Open Source Ecology - User contributions [en]

Emilio Log

2022-02-23T05:41:23Z

Emilio Vargas:

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Emilio?start=9/1/2019"></iframe></html>

{{RightTOC}}

=Tue Feb 22, 2022=
Succeeded in setting up OSE Linux on old macbook pro (early 2015). Opened FreeCAD and made [https://drive.google.com/drive/folders/1Wd6OvXfVWr2uT5JVtZWZxPW4BufQer7l?usp=sharing a 'hello world' design]
8

=Mon Feb 21 2022=
OSE Linux progress: Set up a bootable drive on a Samsung External SSD. Had success setting it up and booting from it. But I couldn't use keyboard or trackpad on a Macbook Pro 2019 with it. This seems to be a known issue with newer Macbooks (late 2016 onwards) and Ubuntu (which Mint is based on). See [https://apple.stackexchange.com/questions/310290/keyboard-and-touchpad-are-not-working-when-booting-from-live-usb stackexchange on it].

=Fri Feb 18, 2022=
Bought tools for build (soldering kit, lubricant for frame, heat gun, metal file, safety glasses).

=Thu Feb 17, 2022=
9. Set up software environment - OSE Linux. (Work in Progress)
I'm on a mac, the drive didn't work out of the box, I wiped and re-created it from the downloadable ISO on the wiki but no luck so far.

=Wed Feb 16, 2022=
4. Bought spray paint.

5. Learned about all the parts involved - went through the modules.
# [https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07](https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07)
# Learned what an extruder was.

6. Went through the manual initially (found upgraded version) on the d3d page.
# Made my own of each module.

7. Clean off extra plastic from frame parts. [50 mins]

8. Painted all frame parts (before assembly) - 8 corners, 12 steel angle, heatbed.

=Tue Feb 16, 2022=
1. Unpack box & picture equipment.

2. Organize equipment in desk.

3. Read about tools required - need spray paint.

Emilio Log

2022-02-23T05:28:31Z

Emilio Vargas:

Emilio Log

2022-02-22T01:33:48Z

Emilio Vargas:

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Emilio?start=9/1/2019"></iframe></html>

{{RightTOC}}

=Thu Feb 17, 2022=
9. Set up software environment - OSE Linux. (Work in Progress)
I'm on a mac, the drive didn't work out of the box, I wiped and re-created it from the downloadable ISO on the wiki but no luck so far.

=Wed Feb 16, 2022=
4. Bought spray paint.

5. Learned about all the parts involved - went through the modules.
# [https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07](https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07)
# Learned what an extruder was.

6. Went through the manual initially (found upgraded version) on the d3d page.
# Made my own of each module.

7. Clean off extra plastic from frame parts. [50 mins]

8. Painted all frame parts (before assembly) - 8 corners, 12 steel angle, heatbed.

=Tue Feb 16, 2022=
1. Unpack box & picture equipment.

2. Organize equipment in desk.

3. Read about tools required - need spray paint.

Emilio Log

2022-02-22T01:31:48Z

Emilio Vargas:

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Emilio?start=9/1/2019"></iframe></html>

{{RightTOC}}

=Thu Feb 17, 2022=
9. Set up software environment - OSE Linux. (Work in Progress)
I'm on a mac, the drive didn't work out of the box, I wiped and re-created it from the downloadable ISO on the wiki but no luck so far.

=Wed Feb 16, 2022=
4. Bought spray paint.
5. Learned about all the parts involved - went through the modules.
# [https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07](https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07)
# Learned what an extruder was.
6. Went through the manual initially (found upgraded version) on the d3d page.
# Made my own of each module.
7. Clean off extra plastic from frame parts. [50 mins]
8. Painted all frame parts (before assembly) - 8 corners, 12 steel angle, heatbed.

=Tue Feb 16, 2022=
1. Unpack box & picture equipment.
2. Organize equipment in desk.
3. Read about tools required - need spray paint.

Emilio Log

2022-02-18T22:19:04Z

Emilio Vargas:

{{RightTOC}}

=Thu Feb 17, 2022=
9. Set up software environment - OSE Linux. (Work in Progress)
I'm on a mac, the drive didn't work out of the box, I wiped and re-created it from the downloadable ISO on the wiki but no luck so far.

=Wed Feb 16, 2022=
4. Bought spray paint.
5. Learned about all the parts involved - went through the modules.
# [https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07](https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07)
# Learned what an extruder was.
6. Went through the manual initially (found upgraded version) on the d3d page.
# Made my own of each module.
7. Clean off extra plastic from frame parts. [50 mins]
8. Painted all frame parts (before assembly) - 8 corners, 12 steel angle, heatbed.

=Tue Feb 16, 2022=
1. Unpack box & picture equipment.
2. Organize equipment in desk.
3. Read about tools required - need spray paint.

Emilio Log

2022-02-18T22:16:47Z

Emilio Vargas: Created page with "{{RightTOC}} =Thu Feb 17, 2022= 9. Set up software environment - OSE Linux. I'm on a mac, the drive didn't work out of the box, I wiped and re-created it from the downloada..."

{{RightTOC}}

=Thu Feb 17, 2022=
9. Set up software environment - OSE Linux.
I'm on a mac, the drive didn't work out of the box, I wiped and re-created it from the downloadable ISO on the wiki but no luck so far.

=Wed Feb 16, 2022=
4. Bought spray paint.
5. Learned about all the parts involved - went through the modules.
# [https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07](https://wiki.opensourceecology.org/wiki/D3D_Pro_v20.07)
# Learned what an extruder was.
6. Went through the manual initially (found upgraded version) on the d3d page.
# Made my own of each module.
7. Clean off extra plastic from frame parts. [50 mins]
8. Painted all frame parts (before assembly) - 8 corners, 12 steel angle, heatbed.

=Tue Feb 16, 2022=
1. Unpack box & picture equipment.
2. Organize equipment in desk.
3. Read about tools required - need spray paint.