]

File:ExtrCoolSensPltr.png|'''Extruder Active Cooling with Sensor Mount + Plotter Mount''' [[File:ExtrCoolSensPlt.fcstd]]. STL - Cooling/Sensor/Plotter Mount - [[File:ExtrCoolSensPlt.stl]]

File:tensioner.png|'''Spring tensioner''' -[[File:SpringTensioner.FCStd]]. STL - [[File:Tensioner.stl]]

File:extruderspring.png|Extruder Spring for [[Simple Extruder]]. Buy + spec - [https://www.mcmaster.com/94125k616]. FreeCAD file - [[File:extruderspring.fcstd]]

File:HeatSinkJig.png|'''Jig to cut the heat sink''' -[[File:HeaterSinkJig.FCStd]]

File:fixedsink.png|'''heat sink''' -[[File:HeatSink.FCStd]]. Technical drawing - [[File:Heatsinktechdraw.FCSTD]]

File:Heatsinktechdraw.jpg|'''heat sink''' - Technical drawing.

File:volcanoheaterblock.png|'''Volcano heater block'''. [[File:volcanoheaterblock.fcstd]].
File:5015blower.jpg|[[File:5015blower.fcstd]] '''5015 Blower''' - positionally correct for D3D Universal.

File:8mmsensor.jpg|8 mm sensor. Download - [[File:8mmsensor.fcstd]]

File:608Bearing.png|608 skateboard 8x22x7 mm Bearing. Download - [[File:608Bearing.FCStd]]

File:40x10fan.png|'''40x10mm fan''' [[File:40x10fan.fcstd]]

File:steppermotor.png| '''Stepper Motor'''[[File:steppermotor.fcstd]]

File:steppermotor2.png| '''Stepper Motor from Faceplate'''[[File:Nema17face.fcstd]]

File:drivegear.png| '''Drive Gear'''[[File:drivegear.fcstd]]

File:3heatbreak.png| '''3 mm heat break.'''[[File:3heatbreak.fcstd]]. Re-Source - [https://gitlab.com/marcin_ose/titan-aero-cad/blob/master/Titan_Aero_Mirrored.fcstd]

File:heatsink.png| '''4040 heatsink.'''[[File:heatsink.fcstd]]

</gallery>

=Links=
*[[D3D Universal v21.06]]

File:XZBelt.png

2022-02-01T13:24:37Z

Calligarov:

File:XZBelt.FCStd

2022-02-01T13:24:20Z

Calligarov:

File:ScrewM4x30.FCStd

2022-02-01T13:23:35Z

Calligarov: