https://wiki.opensourceecology.org/api.php?action=feedcontributions&feedformat=atom&user=Gabriel+Kind 2026-04-20T02:07:03Z User contributions MediaWiki 1.39.13 https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=121533 2014-07-15T21:26:50Z

<p>Gabriel Kind: /* July 15 */</p> <hr /> <div>==July 15==<br /> *Continued work on the [https://github.com/LovingProfessional/Open-CEB-Press code] of the CEB controller<br /> *Welded lots and lots of clamps together<br /> <br /> ==July 10==<br /> *Positioned primary arms<br /> *Retrieved and assembled pipe clamps from menards<br /> <br /> ==July 11==<br /> *Performed diagnostic work on the power cube<br /> <br /> ==July 13==<br /> *Bored holes in various CEB parts<br /> *Began coding test procedures for the CEB press<br /> <br /> ==July 14==<br /> *Bored holes in CEB parts<br /> *Created test procedures and began working on automated procedure<br /> <br /> ==June 25==<br /> *Performed further test cuts<br /> *Added a prototype for adjustment of pierce time<br /> *Added an interface for z axis control through Lasersaur App<br /> <br /> ==June 24==<br /> *Continued Overall assembly module<br /> *Completed grouping of latest CEB press fcstd<br /> *Temporarily fixed a problem with the Torch table path ordering. Paths can be ordered modified with svg editor inkscape prior to export. Tools such as gcodetools<br /> *Performed several test cuts<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> ==June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=121532 2014-07-15T21:26:13Z

<p>Gabriel Kind: </p> <hr /> <div>==July 15==<br /> Continued work on the [https://github.com/LovingProfessional/Open-CEB-Press code] of the CEB controller<br /> <br /> ==July 10==<br /> *Positioned primary arms<br /> *Retrieved and assembled pipe clamps from menards<br /> <br /> ==July 11==<br /> *Performed diagnostic work on the power cube<br /> <br /> ==July 13==<br /> *Bored holes in various CEB parts<br /> *Began coding test procedures for the CEB press<br /> <br /> ==July 14==<br /> *Bored holes in CEB parts<br /> *Created test procedures and began working on automated procedure<br /> <br /> ==June 25==<br /> *Performed further test cuts<br /> *Added a prototype for adjustment of pierce time<br /> *Added an interface for z axis control through Lasersaur App<br /> <br /> ==June 24==<br /> *Continued Overall assembly module<br /> *Completed grouping of latest CEB press fcstd<br /> *Temporarily fixed a problem with the Torch table path ordering. Paths can be ordered modified with svg editor inkscape prior to export. Tools such as gcodetools<br /> *Performed several test cuts<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> ==June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=121525 2014-07-15T01:30:37Z

<p>Gabriel Kind: </p> <hr /> <div>==July 10==<br /> *Positioned primary arms<br /> *Retrieved and assembled pipe clamps from menards<br /> <br /> ==July 11==<br /> *Performed diagnostic work on the power cube<br /> <br /> ==July 13==<br /> *Bored holes in various CEB parts<br /> *Began coding test procedures for the CEB press<br /> <br /> ==July 14==<br /> *Bored holes in CEB parts<br /> *Created test procedures and began working on automated procedure<br /> <br /> ==June 25==<br /> *Performed further test cuts<br /> *Added a prototype for adjustment of pierce time<br /> *Added an interface for z axis control through Lasersaur App<br /> <br /> ==June 24==<br /> *Continued Overall assembly module<br /> *Completed grouping of latest CEB press fcstd<br /> *Temporarily fixed a problem with the Torch table path ordering. Paths can be ordered modified with svg editor inkscape prior to export. Tools such as gcodetools<br /> *Performed several test cuts<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> ==June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=121000 2014-06-26T20:39:30Z

<p>Gabriel Kind: </p> <hr /> <div>==June 25==<br /> *Performed further test cuts<br /> *Added a prototype for adjustment of pierce time<br /> *Added an interface for z axis control through Lasersaur App<br /> <br /> ==June 24==<br /> *Continued Overall assembly module<br /> *Completed grouping of latest CEB press fcstd<br /> *Temporarily fixed a problem with the Torch table path ordering. Paths can be ordered modified with svg editor inkscape prior to export. Tools such as gcodetools<br /> *Performed several test cuts<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> ==June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=CNC_Torch_Table&diff=120836 2014-06-25T17:46:57Z

<p>Gabriel Kind: </p> <hr /> <div>[[Image:CNC Torch Tablepic.jpg|thumb|360px|CNC Torch Table Prototype I, used in [[2011 Production Run]] ]]<br /> <br /> =Overview=<br /> <br /> The '''CNC Torch Table''' (aka RepTab) is an enabling machine for any workshop. This machine enables creation of custom parts for fabrication or replacement of broken components.<br /> <br /> =Current team goals=<br /> <br /> Current team goals as of June 5 2014 for the end of June 2014.<br /> <br /> *Have the torch cutting steel, up to 1&quot; thick, to a tolerance of 1/16&quot; over 10 inches on all dimensions, and within 1/16 of a straight line re the waviness of the line. It is ok if it takes some manual intervention, or hand holding.<br /> *The machine should be reasonably durable and not finicky or prone to breakage, or absurdly high wear and tear. For example, the wiring is currently prone to breakage. Also the arduino on the z control would probably stop working pretty fast from the stuff splattering on it.<br /> <br /> This entails meeting milestone 1 in the torch table prototype 2 requirements document (see dev board through dozuki, overall module, requirements document).<br /> <br /> *for the short term, make sure the documentation is at the point that someone can easily step in to Anthony's role in getting things working, and to operate the table for cutting.<br /> <br /> *record why we made the system the way we have so far, rather than some other way. This is important to avoid the need to go over the same ground too many times.<br /> <br /> <br /> =Versions=<br /> <br /> ==Version 2==<br /> <br /> See the dev board linked to on the dozuki (the way to go as of June 5 2014)<br /> <br /> Click [https://docs.google.com/presentation/d/1xP9DPNJCCk1W5qAAmzd1gJPssEO_OroHMuQ-THP5GPg/edit?usp=sharing: here] to access set-up instructions (in-progress)<br /> <br /> ==Version 1==<br /> <br /> There's a little bit of info at [[CNC Torch Table 1]].<br /> <br /> =Details=<br /> <br /> The CNC Torch Table allows workshops to create replacement parts on the fly for many of the components used in the GVCS. Additionally, the Torch Table gives workshops the ability to create many of the custom components used in the GVCS Machines. Many parts that make up the 50 GVCS Tools can be cut on the CNC Torch Table, making this machine valuable for replication.<br /> <br /> <br /> ==Documentation==<br /> Much of the current documentation and raw data concerning <br /> <br /> =Product Ecology=<br /> <br /> [[Image:2b-Genfabecology.png|360px|thumb|General Fabrication [[Product Ecology]]]]<br /> '''Made with'''<br /> *{{Multimachine}} - Precision Guides, bearings<br /> *{{Ironworker}}<br /> '''Creates'''<br /> *{{Lifetrac}} - Plates, holes<br /> *{{CEB}} - Holes<br /> *[[QA Plates]]<br /> <br /> See [[Product Ecologies]] for more information.<br /> <br /> <br /> =See Also=<br /> <br /> *[[CNC Torch Table Crash Course]]<br /> *[[CNC Torch Table/Research Development|Research &amp; Development]]<br /> *[[CNC Torch Table/Bill of Materials|Bill of Materials]]<br /> *[[CNC Torch Table/Manufacturing Instructions|Manufacturing Instructions]]<br /> *[[CNC Torch Table/User's Manual|User's Manual]]<br /> *[https://github.com/OSE/CNC-Torch-Table-OSE CNC Torch Table Github Repo]<br /> *[https://groups.google.com/forum/#!forum/ose-cnc-torch-table-development OSE CNC Torch Table Development Google Group / Mailing List]<br /> *[http://opensourceecology.dozuki.com/c/CNC_Torch_and_Router_Table CNC Torch and Router Table on Dozuki]<br /> <br /> [[Category:GVCS]][[Category:Product Ecology]][[Category:CNC Torch Table]]<br /> {{GVCS Footer}}</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120821 2014-06-25T12:32:55Z

<p>Gabriel Kind: </p> <hr /> <div>==June 24==<br /> *Continued Overall assembly module<br /> *Completed grouping of latest CEB press fcstd<br /> *Temporarily fixed a problem with the Torch table path ordering. Paths can be ordered modified with svg editor inkscape prior to export. Tools such as gcodetools<br /> *Performed several test cuts<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> ==June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gimp&diff=120813 2014-06-24T17:28:30Z

<p>Gabriel Kind: </p> <hr /> <div>GIMP is the GNU Image Manipulation Program. It is a freely distributed piece of software for such tasks as photo retouching, image composition and image authoring. It works on many operating systems, in many languages. GIMP is often cited as a replacement for Adobe Photoshop<br /> <br /> * http://www.gimp.org/<br /> * http://en.wikipedia.org/wiki/GIMP<br /> <br /> ==Re-sizing Images==<br /> '''Note:''' For this method to work on any Linux distribution, you must install the 'gimp-plugin-registry' package and restart GIMP.<br /> <br /> You may often find the need to resize several images at once in order to work with them on a computer without dedicated graphics, or to upload them at a reasonable speed. To resize many images quickly, open GIMP (no file necessary) and on the Menu Bar select Filters -&gt; Batch -&gt; David's Batch Processor.<br /> <br /> Now add the desired files and select the 're-size' tab. Check the 'enable' box and select the desired ''relative'' size reduction, making sure to keep the same ratio. <br /> <br /> You can use the dropdown menu in the 'output' tab to convert to whichever image formats you'd like.<br /> <br /> Near the bottom of this window, press the 'start' button.<br /> <br /> [[Category:Collaboration]]<br /> [[Category:Software]]<br /> [[Category:Open Source Software]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=CEB_Press/Current_Downloads&diff=120811 2014-06-24T16:46:29Z

<p>Gabriel Kind: </p> <hr /> <div><br /> =Overview=<br /> <br /> This page contains a list of the most up to date files that have been uploaded to the OSE Wiki relating to the CEB Press fabrication. This list is an attempt to organize the latest critical CAD data, spreadsheets, code, etc for the current revision into one location. <br /> <br /> The latest documentation for the CEB Press is currently available for the revision 6 or &quot;CEB Press prototype VI&quot;. There will most likely be errors that will need correcting. Please note any errors in the discussion section.<br /> <br /> =CAD Data=<br /> <br /> ==Metal==<br /> <br /> *This zip files contains 2d pdf files for CEB 6 parts and assemblies, each sub-assembly has it's own pdf.<br /> **'''[[File:CEBVI Fab Drawings.pdf]] - 65 pages of drawings'''<br /> **[[File:CEBVI 2D DRAWING PDF.zip]] - may not work on some computers<br /> <br /> *Step file for complete 3d model (CEB 6) without electronics <br /> **[[File:01-001-00-6.stp]]<br /> <br /> *NEW Freecad 3d model with proper grouping<br /> **[[File:CEBPressJuneGroup.fcstd]]<br /> <br /> *This zip file is the original Alibre design files, 3d and 2d, that was used to make the step files and pdf files.<br /> **[[File:CEBVI ALIBRE FILES.zip]]<br /> <br /> ==CNC Metal Cutting Files==<br /> *These files are dxf files that can be easily imported into CNC cutting machines (i.e. laser-cutter, waterjet, plasma, or torch cutter). These files were originally introduced in the [[OSE Christmas Gift to the World 2012]]. Having these files machine cut would save a large amount of time that would otherwise be spent sawing material and drilling holes. These parts are blanks that are welded together (in most cases) in order to make the parts detailed in CEBVI.ZIP listed above.<br /> **[[File:.5IN_STEEL_LIBRARY.dxf]] - 1/2&quot; steel<br /> **[[File:.125_STEEL_LIBRARY.dxf]] - 1/8&quot; steel<br /> **[[File:.25_STEEL_LIBRARY.dxf]] - 1/4&quot; steel<br /> <br /> ==Plastic - MTU Remote Prototyping==<br /> *STL files for parts that were designed to be 3d printed<br /> **[[File:01-222-00-2.STL]] <br /> **[[File:01-238-00-0.STL]]<br /> <br /> Part 1:<br /> <br /> &lt;html&gt;&lt;iframe class=&quot;sculpteo-viewer&quot; type=&quot;text/html&quot; width=&quot;300&quot; height=&quot;360&quot; src=&quot;http://www.sculpteo.com/embed/design/9FhvWnCS&quot; frameborder=&quot;0&quot; scrolling=&quot;no&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> <br /> ==Sourcing of 3D Prints==<br /> $15 per piece from http://Sculpteo.com : but scale is off by about a factor of 2<br /> <br /> [[Image:clams1.jpg|600px]]<br /> <br /> =Electronics=<br /> *2012 electronics; however, latest versions have gone back to using the arduino.<br /> **[[Detroit_Fab_Lab_Solenoid_Driver_v4]]<br /> <br /> **controller pics[https://docs.google.com/drawings/d/1AxeT5boHsEPlywFx8O94khOHOpDnSFwuXK3kAgsHP1c/edit]<br /> <br /> =Hydraulics=<br /> **[[CEB_Press/Research_Development/Hydraulic_Design |Hydraulic Design]]<br /> <br /> =BOM=<br /> *Master bill of materials.<br /> **[[File:01-001-00-6 BILL OF MATERIALS.ods]]<br /> <br /> *Electronics BOM (May 2013)<br /> **[https://docs.google.com/spreadsheet/ccc?key=0Av4ZjQn4DHJHdEwxb1VxUUtPTXItdENtSlRSbDNsX0E#gid=0]<br /> <br /> =Software=<br /> *this is the program file that runs on the Arduino micro controller that is installed on the CEB Press.<br /> [[File:CEBOperationTest.ino]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:CEB Press]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120810 2014-06-24T16:44:20Z

<p>Gabriel Kind: /* June 13= */</p> <hr /> <div>==June 24==<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> ==June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120809 2014-06-24T16:43:22Z

<p>Gabriel Kind: </p> <hr /> <div>==June 24==<br /> <br /> ==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> *Weeded lots<br /> *Wrote instructional for gas operation of Torch Table<br /> *Began partitioning of new CEB model <br /> *Cleared out the solar house and organized contents<br /> *Discussed future innovations to collaborative architecture<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=File:CEBPressJuneGroup.fcstd&diff=120808 2014-06-24T16:42:42Z

<p>Gabriel Kind: The Newest grouped CEB press fcstd</p> <hr /> <div>The Newest grouped CEB press fcstd</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120788 2014-06-23T17:33:12Z

<p>Gabriel Kind: </p> <hr /> <div>==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> *Sealed holes in solar house<br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120783 2014-06-23T15:56:34Z

<p>Gabriel Kind: </p> <hr /> <div>==June 23==<br /> *Added a tut on the [[GIMP]] page <br /> *Added a tutorial to download the latest version of [[FreeCAD]]<br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> <br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=FreeCAD&diff=120782 2014-06-23T15:56:08Z

<p>Gabriel Kind: /* FreeCAD Download */</p> <hr /> <div>=FreeCAD Download=<br /> To get the latest version of FreeCAD open a terminal window and enter the following<br /> <br /> ''sudo apt-get purge freecad''<br /> <br /> ^(Do this first step only if you have already installed an earlier version of FreeCad)<br /> <br /> ''sudo add-apt-repository ppa:freecad-maintainers/freecad-stable''<br /> <br /> ''sudo apt-get update''<br /> <br /> ''sudo apt-get install freecad''<br /> <br /> =FreeCAD Instructinals=<br /> ==Navigating and Measuring==<br /> ==Changing Colors==<br /> ==Modifying and Moving Parts==<br /> <br /> =Action Plan=<br /> <br /> Recruit software developer to analyze FreeCAD and build with/upon their work. Short-term Objective: Get Assembly Module Working.<br /> <br /> Document FreeCAD source code in github repository.<br /> <br /> Document FreeCAD's code structure.<br /> <br /> =Info=<br /> <br /> [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page FreeCAD Website]<br /> <br /> =FreeCAD Bugtracker/Issue Queue=<br /> &lt;div style=&quot;background-color:lightgreen; border: #000 1px solid; width:50%;border-radius:5px;&quot;&gt;<br /> &lt;rss&gt;http://www.freecadweb.org/tracker/issues_rss.php?project_id=0&lt;/rss&gt;<br /> &lt;/div&gt;<br /> <br /> =Temp=<br /> <br /> Ok, first FreeCAD:<br /> <br /> As they say themselves, it is still in the early stages of<br /> development. I (Conor) have searched for documentation, and apart from the<br /> getstarted [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Getting_started]<br /> there are 2 nice articles from December (so version 0.9, which btw. is<br /> in Lucid already). The funny thing is that for some reason, both are<br /> in... Polish! I understand you have polish origins, so maybe you speak<br /> Polish. Otherwise just google translate. They give you examples and a<br /> better idea of what it is right now capable of. <br /> [http://www.ubucentrum.net/2009/12/rozpoczynamy-zabawe-z-freecad-krok-po.html] <br /> [http://wkupiesila.blogspot.com/2009/12/freecad-poznajemy-klawisz-f5.html]<br /> <br /> So I propose the following: you try to reproduce the steps in the<br /> articles, so you get a feeling for it. But then regardless stick with<br /> Blender a bit longer, and try FreeCAD again when version 0.11 or 0.12<br /> comes out.<br /> <br /> == Undo doesn't work ==<br /> Using FreeCAD 0.13.1828 on Windows. <br /> <br /> * Situation: I draw a box and modify it's size. Then I hit Ctrl+Z (or Redo from the menu).<br /> * What happens: Box is deleted :-(<br /> * Expected: Box returns to old size.<br /> <br /> =OSE FreeCAD Documentation=<br /> <br /> I (Mark Norton) have created a very simply, introductory guide to FreeCAD. It only covers the very basics at this point, but we can expand on it as needed. - [[User:Mjn]]<br /> <br /> [[File:FreeCAD-3.pdf]]<br /> <br /> This document covers the following topics:<br /> <br /> * Views<br /> * Workshops<br /> * Sizing a Primitive Part<br /> * Positioning a Part<br /> * Making a Cut<br /> * Combining Parts<br /> * Rotating a Part<br /> * Extrusion<br /> <br /> See also, FreeCAD Documentation and Tutorials [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page].<br /> <br /> == Related ==<br /> * [[FreeCAD Survival Guide]]<br /> <br /> =OSE FreeCAD Requirements=<br /> For OSE to use FreeCAD for all of its design needs, these are the functions required. Do these exist? Please comment.<br /> <br /> *Freehand drawing of shapes and extrusion (like Sketchup).[[Image:check.png]]<br /> *Adding parameters to all of the shapes, so they can be modified. [[Image:check.png]]<br /> *Modifying all parameters in 3D parametrically (typing in lengths) [[Image:check.png]]<br /> *Modifying all parameters in 3D with the mouse (such as dragging corners, edges, and faces)<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;This is not possible and will not be in the future. This kind of behavior needs quite advanced back-end functionality which is not provided by our geometric modeling kernel&quot;<br /> <br /> *Adding parameters in 3D parametrically (boolean operations)? [[Image:check.png]]<br /> *Adding parameters in 3D by drawing them and extruding (mouse-based boolean operations)<br /> *Adding parameters to shapes in 3D parametrically (such as drawing in new objects parametrically)?<br /> *Adding parameters to shapes in 3D manually (such as drawing in new objects with a mounse)?<br /> *For multiple objects, moving them with the mouse to arrange, mate, align them.<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;That is not yet possible. The assembly workbench is in a very early design phase and still needs quite some time. That is true for basic functionality and integration into freecad workflows.&quot;<br /> <br /> *Grouping and ungrouping objects into assemblies?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;not yet but will be possible with upcoming assembly workbench&quot;<br /> <br /> *Maintaining parametric nature of grouped objects?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;not yet, but will be possible with the upcoming assembly workbench&quot;<br /> <br /> Now for interoperability with other CAD packages:<br /> <br /> *Importing multiple new objects into a drawing - one at a time?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: 'currently you can only import whole files, not individual objects from a file'<br /> <br /> *Importing multiple objects into a model - all at one time? [[Image:check.png]]<br /> *Importing new objects while passing the parametric values into FreeCAD, such as with a STEP file?<br /> <br /> =Tutorials=<br /> ==Bram De Vries==<br /> Tutorials 1-8:<br /> <br /> &lt;html&gt;&lt;iframe width=&quot;420&quot; height=&quot;315&quot; src=&quot;//www.youtube.com/embed/siqXdX2iwm4&quot; frameborder=&quot;0&quot; allowfullscreen&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> [[Category:CAD]]<br /> [[Category:Digital Fabrication]]<br /> [[Category:Software]]<br /> [[Category:Open Source Software]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=FreeCAD&diff=120781 2014-06-23T15:55:46Z

<p>Gabriel Kind: /* FreeCAD Download */</p> <hr /> <div>=FreeCAD Download=<br /> To get the latest version of FreeCAD open a terminal window and enter the following<br /> <br /> ''sudo apt-get purge freecad''(Do this first step only if you have already installed an earlier version of FreeCad)<br /> <br /> ''sudo add-apt-repository ppa:freecad-maintainers/freecad-stable''<br /> <br /> ''sudo apt-get update''<br /> <br /> ''sudo apt-get install freecad''<br /> <br /> =FreeCAD Instructinals=<br /> ==Navigating and Measuring==<br /> ==Changing Colors==<br /> ==Modifying and Moving Parts==<br /> <br /> =Action Plan=<br /> <br /> Recruit software developer to analyze FreeCAD and build with/upon their work. Short-term Objective: Get Assembly Module Working.<br /> <br /> Document FreeCAD source code in github repository.<br /> <br /> Document FreeCAD's code structure.<br /> <br /> =Info=<br /> <br /> [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page FreeCAD Website]<br /> <br /> =FreeCAD Bugtracker/Issue Queue=<br /> &lt;div style=&quot;background-color:lightgreen; border: #000 1px solid; width:50%;border-radius:5px;&quot;&gt;<br /> &lt;rss&gt;http://www.freecadweb.org/tracker/issues_rss.php?project_id=0&lt;/rss&gt;<br /> &lt;/div&gt;<br /> <br /> =Temp=<br /> <br /> Ok, first FreeCAD:<br /> <br /> As they say themselves, it is still in the early stages of<br /> development. I (Conor) have searched for documentation, and apart from the<br /> getstarted [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Getting_started]<br /> there are 2 nice articles from December (so version 0.9, which btw. is<br /> in Lucid already). The funny thing is that for some reason, both are<br /> in... Polish! I understand you have polish origins, so maybe you speak<br /> Polish. Otherwise just google translate. They give you examples and a<br /> better idea of what it is right now capable of. <br /> [http://www.ubucentrum.net/2009/12/rozpoczynamy-zabawe-z-freecad-krok-po.html] <br /> [http://wkupiesila.blogspot.com/2009/12/freecad-poznajemy-klawisz-f5.html]<br /> <br /> So I propose the following: you try to reproduce the steps in the<br /> articles, so you get a feeling for it. But then regardless stick with<br /> Blender a bit longer, and try FreeCAD again when version 0.11 or 0.12<br /> comes out.<br /> <br /> == Undo doesn't work ==<br /> Using FreeCAD 0.13.1828 on Windows. <br /> <br /> * Situation: I draw a box and modify it's size. Then I hit Ctrl+Z (or Redo from the menu).<br /> * What happens: Box is deleted :-(<br /> * Expected: Box returns to old size.<br /> <br /> =OSE FreeCAD Documentation=<br /> <br /> I (Mark Norton) have created a very simply, introductory guide to FreeCAD. It only covers the very basics at this point, but we can expand on it as needed. - [[User:Mjn]]<br /> <br /> [[File:FreeCAD-3.pdf]]<br /> <br /> This document covers the following topics:<br /> <br /> * Views<br /> * Workshops<br /> * Sizing a Primitive Part<br /> * Positioning a Part<br /> * Making a Cut<br /> * Combining Parts<br /> * Rotating a Part<br /> * Extrusion<br /> <br /> See also, FreeCAD Documentation and Tutorials [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page].<br /> <br /> == Related ==<br /> * [[FreeCAD Survival Guide]]<br /> <br /> =OSE FreeCAD Requirements=<br /> For OSE to use FreeCAD for all of its design needs, these are the functions required. Do these exist? Please comment.<br /> <br /> *Freehand drawing of shapes and extrusion (like Sketchup).[[Image:check.png]]<br /> *Adding parameters to all of the shapes, so they can be modified. [[Image:check.png]]<br /> *Modifying all parameters in 3D parametrically (typing in lengths) [[Image:check.png]]<br /> *Modifying all parameters in 3D with the mouse (such as dragging corners, edges, and faces)<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;This is not possible and will not be in the future. This kind of behavior needs quite advanced back-end functionality which is not provided by our geometric modeling kernel&quot;<br /> <br /> *Adding parameters in 3D parametrically (boolean operations)? [[Image:check.png]]<br /> *Adding parameters in 3D by drawing them and extruding (mouse-based boolean operations)<br /> *Adding parameters to shapes in 3D parametrically (such as drawing in new objects parametrically)?<br /> *Adding parameters to shapes in 3D manually (such as drawing in new objects with a mounse)?<br /> *For multiple objects, moving them with the mouse to arrange, mate, align them.<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;That is not yet possible. The assembly workbench is in a very early design phase and still needs quite some time. That is true for basic functionality and integration into freecad workflows.&quot;<br /> <br /> *Grouping and ungrouping objects into assemblies?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;not yet but will be possible with upcoming assembly workbench&quot;<br /> <br /> *Maintaining parametric nature of grouped objects?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;not yet, but will be possible with the upcoming assembly workbench&quot;<br /> <br /> Now for interoperability with other CAD packages:<br /> <br /> *Importing multiple new objects into a drawing - one at a time?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: 'currently you can only import whole files, not individual objects from a file'<br /> <br /> *Importing multiple objects into a model - all at one time? [[Image:check.png]]<br /> *Importing new objects while passing the parametric values into FreeCAD, such as with a STEP file?<br /> <br /> =Tutorials=<br /> ==Bram De Vries==<br /> Tutorials 1-8:<br /> <br /> &lt;html&gt;&lt;iframe width=&quot;420&quot; height=&quot;315&quot; src=&quot;//www.youtube.com/embed/siqXdX2iwm4&quot; frameborder=&quot;0&quot; allowfullscreen&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> [[Category:CAD]]<br /> [[Category:Digital Fabrication]]<br /> [[Category:Software]]<br /> [[Category:Open Source Software]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=FreeCAD&diff=120780 2014-06-23T15:55:27Z

<p>Gabriel Kind: </p> <hr /> <div>=FreeCAD Download=<br /> To get the latest version of FreeCAD open a terminal window and enter the following<br /> <br /> ''sudo apt-get purge freecad''(Do this first step only if you have already installed an earlier version of FreeCad)<br /> ''sudo add-apt-repository ppa:freecad-maintainers/freecad-stable''<br /> ''sudo apt-get update''<br /> ''sudo apt-get install freecad''<br /> <br /> =FreeCAD Instructinals=<br /> ==Navigating and Measuring==<br /> ==Changing Colors==<br /> ==Modifying and Moving Parts==<br /> <br /> =Action Plan=<br /> <br /> Recruit software developer to analyze FreeCAD and build with/upon their work. Short-term Objective: Get Assembly Module Working.<br /> <br /> Document FreeCAD source code in github repository.<br /> <br /> Document FreeCAD's code structure.<br /> <br /> =Info=<br /> <br /> [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page FreeCAD Website]<br /> <br /> =FreeCAD Bugtracker/Issue Queue=<br /> &lt;div style=&quot;background-color:lightgreen; border: #000 1px solid; width:50%;border-radius:5px;&quot;&gt;<br /> &lt;rss&gt;http://www.freecadweb.org/tracker/issues_rss.php?project_id=0&lt;/rss&gt;<br /> &lt;/div&gt;<br /> <br /> =Temp=<br /> <br /> Ok, first FreeCAD:<br /> <br /> As they say themselves, it is still in the early stages of<br /> development. I (Conor) have searched for documentation, and apart from the<br /> getstarted [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Getting_started]<br /> there are 2 nice articles from December (so version 0.9, which btw. is<br /> in Lucid already). The funny thing is that for some reason, both are<br /> in... Polish! I understand you have polish origins, so maybe you speak<br /> Polish. Otherwise just google translate. They give you examples and a<br /> better idea of what it is right now capable of. <br /> [http://www.ubucentrum.net/2009/12/rozpoczynamy-zabawe-z-freecad-krok-po.html] <br /> [http://wkupiesila.blogspot.com/2009/12/freecad-poznajemy-klawisz-f5.html]<br /> <br /> So I propose the following: you try to reproduce the steps in the<br /> articles, so you get a feeling for it. But then regardless stick with<br /> Blender a bit longer, and try FreeCAD again when version 0.11 or 0.12<br /> comes out.<br /> <br /> == Undo doesn't work ==<br /> Using FreeCAD 0.13.1828 on Windows. <br /> <br /> * Situation: I draw a box and modify it's size. Then I hit Ctrl+Z (or Redo from the menu).<br /> * What happens: Box is deleted :-(<br /> * Expected: Box returns to old size.<br /> <br /> =OSE FreeCAD Documentation=<br /> <br /> I (Mark Norton) have created a very simply, introductory guide to FreeCAD. It only covers the very basics at this point, but we can expand on it as needed. - [[User:Mjn]]<br /> <br /> [[File:FreeCAD-3.pdf]]<br /> <br /> This document covers the following topics:<br /> <br /> * Views<br /> * Workshops<br /> * Sizing a Primitive Part<br /> * Positioning a Part<br /> * Making a Cut<br /> * Combining Parts<br /> * Rotating a Part<br /> * Extrusion<br /> <br /> See also, FreeCAD Documentation and Tutorials [http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page].<br /> <br /> == Related ==<br /> * [[FreeCAD Survival Guide]]<br /> <br /> =OSE FreeCAD Requirements=<br /> For OSE to use FreeCAD for all of its design needs, these are the functions required. Do these exist? Please comment.<br /> <br /> *Freehand drawing of shapes and extrusion (like Sketchup).[[Image:check.png]]<br /> *Adding parameters to all of the shapes, so they can be modified. [[Image:check.png]]<br /> *Modifying all parameters in 3D parametrically (typing in lengths) [[Image:check.png]]<br /> *Modifying all parameters in 3D with the mouse (such as dragging corners, edges, and faces)<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;This is not possible and will not be in the future. This kind of behavior needs quite advanced back-end functionality which is not provided by our geometric modeling kernel&quot;<br /> <br /> *Adding parameters in 3D parametrically (boolean operations)? [[Image:check.png]]<br /> *Adding parameters in 3D by drawing them and extruding (mouse-based boolean operations)<br /> *Adding parameters to shapes in 3D parametrically (such as drawing in new objects parametrically)?<br /> *Adding parameters to shapes in 3D manually (such as drawing in new objects with a mounse)?<br /> *For multiple objects, moving them with the mouse to arrange, mate, align them.<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;That is not yet possible. The assembly workbench is in a very early design phase and still needs quite some time. That is true for basic functionality and integration into freecad workflows.&quot;<br /> <br /> *Grouping and ungrouping objects into assemblies?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;not yet but will be possible with upcoming assembly workbench&quot;<br /> <br /> *Maintaining parametric nature of grouped objects?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: &quot;not yet, but will be possible with the upcoming assembly workbench&quot;<br /> <br /> Now for interoperability with other CAD packages:<br /> <br /> *Importing multiple new objects into a drawing - one at a time?<br /> <br /> [https://github.com/ickby Response from FreeCAD developer ickby]: 'currently you can only import whole files, not individual objects from a file'<br /> <br /> *Importing multiple objects into a model - all at one time? [[Image:check.png]]<br /> *Importing new objects while passing the parametric values into FreeCAD, such as with a STEP file?<br /> <br /> =Tutorials=<br /> ==Bram De Vries==<br /> Tutorials 1-8:<br /> <br /> &lt;html&gt;&lt;iframe width=&quot;420&quot; height=&quot;315&quot; src=&quot;//www.youtube.com/embed/siqXdX2iwm4&quot; frameborder=&quot;0&quot; allowfullscreen&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> [[Category:CAD]]<br /> [[Category:Digital Fabrication]]<br /> [[Category:Software]]<br /> [[Category:Open Source Software]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120779 2014-06-23T15:29:33Z

<p>Gabriel Kind: </p> <hr /> <div>==June 23==<br /> Added a tut on the [[GIMP]] page <br /> <br /> ==June 20==<br /> *Built silk screen frame and scoop cup<br /> <br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gimp&diff=120778 2014-06-23T15:26:04Z

<p>Gabriel Kind: </p> <hr /> <div>GIMP is the GNU Image Manipulation Program. It is a freely distributed piece of software for such tasks as photo retouching, image composition and image authoring. It works on many operating systems, in many languages. GIMP is often cited as a replacement for Adobe Photoshop<br /> <br /> * http://www.gimp.org/<br /> * http://en.wikipedia.org/wiki/GIMP<br /> <br /> ==Re-sizing Images==<br /> '''Note:''' For this method to work on any Linux distribution, you must install the 'gimp-plugin-registry' package and restart GIMP.<br /> <br /> You may often find the need to resize several images at once in order to work with them on a computer without dedicated graphics, or to upload them at a reasonable speed. To resize many images quickly, open GIMP (no file necessary) and on the Menu Bar select Filters -&gt; Batch -&gt; David's Batch Processor.<br /> <br /> Now add the desired files and select the 're-size' tab. Check the 'enable' box and select the desired ''relative'' size reduction, making sure to keep the same ratio. <br /> <br /> Near the bottom of this window, press the 'start' button.<br /> [[Category:Collaboration]]<br /> [[Category:Software]]<br /> [[Category:Open Source Software]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120774 2014-06-23T14:14:40Z

<p>Gabriel Kind: </p> <hr /> <div>==June 20==<br /> *Built silk screen frame and scoop cup<br /> <br /> <br /> ==June 19==<br /> *Weeded <br /> *Moved supplies from solar house<br /> *Applied a layer of paint to the bottom<br /> <br /> ==June 18==<br /> *Applied two layers of stain to the solar house siding<br /> *Went dumpster diving in St. Joseph for screen printing supplies<br /> <br /> ==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120640 2014-06-18T01:30:44Z

<p>Gabriel Kind: </p> <hr /> <div>==June 17==<br /> *Finished side paneling on the solar house<br /> *Picked up supplies for screen printed shirts<br /> <br /> ==June 16==<br /> *Helped to load van<br /> *Took stock of CEB press pieces<br /> *Fastened side paneling to the sun house<br /> *Picked up food supplies, wood finish, more paneling etc<br /> <br /> ==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120561 2014-06-16T04:38:26Z

<p>Gabriel Kind: </p> <hr /> <div>==June 14==<br /> *Puked and slept<br /> <br /> =June 13==<br /> *Puked and slept<br /> <br /> ==June 12== <br /> *Made changes to grate instructional<br /> *Did research on visual VC and alternative CAD programs and formats<br /> *Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120484 2014-06-13T14:36:03Z

<p>Gabriel Kind: </p> <hr /> <div>==June 12== <br /> Made changes to grate instructional<br /> Did research on visual VC and alternative CAD programs and formats<br /> Built automatic gcode modification into LasersaurApp and explored the code. Thoroughly. <br /> <br /> ==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120456 2014-06-12T15:08:59Z

<p>Gabriel Kind: </p> <hr /> <div>==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM CEB Grate]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120455 2014-06-12T15:07:32Z

<p>Gabriel Kind: </p> <hr /> <div>==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished instructional for the [CEB Grate https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM]<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120452 2014-06-12T14:43:13Z

<p>Gabriel Kind: </p> <hr /> <div>==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend, re-wound the spool and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120448 2014-06-12T14:34:58Z

<p>Gabriel Kind: </p> <hr /> <div>==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer-- flashed the firmware, cleaned the hotend and re-leveled the bed. <br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120447 2014-06-12T14:34:03Z

<p>Gabriel Kind: </p> <hr /> <div>==June 11==<br /> *Created an instructional for the [https://docs.google.com/presentation/d/1fcz4_t0VDfm1RMY2C63SHj6NWFTicd-gledlzG05tok/edit#slide=id.g34f913ef9_15 Grate deflector module]<br /> *Fixed the HyrdaFabber 3D printer by flashing the firmware.<br /> <br /> ==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120399 2014-06-11T14:53:00Z

<p>Gabriel Kind: </p> <hr /> <div>==June 10==<br /> *Worked to level the Ultimaker 3d printer<br /> *Got pronterface working on Linux<br /> *Unpacked pool parts and began to take inventory<br /> *Augmented the pool assembly instructional<br /> <br /> <br /> ==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120366 2014-06-10T17:11:27Z

<p>Gabriel Kind: </p> <hr /> <div>==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Polish youtube raw uploads specifications<br /> *Continue to upload to Trovebox<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa<br /> *Update calender<br /> *NOLS Prereqs</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Grate_Module_-_3D_CAD&diff=120358 2014-06-10T15:35:59Z

<p>Gabriel Kind: Added embedded grate file</p> <hr /> <div>[[File:Grate.fcstd]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=File:Grate.fcstd&diff=120357 2014-06-10T15:35:41Z

<p>Gabriel Kind: </p> <hr /> <div></div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120356 2014-06-10T15:08:24Z

<p>Gabriel Kind: </p> <hr /> <div>==June 9==<br /> *Moved pool parts<br /> *Assisted in torch table configuration<br /> <br /> <br /> ==June 8==<br /> *Penetration test of CNC torch table<br /> *Continued through KiCad Tutorials <br /> *Continued devpage dozuki scraper<br /> <br /> ==June 7==<br /> *Worked through KiCad tutorials <br /> *Documented and assisted power cube dis-assembly <br /> *Built automated web scraper to coalesce devpages<br /> <br /> ==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120302 2014-06-09T16:10:58Z

<p>Gabriel Kind: </p> <hr /> <div>==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode<br /> *Find way of going from FreeCad to Sketchup Vice Versa</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120219 2014-06-07T21:11:40Z

<p>Gabriel Kind: </p> <hr /> <div>==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications<br /> *Push IRC<br /> *Upload CNC Torch table documentation<br /> *Learn KiCode</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120218 2014-06-07T17:38:29Z

<p>Gabriel Kind: </p> <hr /> <div>==June 6==<br /> *Configured wireless access point in FabLab<br /> *Took Video documentation on CNC Torch Table and assisted with testing<br /> *Made a tutorial for using xchat on the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34d2967f1_10 collaboration architecture presentation]<br /> <br /> ==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications<br /> *Push IRC<br /> *Upload CNC Torch table documentation</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Grate_Module_-_Build_Instructions&diff=120190 2014-06-06T18:28:57Z

<p>Gabriel Kind: Added html tags</p> <hr /> <div>&lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Grate_Module_-_Build_Instructions&diff=120189 2014-06-06T18:28:21Z

<p>Gabriel Kind: Created page with &quot;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=...&quot;</p> <hr /> <div>&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120107 2014-06-06T03:53:54Z

<p>Gabriel Kind: </p> <hr /> <div>==June 5==<br /> *Configured two routers in hablab [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board]<br /> *Began work on consolidating work logs<br /> *Began refinement of Torch cutter goals and documentation of recent development [http://opensourceecology.org/wiki/CNC_Torch-Router_Table_2_Overall_Module_Development_Board here]<br /> <br /> ==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120102 2014-06-05T22:32:29Z

<p>Gabriel Kind: </p> <hr /> <div>==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications<br /> *List wiki dev pages</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120050 2014-06-05T04:25:45Z

<p>Gabriel Kind: </p> <hr /> <div>==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> *Installed new internet connection from the mud huts (Nope, broken again, will fix tomorrow)<br /> *Implanted gcode into the torch table for testing purposes.<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=120044 2014-06-04T18:41:33Z

<p>Gabriel Kind: </p> <hr /> <div>==June 4==<br /> *Finished Grate instructional for the CEB &lt;html&gt;&lt;iframe src=&quot;https://docs.google.com/presentation/d/1V5zQif5GMfydl2p3LVO-s_WBr8nLeWkq6JpC0VZq2HM/embed?start=false&amp;loop=false&amp;delayms=3000&quot; frameborder=&quot;0&quot; width=&quot;960&quot; height=&quot;569&quot; allowfullscreen=&quot;true&quot; mozallowfullscreen=&quot;true&quot; webkitallowfullscreen=&quot;true&quot;&gt;&lt;/iframe&gt;&lt;/html&gt;<br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> <br /> <br /> ==Ongoing todo list==<br /> *Further research buried cat5 line<br /> *Finding a method to implant a gcode file to be used by lasersaur<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119973 2014-06-04T04:04:51Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> ==June 3==<br /> *Organized power tool and began to label shelves and drawers<br /> *Began construction and time lapse of Liberator<br /> *Found potential solutions to implanting a modified gcode file manually to the torchtable <br /> *Researched burying a cat5 cable ([https://docs.google.com/document/d/1cfEOvZPWO7bMrWvWkcOIvMZUyxsHrKu7Y1h8SmbrQMQ/edit notes])<br /> <br /> <br /> ==Ongoing todo list==<br /> *Further research buried cat5 line<br /> *Finding a method to implant a gcode file to be used by lasersaur<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119876 2014-06-03T03:48:28Z

<p>Gabriel Kind: /* Ongoing todo list */</p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> <br /> ==Ongoing todo list==<br /> *Further research buried cat5 line<br /> *Finding a method to implant a gcode file to be used by lasersaur<br /> *Continue to compress and upload my footage to youtube<br /> *Polish youtube raw uploads specifications<br /> *Gauge interest in youtube instructional specifications?</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119875 2014-06-03T03:41:05Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04<br /> *Recorded and participated in Liberator deconstruction time lapse<br /> *Assisted in Ubuntu installations<br /> *Recorded extension cord salvation<br /> *Planted tomatoes and soy <br /> <br /> <br /> ==Ongoing todo list==<br /> *Further research buried cat5 line<br /> *Finding a method to implant a gcode file to be used by lasersaur<br /> *Continue to compress and upload my footage to youtube</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119852 2014-06-02T19:11:19Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> ==June 2==<br /> *Augmented the [https://docs.google.com/presentation/d/13NnAE6fGz_hntIUInrpmHCUiGL3b35i4mdiDerdIpeY/edit#slide=id.g34901d8e7_202 Collaboration Architecture slideshow] to include instructions about installing SketchUp on Ubuntu 12.04</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119818 2014-06-02T14:22:53Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]<br /> ==June 2==</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119812 2014-06-02T14:19:19Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit youtube raw media upload standards]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119806 2014-06-02T14:15:54Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for [[youtube raw media upload standards https://docs.google.com/document/d/1-MoVTiwlvPJqA29nDRo9PshSeQs5csJaNteU92LwJg4/edit]]</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119805 2014-06-02T14:14:58Z

<p>Gabriel Kind: </p> <hr /> <div>==June 1==<br /> *Constructed a proposal for youtube raw media upload standards</div>

Gabriel Kind https://wiki.opensourceecology.org/index.php?title=Gabriel_Kind_log&diff=119768 2014-06-01T04:06:01Z

<p>Gabriel Kind: Created page with &quot;==June 1==&quot;</p> <hr /> <div>==June 1==</div>

Gabriel Kind