Open Source Ecology - User contributions [en]

Talk:Upvote Here

2025-09-20T13:18:35Z

JET OOTO:

I was prototyping a project management app here: https://fabulous-baklava-37c8b5.netlify.app/

Adding an upvote functionality or building out something new wouldn't take too much effort. The app is unfinished and would need a backend built to support the data. Let me know if this is something you feel would be useful or if you feel something else would be helpful.

There are also some other existing websites for this but of course cost money/are not open source.

Talk:Upvote Here

2025-09-20T13:14:19Z

JET OOTO: Created page with "I was prototyping a project management app here: https://fabulous-baklava-37c8b5.netlify.app/ Adding an upvote functionality or building out something new wouldn't take too much effort. The app is unfinished and would need a backend built to support the data. Let me know if this is something you feel would be useful or if you feel something else would be helpful."

JET LOG

2025-06-26T01:19:32Z

JET OOTO: /* June 25th, 2025 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Joshua?start=9/1/2019"></iframe></html>

= Highlights =
*[[Initial Assessment JET]]
*[[OSE Software Stack]]
*[[HeroX Challenge Research]]
*[[Intentional Communities]]

= June 2025 =
== June 25th, 2025 ==
* Started building Project Management prototype app. Right now, I'm creating a prototype and refining the UI. The back-end can come later if this software is something that is desired. This will be an open source project(Will deal with license formalities in the future if there is a real release.). This can also integrate with the Wiki(Many ways to do this, easiest is probably to just automatically create a post/page edit on form submission from the app.)
** Application has been deployed here: https://fabulous-baklava-37c8b5.netlify.app/
** Keep in mind that this is Front-End only. No backend, no auth/security, no input validation, etc. Ideally, I'm thinking micro-frontend application which would be decentralized. The contributions would be written to and stored in a centralized database. Also, a transaction log can be stored locally on the PC and synced to the central DB(s) in various intervals. API's can be built to integrate with other systems.

* Posted about the thoughts around a Hackathon to coincide with the apprenticeship kickoff. Post below:
"What do people here think about kicking off a hackathon at the same time the Apprenticeship kicks off?"
It would engage the larger community and allow for people to collaborate remotely while the on-site builds are going on. This would increase visibility for OSE and some cool stuff could come from it.
Having both events running in parallel I feel would have good synergy and create a more impactful "launch". (Considering the branding updates as well.)

=== Risks ===
Logistically, this would be a lot of work. I think that others here would need to run with it since Marcin would be busy with running things on-site.,
In addition to the logistics, it would be necessary to run advertisements, cross-post and generate interest. (I'm up for all of the above if it seems like a good idea)

== June 3rd, 2025 ==
* Been awhile since I've logged in, but found my credentials in my DB. I've been engaging with the content more so I will try to help where I can.

= August 2021 =
== August 24, 2021 ==
* Rebuilt Extruder Head
** Bearing loose, rotor came off needed to reattach
* Babystepped Z Axis to get better alignment to build plate
* Dual end stops?
** Mechanical vs Optical vs Magnetic

== August 22, 2021 ==
* Y axis working again after filing down heated bed carriage piece. Belt was grinding against rough edges inside.
* Thinking about printer build ergonomics
* Y end stop doesn't remain in place, need to continually readjust but works otherwise.
* Printer lowers down too far when printing and nozzle crashes into print bed. Z offset has been adjusted per Ken's recommendation but still not able to get good prints.
** Switched to positive end and printer is far enough away to print. Need to refine.
* Filament leaks through nozzle even when Extruder is not engaged. Possibly need to replace the nozzle.
* Will switch one Z axis rod as the other previously swapped out was too short but now this one is too long and I cannot attach Spool Holder.
* Extruder wires seem to be reversed. The causes the printer to send out filament rather than take it in during print.
** Extruder behavior corrected by swapping wires.
* Need to adjust X/Y axis offsets. Printer prints off of the bed.

= July 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== July 10, 2021 ==
* Look into feasibility of moving into FreeCAD 19
** Need to updated instructionals
* Standing up project management infrastructure
== July 3, 2021 ==
* HeroX Challenge Collaboration
* Business Case Study
== To Do ==
* Look into possible media wiki extension for tracking hours log
* Send requested materials to access Dev VPN

== July 2, 2021 ==
* Began building Eco-home modules
* Design Lessons

== July 1, 2021 ==
* Began apprenticeship, clearing workshop and design lessons
</div>
= June 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
==Thu Jun 24, 2021 ==
* Filled out Apprenticeship Survey
* Updated Intentional Communities Page
==Fri June 18, 2021==
* Fider is up and working after learning more about Docker.
** Need to finish setting up mail server and purging DB instance before testing.
* Shipping Tools/Equipment/QoL Items to site
* Researching viability of moving certain workloads to containerized environment
* Working on Assessment form
==Thu June 10, 2021==
* Built out Fider app in OOTO Cloud
** Need to troubleshoot configuration with Docker
** Do not use Ubuntu Snap-In's with Docker.
== Wed June 2, 2021==
* Fider Upvoting App Test Build
</div>

= May 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== Sat May 29, 2021 ==
* Build Test Servers
* Discuss IT Solutions
* Completing Initial Assessment

== Thu May 27, 2021 ==
*OnlyOffice/NextCloud Integration
*Completing Apprenticeship Forms
*Creating/Completing Initial Assessment

== Wed May 26, 2021 ==
* Building/Configuring OnlyOffice Server
* Reviewing Videos/Eco-Home Build Cheatsheets

== Tue May 25, 2021 ==
* Building/Configuring NextCloud Server

== Mon May 24, 2021 ==
* Added wall module 16 to build cheatsheet

== Sun May 23, 2021 ==
* Seed Eco-Home 2 Design Sprint
* Updated [[OSE Software Stack]]

== Thu May 20, 2021 ==
* Creation of this work log
* Attended Sustainable Buildings Webinar held by LoraWAN - Need to review materials
* Familiarizing myself with wiki page
* Submission of qualification video for FreeCAD OSE Badge
<html>
<iframe width="794" height="447" src="https://www.youtube.com/embed/Iqd_Klnspu8" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
</html>
</div>

JET LOG

2025-06-25T19:03:55Z

JET OOTO: /* June 25th, 2025 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Joshua?start=9/1/2019"></iframe></html>

= Highlights =
*[[Initial Assessment JET]]
*[[OSE Software Stack]]
*[[HeroX Challenge Research]]
*[[Intentional Communities]]

= June 2025 =
== June 25th, 2025 ==
* Started building Project Management prototype app. Right now, I'm creating a prototype and refining the UI. The back-end can come later if this software is something that is desired. This will be an open source project(Will deal with license formalities in the future if there is a real release.). This can also integrate with the Wiki(Many ways to do this, easiest is probably to just automatically create a post/page edit on form submission from the app.)

* Posted about the thoughts around a Hackathon to coincide with the apprenticeship kickoff. Post below:
"What do people here think about kicking off a hackathon at the same time the Apprenticeship kicks off?"
It would engage the larger community and allow for people to collaborate remotely while the on-site builds are going on. This would increase visibility for OSE and some cool stuff could come from it.
Having both events running in parallel I feel would have good synergy and create a more impactful "launch". (Considering the branding updates as well.)

=== Risks ===
Logistically, this would be a lot of work. I think that others here would need to run with it since Marcin would be busy with running things on-site.,
In addition to the logistics, it would be necessary to run advertisements, cross-post and generate interest. (I'm up for all of the above if it seems like a good idea)

== June 3rd, 2025 ==
* Been awhile since I've logged in, but found my credentials in my DB. I've been engaging with the content more so I will try to help where I can.

= August 2021 =
== August 24, 2021 ==
* Rebuilt Extruder Head
** Bearing loose, rotor came off needed to reattach
* Babystepped Z Axis to get better alignment to build plate
* Dual end stops?
** Mechanical vs Optical vs Magnetic

== August 22, 2021 ==
* Y axis working again after filing down heated bed carriage piece. Belt was grinding against rough edges inside.
* Thinking about printer build ergonomics
* Y end stop doesn't remain in place, need to continually readjust but works otherwise.
* Printer lowers down too far when printing and nozzle crashes into print bed. Z offset has been adjusted per Ken's recommendation but still not able to get good prints.
** Switched to positive end and printer is far enough away to print. Need to refine.
* Filament leaks through nozzle even when Extruder is not engaged. Possibly need to replace the nozzle.
* Will switch one Z axis rod as the other previously swapped out was too short but now this one is too long and I cannot attach Spool Holder.
* Extruder wires seem to be reversed. The causes the printer to send out filament rather than take it in during print.
** Extruder behavior corrected by swapping wires.
* Need to adjust X/Y axis offsets. Printer prints off of the bed.

= July 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== July 10, 2021 ==
* Look into feasibility of moving into FreeCAD 19
** Need to updated instructionals
* Standing up project management infrastructure
== July 3, 2021 ==
* HeroX Challenge Collaboration
* Business Case Study
== To Do ==
* Look into possible media wiki extension for tracking hours log
* Send requested materials to access Dev VPN

== July 2, 2021 ==
* Began building Eco-home modules
* Design Lessons

== July 1, 2021 ==
* Began apprenticeship, clearing workshop and design lessons
</div>
= June 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
==Thu Jun 24, 2021 ==
* Filled out Apprenticeship Survey
* Updated Intentional Communities Page
==Fri June 18, 2021==
* Fider is up and working after learning more about Docker.
** Need to finish setting up mail server and purging DB instance before testing.
* Shipping Tools/Equipment/QoL Items to site
* Researching viability of moving certain workloads to containerized environment
* Working on Assessment form
==Thu June 10, 2021==
* Built out Fider app in OOTO Cloud
** Need to troubleshoot configuration with Docker
** Do not use Ubuntu Snap-In's with Docker.
== Wed June 2, 2021==
* Fider Upvoting App Test Build
</div>

= May 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== Sat May 29, 2021 ==
* Build Test Servers
* Discuss IT Solutions
* Completing Initial Assessment

== Thu May 27, 2021 ==
*OnlyOffice/NextCloud Integration
*Completing Apprenticeship Forms
*Creating/Completing Initial Assessment

== Wed May 26, 2021 ==
* Building/Configuring OnlyOffice Server
* Reviewing Videos/Eco-Home Build Cheatsheets

== Tue May 25, 2021 ==
* Building/Configuring NextCloud Server

== Mon May 24, 2021 ==
* Added wall module 16 to build cheatsheet

== Sun May 23, 2021 ==
* Seed Eco-Home 2 Design Sprint
* Updated [[OSE Software Stack]]

== Thu May 20, 2021 ==
* Creation of this work log
* Attended Sustainable Buildings Webinar held by LoraWAN - Need to review materials
* Familiarizing myself with wiki page
* Submission of qualification video for FreeCAD OSE Badge
<html>
<iframe width="794" height="447" src="https://www.youtube.com/embed/Iqd_Klnspu8" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
</html>
</div>

JET LOG

2025-06-25T19:03:02Z

JET OOTO: /* June 25th, 2025 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Joshua?start=9/1/2019"></iframe></html>

= Highlights =
*[[Initial Assessment JET]]
*[[OSE Software Stack]]
*[[HeroX Challenge Research]]
*[[Intentional Communities]]

= June 2025 =
== June 25th, 2025 ==
* Started building Project Management prototype app. Right now, I'm creating a prototype and refining the UI. The back-end can come later if this software is something that is desired. This will be an open source project(Will deal with license formalities in the future if there is a real release.). This can also integrate with the Wiki(Many ways to do this, easiest is probably to just automatically create a post/page edit on form submission from the app.)

* Posted about the thoughts around a Hackathon to coincide with the apprenticeship kickoff. Post below:

"What do people here think about kicking off a hackathon at the same time the Apprenticeship kicks off?"

It would engage the larger community and allow for people to collaborate remotely while the on-site builds are going on.,
This would increase visibility for OSE and some cool stuff could come from it.,
Having both events running in parallel I feel would have good synergy and create a more impactful "launch". (Considering the branding updates as well.),

=== Risks ===
Logistically, this would be a lot of work. I think that others here would need to run with it since Marcin would be busy with running things on-site.,
In addition to the logistics, it would be necessary to run advertisements, cross-post and generate interest. (I'm up for all of the above if it seems like a good idea)

== June 3rd, 2025 ==
* Been awhile since I've logged in, but found my credentials in my DB. I've been engaging with the content more so I will try to help where I can.

= August 2021 =
== August 24, 2021 ==
* Rebuilt Extruder Head
** Bearing loose, rotor came off needed to reattach
* Babystepped Z Axis to get better alignment to build plate
* Dual end stops?
** Mechanical vs Optical vs Magnetic

== August 22, 2021 ==
* Y axis working again after filing down heated bed carriage piece. Belt was grinding against rough edges inside.
* Thinking about printer build ergonomics
* Y end stop doesn't remain in place, need to continually readjust but works otherwise.
* Printer lowers down too far when printing and nozzle crashes into print bed. Z offset has been adjusted per Ken's recommendation but still not able to get good prints.
** Switched to positive end and printer is far enough away to print. Need to refine.
* Filament leaks through nozzle even when Extruder is not engaged. Possibly need to replace the nozzle.
* Will switch one Z axis rod as the other previously swapped out was too short but now this one is too long and I cannot attach Spool Holder.
* Extruder wires seem to be reversed. The causes the printer to send out filament rather than take it in during print.
** Extruder behavior corrected by swapping wires.
* Need to adjust X/Y axis offsets. Printer prints off of the bed.

= July 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== July 10, 2021 ==
* Look into feasibility of moving into FreeCAD 19
** Need to updated instructionals
* Standing up project management infrastructure
== July 3, 2021 ==
* HeroX Challenge Collaboration
* Business Case Study
== To Do ==
* Look into possible media wiki extension for tracking hours log
* Send requested materials to access Dev VPN

== July 2, 2021 ==
* Began building Eco-home modules
* Design Lessons

== July 1, 2021 ==
* Began apprenticeship, clearing workshop and design lessons
</div>
= June 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
==Thu Jun 24, 2021 ==
* Filled out Apprenticeship Survey
* Updated Intentional Communities Page
==Fri June 18, 2021==
* Fider is up and working after learning more about Docker.
** Need to finish setting up mail server and purging DB instance before testing.
* Shipping Tools/Equipment/QoL Items to site
* Researching viability of moving certain workloads to containerized environment
* Working on Assessment form
==Thu June 10, 2021==
* Built out Fider app in OOTO Cloud
** Need to troubleshoot configuration with Docker
** Do not use Ubuntu Snap-In's with Docker.
== Wed June 2, 2021==
* Fider Upvoting App Test Build
</div>

= May 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== Sat May 29, 2021 ==
* Build Test Servers
* Discuss IT Solutions
* Completing Initial Assessment

== Thu May 27, 2021 ==
*OnlyOffice/NextCloud Integration
*Completing Apprenticeship Forms
*Creating/Completing Initial Assessment

== Wed May 26, 2021 ==
* Building/Configuring OnlyOffice Server
* Reviewing Videos/Eco-Home Build Cheatsheets

== Tue May 25, 2021 ==
* Building/Configuring NextCloud Server

== Mon May 24, 2021 ==
* Added wall module 16 to build cheatsheet

== Sun May 23, 2021 ==
* Seed Eco-Home 2 Design Sprint
* Updated [[OSE Software Stack]]

== Thu May 20, 2021 ==
* Creation of this work log
* Attended Sustainable Buildings Webinar held by LoraWAN - Need to review materials
* Familiarizing myself with wiki page
* Submission of qualification video for FreeCAD OSE Badge
<html>
<iframe width="794" height="447" src="https://www.youtube.com/embed/Iqd_Klnspu8" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
</html>
</div>

JET LOG

2025-06-25T19:00:23Z

JET OOTO: /* June 2025 */

<html><iframe width="600" height="500" src="https://osedev.org/wiki/Joshua?start=9/1/2019"></iframe></html>

= Highlights =
*[[Initial Assessment JET]]
*[[OSE Software Stack]]
*[[HeroX Challenge Research]]
*[[Intentional Communities]]

= June 2025 =
== June 25th, 2025 ==
* Started building Project Management prototype app. Right now, I'm creating a prototype and refining the UI. The back-end can come later if this software is something that is desired. This will be an open source project(Will deal with license formalities in the future if there is a real release.). This can also integrate with the Wiki(Many ways to do this, easiest is probably to just automatically create a post/page edit on form submission from the app.)

== June 3rd, 2025 ==
* Been awhile since I've logged in, but found my credentials in my DB. I've been engaging with the content more so I will try to help where I can.

= August 2021 =
== August 24, 2021 ==
* Rebuilt Extruder Head
** Bearing loose, rotor came off needed to reattach
* Babystepped Z Axis to get better alignment to build plate
* Dual end stops?
** Mechanical vs Optical vs Magnetic

== August 22, 2021 ==
* Y axis working again after filing down heated bed carriage piece. Belt was grinding against rough edges inside.
* Thinking about printer build ergonomics
* Y end stop doesn't remain in place, need to continually readjust but works otherwise.
* Printer lowers down too far when printing and nozzle crashes into print bed. Z offset has been adjusted per Ken's recommendation but still not able to get good prints.
** Switched to positive end and printer is far enough away to print. Need to refine.
* Filament leaks through nozzle even when Extruder is not engaged. Possibly need to replace the nozzle.
* Will switch one Z axis rod as the other previously swapped out was too short but now this one is too long and I cannot attach Spool Holder.
* Extruder wires seem to be reversed. The causes the printer to send out filament rather than take it in during print.
** Extruder behavior corrected by swapping wires.
* Need to adjust X/Y axis offsets. Printer prints off of the bed.

= July 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== July 10, 2021 ==
* Look into feasibility of moving into FreeCAD 19
** Need to updated instructionals
* Standing up project management infrastructure
== July 3, 2021 ==
* HeroX Challenge Collaboration
* Business Case Study
== To Do ==
* Look into possible media wiki extension for tracking hours log
* Send requested materials to access Dev VPN

== July 2, 2021 ==
* Began building Eco-home modules
* Design Lessons

== July 1, 2021 ==
* Began apprenticeship, clearing workshop and design lessons
</div>
= June 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
==Thu Jun 24, 2021 ==
* Filled out Apprenticeship Survey
* Updated Intentional Communities Page
==Fri June 18, 2021==
* Fider is up and working after learning more about Docker.
** Need to finish setting up mail server and purging DB instance before testing.
* Shipping Tools/Equipment/QoL Items to site
* Researching viability of moving certain workloads to containerized environment
* Working on Assessment form
==Thu June 10, 2021==
* Built out Fider app in OOTO Cloud
** Need to troubleshoot configuration with Docker
** Do not use Ubuntu Snap-In's with Docker.
== Wed June 2, 2021==
* Fider Upvoting App Test Build
</div>

= May 2021 =
<div class="mw-collapsible" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">
== Sat May 29, 2021 ==
* Build Test Servers
* Discuss IT Solutions
* Completing Initial Assessment

== Thu May 27, 2021 ==
*OnlyOffice/NextCloud Integration
*Completing Apprenticeship Forms
*Creating/Completing Initial Assessment

== Wed May 26, 2021 ==
* Building/Configuring OnlyOffice Server
* Reviewing Videos/Eco-Home Build Cheatsheets

== Tue May 25, 2021 ==
* Building/Configuring NextCloud Server

== Mon May 24, 2021 ==
* Added wall module 16 to build cheatsheet

== Sun May 23, 2021 ==
* Seed Eco-Home 2 Design Sprint
* Updated [[OSE Software Stack]]

== Thu May 20, 2021 ==
* Creation of this work log
* Attended Sustainable Buildings Webinar held by LoraWAN - Need to review materials
* Familiarizing myself with wiki page
* Submission of qualification video for FreeCAD OSE Badge
<html>
<iframe width="794" height="447" src="https://www.youtube.com/embed/Iqd_Klnspu8" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
</html>
</div>

Talk:OSE Social Media

2025-06-25T18:52:52Z

JET OOTO: Created page with "* An application to manage the various social media/schedule posts etc could be useful here. Hootsuite is a common application but its not free or open source. There are plent..."

* An application to manage the various social media/schedule posts etc could be useful here. Hootsuite is a common application but its not free or open source. There are plenty of opportunities to create custom software and I believe that will be the way of the future given the direction we are headed now.

Talk:Polyethylene to Gasoline and Diesel

2025-06-23T02:21:42Z

JET OOTO: Created page with "* This is an interesting idea. There is someone who I've been following for a while that has built a machine to process waste plastic and turn it into fuel (Gas/Diesel). * It..."

* This is an interesting idea. There is someone who I've been following for a while that has built a machine to process waste plastic and turn it into fuel (Gas/Diesel).

* It may be worthwhile to collaborate with this individual, he's been making waves with his work.
** Naturejab: https://www.naturejab.com/faq / https://www.youtube.com/@naturejab
** (Citations used) Research Paper on Pyrolysis: https://www.intechopen.com/chapters/17015

Collaborative FreeCAD Platform

2025-06-08T16:38:40Z

JET OOTO: Created page with "== Overview == * [https://blog.freecad.org/2025/05/19/lens-platform-now-available-collaborate-with-freecad-online/] FreeCAD project association foundation has worked to make t..."

== Overview ==
* [https://blog.freecad.org/2025/05/19/lens-platform-now-available-collaborate-with-freecad-online/] FreeCAD project association foundation has worked to make the Ondsel Lens platform freely available.The installation is hosted on Github: [https://github.com/FreeCAD/Ondsel-Server]. This essentially acts as a repository for CAD models and features online collaborative tools.

== Initial Observations ==
* The tool is a work in progress. It's still under active development but it is functional. I was able to get the server up and tested in about 10 minutes following the Github. It would definitely be worthwhile to actively watch/contribute to this project to get in features that would be valuable.
* Interacting with the models on the server was actually really nice! The interface is snappy and you can easily create new thumbnails of models. You can export models into whichever format you need.
* There are various methods in which you can host this. There is a pre-built .env template built for AWS but someone could create their own to work with any cloud host or local server.
* You can share public links to models or keep some private if necessary. There is the ability to create various workspaces as well.
* Looks like the project stack is built on Feathers(Have not encountered this framework myself...) [[https://feathersjs.com/]] Interesting framework, used specifically for real-time web applications.
* An Ondsel Lens plugin is already available for FreeCAD(I'm using v1.0.1). I need to test this out with the Ondsel test server but I have not been able to connect to the local instance. Have to investigate a bit more.

== Potential Features ==
* It would be nice to have the ability to leave comments/discussions on models. This could be implemented without too much effort I believe.
* Taking this a step further, it would be nice to have multiple users working on one CAD model live (similar interface to Penpot: [[https://penpot.app/]]) with constraints as to who is "driving" the collaboration.

Talk:OSE Communications Strategy

2025-06-06T21:08:38Z

JET OOTO:

AI also has some other issues. I’m not going to get all bent out of shape over the occasional using of it etc, but as a widespread strategy that may be i’ll advised.

I’ll ask around on the discord a bit on if we have any 2D Art Skilled Types (Granted time investment, but more OS Content would probably be useful for more than just that one time, so it wouldn’t be a waste!)

I could probably do Thumbnail Edits and stuff like that if i started doing OSE work full time if noone else is on that (I THINK you already have a video editor, so if they got it/are already up to speed on an os workflow they are probably a better fit than me, but that is a muscle i would just need to get back in shape so to speak)

It’s probably worth it’s own page, but here’s a good video on [[The Ethics of Using Generative AI for Content Creation]

[https://youtu.be/5sFBySzNIX0?si=IZlbJDNiCI8EB2TB A Video by the YouTube Channel “[[Simon Clark]]” Titled “Should I Feel Guilty Using AI” ] ( ‘’’~35 Minute Watch’’’ ) (ALTHOUGH the first half (as he points out for transparency sake) is largely in his area of expertise, Climate Research [[LCAs]] etc), while the second half is largely a personal take/ [[Editorializing]] from the perspective of a Creative / Content Creator (when much of the Training Data was sourced via YouTube videos or Art irrespective of the creator’s wishes etc)

--[[User:Eric|Eric]] ([[User talk:Eric|talk]]) 18:33, 6 June 2025 (UTC)

* I tend to agree with Eric about the ethical implications of using AI to generate art... I don't have a fully fleshed out opinion because I do use AI to ''help me'' brainstorm and write code. Where/how do you draw the line? I don't think approaching this with a rigid attitude is the right. A possible solution could be to take already open-source/creative commons assets and train a model to specifically use that "corpus". Then you could have something that could generate assets without the ethical grey area. New assets created for OSE by humans could be used to continue fine-tuning the model.

* There are plenty of forum applications/software applications that could serve the purpose of a dedicated are for longer-form, discussion based dialogue. Think Discourse(I know of the history with them...) or Forem[https://forem.com/] One of the larger implications of AI is that it can empower individuals or organizations to build their own "for purpose", custom software with less human effort and a smaller team. Any license can be applied to the finished software product.

* There is some exciting news from the FreeCAD blog here: [https://blog.freecad.org/2025/05/19/lens-platform-now-available-collaborate-with-freecad-online/] There is an online, collaborative version in the works as of mid-May. I want to check it out this weekend and see if I can get a version of it running on my server. I also want to look more into how I can support the open-source software as well generally. I'm not sure about the Mechatronics/EE side of things so I'll have to check around.

Server Scalability

2025-06-03T19:46:04Z

JET OOTO:

6/3/25
JET: Its an interesting concept! I think an adaptation of the AT Protocol is possible for this: https://docs.bsky.app/docs/advanced-guides/federation-architecture
* Implementing something like this is pretty ambitious and you would need some (a team) high-level software/cloud engineers to work through this. I'll see if I can come up with a concept/design. At the very least from what I'm reading, OSE is relying more on docker/containerization so you can host your own registry for containers which would act like a packaged server someone could deploy given they have hosting and knowledge of docker. It would be nice to complete the federation process automatically when ever a new container/node comes up online.
6/2/25

I think we can evolve an amazing scaling strategy the way we are going now. If we succeed at true modularity and portability of wiki etc - we can do what Amazon does: spin up more capacity on demand. We can do this ina distributed way if other people can readily clone and sync additional secure servers at times of peak demand, such as swarm design where thousands are participating actively. What do you think it would take to do that?

JET LOG

2025-06-03T19:34:52Z

JET OOTO: /* June 2025 */

JET LOG

2025-06-03T19:34:40Z

JET OOTO:

User:JET OOTO

2025-06-03T19:30:39Z

JET OOTO: /* Skills */

* Work Log [[JET LOG]]

== Bio ==
I grew up playing sports and generally lived a normal childhood. I always had an interest in the sciences and technology. I wasn't the best academic but I was always able to learn quite well on my own. Throughout my education, the "why" always seemed to be missing or left out. When my family bought our first computer, I became the computer repair and maintenance person.
Generally, my continued experience with computers led me to the path which I'm on today. I finished 3 years of University working toward my BA in Computer Science before I dropped out. From there I worked a series off jobs that were in the IT industry until I was able to begin working in the Telecommunications and Contact Center sector.
Since then, I've become more skeptical and conscious of the illogical and wasteful way myself and other live feeding a system that will eventually throw us out once we are used up. This led me to found my company with the intention of bettering the system we live with and empower others to do the same.
I find myself to be a generalizing specialist. I have many interests, many things I have researched or have dabbled in and other skills which I feel are excellent.

== Skills ==
* Web/Software Development
* Server Administration/Infrastructure/Cloud Computing
* Database Administration/Design
* IT Networking/Security
* Technical Documentation
* Data Analytics/Machine Learning/AI

== Interests ==
* Electrical Engineering
* Political/Economic Reform
* Philosophy
* Herbal Science/Herbalism
* Fitness/Nutrition
* Sustainable/Regenerative Communities
* Agriculture/Ecology/Smart Gardening
* Data Science

== Accolades ==
[[File:Joshuathomas.png|175px]]

JET LOG

2021-08-24T17:40:48Z

JET OOTO: /* August 2021 */

JET LOG

2021-08-22T20:15:29Z

JET OOTO:

JET LOG

2021-08-22T20:08:31Z

JET OOTO: /* August 22, 2021 */

JET LOG

2021-08-22T19:34:05Z

JET OOTO: /* August 2021 */

120V heater pad

2021-08-15T22:40:51Z

JET OOTO: /* Data Collection */

=Intro=
This page explored 120V ac heaters. Natural choices are heater pads, but these are expensive and custom items. So we made our own nichrome heaters, which have the advantage of complete flexibility for power and size. They are time-consuming to wind without a winding jig.

The nichrome DIY heater element works, but the connection from nichrome to wire is difficult as it goes from copper to steel and there is galvanic corrosion. Further, we run the heater at high temp for fast heat - so we have had the nichrome elements burn out regularly. Solutions are to run the nichrome at about 600 C max, well under its 1000C rating. Another great solution - which turns out to heat faster because it doesn't require insolation over the heater element - is a '''halogen light bulb.'''

Halogen bulbs get hot - several hundred C - and radiate about 90% of their energy as heat. Thus, they are fast, effective heaters, and becuase no insulation is used over them, they can heat the 3D printer heat bed rapidly.

=Pad=
*Amazon $20 - [https://www.amazon.com/ABN-Automotive-Electric-Silicone-Heating/dp/B077J5DSFJ/ref=asc_df_B077J5DSFJ/?tag=hyprod-20&linkCode=df0&hvadid=312031442103&hvpos=&hvnetw=g&hvrand=13027920132478338280&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023315&hvtargid=pla-570219306603&th=1]
*Ebay $15 in 4 quantity - [https://www.ebay.com/itm/Lot-of-4-Ogden-SR2396-Heater-Pad-Heat-Blanket-5-x-3-75w-120v-3-6/303829931742?hash=item46bdacd6de:g:B8IAAOSwMvxf7J99]
*$13 from China - [https://www.ebay.com/itm/1X-110V-120W-Car-Engine-Oil-Pan-Sump-Tank-Heater-Electric-Heating-Pad-Waterproof/264521741585?_trkparms=aid%3D555023%26algo%3DHOMESPLICE.SIMRVI%26ao%3D1%26asc%3D20190711100440%26meid%3D767aeb9f742245949bfd339a9e73319f%26pid%3D100752%26rk%3D6%26rkt%3D24%26mehot%3Dco%26sd%3D174389277908%26itm%3D264521741585%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5hPointwiseWebNoToraCoCoViewsNoHighIdfOrRoundRobinBlenderWithPromotedViewItems%26brand%3DUnbranded&_trksid=p2047675.c100752.m1982]
=Resistors=
*Use resistors instead - [https://www.amazon.com/Comidox-Aluminum-Housed-Wirewound-Resistor/dp/B077ZMFZM6/ref=pd_day0_5?pd_rd_w=brR5a&pf_rd_p=8ca997d7-1ea0-4c8f-9e14-a6d756b83e30&pf_rd_r=VPEJTHZFVZXVQ2EWWQCJ&pd_rd_r=e16787c6-4434-41fa-9a66-1f5afd1efdc2&pd_rd_wg=46kDA&pd_rd_i=B077ZHWLWG&th=1]

=Halogen As Heater=
*Halogens are about 85% heaters.
*For 3D printers, use a 240V bulb, run it at 1/4 power with 120V (P~I^2R) so it doesn't burn out with on-off cycling - by running it only at a fraction of its rated power.
*Use a holder - 4.69 or 4-11/16" holder, for a 240V T3 bulb. [https://www.amazon.com/Lamp-H-PC-63418/dp/B008UW8FA2/ref=asc_df_B008UW8FA2/?tag=hyprod-20&linkCode=df0&hvadid=194952682001&hvpos=&hvnetw=g&hvrand=1972518797233664809&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023315&hvtargid=pla-315248704551&psc=1]
*R7S is the style of holder -[https://www.amazon.com/Magic-shell-Ceramics-Conveter-Connector/dp/B084ZPL73Z/ref=asc_df_B084ZPL73Z/?tag=hyprod-20&linkCode=df0&hvadid=416645302761&hvpos=&hvnetw=g&hvrand=1972518797233664809&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023315&hvtargid=pla-899101640583&psc=1&tag=&ref=&adgrpid=95471652658&hvpone=&hvptwo=&hvadid=416645302761&hvpos=&hvnetw=g&hvrand=1972518797233664809&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023315&hvtargid=pla-899101640583]
*'''500W 240V''' - This bulb is T3 R7S, 118 mm long - [https://www.bulbs.com/product/Q500T3-CL-240V]
*1500/375W 240/120v - [https://www.amazon.com/GE-Lighting-24932-Proline-1500-Watt/dp/B000C13XI8/ref=sr_1_12?dchild=1&keywords=240V%2Bhalogen%2Bbulb&qid=1615771059&s=hi&sr=1-12&th=1]. Overpowered but may be just perfect - $3/each - advantage that only 1 needs to be used.
*Ideally - want 1000W 240V T3 R7S 118 mm for 250W with single bulb?
==Use 2 120V 500W in series, more even bed heating, using 2 bulb holders==
*Bulb source: [https://www.amazon.com/gp/product/B07B2HNB1C/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1]
*Full description of build is posted under the YouTube video - go to [https://www.youtube.com/watch?v=TH2Bgi7SXSY YouTube] to see it

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/TH2Bgi7SXSY" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

==Instructions==
To build the halogen heater, take 2 118 mm halogen holders, and solder them in series. SOlder them to the 200C wire that would otherwise attach to the nichrome heater element. Since the wiring is no longer hot, solder will not melt at the connection - making the halogen heater actually much more robust and easier to build.

After you are done soldering insert the heaters inside the heat bed, facing away from each other with the wires inside, so that the heaters are facing the 1/2" conduit sides of the heater bed. This way, the wires are not being heated.

The halogen holders should be parallel to the 5-1/4" lenght of the conduit.

Use the carbon fiber blanket on the bottom for insulation.

Screw the print surface on top of hte conduit. The glass of halogen lights should be pointing to the side, not up - that's the only they will fit without the glass of the halogen bulb touching the top plate.

Note that one of the ends of conduit is taped, see picture below. The inside of the conduit is a convenient place to put the thermistor. One end is taped up, so there are no drafts inside the conduit, which would make the thermistor temperature reading inaccurate.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ7JAElPq7HzRAD-gtG8EtG0sXkJdjVNl63Hui47jv8GBHfiPY_daNpwIL3_N0Stqil99dLm7kqfGfE/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1MIu5_NNiGDCVWQB5xBeLBEWYOs_977nadkJrhPxPBZ8/edit#slide=id.gb328b2d63d_0_9 edit]

==Data Collection==
*Note that for the 6" bed [[D3D Universal 2]], 118mm (about 4.69") is the longest that fits in the bed. Pay attention to not using longer than 118 mm for a 6" bed - but longer bulbs can be used for larger beds.
*We have had a heater element under testing 24/7 for the last 2 months - there is no indication of forthcoming failure, and we expect the lifetime of the heater to be well over the 2000 hour typical [https://www.google.com/search?sxsrf=ALeKk026QG9BbsZl0rNsBS9KmerMgczY_w%3A1602863734253&source=hp&ei=dsKJX6q8DJDYsAXHkpG4Cw&q=lifetime+of+a+halogen+bulb&btnK=Google+Search&oq=how+to+configure+nvidia+geforce+gtx+1650+super+on+linux+mint&gs_lcp=CgZwc3ktYWIQAzIFCCEQoAEyBQghEKsCMgUIIRCrAjoOCAAQ6gIQtAIQmgEQ5QI6DgguELEDEMcBEKMCEJMCOggILhDHARCvAToLCC4QsQMQxwEQowI6CAgAELEDEIMBOggILhCxAxCDAToFCAAQsQM6AggAOgQIABAKOgYIABAWEB46CAghEBYQHRAeOgcIIRAKEKABUMsQWOmzAWD8tAFoBnAAeACAAeQGiAGhS5IBDTExLjQ3LjMuMi42LTGYAQCgAQGqAQdnd3Mtd2l6sAEG&sclient=psy-ab&ved=0ahUKEwiqz4DcvLnsAhUQLKwKHUdJBLcQ4dUDCAk&uact=5] lifetime of a halogen bulb if we are using 240V bulbs and running them at 1/4 power by using 120V.
* JET - Tried new 1" bars on heated bed and these caused smoking once heated to around 50C. I believe this is caused by the coating on these particular pieces of metal.

JET LOG

2021-08-03T16:38:34Z

JET OOTO:

JET LOG

2021-08-03T16:38:03Z

JET OOTO:

File:Houseassembly2.png

2021-07-21T16:03:39Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassembly2.png

File:Houseassemblymaster.fcstd

2021-07-21T16:02:44Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassemblymaster.fcstd

=Notes=
#'''Merge with [[File:Seh2 firstfloor.fcstd]] for complete assebly. First floor has been taken out.
#'''19:23, 11 July 2021''' first floor windows need to be dropped so it's even with rest of the tops.

File:RoofRiserAssembly.fcstd

2021-07-21T15:42:10Z

JET OOTO: JET OOTO uploaded a new version of File:RoofRiserAssembly.fcstd

File:RoofRiserAssembly.fcstd

2021-07-21T15:38:48Z

JET OOTO: JET OOTO uploaded a new version of File:RoofRiserAssembly.fcstd

File:Landing.fcstd

2021-07-21T14:31:07Z

JET OOTO: JET OOTO uploaded a new version of File:Landing.fcstd

File:Houseassembly2.png

2021-07-20T16:34:15Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassembly2.png

File:Houseassemblymaster.fcstd

2021-07-20T16:31:29Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassemblymaster.fcstd

File:SecondStoryRoofComplete.FCStd

2021-07-20T15:21:09Z

JET OOTO: Simple Object

Simple Object

File:SecondStoryRoofComplete.png

2021-07-20T15:19:24Z

JET OOTO: Simple Object

Simple Object

Seed Home v2 3D CAD

2021-07-20T15:18:18Z

JET OOTO: /* Roof */

{{Hint|As of Dec 2020, the Rosebud model is the one we are building and releasing as our first product candidate.}}

=CAD for BOM Purposes + Lumber Cut Lists + Wall Aperture Details=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSj2QRIcmJDnAz3DvoOg3AILdrfiDrgY6ywEvZcEY55Wvn1bgaei1obAcIrDFdsJf2MMAW7e371glr0/embed?start=false&loop=false&delayms=3000#17" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1wWbj03CQgsJpq1TQaR3Ak9wdGK6av9ExfFlc8O-ER7I/edit#slide=id.gb344355f04_0_10 edit]

==Deprecated Floor Plan==
This doc is in preparation for generating accurate CAD. By thinking out the logic of the system carefully, we optimize for build efficiency and thus degenerate to a sound design, which is then CADded up.

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ4zmzecAHz_NkwZOdBRiSRAUn3H0E7Mtlydyzxdtp-8CKYvLWckc-eFV9Zsmptnrlo5MgRfav7cSGB/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1FQrn4a2RHaWLJeLwQl_-1XRXA9CRvvqNDQW-iJBcqV4/edit#slide=id.g5c3be0ce2d_1_28 edit]

=Seed Home 2 Part Library=
* Interior Walls - [[File:intwalls.sh3d.zip]]
*See [[Seed Home 2 Part Library]]
*[[Seed Home 2 Utility Panel 3D CAD]]

==CAD Detail Documents==

*[[Second Story Door]]

==Wall Modules in SweetHome3d (Structural Design) and FreeCAD (Complete Model)==
See parts of wall modules at [[Architecture Part Library]].

Module Map - Exterior Wall modules - 1-23 are on the first floor - 24-47 are on the second, and the rest are 48-59 for first floor interior modules, and 60-69 are second floor interior modules.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQe3GXvvIKz-3fsiO-R4iIDqlwWZysTXhsa0eK9Bx9ezC26KopU4Aj4pX1jw2_Wx5_IDGFGd9zs30W8/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1KRK3ti4N4kDHfRlniSUiLrpw_jmTOHT0VQGb7vFhU88/edit#slide=id.gd976d2a7e2_6_0 edit]

Note: files end in zip. After download, don't extract - just change filename to remove the .zip at the end and file will be openable in SweetHome3D. These can be upgraded in FreeCAD, the Sweet Home is a start.

These files are extracted from the SweetHome3D technical design file for structure of Seed Eco-Home 2 - [[Seed Eco-Home 2 Technical Design of Structure in SweetHome3D]]

[[File:houseassembly2.png|100px]][[File:seh2_firstfloor.png|100px]][[File:positionallycorrectmod1.png|100px]][[File:upperdoorupdate.png|100px]][[File:houseassemblymaster.png|100px]][[File:houselocation.png|100px]][[File:doorwindow2.png|100px]][[File:doorwindow.png|100px]][[File:adjustmentmodule8.png|100px]][[File:smallwindow3.png|100px]][[File:smallwindow2.png|100px]][[File:smallwindow.png|100px]][[File:frenchdoorexteriortrimdetail.png|100px]][[File:frenchdoorwithtrim.png|100px]][[File:seh2wall4freecad.png|100px]][[File:seh2wall1freecad.png|100px]][[File:seh2wall6.png|100px]][[File:seh2wall17.png|100px]][[File:seh2wall23.png|100px]][[File:seh2wall9.png|100px]][[File:seh2wall3rework4.png|100px]][[File:seh2wall3rework3.png|100px]][[File:seh2wall3rework2.png|100px]][[File:seh2wall3rework.png|100px]][[File:seh2wall22rework2.png|100px]][[File:seh2wall22rework.png|100px]][[File:seh2wall22.png|100px]][[File:seh2wall3.png|100px]][[File:seh2wall2.png|100px]][[File:seh2wall1.png|100px]]

<gallery perrow=6>

File:houseassembly2.png|'''House Assembly Master File.''' - FreeCAD - [[File:houseassemblymaster.fcstd]]

File:seh2_firstfloor.png|'''House Assembly First Floor Only''' - FreeCAD - [[File:seh2_firstfloor.fcstd]] Includes plumbing on slab [[File:Plumbing_on_slab.fcstd]]

File:houselocation.png|'''House Location Master File.''' - FreeCAD - [[File:houselocation.fcstd]]

File:doorwindow2.png|'''Door and window module for adjustment.''' - FreeCAD - [[File:doorwindow.fcstd]]

File:positionallycorrectmod1.png|'''Wall Module 1''' -SweetHome3D-[[File:seh2wall1.sh3d.zip]]- FreeCAD - [[File:seh2_wall_1.fcstd]]--[[Build Cheatsheet for Wall Module 1|Build Cheatsheet]]

File:seh2wall2.png|'''Wall Module 2''' -SweetHome3D-[[File:seh2wall2.sh3d.zip]]-- FreeCAD - [[File:seh2_wall_2.fcstd]] - -[[Build Cheatsheet for Wall Module 2|Build Cheatsheet]]

File:seh2wall3rework4.png|'''Wall Module 3''' -SweetHome3D-[[File:seh2_wall_3.sh3d.zip]] - FreeCAD -[[File:seh2_wall_3.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_3|Build Cheatsheet]]

File:seh2wall4freecad.png|'''Wall Module 4''' -SweetHome3D-[[File:seh2_wall_4.sh3d.zip]] - FreeCAD - [[File:seh2_wall_4.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_4|Build Cheatsheet]]

File:seh2wall5.png|'''Wall Module 5''' -SweetHome3D-[[File:seh2_wall_5.sh3d.zip]] -[[Build_Cheatsheet_for_Wall_Module_5|Build Cheatsheet]] FreeCAD - [[File:seh2_wall_5.fcstd]] - Same as Wall Module 17 (opposite long side left corner)

File:seh2wall6.png|'''Wall Module 6''' -SweetHome3D-[[File:seh2_wall_6.sh3d.zip]] - FreeCAD - [[File:seh2_wall_6.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_6|Build Cheatsheet]]

File:seh2wall7.png|'''Wall Module 7''' -SweetHome3D-[[File:seh2_wall_7.sh3d.zip]] - FreeCAD - [[File:seh2_wall_7.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_7|Build Cheatsheet]]

File:adjustmentmodule8.png|'''Wall Module 8''' -SweetHome3D-[[File:seh2_wall_8.sh3d.zip]] - FreeCAD - [[File:seh2_wall_8.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_8|Build Cheatsheet]] Adjustment module.

File:seh2wall9.png|'''Wall Module 9''' -SweetHome3D-[[File:seh2_wall_9.sh3d.zip]] - FreeCAD - [[File:seh2_wall_9.fcstd]] - [[Build_Cheatsheet_for_Wall_Module_9|Build Cheatsheet]]

File:seh2_wall_10.png|'''Wall Module 10''' -SweetHome3D-[[File:seh2_wall_10.sh3d.zip]] - FreeCAD - [[File:seh2_wall_10.fcstd]] [[Build_Cheatsheet_for_Wall_Module_10|Build Cheatsheet]]

File:Seh2 wall 11.png|'''Wall Module 11''' -SweetHome3D-[[File:seh2_wall_11.sh3d.zip]] - FreeCAD - [[File:seh2_wall_11.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_11|Build Cheatsheet]]

File:seh2wall12.png|'''Wall Module 12''' -SweetHome3D-[[File:seh2_wall_12.sh3d.zip]] - FreeCAD - [[File:seh2_wall_12.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_12|Build Cheatsheet]]. Structure same as Module 23.

File:seh2wall1freecad.png|'''Wall Module 13''' -SweetHome3D-[[File:seh2_wall_13.sh3d.zip]] - FreeCAD - [[File:seh2_wall_13.fcstd]] --[[Build_Cheatsheet_for_Wall_Module_13|Build Cheatsheet]]. Same as Wall 1 structure. But - Wall 1 has a hole for electrical.

File:seh2wall14.png|'''Wall Module 14''' -SweetHome3D-[[File:seh2_wall_14.sh3d.zip]] - FreeCAD - [[File:seh2_wall_14.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_14|Build Cheatsheet]]

File:seh2wall15.png|'''Wall Module 15''' -SweetHome3D-[[File:seh2_wall_15.sh3d.zip]] - FreeCAD - [[File:seh2_wall_15.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_15|Build Cheatsheet]]

File:Seh2wall16.png|'''Wall Module 16''' -SweetHome3D-[[File:seh2_wall_16.sh3d.zip]] - FreeCAD - [[File:seh2_wall_16.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_16|Build Cheatsheet]] Same structure as Module 4.

File:seh2wall17.png|'''Wall Module 17''' -SweetHome3D-[[File:seh2_wall_17.sh3d.zip]] - FreeCAD - [[File:seh2_wall_17.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_17|Build Cheatsheet]]

File:smallwindow3.png|'''Wall Module 18''' -SweetHome3D-[[File:seh2_wall_18.sh3d.zip]] - FreeCAD - [[File:seh2_wall_18.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_18|Build Cheatsheet]] 1st story window module.

File:smallwindow3.png|'''Wall Module 19''' -SweetHome3D-[[File:seh2_wall_19.sh3d.zip]] - FreeCAD - [[File:seh2_wall_19.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_19|Build Cheatsheet]] First story window module. Structure same as 18.

File:Seh2wall20.png|'''Wall Module 20''' -SweetHome3D-[[File:seh2_wall_20.sh3d.zip]] - FreeCAD - [[File:seh2_wall_20.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_20|Build Cheatsheet]]

File:seh2_wall_21.png|'''Wall Module 21''' -SweetHome3D-[[File:seh2_wall_21.sh3d.zip]] - FreeCAD - [[File:seh2_wall_21.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_21|Build Cheatsheet]]

File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' -SweetHome3D-[[File:seh2_wall_22.sh3d.zip]] - FreeCAD -[[File:seh2_wall_22.fcstd]] [[Build_Cheatsheet_for_Wall_Module_22|Build Cheatsheet]] Note: FreeCAD file is updated, SH3D is older

File:seh2wall23.png|'''Wall Module 23''' -SweetHome3D-[[File:seh2_wall_23.sh3d.zip]] - FreeCAD -[[File:seh2_wall_23.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_23|Build Cheatsheet]]
</gallery>

==Second Floor Exterior==

<gallery perrow=6>

File:seh2_8ft_panel.png|'''Full panel''' - FreeCAD Detail-[[File:seh2_8ft_panel.fcstd]] Modules 25,29,30,31,33,34,37,38,43 & 44

File:seh2_8ft_short_left_corner.png|'''Short left corner''' - FreeCAD Detail-[[File:seh2_8ft_short_left_corner.fcstd]] Modules 24 & 36

File:seh2_8ft_short_right_corner.png|'''Short right corner''' - FreeCAD Detail-[[File:seh2_8ft_short_right_corner.fcstd]] Modules 27 & 39

File:seh2_8ft_long_left_corner.png|'''Long left corner''' - FreeCAD Detail-[[File:seh2_8ft_long_left_corner.fcstd]] Modules 28 & 40

File:seh2_8ft_long_right_corner.png|'''Long right corner''' - FreeCAD Detail-[[File:seh2_8ft_long_right_corner.fcstd]] Modules 35 & 47

File:seh2_8ft_window.png|'''Window''' - FreeCAD Detail-[[File:seh2_8ft_window.fcstd]] Modules 41, 42, 45 & 46 (Note: this has siding over entire panel including window)

</gallery>

(Note: SweetHome3D starts 2nd floor numbering at #25 (SH3D #25 is 2nd Floor Wall Module #24, etc)

<gallery perrow=6>

File:seh2_8ft_short_left_corner.png|'''Wall Module 24''' [[:File:seh2_wall_25.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_24.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_24|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 25''' [[:File:seh2_wall_26.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_25.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_25|Build Cheatsheet]]

File:Upperdoorupdate.png|'''Wall Module 26 - second story door''' [[:File:seh2_wall_27.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_26.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_26|Build Cheatsheet]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 27''' [[:File:seh2_wall_28.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_27.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_27|Build Cheatsheet]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 28''' [[:File:seh2_wall_29.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_28.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_28|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 29''' [[:File:seh2_wall_30.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_29.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_29|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 30''' [[:File:seh2_wall_31.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_30.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_30|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 31''' [[:File:seh2_wall_32.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_31.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_31|Build Cheatsheet]]

File:seh2wall32.png|'''Wall Module 32''' [[:File:seh2_wall_33.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_32.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_32|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 33''' [[:File:seh2_wall_34.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_33.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_33|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 34''' [[:File:seh2_wall_35.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_34.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_34|Build Cheatsheet]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 35''' [[:File:seh2_wall_36.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_35.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_35|Build Cheatsheet]]

File:seh2_8ft_short_left_corner.png|'''Wall Module 36''' [[:File:seh2_wall_37.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_36.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_36|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 37''' [[:File:seh2_wall_38.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_37.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_37|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 38''' [[:File:seh2_wall_39.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_38.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_38|Build Cheatsheet]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 39''' [[:File:seh2_wall_40.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_39.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_39|Build Cheatsheet]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 40''' [[:File:seh2_wall_41.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_40.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_40|Build Cheatsheet]]

File:seh2wall41.png|'''Wall Module 41''' [[:File:seh2_wall_42.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_41.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_41|Build Cheatsheet]]

File:seh2wall42.png|'''Wall Module 42''' [[:File:seh2_wall_43.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_42.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_42|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 43''' [[:File:seh2_wall_44.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_43.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_43|Build Cheatsheet]]

File:seh2_8ft_panel.png|'''Wall Module 44''' [[:File:seh2_wall_45.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_44.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_44|Build Cheatsheet]]

File:seh2_8ft_window.png|'''Wall Module 45''' [[:File:seh2_wall_46.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_45.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_45|Build Cheatsheet]]

File:seh2_8ft_window.png|'''Wall Module 46''' [[:File:seh2_wall_47.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_46.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_46|Build Cheatsheet]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 47''' [[:File:seh2_wall_48.sh3d.zip|SweetHome3D]] [[:File:seh2_wall_47.fcstd|FreeCAD]] [[Build_Cheatsheet_for_Wall_Module_47|Build Cheatsheet]]

</gallery>

==First Floor Interior==

<gallery perrow=6>

File:seh2_9ft_interior.png|'''Full 2x4 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_interior.fcstd]]

File:seh2_9ft_2x6_interior.png|'''Full 2x6 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_2x6_interior.fcstd]]

File:seh2wall48.png|'''Wall Module 48''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_48.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_48|Build Cheatsheet]]

File:seh2wall49.png|'''Wall Module 49''' -SweetHome3D-[[File:seh2_wall_49.sh3d.zip]] - FreeCAD -[[File:seh2_wall_49.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_49|Build Cheatsheet]]

File:seh2wall50.png|'''Wall Module 50''' -SweetHome3D-[[File:seh2_wall_50.sh3d.zip]] - FreeCAD -[[File:seh2_wall_50.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_50|Build Cheatsheet]]

File:seh2wall51.png|'''Wall Module 51''' -SweetHome3D-[[File:seh2_wall_51.sh3d.zip]] - FreeCAD -[[File:seh2_wall_51.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_51|Build Cheatsheet]]

File:seh2wall52.png|'''Wall Module 52''' -SweetHome3D-[[File:seh2_wall_52.sh3d.zip]] - FreeCAD -[[File:seh2_wall_52.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_52|Build Cheatsheet]]

File:laundry.png|'''Wall Module 55 (Laundry)''' - FreeCAD -[[File:Laundry.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_55|Build Cheatsheet]]

File:seh2wall56.png|'''[[Wall Module 56]]''' -SweetHome3D - [https://drive.google.com/file/d/16dmPzyMUUcRUyOfgH4Kv7yQOHTJ2IEDz/view?usp=sharing] - FreeCAD -[[File:seh2_wall_56.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_56|Build Cheatsheet]]

File:seh2wall57.png|'''Wall Module 57''' -SweetHome3D-[[File:seh2_wall_57.sh3d.zip]] - FreeCAD -[[File:seh2_wall_57.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_57|Build Cheatsheet]]

File:seh2wall58.png|'''Wall Module 58''' -SweetHome3D-[[File:seh2_wall_58.sh3d.zip]] - FreeCAD -[[File:seh2_wall_58.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_58|Build Cheatsheet]]

File:seh2wall59.png|'''Wall Module 59''' -SweetHome3D-[[File:seh2_wall_59.sh3d.zip]] - FreeCAD -[[File:seh2_wall_59.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_59|Build Cheatsheet]]

</gallery>

==Second Floor Interior==
[[File:seh2_8ft_interior_door.png|100px]][[File:seh2_8ft_interior.png|100px]][[File:seh2wall63-4.png|100px]][[File:seh2wall64.png|100px]][[File:seh2wall63-3.png|100px]][[File:seh2wall63.png|100px]]

<gallery>
File:seh2_8ft_interior.png|'''Full interior panel''' - FreeCAD Detail-[[File:seh2_8ft_interior.fcstd]]

File:seh2_8ft_interior_door.png|'''Interior door''' - FreeCAD Detail-[[File:seh2_8ft_interior_door.fcstd]] (38x83 rough opening)

File:seh2wall60.png|'''Wall Module 60''' [[:File:seh2_wall_60.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_60.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_60|Build Cheatsheet]]

File:seh2wall61.png|'''Wall Module 61'''<br/>[[:File:seh2_wall_61.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_61.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_61|Build Cheatsheet]]

File:seh2wall62.png|'''[[Wall Module 62]]''' -SweetHome3D-[[File:seh2_wall_62.sh3d.zip]] - FreeCAD - [[File:seh2_wall_62.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_62|Build Cheatsheet]]

File:seh2wall63-4.png|'''Wall Module 63'''-SweetHome3D-[[File:seh2_wall_63.sh3d.zip]] - FreeCAD - [[File:seh2_wall_63.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_63|Build Cheatsheet]]

File:seh2wall64.png|'''Wall Module 64'''-SweetHome3D-[[File:seh2_wall_64.sh3d.zip]] - FreeCAD - [[File:seh2_wall_64.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_64|Build Cheatsheet]]

File:seh2_8ft_interior_door.png|'''[[Wall Module 65]]'''- Interior Door -SweetHome3D-[[File:seh2_wall_65.sh3d.zip]] - FreeCAD - [[File:seh2_wall_65.fcstd|]]--[[Build_Cheatsheet_for_Wall_Module_65|Build Cheatsheet]]

File:seh2wall66.png|'''Wall Module 66'''-SweetHome3D-[[File:seh2_wall_66.sh3d.zip]] - FreeCAD - [[File:seh2_wall_66.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_66|Build Cheatsheet]]

File:seh2_8ft_interior.png|'''Wall Module 67'''<br/>[[:File:seh2_wall_67.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_67.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_67|Build Cheatsheet]]

File:Seh2wall68.png|'''Wall Module 68'''<br/> [[:File:seh2_wall_68.sh3d.zip|SweetHome 3D]]<br/>[[:File:seh2_wall_68.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_68|Build Cheatsheet|Build Cheatsheet]]<br/>[https://github.com/cryptogoth/freecad-python/blob/main/Panel-Workbench/PanelsGui.py#L80 Python Workbench Code]

File:seh2wall69.png|'''Wall Module 69'''-SweetHome3D-[[File:seh2_wall_69.sh3d.zip]] - FreeCAD - [[File:seh2_wall_69.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_69|Build Cheatsheet]]
</gallery>

==Select Details==

[[File:blockingdetail2.png|100px]][[File:blockingdetail.png|100px]][[File:southwalldetail3.png|100px]][[File:southwalldetail2.png|100px]][[File:southwalldetail.png|100px]][[File:SEH2stairs.png|100px]][[File:stringerless.png|100px]][[File:toptrim6.png|100px]][[File:toptrim5.png|100px]][[File:toptrim4.png|100px]][[File:toptrim2.png|100px]][[File:toptrim.png|100px]][[File:roofdetail.png|100px]]

<gallery>

File:blockingdetail2.png|"First Floor Ceiling Detail. "- FreeCAD - [[File:blockingdetail.fcstd]]

File:southwalldetail3.png|"South wall detail. "- FreeCAD - [[File:southwalldetail.fcstd]]

File:SEH2stairs.png|"Stringerless stairs for SEH 2. "- FreeCAD - [[File:SEH2stairs.fcstd]]

File:stringerless.png|"Stringerless stairs concept. "- FreeCAD - [[File:stringerless.fcstd]]

File:toptrim5.png|"Top wall trim. "- FreeCAD - [[File:toptrim.fcstd]]

File:roofdetail.png|"Roof Detail. "- FreeCAD - [[File:roofdetail.fcstd]].

</gallery>

==Second Story Platform==

[[File:secondstoryfloor4.png|100px]][[File:secondstoryfloor3.png|100px]][[File:secondstoryfloor2.png|100px]][[File:secondstoryfloor.png|100px]]

<gallery>

File:secondstoryfloor3.png|'''[[Second Story Floor Platform]]''' - FreeCAD - [[File:secondstoryfloor.fcstd]].

</gallery>

==Roof==

<gallery>

File:check.png|'''Second Story Roof''' - FreeCAD - [[File:SecondStoryRoof.fcstd]].

File:RoofRiserAssembly.png|'''Roof Riser Assembly''' - FreeCAD - [[File:RoofRiserAssembly.fcstd]].

File:RoofInsulationBox.png|"Roof Insulation Box. "- FreeCAD - [[File:RoofInsulationBox.FCStd]].

File:RoofInsulationBox_0.5inch.png|"Roof Insulation Box - 0.5-inch. "- FreeCAD - [[File:RoofInsulationBox_0.5inch.FCStd]].

File:Roof_OSB.png|"Roof OSB"- FreeCAD - [[File:Roof_OSB.FCStd]].

File:SecondStoryRoofComplete.png|"Second Story Roof Assembly"- FreeCAD - [[File:SecondStoryRoofComplete.FCStd]].

</gallery>

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ49OCEr3Sl6YKudBd2MbOAU0Kvx6XPX2lFX_2BiG32Bv4hOUnP1ONTImI7IlKT0d1jpA5sFwxi0-ms/embed?start=false&loop=false&delayms=3000#slide=id.gc9334e75e1_0_2" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1N1lS8RBMy0Y0JnR_h1tz23CYFoR5zespNG4T5m4nnZE/edit#slide=id.gc9334e75e1_0_2 edit]

=Catarina's Source Google Drive, Sweet Home 3D Files=

*Laundry module - [https://drive.google.com/file/d/1zjWbmlwpjXy4DUW1xlzSzDnDrqDglsUs/view?usp=sharing]
*Drive, OBI Models - [https://drive.google.com/drive/folders/0B0NG-lv1ELQvdE9xSGZEeWR3Mm8]
**'''CAD, Rosebud, Working Model as of 5/14/21''' [https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view?usp=sharing]
**'''CAD, Supporting Rosebud Model Files''' - [https://drive.google.com/drive/folders/1ELOrXeIenMNjfYwr6g5HUqoNjGqA38DF]
*Building Book - [Technical designs are found in the Building Book - [https://drive.google.com/drive/folders/1SZrTCkX9S_L8JSD_Dq_xeLDM53MP2vZq]
*Shower drain kit - dimensions - [https://images.homedepot-static.com/catalog/pdfImages/cd/cd10c1ce-fd8e-4efc-8415-60dc104f5090.pdf]

'''Visual History:'''

[[File:staironly.png|100px]][[File:floorandroof.png|100px]][[File:stairs2.png|100px]][[File:stairs.png|100px]][[File:staircase.png|100px]][[File:rooflayers.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:staironly.png|'''Stairs only, 1/10 scale.''' - FreeCAD - [[File:staironly.fcstd]].

File:rooflayers.png|'''Roof layers.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

File:staircase.png|'''Staircase. Technical detail.''' - SweetHome3D -[https://drive.google.com/file/d/1t9PQIM0JRXRPsQ6aqhsMETB53VRYnqgL/view?usp=sharing].

File:stairs.png|'''Stairs. Early concept detail.''' - SweetHome3D -[https://drive.google.com/file/d/1HFNCDa2t4rpEKunZowZ8d9cRtb9EF2li/view?usp=sharing].

File:stairs2.png|'''Stairs. Correct for Aspen.''' - SweetHome3D -[https://drive.google.com/file/d/1-X9sJiHt2KS7ZrOPAeNj0VC2UQlKELNT/view?usp=sharing].

File:floorandroof.png|'''Technical of floor and roof.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

</gallery>

=Concept Modules=

==Part Library==

'''Visual History:'''

[[File:2ndfloorwithbands.png|100px]][[File:trellisonly.png|100px]][[File:bandconcept.png|100px]][[File:overhangrework2.png|100px]][[File:overhangrework.png|100px]][[File:overhang.png|100px]][[File:2ndfloorwithband.png|100px]][[File:firstfloorconcept.png|100px]][[File:secondfloorconcept.png|100px]]

'''Gallery:'''

<gallery perrow=6>
File:2ndfloorwithbands.png|'''Second floor concept with bands.''' - FreeCAD -[[File:2ndfloorwithbands.fcstd]].

File:overhangrework2.png|'''Overhang band - rework from rough underlying shape..''' - FreeCAD -[[File:overhangrework.fcstd]].

File:trellisonly.png|'''Overhang band - detail, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:trellisonly.fcstd]].

File:2ndfloorwithband.png|'''Second floor with band concept, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:2ndfloorwithband.fcstd]].

File:firstfloorconcept.png|'''First floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/first_floor.fcstd].

File:secondfloorconcept.png|'''Second floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/2nd.fcstd].

</gallery>

=Technical Modules=
==Stair Design==
#Please download SweetHome3D to view this file - https://drive.google.com/file/d/1X7H-kKLtFZrs0y3Qwq7GYdgxnL4wskm5/view?usp=sharing
#Determine the correct stair height, and then the landing is like in this concept model - https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view
#Then do the staircase in FreeCAD, which I started here - https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

[[File:stairstringer2.png|100px]][[File:stairstringer.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' Generate technical drawing with TechDraw. FreeCAD -[[File:stairstringer.fcstd]].

</gallery>

=House Build=

Starting with foundation, to bathroom, walls.

[[File:rosebudplumbing2.png|100px]][[File:addedbathtofound.png|100px]][[File:addedholetofound.png|100px]][[File:sillplate7.png|100px]][[File:mudsillanchor2.png|100px]][[File:mudsillanchor.png|100px]][[File:sillplate6.png|100px]][[File:sillplate5.png|100px]][[File:sillplate4.png|100px]][[File:sillplate3.png|100px]][[File:sillplate.png|100px]][[File:2inchinsulation.png|100px]][[File:Baseslab.png|100px]]

<gallery perrow=6>

File:rosebudplumbing.png|'''Rosebud plumbing.''' - FreeCAD - [[File:rosebudplumbing.fcstd]]
File:sillplate7.png|'''Foundation only.''' Note this file has entire sill detail including cement board, flexible vinyl flashing, sill gasket, and ramset boards under doors. Next file continues with the plumbing detail. FreeCAD -[[File:foundationonly.fcstd]]
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]

</gallery>

=Top Plate, Ceiling, Roof=
[[File:roof.png|100px]][[File:ceiling.png|100px]][[File:rosebudtopplate.png|100px]]
<gallery perrow=6>

File:roof.png |'''Rosebud roof.''' All individual parts. Correct shape, stair location not present. - FreeCAD -[[File:roof.FCStd]].

File:ceiling.png|'''Rosebud ceiling.''' - FreeCAD -[[File:ceiling.FCStd]]. '''Deprecated. Newer above.'''

File:rosebudtopplate.png|'''Rosebud top plate.''' - FreeCAD -[[File:rosebudtoplate.FCStd]].

</gallery>

=Wall Modules - LOD 400-500=
Note: for BOM-ready files, Master Module file includes clones for memory management and simplified view within Part Tree. Sample BOM file - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]. '''Missing from BOM file''' - R38 roof insulation, roof ceiling, interior framing, interior insulation. See BOM spreadsheet - [https://docs.google.com/spreadsheets/d/1mxd28_UTffkYQDfi8vPDwGrSyvsTUFg2UACXwgo7wGc/edit#gid=0] generated from FreeCAD BOM test file for first and second floor of house - not including garage - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]

[[File:8footwindow5.png|100px]][[File:8footwindow4.png|100px]][[File:ddfinal.png|100px]][[File:ddplaceholder.png|100px]][[File:8footwall2.png|100px]][[File:8footwall.png|100px]][[File:9footmediumwindow4.png|100px]][[File:singledoormaster9.png|100px]][[File:SAWP.png|100px]][[File:doorsilltape.png|100px]][[File:dripcaptape.png|100px]][[File:dripcap.png|100px]][[File:9footdoorframe4.png.png|100px]][[File:9footdoorframe3.png.png|100px]][[File:9footdoubledoorplaceholder.png|100px]][[File:9footdoubledoor2.png|100px]][[File:9footdoubledooronly.png|100px]][[File:9footdoubledoor.png|100px]][[File:9footmediumwindow3.png|100px]][[File:9footmediumwindow2.png|100px]][[File:9footmediumwindowonly.png|100px]][[File:9footmediumwindow.png|100px]][[File:firstfloorwithdoor.png|100px]][[File:9footdoorframe2.png|100px]][[File:9footdoorframe.png|100px]][[File:9footdoor.png|100px]][[File:9footwalls132.png|100px]][[File:9footwalls13.png|100px]][[File:9footwall12panels.png|100px]][[File:9footwall2.png|100px]][[File:9footwall.png|100px]]

<gallery perrow=6>

File:8footwall2.png|'''8 Foot Wall Panel.''' - FreeCAD -[[File:8footwall.FCStd]].

File:8footwindow4.png|'''8 Foot Large Window Panel. Pseudo, with med window and 9' studs.''' - FreeCAD -[[File:8footwindow.FCStd]].

File:9footwall2.png|'''9 Foot Wall''' - FreeCAD -[[File:9footwall.FCStd]].

File:singledoormaster9.png|'''9 Foot Single Door Master.''' - FreeCAD -[[File:9footdoorpanel.FCStd]].

File:ddfinal.png|'''9 Foot Double Door.''' - FreeCAD -[[File:9footdoubledoor.FCStd]].

File:ddplaceholder.png|'''9 Foot Double Door placeholder.''' - FreeCAD -[[File:9footdoubledoorplaceholder.FCStd]].

File:9footmediumwindow4.png|'''9 Foot Medium Window Panel.''' - FreeCAD -[[File:9footmediumwindow.FCStd]].

</gallery>
==Assemblies==
<gallery perrow=6>

File:firstfloorwithdoor.png|'''9 Foot Walls'''. - FreeCAD -[[File:9footwalls.FCStd]].

File:seh2secondfloor.png|'''Second Floor''' - FreeCAD - [[File:seh2secondfloor.fcstd]]

</gallery>

==Wall Parts==
<gallery perrow=6>

File:largewindow.png|'''Large window.''' - FreeCAD -[[File:largewindowonly.FCStd]].

File:9footdoubledooronly.png|'''9 Foot Double Door only.''' - FreeCAD -[[File:9footdoubledooronly.FCStd]].

File:9footmediumwindowonly.png|'''9 Foot Medium Window pane.''' - FreeCAD -[[File:9footmediumwindowonly.FCStd]].

File:9footdoor.png|'''9 Foot Door, door only, single.''' - FreeCAD -[[File:9footdoor.FCStd]]. Source SweetHome folder - [https://drive.google.com/drive/folders/180KINsLnK6vUlcnhCgAyzDThc-vlaV1G].

</gallery>

=Plumbing Rough-In=

Note: due to local variations - the actual CAD must reconcile against materials used ([https://photos.app.goo.gl/6Mu2gsXhC9jhsi82A]) and the data collection from annotated PVC pictures at [https://photos.app.goo.gl/8Jqt4scFkxHnM8d59]. This is proper CAD-BOM-Reality reconciliation required for a full digital model.

[[File:secondfloortoilet.png|100px]][[File:bathroomonly2.png|100px]][[File:bathroomonly.png|100px]][[File:foundationonly.png|100px]][[File:wallstarting.png|100px]][[File:finishingplumbing.png|100px]][[File:3sweepelbow.png|100px]][[File:continuinghouse.png|100px]][[File:grading.png|100px]][[File:sinkdrain.png|100px]][[File:tuscany.png|100px]][[File:toilet.png|100px]][[File:drain.png|100px]][[File:cuttrapbottom.png|100px]][[File:cuttraptop.png|100px]][[File:15trap.png|100px]][[File:house3.png|100px]][[File:house2.png|100px]][[File:house.png|100px]][[File:bathroomonslab.png|100px]][[File:drainkit4.png|100px]][[File:drainkit3.png|100px]][[File:drainkit2.png|100px]][[File:drainkit.png|100px]][[File:15elbow.png|100px]]

<gallery perrow=6>

File:secondfloortoilet.png|'''Second Floor Toilet Beginning.'''. FreeCAD -[[File:secondfloortoilet.fcstd]]

File:bathroomonly.png|'''Plumbing on slab.''' This can be merged with foundation. FreeCAD -[[File:Plumbing_on_slab.fcstd]]

File:3sweepelbow.png |'''3" sweep elbow for toilet.''' - FreeCAD -[[File:3sweepelbow.fcstd]]

File:grading.png |'''House drainage slope.''' Codes say 6" over 10'. - FreeCAD -[[File:grading.fcstd]]

File:tuscany.png |'''Tuscany toilet.''' - FreeCAD -[[File:tuscany.fcstd]]

File:cuttraptop.png |'''Cut trap bottom, 1.5".''' - FreeCAD -[[File:cuutrapbottom.fcstd]]

File:cuttrapbottom.png |'''Cut trap top, 1.5".''' - FreeCAD -[[File:cuutraptop.fcstd]]

File:15trap.png |'''1.5" PVC Trap.''' - FreeCAD -[[File:15trap.fcstd]]

File:bathroomonslab.png |'''Bathroom on slab.''' - FreeCAD -[[File:bathroomonslab.fcstd]]

File:drainkit4.png |'''Tub drain kit''' - FreeCAD -[[File:tubdrainkit.fcstd]]

File:15elbow.png |'''1.5" elbow''' - FreeCAD -[[File:15elbow.fcstd]]
</gallery>

==BOM==
*4x3 closet bend is recommended [https://terrylove.com/forums/index.php?threads/4x3-inch-closet-bend-or-3-inch-closet-bend.2826/] - so get one at [https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/pvc-fittings/pvc-dwv-fittings/nibco-reg-4x3-closet-elbow-pvc-dwv/p-1444449182622-c-9383.htm]

=Links=
*[[Seed Home v2 3D CAD]]

=Part Library=
[[File:rosebudwalls.png|100px]][[File:spipe.png|100px]][[File:rosebudcore.png|100px]]
[[File:rosebudexp.png|100px]]
[[File:rosebudfound.png|100px]]

Aspen 1 has corridor in front, Aspen 2 in the back. Rosebud is the simplehut.
=Walls - Deprecated=

<gallery perrow=6>
File:rosebudwalls.png|'''Seed Home 2 - Rosebud, walls.''' - FreeCAD - [[File:rosebudwalls.FCStd]].

File:sh2house.png|'''Seed Home 2, Aspen.''' - FreeCAD - [[File:sh2house.FCStd]]. SweetHome3D - [[File:sh2house.zip]]

File:sh2wall.png|'''Seed Home 2 Wall.''' - FreeCAD - [[File:sh2wall.FCStd]]. SweetHome3D - [[File:sh2wall.zip]]

File:sh2door.png|'''Seed Home 2 Door.''' - FreeCAD - [[File:sh2door.FCStd]]. SweetHome3D - [[File:sh2door.zip]]

File:sh2doubledoor.png|'''Seed Home 2 Double Door.''' - FreeCAD - [[File:sh2doubledoor.FCStd]]. SweetHome3D - [[File:sh2doubledoor.zip]]. Source folder - [https://drive.google.com/file/d/1Dbe4lVsE6RyOJUEu4zBhKTfNbJgmNreG/view?usp=sharing]

File:sh2window1.png|'''Seed Home 2 Window 1.''' - FreeCAD - [[File:sh2window1.FCStd]]. SweetHome3D - [[File:sh2window1.zip]]

File:sh2upperroof.png|'''Seed Home 2 Upper Roof.''' - FreeCAD - [[File:sh2upperroof.FCStd]]. SweetHome3D - [[File:sh2upperroof.zip]]

File:sh2lowerroof.png|'''Seed Home 2 Lower Roof.''' - FreeCAD - [[File:sh2lowerroof.FCStd]]. SweetHome3D - [[File:sh2lowerroof.zip]]

File:sh2topplate.png|'''Seed Home 2 Top Plate.''' - FreeCAD - [[File:sh2topplate.FCStd]]. SweetHome3D - [[File:sh2topplate.zip]]

File:sh2uppersheath.png|'''Seed Home 2 Upper Sheathing.''' - FreeCAD - [[File:sh2uppersheath.FCStd]]. SweetHome3D - [[File:sh2uppersheath.zip]]

File:sh2walls.png|'''Seed Home 2 walls.''' - FreeCAD -[[File:sh2walls.FCStd]]. SweetHome3D -[[File:sh2walls.zip]]

File:slab.png|'''Seed Home 2 slab.''' - FreeCAD -[[File:sh2slab.FCStd]]
File:sh2sill.png|'''Seed Home 2 Sill Plate.''' - FreeCAD -[[File:sh2sill.FCStd]]
</gallery>

==Foundation==

See also integration of bathroom for initial plumbing stub-out - [[Shower Part Library]]

<gallery perrow=6>

File:rosebudcore.png|'''Rosebud core. 1000 sf.''' - [[File:rosebud.fcstd]]. Source in Sweet Home 3D - [https://drive.google.com/file/d/1VDnPYKoQJsf5yr0xyyQ423YPzs2y9lKU/view?usp=sharing].

File:rosebudexp.png|'''Rosebud expansion, 2000 sf + garage.''' - [[File:rosebudexp.fcstd]]. Source in SH3D - [https://drive.google.com/file/d/1aifP3eyP0CqmHlb1nwnHdPJuk2dzCGfL/view?usp=sharing]

File:rosebudfound.png|'''Rosebud foundation.''' Deprecated. Use the one from the plumbing rough-in. [[File:rosebudfound.fcstd]]

File:aspen.jpg|'''Aspen model of the Seed Home, 1000 sf.''' - FreeCAD -[[File:asepn.FCStd]]. Source is SH2Technical-Aspen1-Expansion2A.sh3d file at [https://drive.google.com/drive/folders/15k8MlWTz3yMVvIeZYAeOJVm54pB8noHM]

File:aspen2500.png|'''Aspen expanded, 2250 sf + sunroom''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625.png|'''Aspen expanded, 2375 sf.''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625b.png|'''Aspen expanded, 2500 sf + shed''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:skeleton2750.jpg|'''Aspen expanded, 2750, stick model.''' - Source is v2-Framing at [https://drive.google.com/drive/folders/1n-AyTpmoEPyDEbeftewyplJZPtUGPN8i]
</gallery>

==PV==
[[File:array.png|100px]][[File:rec315.png|100px]]
<gallery perrow=6>

File:rec315.png|'''315 W solar panels. ''' - [[File:rec315.fcstd]].

</gallery>

=Viewing=
*You can view online by downloading file, and uploading to http://www.sweethome3d.com/SweetHome3DOnlineManager.jsp. This is the floor, apparently using WebGL :

[[File:sh2floor.jpg|400px]]

*You can download SweetHome3D and view on your computer.

=Embedding=
Embedding of sh3d files doesn't work. There is an embedding capacity provided by SH3D online on their servers, but it can't be iframed in to existing webpages.

[[Category:Seed Eco-Home]]

=Links=
*[[Seed Home 2]]

File:RoofRiserAssembly.fcstd

2021-07-20T14:35:35Z

JET OOTO: JET OOTO uploaded a new version of File:RoofRiserAssembly.fcstd

File:RoofRiserAssembly.png

2021-07-20T14:24:12Z

JET OOTO:

Seed Home v2 3D CAD

2021-07-19T17:21:30Z

JET OOTO: /* Roof */

{{Hint|As of Dec 2020, the Rosebud model is the one we are building and releasing as our first product candidate.}}

=CAD for BOM Purposes + Lumber Cut Lists + Wall Aperture Details=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSj2QRIcmJDnAz3DvoOg3AILdrfiDrgY6ywEvZcEY55Wvn1bgaei1obAcIrDFdsJf2MMAW7e371glr0/embed?start=false&loop=false&delayms=3000#17" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1wWbj03CQgsJpq1TQaR3Ak9wdGK6av9ExfFlc8O-ER7I/edit#slide=id.gb344355f04_0_10 edit]

==Deprecated Floor Plan==
This doc is in preparation for generating accurate CAD. By thinking out the logic of the system carefully, we optimize for build efficiency and thus degenerate to a sound design, which is then CADded up.

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ4zmzecAHz_NkwZOdBRiSRAUn3H0E7Mtlydyzxdtp-8CKYvLWckc-eFV9Zsmptnrlo5MgRfav7cSGB/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1FQrn4a2RHaWLJeLwQl_-1XRXA9CRvvqNDQW-iJBcqV4/edit#slide=id.g5c3be0ce2d_1_28 edit]

=Seed Home 2 Part Library=
* Interior Walls - [[File:intwalls.sh3d.zip]]
*See [[Seed Home 2 Part Library]]
*[[Seed Home 2 Utility Panel 3D CAD]]

==CAD Detail Documents==

*[[Second Story Door]]

==Wall Modules in SweetHome3d (Structural Design) and FreeCAD (Complete Model)==
See parts of wall modules at [[Architecture Part Library]].

Module Map - Exterior Wall modules - 1-23 are on the first floor - 24-47 are on the second, and the rest are 48-59 for first floor interior modules, and 60-69 are second floor interior modules.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQe3GXvvIKz-3fsiO-R4iIDqlwWZysTXhsa0eK9Bx9ezC26KopU4Aj4pX1jw2_Wx5_IDGFGd9zs30W8/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1KRK3ti4N4kDHfRlniSUiLrpw_jmTOHT0VQGb7vFhU88/edit#slide=id.gd976d2a7e2_6_0 edit]

Note: files end in zip. After download, don't extract - just change filename to remove the .zip at the end and file will be openable in SweetHome3D. These can be upgraded in FreeCAD, the Sweet Home is a start.

These files are extracted from the SweetHome3D technical design file for structure of Seed Eco-Home 2 - [[Seed Eco-Home 2 Technical Design of Structure in SweetHome3D]]

[[File:houseassembly2.png|100px]][[File:seh2_firstfloor.png|100px]][[File:positionallycorrectmod1.png|100px]][[File:upperdoorupdate.png|100px]][[File:houseassemblymaster.png|100px]][[File:houselocation.png|100px]][[File:doorwindow2.png|100px]][[File:doorwindow.png|100px]][[File:adjustmentmodule8.png|100px]][[File:smallwindow3.png|100px]][[File:smallwindow2.png|100px]][[File:smallwindow.png|100px]][[File:frenchdoorexteriortrimdetail.png|100px]][[File:frenchdoorwithtrim.png|100px]][[File:seh2wall4freecad.png|100px]][[File:seh2wall1freecad.png|100px]][[File:seh2wall6.png|100px]][[File:seh2wall17.png|100px]][[File:seh2wall23.png|100px]][[File:seh2wall9.png|100px]][[File:seh2wall3rework4.png|100px]][[File:seh2wall3rework3.png|100px]][[File:seh2wall3rework2.png|100px]][[File:seh2wall3rework.png|100px]][[File:seh2wall22rework2.png|100px]][[File:seh2wall22rework.png|100px]][[File:seh2wall22.png|100px]][[File:seh2wall3.png|100px]][[File:seh2wall2.png|100px]][[File:seh2wall1.png|100px]]

<gallery perrow=6>

File:houseassembly2.png|'''House Assembly Master File.''' - FreeCAD - [[File:houseassemblymaster.fcstd]]

File:seh2_firstfloor.png|'''House Assembly First Floor Only''' - FreeCAD - [[File:seh2_firstfloor.fcstd]] Includes plumbing on slab [[File:Plumbing_on_slab.fcstd]]

File:houselocation.png|'''House Location Master File.''' - FreeCAD - [[File:houselocation.fcstd]]

File:doorwindow2.png|'''Door and window module for adjustment.''' - FreeCAD - [[File:doorwindow.fcstd]]

File:positionallycorrectmod1.png|'''Wall Module 1''' -SweetHome3D-[[File:seh2wall1.sh3d.zip]]- FreeCAD - [[File:seh2_wall_1.fcstd]]--[[Build Cheatsheet for Wall Module 1]].

File:seh2wall2.png|'''Wall Module 2''' -SweetHome3D-[[File:seh2wall2.sh3d.zip]]-- FreeCAD - [[File:seh2_wall_2.fcstd]] - -[[Build Cheatsheet for Wall Module 2]]

File:seh2wall3rework4.png|'''Wall Module 3''' -SweetHome3D-[[File:seh2_wall_3.sh3d.zip]] - FreeCAD -[[File:seh2_wall_3.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_3]]

File:seh2wall4freecad.png|'''Wall Module 4''' -SweetHome3D-[[File:seh2_wall_4.sh3d.zip]] - FreeCAD - [[File:seh2_wall_4.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_4]].

File:seh2wall5.png|'''Wall Module 5''' -SweetHome3D-[[File:seh2_wall_5.sh3d.zip]] -[[Build_Cheatsheet_for_Wall_Module_5]].- FreeCAD - [[File:seh2_wall_5.fcstd]] - Same as Wall Module 17 (opposite long side left corner)

File:seh2wall6.png|'''Wall Module 6''' -SweetHome3D-[[File:seh2_wall_6.sh3d.zip]] - FreeCAD - [[File:seh2_wall_6.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_6]]

File:seh2wall7.png|'''Wall Module 7''' -SweetHome3D-[[File:seh2_wall_7.sh3d.zip]] - FreeCAD - [[File:seh2_wall_7.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_7]]

File:adjustmentmodule8.png|'''Wall Module 8''' -SweetHome3D-[[File:seh2_wall_8.sh3d.zip]] - FreeCAD - [[File:seh2_wall_8.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_8]]. Adjustment module.

File:seh2wall9.png|'''Wall Module 9''' -SweetHome3D-[[File:seh2_wall_9.sh3d.zip]] - FreeCAD - [[File:seh2_wall_9.fcstd]] - [[Build_Cheatsheet_for_Wall_Module_9]]

File:seh2_wall_10.png|'''Wall Module 10''' -SweetHome3D-[[File:seh2_wall_10.sh3d.zip]] - FreeCAD - [[File:seh2_wall_10.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_10]]

File:Seh2 wall 11.png|'''Wall Module 11''' -SweetHome3D-[[File:seh2_wall_11.sh3d.zip]] - FreeCAD - [[File:seh2_wall_11.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_11]]

File:seh2wall12.png|'''Wall Module 12''' -SweetHome3D-[[File:seh2_wall_12.sh3d.zip]] - FreeCAD - [[File:seh2_wall_12.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_12]]. Structure same as Module 23.

File:seh2wall1freecad.png|'''Wall Module 13''' -SweetHome3D-[[File:seh2_wall_13.sh3d.zip]] - FreeCAD - [[File:seh2_wall_13.fcstd]] --[[Build_Cheatsheet_for_Wall_Module_13]]. Same as Wall 1 structure. But - Wall 1 has a hole for electrical.

File:seh2wall14.png|'''Wall Module 14''' -SweetHome3D-[[File:seh2_wall_14.sh3d.zip]] - FreeCAD - [[File:seh2_wall_14.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_14]]

File:seh2wall15.png|'''Wall Module 15''' -SweetHome3D-[[File:seh2_wall_15.sh3d.zip]] - FreeCAD - [[File:seh2_wall_15.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_15]]

File:Seh2wall16.png|'''Wall Module 16''' -SweetHome3D-[[File:seh2_wall_16.sh3d.zip]] - FreeCAD - [[File:seh2_wall_16.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_16]]. Same structure as Module 4.

File:seh2wall17.png|'''Wall Module 17''' -SweetHome3D-[[File:seh2_wall_17.sh3d.zip]] - FreeCAD - [[File:seh2_wall_17.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_17]]

File:smallwindow3.png|'''Wall Module 18''' -SweetHome3D-[[File:seh2_wall_18.sh3d.zip]] - FreeCAD - [[File:seh2_wall_18.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_18]]. 1st story window module.

File:smallwindow3.png|'''Wall Module 19''' -SweetHome3D-[[File:seh2_wall_19.sh3d.zip]] - FreeCAD - [[File:seh2_wall_19.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_19]]. First story window module. Structure same as 18.

File:Seh2wall20.png|'''Wall Module 20''' -SweetHome3D-[[File:seh2_wall_20.sh3d.zip]] - FreeCAD - [[File:seh2_wall_20.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_20]]

File:seh2_wall_21.png|'''Wall Module 21''' -SweetHome3D-[[File:seh2_wall_21.sh3d.zip]] - FreeCAD - [[File:seh2_wall_21.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_21]]

File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' -SweetHome3D-[[File:seh2_wall_22.sh3d.zip]] - FreeCAD -[[File:seh2_wall_22.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_22]]. Note: FreeCAD file is updated, SH3D is older.

File:seh2wall23.png|'''Wall Module 23''' -SweetHome3D-[[File:seh2_wall_23.sh3d.zip]] - FreeCAD -[[File:seh2_wall_23.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_23]]
</gallery>

==Second Floor Exterior==

<gallery perrow=6>

File:seh2_8ft_panel.png|'''Full panel''' - FreeCAD Detail-[[File:seh2_8ft_panel.fcstd]] Modules 25,29,30,31,33,34,37,38,43 & 44

File:seh2_8ft_short_left_corner.png|'''Short left corner''' - FreeCAD Detail-[[File:seh2_8ft_short_left_corner.fcstd]] Modules 24 & 36

File:seh2_8ft_short_right_corner.png|'''Short right corner''' - FreeCAD Detail-[[File:seh2_8ft_short_right_corner.fcstd]] Modules 27 & 39

File:seh2_8ft_long_left_corner.png|'''Long left corner''' - FreeCAD Detail-[[File:seh2_8ft_long_left_corner.fcstd]] Modules 28 & 40

File:seh2_8ft_long_right_corner.png|'''Long right corner''' - FreeCAD Detail-[[File:seh2_8ft_long_right_corner.fcstd]] Modules 35 & 47

File:seh2_8ft_window.png|'''Window''' - FreeCAD Detail-[[File:seh2_8ft_window.fcstd]] Modules 41, 42, 45 & 46 (Note: this has siding over entire panel including window)

</gallery>

(Note: SweetHome3D starts 2nd floor numbering at #25 (SH3D #25 is 2nd Floor Wall Module #24, etc)

<gallery perrow=6>

File:seh2_8ft_short_left_corner.png|'''Wall Module 24''' -SweetHome3D-[[File:seh2_wall_25.sh3d.zip]] FreeCAD-[[File:seh2_wall_24.fcstd]] [[Build_Cheatsheet_for_Wall_Module_24]]

File:seh2_8ft_panel.png|'''Wall Module 25''' -SweetHome3D-[[File:seh2_wall_26.sh3d.zip]] - FreeCAD -[[File:seh2_wall_25.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_25]]

File:Upperdoorupdate.png|'''Wall Module 26 - second story door.''' -SweetHome3D-[[File:seh2_wall_27.sh3d.zip]] - FreeCAD -[[File:seh2_wall_26.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_26]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 27''' -SweetHome3D-[[File:seh2_wall_28.sh3d.zip]] - FreeCAD - [[File:seh2_wall_27.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_27]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 28''' -SweetHome3D-[[File:seh2_wall_29.sh3d.zip]] - FreeCAD -[[File:seh2_wall_28.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_28]]

File:seh2_8ft_panel.png|'''Wall Module 29''' -SweetHome3D-[[File:seh2_wall_30.sh3d.zip]] FreeCAD-[[File:seh2_wall_29.fcstd]] [[Build_Cheatsheet_for_Wall_Module_29]]

File:seh2_8ft_panel.png|'''Wall Module 30''' -SweetHome3D-[[File:seh2_wall_31.sh3d.zip]] FreeCAD-[[File:seh2_wall_30.fcstd]] [[Build_Cheatsheet_for_Wall_Module_30]]

File:seh2_8ft_panel.png|'''Wall Module 31''' -SweetHome3D-[[File:seh2_wall_32.sh3d.zip]] - FreeCAD -[[File:seh2_wall_31.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_31]]

File:seh2wall32.png|'''Wall Module 32''' -SweetHome3D-[[File:seh2_wall_33.sh3d.zip]] - FreeCAD -[[File:seh2_wall_32.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_32]]

File:seh2_8ft_panel.png|'''Wall Module 33''' -SweetHome3D-[[File:seh2_wall_34.sh3d.zip]] - FreeCAD -[[File:seh2_wall_33.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_33]]

File:seh2_8ft_panel.png|'''Wall Module 34''' -SweetHome3D-[[File:seh2_wall_35.sh3d.zip]] - FreeCAD -[[File:seh2_wall_34.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_34]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 35''' -SweetHome3D-[[File:seh2_wall_36.sh3d.zip]] - FreeCAD -[[File:seh2_wall_35.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_35]]

File:seh2_8ft_short_left_corner.png|'''Wall Module 36''' -SweetHome3D-[[File:seh2_wall_37.sh3d.zip]] - FreeCAD -[[File:seh2_wall_36.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_36]]

File:seh2_8ft_panel.png|'''Wall Module 37''' -SweetHome3D-[[File:seh2_wall_38.sh3d.zip]] - FreeCAD -[[File:seh2_wall_37.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_37]]

File:seh2_8ft_panel.png|'''Wall Module 38''' -SweetHome3D-[[File:seh2_wall_39.sh3d.zip]] - FreeCAD -[[File:seh2_wall_38.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_38]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 39''' -SweetHome3D-[[File:seh2_wall_40.sh3d.zip]] - FreeCAD -[[File:seh2_wall_39.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_39]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 40''' -SweetHome3D-[[File:seh2_wall_41.sh3d.zip]] - FreeCAD -[[File:seh2_wall_40.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_40]]

File:seh2wall41.png|'''Wall Module 41''' -SweetHome3D-[[File:seh2_wall_42.sh3d.zip]] - FreeCAD -[[File:seh2_wall_41.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_41]]

File:seh2wall42.png|'''Wall Module 42''' -SweetHome3D-[[File:seh2_wall_43.sh3d.zip]] - FreeCAD -[[File:seh2_wall_42.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_42]]

File:seh2_8ft_panel.png|'''Wall Module 43''' -SweetHome3D-[[File:seh2_wall_44.sh3d.zip]] - FreeCAD -[[File:seh2_wall_43.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_43]]

File:seh2_8ft_panel.png|'''Wall Module 44''' -SweetHome3D-[[File:seh2_wall_45.sh3d.zip]] - FreeCAD -[[File:seh2_wall_44.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_44]]

File:seh2_8ft_window.png|'''Wall Module 45''' -SweetHome3D-[[File:seh2_wall_46.sh3d.zip]] - FreeCAD -[[File:seh2_wall_45.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_45]]

File:seh2_8ft_window.png|'''Wall Module 46''' -SweetHome3D-[[File:seh2_wall_47.sh3d.zip]] - FreeCAD -[[File:seh2_wall_46.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_46]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 47''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_47.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_47]]

</gallery>

==First Floor Interior==

<gallery perrow=6>

File:seh2_9ft_interior.png|'''Full 2x4 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_interior.fcstd]]

File:seh2_9ft_2x6_interior.png|'''Full 2x6 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_2x6_interior.fcstd]]

File:seh2wall48.png|'''Wall Module 48''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_48.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_48]]

File:seh2wall49.png|'''Wall Module 49''' -SweetHome3D-[[File:seh2_wall_49.sh3d.zip]] - FreeCAD -[[File:seh2_wall_49.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_49]]

File:seh2wall50.png|'''Wall Module 50''' -SweetHome3D-[[File:seh2_wall_50.sh3d.zip]] - FreeCAD -[[File:seh2_wall_50.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_50]]

File:seh2wall51.png|'''Wall Module 51''' -SweetHome3D-[[File:seh2_wall_51.sh3d.zip]] - FreeCAD -[[File:seh2_wall_51.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_51]]

File:seh2wall52.png|'''Wall Module 52''' -SweetHome3D-[[File:seh2_wall_52.sh3d.zip]] - FreeCAD -[[File:seh2_wall_52.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_52]]

File:laundry.png|'''Wall Module 55 (Laundry)''' - FreeCAD -[[File:Laundry.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_55]]

File:seh2wall56.png|'''[[Wall Module 56]]''' -SweetHome3D - [https://drive.google.com/file/d/16dmPzyMUUcRUyOfgH4Kv7yQOHTJ2IEDz/view?usp=sharing] - FreeCAD -[[File:seh2_wall_56.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_56]]

File:seh2wall57.png|'''Wall Module 57''' -SweetHome3D-[[File:seh2_wall_57.sh3d.zip]] - FreeCAD -[[File:seh2_wall_57.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_57]]

File:seh2wall58.png|'''Wall Module 58''' -SweetHome3D-[[File:seh2_wall_58.sh3d.zip]] - FreeCAD -[[File:seh2_wall_58.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_58]]

File:seh2wall59.png|'''Wall Module 59''' -SweetHome3D-[[File:seh2_wall_59.sh3d.zip]] - FreeCAD -[[File:seh2_wall_59.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_59]]

</gallery>

==Second Floor Interior==
[[File:seh2_8ft_interior_door.png|100px]][[File:seh2_8ft_interior.png|100px]][[File:seh2wall63-4.png|100px]][[File:seh2wall64.png|100px]][[File:seh2wall63-3.png|100px]][[File:seh2wall63.png|100px]]

<gallery>
File:seh2_8ft_interior.png|'''Full interior panel''' - FreeCAD Detail-[[File:seh2_8ft_interior.fcstd]]

File:seh2_8ft_interior_door.png|'''Interior door''' - FreeCAD Detail-[[File:seh2_8ft_interior_door.fcstd]] (38x83 rough opening)

File:seh2wall60.png|'''Wall Module 60''' [[:File:seh2_wall_60.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_60.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_60|Build Cheatsheet]]

File:seh2wall61.png|'''Wall Module 61'''<br/>[[:File:seh2_wall_61.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_61.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_61|Build Cheatsheet]]

File:seh2wall62.png|'''[[Wall Module 62]]''' -SweetHome3D-[[File:seh2_wall_62.sh3d.zip]] - FreeCAD - [[File:seh2_wall_62.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_62]]

File:seh2wall63-4.png|'''Wall Module 63'''-SweetHome3D-[[File:seh2_wall_63.sh3d.zip]] - FreeCAD - [[File:seh2_wall_63.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_63]]

File:seh2wall64.png|'''Wall Module 64'''-SweetHome3D-[[File:seh2_wall_64.sh3d.zip]] - FreeCAD - [[File:seh2_wall_64.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_64]]

File:seh2_8ft_interior_door.png|'''[[Wall Module 65]]'''- Interior Door -SweetHome3D-[[File:seh2_wall_65.sh3d.zip]] - FreeCAD - [[File:seh2_wall_65.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_65]]

File:seh2wall66.png|'''Wall Module 66'''-SweetHome3D-[[File:seh2_wall_66.sh3d.zip]] - FreeCAD - [[File:seh2_wall_66.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_66]]

File:seh2_8ft_interior.png|'''Wall Module 67'''<br/>[[:File:seh2_wall_67.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_67.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_67|Build Cheatsheet]]

File:Seh2wall68.png|'''Wall Module 68'''<br/> [[:File:seh2_wall_68.sh3d.zip|SweetHome 3D]]<br/>[[:File:seh2_wall_68.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_68|Build Cheatsheet]]<br/>[https://github.com/cryptogoth/freecad-python/blob/main/Panel-Workbench/PanelsGui.py#L80 Python Workbench Code]

File:seh2wall69.png|'''Wall Module 69'''-SweetHome3D-[[File:seh2_wall_69.sh3d.zip]] - FreeCAD - [[File:seh2_wall_69.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_69]]
</gallery>

==Select Details==

[[File:blockingdetail2.png|100px]][[File:blockingdetail.png|100px]][[File:southwalldetail3.png|100px]][[File:southwalldetail2.png|100px]][[File:southwalldetail.png|100px]][[File:SEH2stairs.png|100px]][[File:stringerless.png|100px]][[File:toptrim6.png|100px]][[File:toptrim5.png|100px]][[File:toptrim4.png|100px]][[File:toptrim2.png|100px]][[File:toptrim.png|100px]][[File:roofdetail.png|100px]]

<gallery>

File:blockingdetail2.png|"First Floor Ceiling Detail. "- FreeCAD - [[File:blockingdetail.fcstd]]

File:southwalldetail3.png|"South wall detail. "- FreeCAD - [[File:southwalldetail.fcstd]]

File:SEH2stairs.png|"Stringerless stairs for SEH 2. "- FreeCAD - [[File:SEH2stairs.fcstd]]

File:stringerless.png|"Stringerless stairs concept. "- FreeCAD - [[File:stringerless.fcstd]]

File:toptrim5.png|"Top wall trim. "- FreeCAD - [[File:toptrim.fcstd]]

File:roofdetail.png|"Roof Detail. "- FreeCAD - [[File:roofdetail.fcstd]].

</gallery>

==Second Story Platform==

[[File:secondstoryfloor4.png|100px]][[File:secondstoryfloor3.png|100px]][[File:secondstoryfloor2.png|100px]][[File:secondstoryfloor.png|100px]]

<gallery>

File:secondstoryfloor3.png|'''[[Second Story Floor Platform]]''' - FreeCAD - [[File:secondstoryfloor.fcstd]].

</gallery>

==Roof==

<gallery>

File:RoofRiserAssembly.png|'''Roof Riser Assembly''' - FreeCAD - [[File:RoofRiserAssembly.fcstd]].
File:RoofInsulationBox.png|"Roof Insulation Box. "- FreeCAD - [[File:RoofInsulationBox.FCStd]].
File:RoofInsulationBox_0.5inch.png|"Roof Insulation Box - 0.5-inch. "- FreeCAD - [[File:RoofInsulationBox_0.5inch.FCStd]].

</gallery>

[[File:SecondStoryRoof.fcstd]] [[File:RoofRiserAssembly.fcstd]]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ49OCEr3Sl6YKudBd2MbOAU0Kvx6XPX2lFX_2BiG32Bv4hOUnP1ONTImI7IlKT0d1jpA5sFwxi0-ms/embed?start=false&loop=false&delayms=3000#slide=id.gc9334e75e1_0_2" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1N1lS8RBMy0Y0JnR_h1tz23CYFoR5zespNG4T5m4nnZE/edit#slide=id.gc9334e75e1_0_2 edit]

=Catarina's Source Google Drive, Sweet Home 3D Files=

*Laundry module - [https://drive.google.com/file/d/1zjWbmlwpjXy4DUW1xlzSzDnDrqDglsUs/view?usp=sharing]
*Drive, OBI Models - [https://drive.google.com/drive/folders/0B0NG-lv1ELQvdE9xSGZEeWR3Mm8]
**'''CAD, Rosebud, Working Model as of 5/14/21''' [https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view?usp=sharing]
**'''CAD, Supporting Rosebud Model Files''' - [https://drive.google.com/drive/folders/1ELOrXeIenMNjfYwr6g5HUqoNjGqA38DF]
*Building Book - [Technical designs are found in the Building Book - [https://drive.google.com/drive/folders/1SZrTCkX9S_L8JSD_Dq_xeLDM53MP2vZq]
*Shower drain kit - dimensions - [https://images.homedepot-static.com/catalog/pdfImages/cd/cd10c1ce-fd8e-4efc-8415-60dc104f5090.pdf]

'''Visual History:'''

[[File:staironly.png|100px]][[File:floorandroof.png|100px]][[File:stairs2.png|100px]][[File:stairs.png|100px]][[File:staircase.png|100px]][[File:rooflayers.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:staironly.png|'''Stairs only, 1/10 scale.''' - FreeCAD - [[File:staironly.fcstd]].

File:rooflayers.png|'''Roof layers.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

File:staircase.png|'''Staircase. Technical detail.''' - SweetHome3D -[https://drive.google.com/file/d/1t9PQIM0JRXRPsQ6aqhsMETB53VRYnqgL/view?usp=sharing].

File:stairs.png|'''Stairs. Early concept detail.''' - SweetHome3D -[https://drive.google.com/file/d/1HFNCDa2t4rpEKunZowZ8d9cRtb9EF2li/view?usp=sharing].

File:stairs2.png|'''Stairs. Correct for Aspen.''' - SweetHome3D -[https://drive.google.com/file/d/1-X9sJiHt2KS7ZrOPAeNj0VC2UQlKELNT/view?usp=sharing].

File:floorandroof.png|'''Technical of floor and roof.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

</gallery>

=Concept Modules=

==Part Library==

'''Visual History:'''

[[File:2ndfloorwithbands.png|100px]][[File:trellisonly.png|100px]][[File:bandconcept.png|100px]][[File:overhangrework2.png|100px]][[File:overhangrework.png|100px]][[File:overhang.png|100px]][[File:2ndfloorwithband.png|100px]][[File:firstfloorconcept.png|100px]][[File:secondfloorconcept.png|100px]]

'''Gallery:'''

<gallery perrow=6>
File:2ndfloorwithbands.png|'''Second floor concept with bands.''' - FreeCAD -[[File:2ndfloorwithbands.fcstd]].

File:overhangrework2.png|'''Overhang band - rework from rough underlying shape..''' - FreeCAD -[[File:overhangrework.fcstd]].

File:trellisonly.png|'''Overhang band - detail, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:trellisonly.fcstd]].

File:2ndfloorwithband.png|'''Second floor with band concept, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:2ndfloorwithband.fcstd]].

File:firstfloorconcept.png|'''First floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/first_floor.fcstd].

File:secondfloorconcept.png|'''Second floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/2nd.fcstd].

</gallery>

=Technical Modules=
==Stair Design==
#Please download SweetHome3D to view this file - https://drive.google.com/file/d/1X7H-kKLtFZrs0y3Qwq7GYdgxnL4wskm5/view?usp=sharing
#Determine the correct stair height, and then the landing is like in this concept model - https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view
#Then do the staircase in FreeCAD, which I started here - https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

[[File:stairstringer2.png|100px]][[File:stairstringer.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' Generate technical drawing with TechDraw. FreeCAD -[[File:stairstringer.fcstd]].

</gallery>

=House Build=

Starting with foundation, to bathroom, walls.

[[File:rosebudplumbing2.png|100px]][[File:addedbathtofound.png|100px]][[File:addedholetofound.png|100px]][[File:sillplate7.png|100px]][[File:mudsillanchor2.png|100px]][[File:mudsillanchor.png|100px]][[File:sillplate6.png|100px]][[File:sillplate5.png|100px]][[File:sillplate4.png|100px]][[File:sillplate3.png|100px]][[File:sillplate.png|100px]][[File:2inchinsulation.png|100px]][[File:Baseslab.png|100px]]

<gallery perrow=6>

File:rosebudplumbing.png|'''Rosebud plumbing.''' - FreeCAD - [[File:rosebudplumbing.fcstd]]
File:sillplate7.png|'''Foundation only.''' Note this file has entire sill detail including cement board, flexible vinyl flashing, sill gasket, and ramset boards under doors. Next file continues with the plumbing detail. FreeCAD -[[File:foundationonly.fcstd]]
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]

</gallery>

=Top Plate, Ceiling, Roof=
[[File:roof.png|100px]][[File:ceiling.png|100px]][[File:rosebudtopplate.png|100px]]
<gallery perrow=6>

File:roof.png |'''Rosebud roof.''' All individual parts. Correct shape, stair location not present. - FreeCAD -[[File:roof.FCStd]].

File:ceiling.png|'''Rosebud ceiling.''' - FreeCAD -[[File:ceiling.FCStd]]. '''Deprecated. Newer above.'''

File:rosebudtopplate.png|'''Rosebud top plate.''' - FreeCAD -[[File:rosebudtoplate.FCStd]].

</gallery>

=Wall Modules - LOD 400-500=
Note: for BOM-ready files, Master Module file includes clones for memory management and simplified view within Part Tree. Sample BOM file - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]. '''Missing from BOM file''' - R38 roof insulation, roof ceiling, interior framing, interior insulation. See BOM spreadsheet - [https://docs.google.com/spreadsheets/d/1mxd28_UTffkYQDfi8vPDwGrSyvsTUFg2UACXwgo7wGc/edit#gid=0] generated from FreeCAD BOM test file for first and second floor of house - not including garage - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]

[[File:8footwindow5.png|100px]][[File:8footwindow4.png|100px]][[File:ddfinal.png|100px]][[File:ddplaceholder.png|100px]][[File:8footwall2.png|100px]][[File:8footwall.png|100px]][[File:9footmediumwindow4.png|100px]][[File:singledoormaster9.png|100px]][[File:SAWP.png|100px]][[File:doorsilltape.png|100px]][[File:dripcaptape.png|100px]][[File:dripcap.png|100px]][[File:9footdoorframe4.png.png|100px]][[File:9footdoorframe3.png.png|100px]][[File:9footdoubledoorplaceholder.png|100px]][[File:9footdoubledoor2.png|100px]][[File:9footdoubledooronly.png|100px]][[File:9footdoubledoor.png|100px]][[File:9footmediumwindow3.png|100px]][[File:9footmediumwindow2.png|100px]][[File:9footmediumwindowonly.png|100px]][[File:9footmediumwindow.png|100px]][[File:firstfloorwithdoor.png|100px]][[File:9footdoorframe2.png|100px]][[File:9footdoorframe.png|100px]][[File:9footdoor.png|100px]][[File:9footwalls132.png|100px]][[File:9footwalls13.png|100px]][[File:9footwall12panels.png|100px]][[File:9footwall2.png|100px]][[File:9footwall.png|100px]]

<gallery perrow=6>

File:8footwall2.png|'''8 Foot Wall Panel.''' - FreeCAD -[[File:8footwall.FCStd]].

File:8footwindow4.png|'''8 Foot Large Window Panel. Pseudo, with med window and 9' studs.''' - FreeCAD -[[File:8footwindow.FCStd]].

File:9footwall2.png|'''9 Foot Wall''' - FreeCAD -[[File:9footwall.FCStd]].

File:singledoormaster9.png|'''9 Foot Single Door Master.''' - FreeCAD -[[File:9footdoorpanel.FCStd]].

File:ddfinal.png|'''9 Foot Double Door.''' - FreeCAD -[[File:9footdoubledoor.FCStd]].

File:ddplaceholder.png|'''9 Foot Double Door placeholder.''' - FreeCAD -[[File:9footdoubledoorplaceholder.FCStd]].

File:9footmediumwindow4.png|'''9 Foot Medium Window Panel.''' - FreeCAD -[[File:9footmediumwindow.FCStd]].

</gallery>
==Assemblies==
<gallery perrow=6>

File:firstfloorwithdoor.png|'''9 Foot Walls'''. - FreeCAD -[[File:9footwalls.FCStd]].

File:seh2secondfloor.png|'''Second Floor''' - FreeCAD - [[File:seh2secondfloor.fcstd]]

</gallery>

==Wall Parts==
<gallery perrow=6>

File:largewindow.png|'''Large window.''' - FreeCAD -[[File:largewindowonly.FCStd]].

File:9footdoubledooronly.png|'''9 Foot Double Door only.''' - FreeCAD -[[File:9footdoubledooronly.FCStd]].

File:9footmediumwindowonly.png|'''9 Foot Medium Window pane.''' - FreeCAD -[[File:9footmediumwindowonly.FCStd]].

File:9footdoor.png|'''9 Foot Door, door only, single.''' - FreeCAD -[[File:9footdoor.FCStd]]. Source SweetHome folder - [https://drive.google.com/drive/folders/180KINsLnK6vUlcnhCgAyzDThc-vlaV1G].

</gallery>

=Plumbing Rough-In=

Note: due to local variations - the actual CAD must reconcile against materials used ([https://photos.app.goo.gl/6Mu2gsXhC9jhsi82A]) and the data collection from annotated PVC pictures at [https://photos.app.goo.gl/8Jqt4scFkxHnM8d59]. This is proper CAD-BOM-Reality reconciliation required for a full digital model.

[[File:secondfloortoilet.png|100px]][[File:bathroomonly2.png|100px]][[File:bathroomonly.png|100px]][[File:foundationonly.png|100px]][[File:wallstarting.png|100px]][[File:finishingplumbing.png|100px]][[File:3sweepelbow.png|100px]][[File:continuinghouse.png|100px]][[File:grading.png|100px]][[File:sinkdrain.png|100px]][[File:tuscany.png|100px]][[File:toilet.png|100px]][[File:drain.png|100px]][[File:cuttrapbottom.png|100px]][[File:cuttraptop.png|100px]][[File:15trap.png|100px]][[File:house3.png|100px]][[File:house2.png|100px]][[File:house.png|100px]][[File:bathroomonslab.png|100px]][[File:drainkit4.png|100px]][[File:drainkit3.png|100px]][[File:drainkit2.png|100px]][[File:drainkit.png|100px]][[File:15elbow.png|100px]]

<gallery perrow=6>

File:secondfloortoilet.png|'''Second Floor Toilet Beginning.'''. FreeCAD -[[File:secondfloortoilet.fcstd]]

File:bathroomonly.png|'''Plumbing on slab.''' This can be merged with foundation. FreeCAD -[[File:Plumbing_on_slab.fcstd]]

File:3sweepelbow.png |'''3" sweep elbow for toilet.''' - FreeCAD -[[File:3sweepelbow.fcstd]]

File:grading.png |'''House drainage slope.''' Codes say 6" over 10'. - FreeCAD -[[File:grading.fcstd]]

File:tuscany.png |'''Tuscany toilet.''' - FreeCAD -[[File:tuscany.fcstd]]

File:cuttraptop.png |'''Cut trap bottom, 1.5".''' - FreeCAD -[[File:cuutrapbottom.fcstd]]

File:cuttrapbottom.png |'''Cut trap top, 1.5".''' - FreeCAD -[[File:cuutraptop.fcstd]]

File:15trap.png |'''1.5" PVC Trap.''' - FreeCAD -[[File:15trap.fcstd]]

File:bathroomonslab.png |'''Bathroom on slab.''' - FreeCAD -[[File:bathroomonslab.fcstd]]

File:drainkit4.png |'''Tub drain kit''' - FreeCAD -[[File:tubdrainkit.fcstd]]

File:15elbow.png |'''1.5" elbow''' - FreeCAD -[[File:15elbow.fcstd]]
</gallery>

==BOM==
*4x3 closet bend is recommended [https://terrylove.com/forums/index.php?threads/4x3-inch-closet-bend-or-3-inch-closet-bend.2826/] - so get one at [https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/pvc-fittings/pvc-dwv-fittings/nibco-reg-4x3-closet-elbow-pvc-dwv/p-1444449182622-c-9383.htm]

=Links=
*[[Seed Home v2 3D CAD]]

=Part Library=
[[File:rosebudwalls.png|100px]][[File:spipe.png|100px]][[File:rosebudcore.png|100px]]
[[File:rosebudexp.png|100px]]
[[File:rosebudfound.png|100px]]

Aspen 1 has corridor in front, Aspen 2 in the back. Rosebud is the simplehut.
=Walls - Deprecated=

<gallery perrow=6>
File:rosebudwalls.png|'''Seed Home 2 - Rosebud, walls.''' - FreeCAD - [[File:rosebudwalls.FCStd]].

File:sh2house.png|'''Seed Home 2, Aspen.''' - FreeCAD - [[File:sh2house.FCStd]]. SweetHome3D - [[File:sh2house.zip]]

File:sh2wall.png|'''Seed Home 2 Wall.''' - FreeCAD - [[File:sh2wall.FCStd]]. SweetHome3D - [[File:sh2wall.zip]]

File:sh2door.png|'''Seed Home 2 Door.''' - FreeCAD - [[File:sh2door.FCStd]]. SweetHome3D - [[File:sh2door.zip]]

File:sh2doubledoor.png|'''Seed Home 2 Double Door.''' - FreeCAD - [[File:sh2doubledoor.FCStd]]. SweetHome3D - [[File:sh2doubledoor.zip]]. Source folder - [https://drive.google.com/file/d/1Dbe4lVsE6RyOJUEu4zBhKTfNbJgmNreG/view?usp=sharing]

File:sh2window1.png|'''Seed Home 2 Window 1.''' - FreeCAD - [[File:sh2window1.FCStd]]. SweetHome3D - [[File:sh2window1.zip]]

File:sh2upperroof.png|'''Seed Home 2 Upper Roof.''' - FreeCAD - [[File:sh2upperroof.FCStd]]. SweetHome3D - [[File:sh2upperroof.zip]]

File:sh2lowerroof.png|'''Seed Home 2 Lower Roof.''' - FreeCAD - [[File:sh2lowerroof.FCStd]]. SweetHome3D - [[File:sh2lowerroof.zip]]

File:sh2topplate.png|'''Seed Home 2 Top Plate.''' - FreeCAD - [[File:sh2topplate.FCStd]]. SweetHome3D - [[File:sh2topplate.zip]]

File:sh2uppersheath.png|'''Seed Home 2 Upper Sheathing.''' - FreeCAD - [[File:sh2uppersheath.FCStd]]. SweetHome3D - [[File:sh2uppersheath.zip]]

File:sh2walls.png|'''Seed Home 2 walls.''' - FreeCAD -[[File:sh2walls.FCStd]]. SweetHome3D -[[File:sh2walls.zip]]

File:slab.png|'''Seed Home 2 slab.''' - FreeCAD -[[File:sh2slab.FCStd]]
File:sh2sill.png|'''Seed Home 2 Sill Plate.''' - FreeCAD -[[File:sh2sill.FCStd]]
</gallery>

==Foundation==

See also integration of bathroom for initial plumbing stub-out - [[Shower Part Library]]

<gallery perrow=6>

File:rosebudcore.png|'''Rosebud core. 1000 sf.''' - [[File:rosebud.fcstd]]. Source in Sweet Home 3D - [https://drive.google.com/file/d/1VDnPYKoQJsf5yr0xyyQ423YPzs2y9lKU/view?usp=sharing].

File:rosebudexp.png|'''Rosebud expansion, 2000 sf + garage.''' - [[File:rosebudexp.fcstd]]. Source in SH3D - [https://drive.google.com/file/d/1aifP3eyP0CqmHlb1nwnHdPJuk2dzCGfL/view?usp=sharing]

File:rosebudfound.png|'''Rosebud foundation.''' Deprecated. Use the one from the plumbing rough-in. [[File:rosebudfound.fcstd]]

File:aspen.jpg|'''Aspen model of the Seed Home, 1000 sf.''' - FreeCAD -[[File:asepn.FCStd]]. Source is SH2Technical-Aspen1-Expansion2A.sh3d file at [https://drive.google.com/drive/folders/15k8MlWTz3yMVvIeZYAeOJVm54pB8noHM]

File:aspen2500.png|'''Aspen expanded, 2250 sf + sunroom''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625.png|'''Aspen expanded, 2375 sf.''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625b.png|'''Aspen expanded, 2500 sf + shed''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:skeleton2750.jpg|'''Aspen expanded, 2750, stick model.''' - Source is v2-Framing at [https://drive.google.com/drive/folders/1n-AyTpmoEPyDEbeftewyplJZPtUGPN8i]
</gallery>

==PV==
[[File:array.png|100px]][[File:rec315.png|100px]]
<gallery perrow=6>

File:rec315.png|'''315 W solar panels. ''' - [[File:rec315.fcstd]].

</gallery>

=Viewing=
*You can view online by downloading file, and uploading to http://www.sweethome3d.com/SweetHome3DOnlineManager.jsp. This is the floor, apparently using WebGL :

[[File:sh2floor.jpg|400px]]

*You can download SweetHome3D and view on your computer.

=Embedding=
Embedding of sh3d files doesn't work. There is an embedding capacity provided by SH3D online on their servers, but it can't be iframed in to existing webpages.

[[Category:Seed Eco-Home]]

=Links=
*[[Seed Home 2]]

Seed Home v2 3D CAD

2021-07-19T16:20:02Z

JET OOTO: /* Roof */

{{Hint|As of Dec 2020, the Rosebud model is the one we are building and releasing as our first product candidate.}}

=CAD for BOM Purposes + Lumber Cut Lists + Wall Aperture Details=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSj2QRIcmJDnAz3DvoOg3AILdrfiDrgY6ywEvZcEY55Wvn1bgaei1obAcIrDFdsJf2MMAW7e371glr0/embed?start=false&loop=false&delayms=3000#17" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1wWbj03CQgsJpq1TQaR3Ak9wdGK6av9ExfFlc8O-ER7I/edit#slide=id.gb344355f04_0_10 edit]

==Deprecated Floor Plan==
This doc is in preparation for generating accurate CAD. By thinking out the logic of the system carefully, we optimize for build efficiency and thus degenerate to a sound design, which is then CADded up.

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ4zmzecAHz_NkwZOdBRiSRAUn3H0E7Mtlydyzxdtp-8CKYvLWckc-eFV9Zsmptnrlo5MgRfav7cSGB/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1FQrn4a2RHaWLJeLwQl_-1XRXA9CRvvqNDQW-iJBcqV4/edit#slide=id.g5c3be0ce2d_1_28 edit]

=Seed Home 2 Part Library=
* Interior Walls - [[File:intwalls.sh3d.zip]]
*See [[Seed Home 2 Part Library]]
*[[Seed Home 2 Utility Panel 3D CAD]]

==CAD Detail Documents==

*[[Second Story Door]]

==Wall Modules in SweetHome3d (Structural Design) and FreeCAD (Complete Model)==
See parts of wall modules at [[Architecture Part Library]].

Module Map - Exterior Wall modules - 1-23 are on the first floor - 24-47 are on the second, and the rest are 48-59 for first floor interior modules, and 60-69 are second floor interior modules.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQe3GXvvIKz-3fsiO-R4iIDqlwWZysTXhsa0eK9Bx9ezC26KopU4Aj4pX1jw2_Wx5_IDGFGd9zs30W8/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1KRK3ti4N4kDHfRlniSUiLrpw_jmTOHT0VQGb7vFhU88/edit#slide=id.gd976d2a7e2_6_0 edit]

Note: files end in zip. After download, don't extract - just change filename to remove the .zip at the end and file will be openable in SweetHome3D. These can be upgraded in FreeCAD, the Sweet Home is a start.

These files are extracted from the SweetHome3D technical design file for structure of Seed Eco-Home 2 - [[Seed Eco-Home 2 Technical Design of Structure in SweetHome3D]]

[[File:houseassembly2.png|100px]][[File:seh2_firstfloor.png|100px]][[File:positionallycorrectmod1.png|100px]][[File:upperdoorupdate.png|100px]][[File:houseassemblymaster.png|100px]][[File:houselocation.png|100px]][[File:doorwindow2.png|100px]][[File:doorwindow.png|100px]][[File:adjustmentmodule8.png|100px]][[File:smallwindow3.png|100px]][[File:smallwindow2.png|100px]][[File:smallwindow.png|100px]][[File:frenchdoorexteriortrimdetail.png|100px]][[File:frenchdoorwithtrim.png|100px]][[File:seh2wall4freecad.png|100px]][[File:seh2wall1freecad.png|100px]][[File:seh2wall6.png|100px]][[File:seh2wall17.png|100px]][[File:seh2wall23.png|100px]][[File:seh2wall9.png|100px]][[File:seh2wall3rework4.png|100px]][[File:seh2wall3rework3.png|100px]][[File:seh2wall3rework2.png|100px]][[File:seh2wall3rework.png|100px]][[File:seh2wall22rework2.png|100px]][[File:seh2wall22rework.png|100px]][[File:seh2wall22.png|100px]][[File:seh2wall3.png|100px]][[File:seh2wall2.png|100px]][[File:seh2wall1.png|100px]]

<gallery perrow=6>

File:houseassembly2.png|'''House Assembly Master File.''' - FreeCAD - [[File:houseassemblymaster.fcstd]]

File:seh2_firstfloor.png|'''House Assembly First Floor Only''' - FreeCAD - [[File:seh2_firstfloor.fcstd]] Includes plumbing on slab [[File:Plumbing_on_slab.fcstd]]

File:houselocation.png|'''House Location Master File.''' - FreeCAD - [[File:houselocation.fcstd]]

File:doorwindow2.png|'''Door and window module for adjustment.''' - FreeCAD - [[File:doorwindow.fcstd]]

File:positionallycorrectmod1.png|'''Wall Module 1''' -SweetHome3D-[[File:seh2wall1.sh3d.zip]]- FreeCAD - [[File:seh2_wall_1.fcstd]]--[[Build Cheatsheet for Wall Module 1]].

File:seh2wall2.png|'''Wall Module 2''' -SweetHome3D-[[File:seh2wall2.sh3d.zip]]-- FreeCAD - [[File:seh2_wall_2.fcstd]] - -[[Build Cheatsheet for Wall Module 2]]

File:seh2wall3rework4.png|'''Wall Module 3''' -SweetHome3D-[[File:seh2_wall_3.sh3d.zip]] - FreeCAD -[[File:seh2_wall_3.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_3]]

File:seh2wall4freecad.png|'''Wall Module 4''' -SweetHome3D-[[File:seh2_wall_4.sh3d.zip]] - FreeCAD - [[File:seh2_wall_4.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_4]].

File:seh2wall5.png|'''Wall Module 5''' -SweetHome3D-[[File:seh2_wall_5.sh3d.zip]] -[[Build_Cheatsheet_for_Wall_Module_5]].- FreeCAD - [[File:seh2_wall_5.fcstd]] - Same as Wall Module 17 (opposite long side left corner)

File:seh2wall6.png|'''Wall Module 6''' -SweetHome3D-[[File:seh2_wall_6.sh3d.zip]] - FreeCAD - [[File:seh2_wall_6.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_6]]

File:seh2wall7.png|'''Wall Module 7''' -SweetHome3D-[[File:seh2_wall_7.sh3d.zip]] - FreeCAD - [[File:seh2_wall_7.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_7]]

File:adjustmentmodule8.png|'''Wall Module 8''' -SweetHome3D-[[File:seh2_wall_8.sh3d.zip]] - FreeCAD - [[File:seh2_wall_8.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_8]]. Adjustment module.

File:seh2wall9.png|'''Wall Module 9''' -SweetHome3D-[[File:seh2_wall_9.sh3d.zip]] - FreeCAD - [[File:seh2_wall_9.fcstd]] - [[Build_Cheatsheet_for_Wall_Module_9]]

File:seh2_wall_10.png|'''Wall Module 10''' -SweetHome3D-[[File:seh2_wall_10.sh3d.zip]] - FreeCAD - [[File:seh2_wall_10.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_10]]

File:Seh2 wall 11.png|'''Wall Module 11''' -SweetHome3D-[[File:seh2_wall_11.sh3d.zip]] - FreeCAD - [[File:seh2_wall_11.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_11]]

File:seh2wall12.png|'''Wall Module 12''' -SweetHome3D-[[File:seh2_wall_12.sh3d.zip]] - FreeCAD - [[File:seh2_wall_12.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_12]]. Structure same as Module 23.

File:seh2wall1freecad.png|'''Wall Module 13''' -SweetHome3D-[[File:seh2_wall_13.sh3d.zip]] - FreeCAD - [[File:seh2_wall_13.fcstd]] --[[Build_Cheatsheet_for_Wall_Module_13]]. Same as Wall 1 structure. But - Wall 1 has a hole for electrical.

File:seh2wall14.png|'''Wall Module 14''' -SweetHome3D-[[File:seh2_wall_14.sh3d.zip]] - FreeCAD - [[File:seh2_wall_14.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_14]]

File:seh2wall15.png|'''Wall Module 15''' -SweetHome3D-[[File:seh2_wall_15.sh3d.zip]] - FreeCAD - [[File:seh2_wall_15.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_15]]

File:Seh2wall16.png|'''Wall Module 16''' -SweetHome3D-[[File:seh2_wall_16.sh3d.zip]] - FreeCAD - [[File:seh2_wall_16.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_16]]. Same structure as Module 4.

File:seh2wall17.png|'''Wall Module 17''' -SweetHome3D-[[File:seh2_wall_17.sh3d.zip]] - FreeCAD - [[File:seh2_wall_17.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_17]]

File:smallwindow3.png|'''Wall Module 18''' -SweetHome3D-[[File:seh2_wall_18.sh3d.zip]] - FreeCAD - [[File:seh2_wall_18.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_18]]. 1st story window module.

File:smallwindow3.png|'''Wall Module 19''' -SweetHome3D-[[File:seh2_wall_19.sh3d.zip]] - FreeCAD - [[File:seh2_wall_19.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_19]]. First story window module. Structure same as 18.

File:Seh2wall20.png|'''Wall Module 20''' -SweetHome3D-[[File:seh2_wall_20.sh3d.zip]] - FreeCAD - [[File:seh2_wall_20.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_20]]

File:seh2_wall_21.png|'''Wall Module 21''' -SweetHome3D-[[File:seh2_wall_21.sh3d.zip]] - FreeCAD - [[File:seh2_wall_21.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_21]]

File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' -SweetHome3D-[[File:seh2_wall_22.sh3d.zip]] - FreeCAD -[[File:seh2_wall_22.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_22]]. Note: FreeCAD file is updated, SH3D is older.

File:seh2wall23.png|'''Wall Module 23''' -SweetHome3D-[[File:seh2_wall_23.sh3d.zip]] - FreeCAD -[[File:seh2_wall_23.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_23]]
</gallery>

==Second Floor Exterior==

<gallery perrow=6>

File:seh2_8ft_panel.png|'''Full panel''' - FreeCAD Detail-[[File:seh2_8ft_panel.fcstd]] Modules 25,29,30,31,33,34,37,38,43 & 44

File:seh2_8ft_short_left_corner.png|'''Short left corner''' - FreeCAD Detail-[[File:seh2_8ft_short_left_corner.fcstd]] Modules 24 & 36

File:seh2_8ft_short_right_corner.png|'''Short right corner''' - FreeCAD Detail-[[File:seh2_8ft_short_right_corner.fcstd]] Modules 27 & 39

File:seh2_8ft_long_left_corner.png|'''Long left corner''' - FreeCAD Detail-[[File:seh2_8ft_long_left_corner.fcstd]] Modules 28 & 40

File:seh2_8ft_long_right_corner.png|'''Long right corner''' - FreeCAD Detail-[[File:seh2_8ft_long_right_corner.fcstd]] Modules 35 & 47

File:seh2_8ft_window.png|'''Window''' - FreeCAD Detail-[[File:seh2_8ft_window.fcstd]] Modules 41, 42, 45 & 46 (Note: this has siding over entire panel including window)

</gallery>

(Note: SweetHome3D starts 2nd floor numbering at #25 (SH3D #25 is 2nd Floor Wall Module #24, etc)

<gallery perrow=6>

File:seh2_8ft_short_left_corner.png|'''Wall Module 24''' -SweetHome3D-[[File:seh2_wall_25.sh3d.zip]] FreeCAD-[[File:seh2_wall_24.fcstd]] [[Build_Cheatsheet_for_Wall_Module_24]]

File:seh2_8ft_panel.png|'''Wall Module 25''' -SweetHome3D-[[File:seh2_wall_26.sh3d.zip]] - FreeCAD -[[File:seh2_wall_25.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_25]]

File:Upperdoorupdate.png|'''Wall Module 26 - second story door.''' -SweetHome3D-[[File:seh2_wall_27.sh3d.zip]] - FreeCAD -[[File:seh2_wall_26.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_26]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 27''' -SweetHome3D-[[File:seh2_wall_28.sh3d.zip]] - FreeCAD - [[File:seh2_wall_27.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_27]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 28''' -SweetHome3D-[[File:seh2_wall_29.sh3d.zip]] - FreeCAD -[[File:seh2_wall_28.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_28]]

File:seh2_8ft_panel.png|'''Wall Module 29''' -SweetHome3D-[[File:seh2_wall_30.sh3d.zip]] FreeCAD-[[File:seh2_wall_29.fcstd]] [[Build_Cheatsheet_for_Wall_Module_29]]

File:seh2_8ft_panel.png|'''Wall Module 30''' -SweetHome3D-[[File:seh2_wall_31.sh3d.zip]] FreeCAD-[[File:seh2_wall_30.fcstd]] [[Build_Cheatsheet_for_Wall_Module_30]]

File:seh2_8ft_panel.png|'''Wall Module 31''' -SweetHome3D-[[File:seh2_wall_32.sh3d.zip]] - FreeCAD -[[File:seh2_wall_31.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_31]]

File:seh2wall32.png|'''Wall Module 32''' -SweetHome3D-[[File:seh2_wall_33.sh3d.zip]] - FreeCAD -[[File:seh2_wall_32.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_32]]

File:seh2_8ft_panel.png|'''Wall Module 33''' -SweetHome3D-[[File:seh2_wall_34.sh3d.zip]] - FreeCAD -[[File:seh2_wall_33.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_33]]

File:seh2_8ft_panel.png|'''Wall Module 34''' -SweetHome3D-[[File:seh2_wall_35.sh3d.zip]] - FreeCAD -[[File:seh2_wall_34.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_34]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 35''' -SweetHome3D-[[File:seh2_wall_36.sh3d.zip]] - FreeCAD -[[File:seh2_wall_35.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_35]]

File:seh2_8ft_short_left_corner.png|'''Wall Module 36''' -SweetHome3D-[[File:seh2_wall_37.sh3d.zip]] - FreeCAD -[[File:seh2_wall_36.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_36]]

File:seh2_8ft_panel.png|'''Wall Module 37''' -SweetHome3D-[[File:seh2_wall_38.sh3d.zip]] - FreeCAD -[[File:seh2_wall_37.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_37]]

File:seh2_8ft_panel.png|'''Wall Module 38''' -SweetHome3D-[[File:seh2_wall_39.sh3d.zip]] - FreeCAD -[[File:seh2_wall_38.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_38]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 39''' -SweetHome3D-[[File:seh2_wall_40.sh3d.zip]] - FreeCAD -[[File:seh2_wall_39.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_39]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 40''' -SweetHome3D-[[File:seh2_wall_41.sh3d.zip]] - FreeCAD -[[File:seh2_wall_40.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_40]]

File:seh2wall41.png|'''Wall Module 41''' -SweetHome3D-[[File:seh2_wall_42.sh3d.zip]] - FreeCAD -[[File:seh2_wall_41.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_41]]

File:seh2wall42.png|'''Wall Module 42''' -SweetHome3D-[[File:seh2_wall_43.sh3d.zip]] - FreeCAD -[[File:seh2_wall_42.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_42]]

File:seh2_8ft_panel.png|'''Wall Module 43''' -SweetHome3D-[[File:seh2_wall_44.sh3d.zip]] - FreeCAD -[[File:seh2_wall_43.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_43]]

File:seh2_8ft_panel.png|'''Wall Module 44''' -SweetHome3D-[[File:seh2_wall_45.sh3d.zip]] - FreeCAD -[[File:seh2_wall_44.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_44]]

File:seh2_8ft_window.png|'''Wall Module 45''' -SweetHome3D-[[File:seh2_wall_46.sh3d.zip]] - FreeCAD -[[File:seh2_wall_45.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_45]]

File:seh2_8ft_window.png|'''Wall Module 46''' -SweetHome3D-[[File:seh2_wall_47.sh3d.zip]] - FreeCAD -[[File:seh2_wall_46.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_46]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 47''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_47.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_47]]

</gallery>

==First Floor Interior==

<gallery perrow=6>

File:seh2_9ft_interior.png|'''Full 2x4 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_interior.fcstd]]

File:seh2_9ft_2x6_interior.png|'''Full 2x6 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_2x6_interior.fcstd]]

File:seh2wall48.png|'''Wall Module 48''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_48.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_48]]

File:seh2wall49.png|'''Wall Module 49''' -SweetHome3D-[[File:seh2_wall_49.sh3d.zip]] - FreeCAD -[[File:seh2_wall_49.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_49]]

File:seh2wall50.png|'''Wall Module 50''' -SweetHome3D-[[File:seh2_wall_50.sh3d.zip]] - FreeCAD -[[File:seh2_wall_50.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_50]]

File:seh2wall51.png|'''Wall Module 51''' -SweetHome3D-[[File:seh2_wall_51.sh3d.zip]] - FreeCAD -[[File:seh2_wall_51.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_51]]

File:seh2wall52.png|'''Wall Module 52''' -SweetHome3D-[[File:seh2_wall_52.sh3d.zip]] - FreeCAD -[[File:seh2_wall_52.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_52]]

File:laundry.png|'''Wall Module 55 (Laundry)''' - FreeCAD -[[File:Laundry.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_55]]

File:seh2wall56.png|'''[[Wall Module 56]]''' -SweetHome3D - [https://drive.google.com/file/d/16dmPzyMUUcRUyOfgH4Kv7yQOHTJ2IEDz/view?usp=sharing] - FreeCAD -[[File:seh2_wall_56.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_56]]

File:seh2wall57.png|'''Wall Module 57''' -SweetHome3D-[[File:seh2_wall_57.sh3d.zip]] - FreeCAD -[[File:seh2_wall_57.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_57]]

File:seh2wall58.png|'''Wall Module 58''' -SweetHome3D-[[File:seh2_wall_58.sh3d.zip]] - FreeCAD -[[File:seh2_wall_58.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_58]]

File:seh2wall59.png|'''Wall Module 59''' -SweetHome3D-[[File:seh2_wall_59.sh3d.zip]] - FreeCAD -[[File:seh2_wall_59.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_59]]

</gallery>

==Second Floor Interior==
[[File:seh2_8ft_interior_door.png|100px]][[File:seh2_8ft_interior.png|100px]][[File:seh2wall63-4.png|100px]][[File:seh2wall64.png|100px]][[File:seh2wall63-3.png|100px]][[File:seh2wall63.png|100px]]

<gallery>
File:seh2_8ft_interior.png|'''Full interior panel''' - FreeCAD Detail-[[File:seh2_8ft_interior.fcstd]]

File:seh2_8ft_interior_door.png|'''Interior door''' - FreeCAD Detail-[[File:seh2_8ft_interior_door.fcstd]] (38x83 rough opening)

File:seh2wall60.png|'''Wall Module 60''' [[:File:seh2_wall_60.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_60.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_60|Build Cheatsheet]]

File:seh2wall61.png|'''Wall Module 61'''<br/>[[:File:seh2_wall_61.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_61.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_61|Build Cheatsheet]]

File:seh2wall62.png|'''[[Wall Module 62]]''' -SweetHome3D-[[File:seh2_wall_62.sh3d.zip]] - FreeCAD - [[File:seh2_wall_62.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_62]]

File:seh2wall63-4.png|'''Wall Module 63'''-SweetHome3D-[[File:seh2_wall_63.sh3d.zip]] - FreeCAD - [[File:seh2_wall_63.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_63]]

File:seh2wall64.png|'''Wall Module 64'''-SweetHome3D-[[File:seh2_wall_64.sh3d.zip]] - FreeCAD - [[File:seh2_wall_64.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_64]]

File:seh2_8ft_interior_door.png|'''[[Wall Module 65]]'''- Interior Door -SweetHome3D-[[File:seh2_wall_65.sh3d.zip]] - FreeCAD - [[File:seh2_wall_65.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_65]]

File:seh2wall66.png|'''Wall Module 66'''-SweetHome3D-[[File:seh2_wall_66.sh3d.zip]] - FreeCAD - [[File:seh2_wall_66.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_66]]

File:seh2_8ft_interior.png|'''Wall Module 67'''<br/>[[:File:seh2_wall_67.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_67.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_67|Build Cheatsheet]]

File:Seh2wall68.png|'''Wall Module 68'''<br/> [[:File:seh2_wall_68.sh3d.zip|SweetHome 3D]]<br/>[[:File:seh2_wall_68.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_68|Build Cheatsheet]]<br/>[https://github.com/cryptogoth/freecad-python/blob/main/Panel-Workbench/PanelsGui.py#L80 Python Workbench Code]

File:seh2wall69.png|'''Wall Module 69'''-SweetHome3D-[[File:seh2_wall_69.sh3d.zip]] - FreeCAD - [[File:seh2_wall_69.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_69]]
</gallery>

==Select Details==

[[File:blockingdetail2.png|100px]][[File:blockingdetail.png|100px]][[File:southwalldetail3.png|100px]][[File:southwalldetail2.png|100px]][[File:southwalldetail.png|100px]][[File:SEH2stairs.png|100px]][[File:stringerless.png|100px]][[File:toptrim6.png|100px]][[File:toptrim5.png|100px]][[File:toptrim4.png|100px]][[File:toptrim2.png|100px]][[File:toptrim.png|100px]][[File:roofdetail.png|100px]]

<gallery>

File:blockingdetail2.png|"First Floor Ceiling Detail. "- FreeCAD - [[File:blockingdetail.fcstd]]

File:southwalldetail3.png|"South wall detail. "- FreeCAD - [[File:southwalldetail.fcstd]]

File:SEH2stairs.png|"Stringerless stairs for SEH 2. "- FreeCAD - [[File:SEH2stairs.fcstd]]

File:stringerless.png|"Stringerless stairs concept. "- FreeCAD - [[File:stringerless.fcstd]]

File:toptrim5.png|"Top wall trim. "- FreeCAD - [[File:toptrim.fcstd]]

File:roofdetail.png|"Roof Detail. "- FreeCAD - [[File:roofdetail.fcstd]].

</gallery>

==Second Story Platform==

[[File:secondstoryfloor4.png|100px]][[File:secondstoryfloor3.png|100px]][[File:secondstoryfloor2.png|100px]][[File:secondstoryfloor.png|100px]]

<gallery>

File:secondstoryfloor3.png|'''[[Second Story Floor Platform]]''' - FreeCAD - [[File:secondstoryfloor.fcstd]].

</gallery>

==Roof==

<gallery>

File:RoofRiserAssembly.png|'''[[Roof Riser]]''' - FreeCAD - [[File:RoofRiserAssembly.fcstd]].

</gallery>

[[File:SecondStoryRoof.fcstd]] [[File:RoofRiserAssembly.fcstd]]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ49OCEr3Sl6YKudBd2MbOAU0Kvx6XPX2lFX_2BiG32Bv4hOUnP1ONTImI7IlKT0d1jpA5sFwxi0-ms/embed?start=false&loop=false&delayms=3000#slide=id.gc9334e75e1_0_2" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1N1lS8RBMy0Y0JnR_h1tz23CYFoR5zespNG4T5m4nnZE/edit#slide=id.gc9334e75e1_0_2 edit]

=Catarina's Source Google Drive, Sweet Home 3D Files=

*Laundry module - [https://drive.google.com/file/d/1zjWbmlwpjXy4DUW1xlzSzDnDrqDglsUs/view?usp=sharing]
*Drive, OBI Models - [https://drive.google.com/drive/folders/0B0NG-lv1ELQvdE9xSGZEeWR3Mm8]
**'''CAD, Rosebud, Working Model as of 5/14/21''' [https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view?usp=sharing]
**'''CAD, Supporting Rosebud Model Files''' - [https://drive.google.com/drive/folders/1ELOrXeIenMNjfYwr6g5HUqoNjGqA38DF]
*Building Book - [Technical designs are found in the Building Book - [https://drive.google.com/drive/folders/1SZrTCkX9S_L8JSD_Dq_xeLDM53MP2vZq]
*Shower drain kit - dimensions - [https://images.homedepot-static.com/catalog/pdfImages/cd/cd10c1ce-fd8e-4efc-8415-60dc104f5090.pdf]

'''Visual History:'''

[[File:staironly.png|100px]][[File:floorandroof.png|100px]][[File:stairs2.png|100px]][[File:stairs.png|100px]][[File:staircase.png|100px]][[File:rooflayers.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:staironly.png|'''Stairs only, 1/10 scale.''' - FreeCAD - [[File:staironly.fcstd]].

File:rooflayers.png|'''Roof layers.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

File:staircase.png|'''Staircase. Technical detail.''' - SweetHome3D -[https://drive.google.com/file/d/1t9PQIM0JRXRPsQ6aqhsMETB53VRYnqgL/view?usp=sharing].

File:stairs.png|'''Stairs. Early concept detail.''' - SweetHome3D -[https://drive.google.com/file/d/1HFNCDa2t4rpEKunZowZ8d9cRtb9EF2li/view?usp=sharing].

File:stairs2.png|'''Stairs. Correct for Aspen.''' - SweetHome3D -[https://drive.google.com/file/d/1-X9sJiHt2KS7ZrOPAeNj0VC2UQlKELNT/view?usp=sharing].

File:floorandroof.png|'''Technical of floor and roof.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

</gallery>

=Concept Modules=

==Part Library==

'''Visual History:'''

[[File:2ndfloorwithbands.png|100px]][[File:trellisonly.png|100px]][[File:bandconcept.png|100px]][[File:overhangrework2.png|100px]][[File:overhangrework.png|100px]][[File:overhang.png|100px]][[File:2ndfloorwithband.png|100px]][[File:firstfloorconcept.png|100px]][[File:secondfloorconcept.png|100px]]

'''Gallery:'''

<gallery perrow=6>
File:2ndfloorwithbands.png|'''Second floor concept with bands.''' - FreeCAD -[[File:2ndfloorwithbands.fcstd]].

File:overhangrework2.png|'''Overhang band - rework from rough underlying shape..''' - FreeCAD -[[File:overhangrework.fcstd]].

File:trellisonly.png|'''Overhang band - detail, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:trellisonly.fcstd]].

File:2ndfloorwithband.png|'''Second floor with band concept, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:2ndfloorwithband.fcstd]].

File:firstfloorconcept.png|'''First floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/first_floor.fcstd].

File:secondfloorconcept.png|'''Second floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/2nd.fcstd].

</gallery>

=Technical Modules=
==Stair Design==
#Please download SweetHome3D to view this file - https://drive.google.com/file/d/1X7H-kKLtFZrs0y3Qwq7GYdgxnL4wskm5/view?usp=sharing
#Determine the correct stair height, and then the landing is like in this concept model - https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view
#Then do the staircase in FreeCAD, which I started here - https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

[[File:stairstringer2.png|100px]][[File:stairstringer.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' Generate technical drawing with TechDraw. FreeCAD -[[File:stairstringer.fcstd]].

</gallery>

=House Build=

Starting with foundation, to bathroom, walls.

[[File:rosebudplumbing2.png|100px]][[File:addedbathtofound.png|100px]][[File:addedholetofound.png|100px]][[File:sillplate7.png|100px]][[File:mudsillanchor2.png|100px]][[File:mudsillanchor.png|100px]][[File:sillplate6.png|100px]][[File:sillplate5.png|100px]][[File:sillplate4.png|100px]][[File:sillplate3.png|100px]][[File:sillplate.png|100px]][[File:2inchinsulation.png|100px]][[File:Baseslab.png|100px]]

<gallery perrow=6>

File:rosebudplumbing.png|'''Rosebud plumbing.''' - FreeCAD - [[File:rosebudplumbing.fcstd]]
File:sillplate7.png|'''Foundation only.''' Note this file has entire sill detail including cement board, flexible vinyl flashing, sill gasket, and ramset boards under doors. Next file continues with the plumbing detail. FreeCAD -[[File:foundationonly.fcstd]]
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]

</gallery>

=Top Plate, Ceiling, Roof=
[[File:roof.png|100px]][[File:ceiling.png|100px]][[File:rosebudtopplate.png|100px]]
<gallery perrow=6>

File:roof.png |'''Rosebud roof.''' All individual parts. Correct shape, stair location not present. - FreeCAD -[[File:roof.FCStd]].

File:ceiling.png|'''Rosebud ceiling.''' - FreeCAD -[[File:ceiling.FCStd]]. '''Deprecated. Newer above.'''

File:rosebudtopplate.png|'''Rosebud top plate.''' - FreeCAD -[[File:rosebudtoplate.FCStd]].

</gallery>

=Wall Modules - LOD 400-500=
Note: for BOM-ready files, Master Module file includes clones for memory management and simplified view within Part Tree. Sample BOM file - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]. '''Missing from BOM file''' - R38 roof insulation, roof ceiling, interior framing, interior insulation. See BOM spreadsheet - [https://docs.google.com/spreadsheets/d/1mxd28_UTffkYQDfi8vPDwGrSyvsTUFg2UACXwgo7wGc/edit#gid=0] generated from FreeCAD BOM test file for first and second floor of house - not including garage - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]

[[File:8footwindow5.png|100px]][[File:8footwindow4.png|100px]][[File:ddfinal.png|100px]][[File:ddplaceholder.png|100px]][[File:8footwall2.png|100px]][[File:8footwall.png|100px]][[File:9footmediumwindow4.png|100px]][[File:singledoormaster9.png|100px]][[File:SAWP.png|100px]][[File:doorsilltape.png|100px]][[File:dripcaptape.png|100px]][[File:dripcap.png|100px]][[File:9footdoorframe4.png.png|100px]][[File:9footdoorframe3.png.png|100px]][[File:9footdoubledoorplaceholder.png|100px]][[File:9footdoubledoor2.png|100px]][[File:9footdoubledooronly.png|100px]][[File:9footdoubledoor.png|100px]][[File:9footmediumwindow3.png|100px]][[File:9footmediumwindow2.png|100px]][[File:9footmediumwindowonly.png|100px]][[File:9footmediumwindow.png|100px]][[File:firstfloorwithdoor.png|100px]][[File:9footdoorframe2.png|100px]][[File:9footdoorframe.png|100px]][[File:9footdoor.png|100px]][[File:9footwalls132.png|100px]][[File:9footwalls13.png|100px]][[File:9footwall12panels.png|100px]][[File:9footwall2.png|100px]][[File:9footwall.png|100px]]

<gallery perrow=6>

File:8footwall2.png|'''8 Foot Wall Panel.''' - FreeCAD -[[File:8footwall.FCStd]].

File:8footwindow4.png|'''8 Foot Large Window Panel. Pseudo, with med window and 9' studs.''' - FreeCAD -[[File:8footwindow.FCStd]].

File:9footwall2.png|'''9 Foot Wall''' - FreeCAD -[[File:9footwall.FCStd]].

File:singledoormaster9.png|'''9 Foot Single Door Master.''' - FreeCAD -[[File:9footdoorpanel.FCStd]].

File:ddfinal.png|'''9 Foot Double Door.''' - FreeCAD -[[File:9footdoubledoor.FCStd]].

File:ddplaceholder.png|'''9 Foot Double Door placeholder.''' - FreeCAD -[[File:9footdoubledoorplaceholder.FCStd]].

File:9footmediumwindow4.png|'''9 Foot Medium Window Panel.''' - FreeCAD -[[File:9footmediumwindow.FCStd]].

</gallery>
==Assemblies==
<gallery perrow=6>

File:firstfloorwithdoor.png|'''9 Foot Walls'''. - FreeCAD -[[File:9footwalls.FCStd]].

File:seh2secondfloor.png|'''Second Floor''' - FreeCAD - [[File:seh2secondfloor.fcstd]]

</gallery>

==Wall Parts==
<gallery perrow=6>

File:largewindow.png|'''Large window.''' - FreeCAD -[[File:largewindowonly.FCStd]].

File:9footdoubledooronly.png|'''9 Foot Double Door only.''' - FreeCAD -[[File:9footdoubledooronly.FCStd]].

File:9footmediumwindowonly.png|'''9 Foot Medium Window pane.''' - FreeCAD -[[File:9footmediumwindowonly.FCStd]].

File:9footdoor.png|'''9 Foot Door, door only, single.''' - FreeCAD -[[File:9footdoor.FCStd]]. Source SweetHome folder - [https://drive.google.com/drive/folders/180KINsLnK6vUlcnhCgAyzDThc-vlaV1G].

</gallery>

=Plumbing Rough-In=

Note: due to local variations - the actual CAD must reconcile against materials used ([https://photos.app.goo.gl/6Mu2gsXhC9jhsi82A]) and the data collection from annotated PVC pictures at [https://photos.app.goo.gl/8Jqt4scFkxHnM8d59]. This is proper CAD-BOM-Reality reconciliation required for a full digital model.

[[File:secondfloortoilet.png|100px]][[File:bathroomonly2.png|100px]][[File:bathroomonly.png|100px]][[File:foundationonly.png|100px]][[File:wallstarting.png|100px]][[File:finishingplumbing.png|100px]][[File:3sweepelbow.png|100px]][[File:continuinghouse.png|100px]][[File:grading.png|100px]][[File:sinkdrain.png|100px]][[File:tuscany.png|100px]][[File:toilet.png|100px]][[File:drain.png|100px]][[File:cuttrapbottom.png|100px]][[File:cuttraptop.png|100px]][[File:15trap.png|100px]][[File:house3.png|100px]][[File:house2.png|100px]][[File:house.png|100px]][[File:bathroomonslab.png|100px]][[File:drainkit4.png|100px]][[File:drainkit3.png|100px]][[File:drainkit2.png|100px]][[File:drainkit.png|100px]][[File:15elbow.png|100px]]

<gallery perrow=6>

File:secondfloortoilet.png|'''Second Floor Toilet Beginning.'''. FreeCAD -[[File:secondfloortoilet.fcstd]]

File:bathroomonly.png|'''Plumbing on slab.''' This can be merged with foundation. FreeCAD -[[File:Plumbing_on_slab.fcstd]]

File:3sweepelbow.png |'''3" sweep elbow for toilet.''' - FreeCAD -[[File:3sweepelbow.fcstd]]

File:grading.png |'''House drainage slope.''' Codes say 6" over 10'. - FreeCAD -[[File:grading.fcstd]]

File:tuscany.png |'''Tuscany toilet.''' - FreeCAD -[[File:tuscany.fcstd]]

File:cuttraptop.png |'''Cut trap bottom, 1.5".''' - FreeCAD -[[File:cuutrapbottom.fcstd]]

File:cuttrapbottom.png |'''Cut trap top, 1.5".''' - FreeCAD -[[File:cuutraptop.fcstd]]

File:15trap.png |'''1.5" PVC Trap.''' - FreeCAD -[[File:15trap.fcstd]]

File:bathroomonslab.png |'''Bathroom on slab.''' - FreeCAD -[[File:bathroomonslab.fcstd]]

File:drainkit4.png |'''Tub drain kit''' - FreeCAD -[[File:tubdrainkit.fcstd]]

File:15elbow.png |'''1.5" elbow''' - FreeCAD -[[File:15elbow.fcstd]]
</gallery>

==BOM==
*4x3 closet bend is recommended [https://terrylove.com/forums/index.php?threads/4x3-inch-closet-bend-or-3-inch-closet-bend.2826/] - so get one at [https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/pvc-fittings/pvc-dwv-fittings/nibco-reg-4x3-closet-elbow-pvc-dwv/p-1444449182622-c-9383.htm]

=Links=
*[[Seed Home v2 3D CAD]]

=Part Library=
[[File:rosebudwalls.png|100px]][[File:spipe.png|100px]][[File:rosebudcore.png|100px]]
[[File:rosebudexp.png|100px]]
[[File:rosebudfound.png|100px]]

Aspen 1 has corridor in front, Aspen 2 in the back. Rosebud is the simplehut.
=Walls - Deprecated=

<gallery perrow=6>
File:rosebudwalls.png|'''Seed Home 2 - Rosebud, walls.''' - FreeCAD - [[File:rosebudwalls.FCStd]].

File:sh2house.png|'''Seed Home 2, Aspen.''' - FreeCAD - [[File:sh2house.FCStd]]. SweetHome3D - [[File:sh2house.zip]]

File:sh2wall.png|'''Seed Home 2 Wall.''' - FreeCAD - [[File:sh2wall.FCStd]]. SweetHome3D - [[File:sh2wall.zip]]

File:sh2door.png|'''Seed Home 2 Door.''' - FreeCAD - [[File:sh2door.FCStd]]. SweetHome3D - [[File:sh2door.zip]]

File:sh2doubledoor.png|'''Seed Home 2 Double Door.''' - FreeCAD - [[File:sh2doubledoor.FCStd]]. SweetHome3D - [[File:sh2doubledoor.zip]]. Source folder - [https://drive.google.com/file/d/1Dbe4lVsE6RyOJUEu4zBhKTfNbJgmNreG/view?usp=sharing]

File:sh2window1.png|'''Seed Home 2 Window 1.''' - FreeCAD - [[File:sh2window1.FCStd]]. SweetHome3D - [[File:sh2window1.zip]]

File:sh2upperroof.png|'''Seed Home 2 Upper Roof.''' - FreeCAD - [[File:sh2upperroof.FCStd]]. SweetHome3D - [[File:sh2upperroof.zip]]

File:sh2lowerroof.png|'''Seed Home 2 Lower Roof.''' - FreeCAD - [[File:sh2lowerroof.FCStd]]. SweetHome3D - [[File:sh2lowerroof.zip]]

File:sh2topplate.png|'''Seed Home 2 Top Plate.''' - FreeCAD - [[File:sh2topplate.FCStd]]. SweetHome3D - [[File:sh2topplate.zip]]

File:sh2uppersheath.png|'''Seed Home 2 Upper Sheathing.''' - FreeCAD - [[File:sh2uppersheath.FCStd]]. SweetHome3D - [[File:sh2uppersheath.zip]]

File:sh2walls.png|'''Seed Home 2 walls.''' - FreeCAD -[[File:sh2walls.FCStd]]. SweetHome3D -[[File:sh2walls.zip]]

File:slab.png|'''Seed Home 2 slab.''' - FreeCAD -[[File:sh2slab.FCStd]]
File:sh2sill.png|'''Seed Home 2 Sill Plate.''' - FreeCAD -[[File:sh2sill.FCStd]]
</gallery>

==Foundation==

See also integration of bathroom for initial plumbing stub-out - [[Shower Part Library]]

<gallery perrow=6>

File:rosebudcore.png|'''Rosebud core. 1000 sf.''' - [[File:rosebud.fcstd]]. Source in Sweet Home 3D - [https://drive.google.com/file/d/1VDnPYKoQJsf5yr0xyyQ423YPzs2y9lKU/view?usp=sharing].

File:rosebudexp.png|'''Rosebud expansion, 2000 sf + garage.''' - [[File:rosebudexp.fcstd]]. Source in SH3D - [https://drive.google.com/file/d/1aifP3eyP0CqmHlb1nwnHdPJuk2dzCGfL/view?usp=sharing]

File:rosebudfound.png|'''Rosebud foundation.''' Deprecated. Use the one from the plumbing rough-in. [[File:rosebudfound.fcstd]]

File:aspen.jpg|'''Aspen model of the Seed Home, 1000 sf.''' - FreeCAD -[[File:asepn.FCStd]]. Source is SH2Technical-Aspen1-Expansion2A.sh3d file at [https://drive.google.com/drive/folders/15k8MlWTz3yMVvIeZYAeOJVm54pB8noHM]

File:aspen2500.png|'''Aspen expanded, 2250 sf + sunroom''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625.png|'''Aspen expanded, 2375 sf.''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625b.png|'''Aspen expanded, 2500 sf + shed''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:skeleton2750.jpg|'''Aspen expanded, 2750, stick model.''' - Source is v2-Framing at [https://drive.google.com/drive/folders/1n-AyTpmoEPyDEbeftewyplJZPtUGPN8i]
</gallery>

==PV==
[[File:array.png|100px]][[File:rec315.png|100px]]
<gallery perrow=6>

File:rec315.png|'''315 W solar panels. ''' - [[File:rec315.fcstd]].

</gallery>

=Viewing=
*You can view online by downloading file, and uploading to http://www.sweethome3d.com/SweetHome3DOnlineManager.jsp. This is the floor, apparently using WebGL :

[[File:sh2floor.jpg|400px]]

*You can download SweetHome3D and view on your computer.

=Embedding=
Embedding of sh3d files doesn't work. There is an embedding capacity provided by SH3D online on their servers, but it can't be iframed in to existing webpages.

[[Category:Seed Eco-Home]]

=Links=
*[[Seed Home 2]]

File:RoofRiserAssembly.fcstd

2021-07-19T16:17:59Z

JET OOTO:

Seed Home v2 3D CAD

2021-07-19T16:11:07Z

JET OOTO: /* Roof */

{{Hint|As of Dec 2020, the Rosebud model is the one we are building and releasing as our first product candidate.}}

=CAD for BOM Purposes + Lumber Cut Lists + Wall Aperture Details=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vSj2QRIcmJDnAz3DvoOg3AILdrfiDrgY6ywEvZcEY55Wvn1bgaei1obAcIrDFdsJf2MMAW7e371glr0/embed?start=false&loop=false&delayms=3000#17" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1wWbj03CQgsJpq1TQaR3Ak9wdGK6av9ExfFlc8O-ER7I/edit#slide=id.gb344355f04_0_10 edit]

==Deprecated Floor Plan==
This doc is in preparation for generating accurate CAD. By thinking out the logic of the system carefully, we optimize for build efficiency and thus degenerate to a sound design, which is then CADded up.

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ4zmzecAHz_NkwZOdBRiSRAUn3H0E7Mtlydyzxdtp-8CKYvLWckc-eFV9Zsmptnrlo5MgRfav7cSGB/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1FQrn4a2RHaWLJeLwQl_-1XRXA9CRvvqNDQW-iJBcqV4/edit#slide=id.g5c3be0ce2d_1_28 edit]

=Seed Home 2 Part Library=
* Interior Walls - [[File:intwalls.sh3d.zip]]
*See [[Seed Home 2 Part Library]]
*[[Seed Home 2 Utility Panel 3D CAD]]

==CAD Detail Documents==

*[[Second Story Door]]

==Wall Modules in SweetHome3d (Structural Design) and FreeCAD (Complete Model)==
See parts of wall modules at [[Architecture Part Library]].

Module Map - Exterior Wall modules - 1-23 are on the first floor - 24-47 are on the second, and the rest are 48-59 for first floor interior modules, and 60-69 are second floor interior modules.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQe3GXvvIKz-3fsiO-R4iIDqlwWZysTXhsa0eK9Bx9ezC26KopU4Aj4pX1jw2_Wx5_IDGFGd9zs30W8/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1KRK3ti4N4kDHfRlniSUiLrpw_jmTOHT0VQGb7vFhU88/edit#slide=id.gd976d2a7e2_6_0 edit]

Note: files end in zip. After download, don't extract - just change filename to remove the .zip at the end and file will be openable in SweetHome3D. These can be upgraded in FreeCAD, the Sweet Home is a start.

These files are extracted from the SweetHome3D technical design file for structure of Seed Eco-Home 2 - [[Seed Eco-Home 2 Technical Design of Structure in SweetHome3D]]

[[File:houseassembly2.png|100px]][[File:seh2_firstfloor.png|100px]][[File:positionallycorrectmod1.png|100px]][[File:upperdoorupdate.png|100px]][[File:houseassemblymaster.png|100px]][[File:houselocation.png|100px]][[File:doorwindow2.png|100px]][[File:doorwindow.png|100px]][[File:adjustmentmodule8.png|100px]][[File:smallwindow3.png|100px]][[File:smallwindow2.png|100px]][[File:smallwindow.png|100px]][[File:frenchdoorexteriortrimdetail.png|100px]][[File:frenchdoorwithtrim.png|100px]][[File:seh2wall4freecad.png|100px]][[File:seh2wall1freecad.png|100px]][[File:seh2wall6.png|100px]][[File:seh2wall17.png|100px]][[File:seh2wall23.png|100px]][[File:seh2wall9.png|100px]][[File:seh2wall3rework4.png|100px]][[File:seh2wall3rework3.png|100px]][[File:seh2wall3rework2.png|100px]][[File:seh2wall3rework.png|100px]][[File:seh2wall22rework2.png|100px]][[File:seh2wall22rework.png|100px]][[File:seh2wall22.png|100px]][[File:seh2wall3.png|100px]][[File:seh2wall2.png|100px]][[File:seh2wall1.png|100px]]

<gallery perrow=6>

File:houseassembly2.png|'''House Assembly Master File.''' - FreeCAD - [[File:houseassemblymaster.fcstd]]

File:seh2_firstfloor.png|'''House Assembly First Floor Only''' - FreeCAD - [[File:seh2_firstfloor.fcstd]] Includes plumbing on slab [[File:Plumbing_on_slab.fcstd]]

File:houselocation.png|'''House Location Master File.''' - FreeCAD - [[File:houselocation.fcstd]]

File:doorwindow2.png|'''Door and window module for adjustment.''' - FreeCAD - [[File:doorwindow.fcstd]]

File:positionallycorrectmod1.png|'''Wall Module 1''' -SweetHome3D-[[File:seh2wall1.sh3d.zip]]- FreeCAD - [[File:seh2_wall_1.fcstd]]--[[Build Cheatsheet for Wall Module 1]].

File:seh2wall2.png|'''Wall Module 2''' -SweetHome3D-[[File:seh2wall2.sh3d.zip]]-- FreeCAD - [[File:seh2_wall_2.fcstd]] - -[[Build Cheatsheet for Wall Module 2]]

File:seh2wall3rework4.png|'''Wall Module 3''' -SweetHome3D-[[File:seh2_wall_3.sh3d.zip]] - FreeCAD -[[File:seh2_wall_3.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_3]]

File:seh2wall4freecad.png|'''Wall Module 4''' -SweetHome3D-[[File:seh2_wall_4.sh3d.zip]] - FreeCAD - [[File:seh2_wall_4.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_4]].

File:seh2wall5.png|'''Wall Module 5''' -SweetHome3D-[[File:seh2_wall_5.sh3d.zip]] -[[Build_Cheatsheet_for_Wall_Module_5]].- FreeCAD - [[File:seh2_wall_5.fcstd]] - Same as Wall Module 17 (opposite long side left corner)

File:seh2wall6.png|'''Wall Module 6''' -SweetHome3D-[[File:seh2_wall_6.sh3d.zip]] - FreeCAD - [[File:seh2_wall_6.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_6]]

File:seh2wall7.png|'''Wall Module 7''' -SweetHome3D-[[File:seh2_wall_7.sh3d.zip]] - FreeCAD - [[File:seh2_wall_7.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_7]]

File:adjustmentmodule8.png|'''Wall Module 8''' -SweetHome3D-[[File:seh2_wall_8.sh3d.zip]] - FreeCAD - [[File:seh2_wall_8.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_8]]. Adjustment module.

File:seh2wall9.png|'''Wall Module 9''' -SweetHome3D-[[File:seh2_wall_9.sh3d.zip]] - FreeCAD - [[File:seh2_wall_9.fcstd]] - [[Build_Cheatsheet_for_Wall_Module_9]]

File:seh2_wall_10.png|'''Wall Module 10''' -SweetHome3D-[[File:seh2_wall_10.sh3d.zip]] - FreeCAD - [[File:seh2_wall_10.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_10]]

File:Seh2 wall 11.png|'''Wall Module 11''' -SweetHome3D-[[File:seh2_wall_11.sh3d.zip]] - FreeCAD - [[File:seh2_wall_11.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_11]]

File:seh2wall12.png|'''Wall Module 12''' -SweetHome3D-[[File:seh2_wall_12.sh3d.zip]] - FreeCAD - [[File:seh2_wall_12.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_12]]. Structure same as Module 23.

File:seh2wall1freecad.png|'''Wall Module 13''' -SweetHome3D-[[File:seh2_wall_13.sh3d.zip]] - FreeCAD - [[File:seh2_wall_13.fcstd]] --[[Build_Cheatsheet_for_Wall_Module_13]]. Same as Wall 1 structure. But - Wall 1 has a hole for electrical.

File:seh2wall14.png|'''Wall Module 14''' -SweetHome3D-[[File:seh2_wall_14.sh3d.zip]] - FreeCAD - [[File:seh2_wall_14.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_14]]

File:seh2wall15.png|'''Wall Module 15''' -SweetHome3D-[[File:seh2_wall_15.sh3d.zip]] - FreeCAD - [[File:seh2_wall_15.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_15]]

File:Seh2wall16.png|'''Wall Module 16''' -SweetHome3D-[[File:seh2_wall_16.sh3d.zip]] - FreeCAD - [[File:seh2_wall_16.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_16]]. Same structure as Module 4.

File:seh2wall17.png|'''Wall Module 17''' -SweetHome3D-[[File:seh2_wall_17.sh3d.zip]] - FreeCAD - [[File:seh2_wall_17.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_17]]

File:smallwindow3.png|'''Wall Module 18''' -SweetHome3D-[[File:seh2_wall_18.sh3d.zip]] - FreeCAD - [[File:seh2_wall_18.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_18]]. 1st story window module.

File:smallwindow3.png|'''Wall Module 19''' -SweetHome3D-[[File:seh2_wall_19.sh3d.zip]] - FreeCAD - [[File:seh2_wall_19.fcstd]] -[[Build_Cheatsheet_for_Wall_Module_19]]. First story window module. Structure same as 18.

File:Seh2wall20.png|'''Wall Module 20''' -SweetHome3D-[[File:seh2_wall_20.sh3d.zip]] - FreeCAD - [[File:seh2_wall_20.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_20]]

File:seh2_wall_21.png|'''Wall Module 21''' -SweetHome3D-[[File:seh2_wall_21.sh3d.zip]] - FreeCAD - [[File:seh2_wall_21.fcstd]] - -[[Build_Cheatsheet_for_Wall_Module_21]]

File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' -SweetHome3D-[[File:seh2_wall_22.sh3d.zip]] - FreeCAD -[[File:seh2_wall_22.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_22]]. Note: FreeCAD file is updated, SH3D is older.

File:seh2wall23.png|'''Wall Module 23''' -SweetHome3D-[[File:seh2_wall_23.sh3d.zip]] - FreeCAD -[[File:seh2_wall_23.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_23]]
</gallery>

==Second Floor Exterior==

<gallery perrow=6>

File:seh2_8ft_panel.png|'''Full panel''' - FreeCAD Detail-[[File:seh2_8ft_panel.fcstd]] Modules 25,29,30,31,33,34,37,38,43 & 44

File:seh2_8ft_short_left_corner.png|'''Short left corner''' - FreeCAD Detail-[[File:seh2_8ft_short_left_corner.fcstd]] Modules 24 & 36

File:seh2_8ft_short_right_corner.png|'''Short right corner''' - FreeCAD Detail-[[File:seh2_8ft_short_right_corner.fcstd]] Modules 27 & 39

File:seh2_8ft_long_left_corner.png|'''Long left corner''' - FreeCAD Detail-[[File:seh2_8ft_long_left_corner.fcstd]] Modules 28 & 40

File:seh2_8ft_long_right_corner.png|'''Long right corner''' - FreeCAD Detail-[[File:seh2_8ft_long_right_corner.fcstd]] Modules 35 & 47

File:seh2_8ft_window.png|'''Window''' - FreeCAD Detail-[[File:seh2_8ft_window.fcstd]] Modules 41, 42, 45 & 46 (Note: this has siding over entire panel including window)

</gallery>

(Note: SweetHome3D starts 2nd floor numbering at #25 (SH3D #25 is 2nd Floor Wall Module #24, etc)

<gallery perrow=6>

File:seh2_8ft_short_left_corner.png|'''Wall Module 24''' -SweetHome3D-[[File:seh2_wall_25.sh3d.zip]] FreeCAD-[[File:seh2_wall_24.fcstd]] [[Build_Cheatsheet_for_Wall_Module_24]]

File:seh2_8ft_panel.png|'''Wall Module 25''' -SweetHome3D-[[File:seh2_wall_26.sh3d.zip]] - FreeCAD -[[File:seh2_wall_25.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_25]]

File:Upperdoorupdate.png|'''Wall Module 26 - second story door.''' -SweetHome3D-[[File:seh2_wall_27.sh3d.zip]] - FreeCAD -[[File:seh2_wall_26.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_26]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 27''' -SweetHome3D-[[File:seh2_wall_28.sh3d.zip]] - FreeCAD - [[File:seh2_wall_27.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_27]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 28''' -SweetHome3D-[[File:seh2_wall_29.sh3d.zip]] - FreeCAD -[[File:seh2_wall_28.fcstd]]. [[Build_Cheatsheet_for_Wall_Module_28]]

File:seh2_8ft_panel.png|'''Wall Module 29''' -SweetHome3D-[[File:seh2_wall_30.sh3d.zip]] FreeCAD-[[File:seh2_wall_29.fcstd]] [[Build_Cheatsheet_for_Wall_Module_29]]

File:seh2_8ft_panel.png|'''Wall Module 30''' -SweetHome3D-[[File:seh2_wall_31.sh3d.zip]] FreeCAD-[[File:seh2_wall_30.fcstd]] [[Build_Cheatsheet_for_Wall_Module_30]]

File:seh2_8ft_panel.png|'''Wall Module 31''' -SweetHome3D-[[File:seh2_wall_32.sh3d.zip]] - FreeCAD -[[File:seh2_wall_31.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_31]]

File:seh2wall32.png|'''Wall Module 32''' -SweetHome3D-[[File:seh2_wall_33.sh3d.zip]] - FreeCAD -[[File:seh2_wall_32.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_32]]

File:seh2_8ft_panel.png|'''Wall Module 33''' -SweetHome3D-[[File:seh2_wall_34.sh3d.zip]] - FreeCAD -[[File:seh2_wall_33.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_33]]

File:seh2_8ft_panel.png|'''Wall Module 34''' -SweetHome3D-[[File:seh2_wall_35.sh3d.zip]] - FreeCAD -[[File:seh2_wall_34.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_34]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 35''' -SweetHome3D-[[File:seh2_wall_36.sh3d.zip]] - FreeCAD -[[File:seh2_wall_35.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_35]]

File:seh2_8ft_short_left_corner.png|'''Wall Module 36''' -SweetHome3D-[[File:seh2_wall_37.sh3d.zip]] - FreeCAD -[[File:seh2_wall_36.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_36]]

File:seh2_8ft_panel.png|'''Wall Module 37''' -SweetHome3D-[[File:seh2_wall_38.sh3d.zip]] - FreeCAD -[[File:seh2_wall_37.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_37]]

File:seh2_8ft_panel.png|'''Wall Module 38''' -SweetHome3D-[[File:seh2_wall_39.sh3d.zip]] - FreeCAD -[[File:seh2_wall_38.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_38]]

File:seh2_8ft_short_right_corner.png|'''Wall Module 39''' -SweetHome3D-[[File:seh2_wall_40.sh3d.zip]] - FreeCAD -[[File:seh2_wall_39.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_39]]

File:seh2_8ft_long_left_corner.png|'''Wall Module 40''' -SweetHome3D-[[File:seh2_wall_41.sh3d.zip]] - FreeCAD -[[File:seh2_wall_40.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_40]]

File:seh2wall41.png|'''Wall Module 41''' -SweetHome3D-[[File:seh2_wall_42.sh3d.zip]] - FreeCAD -[[File:seh2_wall_41.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_41]]

File:seh2wall42.png|'''Wall Module 42''' -SweetHome3D-[[File:seh2_wall_43.sh3d.zip]] - FreeCAD -[[File:seh2_wall_42.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_42]]

File:seh2_8ft_panel.png|'''Wall Module 43''' -SweetHome3D-[[File:seh2_wall_44.sh3d.zip]] - FreeCAD -[[File:seh2_wall_43.fcstd]].-[[Build_Cheatsheet_for_Wall_Module_43]]

File:seh2_8ft_panel.png|'''Wall Module 44''' -SweetHome3D-[[File:seh2_wall_45.sh3d.zip]] - FreeCAD -[[File:seh2_wall_44.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_44]]

File:seh2_8ft_window.png|'''Wall Module 45''' -SweetHome3D-[[File:seh2_wall_46.sh3d.zip]] - FreeCAD -[[File:seh2_wall_45.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_45]]

File:seh2_8ft_window.png|'''Wall Module 46''' -SweetHome3D-[[File:seh2_wall_47.sh3d.zip]] - FreeCAD -[[File:seh2_wall_46.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_46]]

File:seh2_8ft_long_right_corner.png|'''Wall Module 47''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_47.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_47]]

</gallery>

==First Floor Interior==

<gallery perrow=6>

File:seh2_9ft_interior.png|'''Full 2x4 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_interior.fcstd]]

File:seh2_9ft_2x6_interior.png|'''Full 2x6 interior panel''' - FreeCAD Detail-[[File:seh2_9ft_2x6_interior.fcstd]]

File:seh2wall48.png|'''Wall Module 48''' -SweetHome3D-[[File:seh2_wall_48.sh3d.zip]] - FreeCAD -[[File:seh2_wall_48.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_48]]

File:seh2wall49.png|'''Wall Module 49''' -SweetHome3D-[[File:seh2_wall_49.sh3d.zip]] - FreeCAD -[[File:seh2_wall_49.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_49]]

File:seh2wall50.png|'''Wall Module 50''' -SweetHome3D-[[File:seh2_wall_50.sh3d.zip]] - FreeCAD -[[File:seh2_wall_50.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_50]]

File:seh2wall51.png|'''Wall Module 51''' -SweetHome3D-[[File:seh2_wall_51.sh3d.zip]] - FreeCAD -[[File:seh2_wall_51.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_51]]

File:seh2wall52.png|'''Wall Module 52''' -SweetHome3D-[[File:seh2_wall_52.sh3d.zip]] - FreeCAD -[[File:seh2_wall_52.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_52]]

File:laundry.png|'''Wall Module 55 (Laundry)''' - FreeCAD -[[File:Laundry.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_55]]

File:seh2wall56.png|'''[[Wall Module 56]]''' -SweetHome3D - [https://drive.google.com/file/d/16dmPzyMUUcRUyOfgH4Kv7yQOHTJ2IEDz/view?usp=sharing] - FreeCAD -[[File:seh2_wall_56.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_56]]

File:seh2wall57.png|'''Wall Module 57''' -SweetHome3D-[[File:seh2_wall_57.sh3d.zip]] - FreeCAD -[[File:seh2_wall_57.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_57]]

File:seh2wall58.png|'''Wall Module 58''' -SweetHome3D-[[File:seh2_wall_58.sh3d.zip]] - FreeCAD -[[File:seh2_wall_58.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_58]]

File:seh2wall59.png|'''Wall Module 59''' -SweetHome3D-[[File:seh2_wall_59.sh3d.zip]] - FreeCAD -[[File:seh2_wall_59.fcstd]]. -[[Build_Cheatsheet_for_Wall_Module_59]]

</gallery>

==Second Floor Interior==
[[File:seh2_8ft_interior_door.png|100px]][[File:seh2_8ft_interior.png|100px]][[File:seh2wall63-4.png|100px]][[File:seh2wall64.png|100px]][[File:seh2wall63-3.png|100px]][[File:seh2wall63.png|100px]]

<gallery>
File:seh2_8ft_interior.png|'''Full interior panel''' - FreeCAD Detail-[[File:seh2_8ft_interior.fcstd]]

File:seh2_8ft_interior_door.png|'''Interior door''' - FreeCAD Detail-[[File:seh2_8ft_interior_door.fcstd]] (38x83 rough opening)

File:seh2wall60.png|'''Wall Module 60''' [[:File:seh2_wall_60.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_60.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_60|Build Cheatsheet]]

File:seh2wall61.png|'''Wall Module 61'''<br/>[[:File:seh2_wall_61.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_61.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_61|Build Cheatsheet]]

File:seh2wall62.png|'''[[Wall Module 62]]''' -SweetHome3D-[[File:seh2_wall_62.sh3d.zip]] - FreeCAD - [[File:seh2_wall_62.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_62]]

File:seh2wall63-4.png|'''Wall Module 63'''-SweetHome3D-[[File:seh2_wall_63.sh3d.zip]] - FreeCAD - [[File:seh2_wall_63.fcstd]]-[[Build_Cheatsheet_for_Wall_Module_63]]

File:seh2wall64.png|'''Wall Module 64'''-SweetHome3D-[[File:seh2_wall_64.sh3d.zip]] - FreeCAD - [[File:seh2_wall_64.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_64]]

File:seh2_8ft_interior_door.png|'''[[Wall Module 65]]'''- Interior Door -SweetHome3D-[[File:seh2_wall_65.sh3d.zip]] - FreeCAD - [[File:seh2_wall_65.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_65]]

File:seh2wall66.png|'''Wall Module 66'''-SweetHome3D-[[File:seh2_wall_66.sh3d.zip]] - FreeCAD - [[File:seh2_wall_66.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_66]]

File:seh2_8ft_interior.png|'''Wall Module 67'''<br/>[[:File:seh2_wall_67.sh3d.zip|SweetHome3D]]<br/>[[:File:seh2_wall_67.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_67|Build Cheatsheet]]

File:Seh2wall68.png|'''Wall Module 68'''<br/> [[:File:seh2_wall_68.sh3d.zip|SweetHome 3D]]<br/>[[:File:seh2_wall_68.fcstd|FreeCAD]]<br/>[[Build_Cheatsheet_for_Wall_Module_68|Build Cheatsheet]]<br/>[https://github.com/cryptogoth/freecad-python/blob/main/Panel-Workbench/PanelsGui.py#L80 Python Workbench Code]

File:seh2wall69.png|'''Wall Module 69'''-SweetHome3D-[[File:seh2_wall_69.sh3d.zip]] - FreeCAD - [[File:seh2_wall_69.fcstd]]--[[Build_Cheatsheet_for_Wall_Module_69]]
</gallery>

==Select Details==

[[File:blockingdetail2.png|100px]][[File:blockingdetail.png|100px]][[File:southwalldetail3.png|100px]][[File:southwalldetail2.png|100px]][[File:southwalldetail.png|100px]][[File:SEH2stairs.png|100px]][[File:stringerless.png|100px]][[File:toptrim6.png|100px]][[File:toptrim5.png|100px]][[File:toptrim4.png|100px]][[File:toptrim2.png|100px]][[File:toptrim.png|100px]][[File:roofdetail.png|100px]]

<gallery>

File:blockingdetail2.png|"First Floor Ceiling Detail. "- FreeCAD - [[File:blockingdetail.fcstd]]

File:southwalldetail3.png|"South wall detail. "- FreeCAD - [[File:southwalldetail.fcstd]]

File:SEH2stairs.png|"Stringerless stairs for SEH 2. "- FreeCAD - [[File:SEH2stairs.fcstd]]

File:stringerless.png|"Stringerless stairs concept. "- FreeCAD - [[File:stringerless.fcstd]]

File:toptrim5.png|"Top wall trim. "- FreeCAD - [[File:toptrim.fcstd]]

File:roofdetail.png|"Roof Detail. "- FreeCAD - [[File:roofdetail.fcstd]].

</gallery>

==Second Story Platform==

[[File:secondstoryfloor4.png|100px]][[File:secondstoryfloor3.png|100px]][[File:secondstoryfloor2.png|100px]][[File:secondstoryfloor.png|100px]]

<gallery>

File:secondstoryfloor3.png|'''[[Second Story Floor Platform]]''' - FreeCAD - [[File:secondstoryfloor.fcstd]].

</gallery>

==Roof==

[[File:SecondStoryRoof.fcstd]] [[File:RoofRiserAssembly.fcstd]]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ49OCEr3Sl6YKudBd2MbOAU0Kvx6XPX2lFX_2BiG32Bv4hOUnP1ONTImI7IlKT0d1jpA5sFwxi0-ms/embed?start=false&loop=false&delayms=3000#slide=id.gc9334e75e1_0_2" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1N1lS8RBMy0Y0JnR_h1tz23CYFoR5zespNG4T5m4nnZE/edit#slide=id.gc9334e75e1_0_2 edit]

=Catarina's Source Google Drive, Sweet Home 3D Files=

*Laundry module - [https://drive.google.com/file/d/1zjWbmlwpjXy4DUW1xlzSzDnDrqDglsUs/view?usp=sharing]
*Drive, OBI Models - [https://drive.google.com/drive/folders/0B0NG-lv1ELQvdE9xSGZEeWR3Mm8]
**'''CAD, Rosebud, Working Model as of 5/14/21''' [https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view?usp=sharing]
**'''CAD, Supporting Rosebud Model Files''' - [https://drive.google.com/drive/folders/1ELOrXeIenMNjfYwr6g5HUqoNjGqA38DF]
*Building Book - [Technical designs are found in the Building Book - [https://drive.google.com/drive/folders/1SZrTCkX9S_L8JSD_Dq_xeLDM53MP2vZq]
*Shower drain kit - dimensions - [https://images.homedepot-static.com/catalog/pdfImages/cd/cd10c1ce-fd8e-4efc-8415-60dc104f5090.pdf]

'''Visual History:'''

[[File:staironly.png|100px]][[File:floorandroof.png|100px]][[File:stairs2.png|100px]][[File:stairs.png|100px]][[File:staircase.png|100px]][[File:rooflayers.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:staironly.png|'''Stairs only, 1/10 scale.''' - FreeCAD - [[File:staironly.fcstd]].

File:rooflayers.png|'''Roof layers.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

File:staircase.png|'''Staircase. Technical detail.''' - SweetHome3D -[https://drive.google.com/file/d/1t9PQIM0JRXRPsQ6aqhsMETB53VRYnqgL/view?usp=sharing].

File:stairs.png|'''Stairs. Early concept detail.''' - SweetHome3D -[https://drive.google.com/file/d/1HFNCDa2t4rpEKunZowZ8d9cRtb9EF2li/view?usp=sharing].

File:stairs2.png|'''Stairs. Correct for Aspen.''' - SweetHome3D -[https://drive.google.com/file/d/1-X9sJiHt2KS7ZrOPAeNj0VC2UQlKELNT/view?usp=sharing].

File:floorandroof.png|'''Technical of floor and roof.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].

</gallery>

=Concept Modules=

==Part Library==

'''Visual History:'''

[[File:2ndfloorwithbands.png|100px]][[File:trellisonly.png|100px]][[File:bandconcept.png|100px]][[File:overhangrework2.png|100px]][[File:overhangrework.png|100px]][[File:overhang.png|100px]][[File:2ndfloorwithband.png|100px]][[File:firstfloorconcept.png|100px]][[File:secondfloorconcept.png|100px]]

'''Gallery:'''

<gallery perrow=6>
File:2ndfloorwithbands.png|'''Second floor concept with bands.''' - FreeCAD -[[File:2ndfloorwithbands.fcstd]].

File:overhangrework2.png|'''Overhang band - rework from rough underlying shape..''' - FreeCAD -[[File:overhangrework.fcstd]].

File:trellisonly.png|'''Overhang band - detail, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:trellisonly.fcstd]].

File:2ndfloorwithband.png|'''Second floor with band concept, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:2ndfloorwithband.fcstd]].

File:firstfloorconcept.png|'''First floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/first_floor.fcstd].

File:secondfloorconcept.png|'''Second floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/2nd.fcstd].

</gallery>

=Technical Modules=
==Stair Design==
#Please download SweetHome3D to view this file - https://drive.google.com/file/d/1X7H-kKLtFZrs0y3Qwq7GYdgxnL4wskm5/view?usp=sharing
#Determine the correct stair height, and then the landing is like in this concept model - https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view
#Then do the staircase in FreeCAD, which I started here - https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

[[File:stairstringer2.png|100px]][[File:stairstringer.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' Generate technical drawing with TechDraw. FreeCAD -[[File:stairstringer.fcstd]].

</gallery>

=House Build=

Starting with foundation, to bathroom, walls.

[[File:rosebudplumbing2.png|100px]][[File:addedbathtofound.png|100px]][[File:addedholetofound.png|100px]][[File:sillplate7.png|100px]][[File:mudsillanchor2.png|100px]][[File:mudsillanchor.png|100px]][[File:sillplate6.png|100px]][[File:sillplate5.png|100px]][[File:sillplate4.png|100px]][[File:sillplate3.png|100px]][[File:sillplate.png|100px]][[File:2inchinsulation.png|100px]][[File:Baseslab.png|100px]]

<gallery perrow=6>

File:rosebudplumbing.png|'''Rosebud plumbing.''' - FreeCAD - [[File:rosebudplumbing.fcstd]]
File:sillplate7.png|'''Foundation only.''' Note this file has entire sill detail including cement board, flexible vinyl flashing, sill gasket, and ramset boards under doors. Next file continues with the plumbing detail. FreeCAD -[[File:foundationonly.fcstd]]
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]

</gallery>

=Top Plate, Ceiling, Roof=
[[File:roof.png|100px]][[File:ceiling.png|100px]][[File:rosebudtopplate.png|100px]]
<gallery perrow=6>

File:roof.png |'''Rosebud roof.''' All individual parts. Correct shape, stair location not present. - FreeCAD -[[File:roof.FCStd]].

File:ceiling.png|'''Rosebud ceiling.''' - FreeCAD -[[File:ceiling.FCStd]]. '''Deprecated. Newer above.'''

File:rosebudtopplate.png|'''Rosebud top plate.''' - FreeCAD -[[File:rosebudtoplate.FCStd]].

</gallery>

=Wall Modules - LOD 400-500=
Note: for BOM-ready files, Master Module file includes clones for memory management and simplified view within Part Tree. Sample BOM file - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]. '''Missing from BOM file''' - R38 roof insulation, roof ceiling, interior framing, interior insulation. See BOM spreadsheet - [https://docs.google.com/spreadsheets/d/1mxd28_UTffkYQDfi8vPDwGrSyvsTUFg2UACXwgo7wGc/edit#gid=0] generated from FreeCAD BOM test file for first and second floor of house - not including garage - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]

[[File:8footwindow5.png|100px]][[File:8footwindow4.png|100px]][[File:ddfinal.png|100px]][[File:ddplaceholder.png|100px]][[File:8footwall2.png|100px]][[File:8footwall.png|100px]][[File:9footmediumwindow4.png|100px]][[File:singledoormaster9.png|100px]][[File:SAWP.png|100px]][[File:doorsilltape.png|100px]][[File:dripcaptape.png|100px]][[File:dripcap.png|100px]][[File:9footdoorframe4.png.png|100px]][[File:9footdoorframe3.png.png|100px]][[File:9footdoubledoorplaceholder.png|100px]][[File:9footdoubledoor2.png|100px]][[File:9footdoubledooronly.png|100px]][[File:9footdoubledoor.png|100px]][[File:9footmediumwindow3.png|100px]][[File:9footmediumwindow2.png|100px]][[File:9footmediumwindowonly.png|100px]][[File:9footmediumwindow.png|100px]][[File:firstfloorwithdoor.png|100px]][[File:9footdoorframe2.png|100px]][[File:9footdoorframe.png|100px]][[File:9footdoor.png|100px]][[File:9footwalls132.png|100px]][[File:9footwalls13.png|100px]][[File:9footwall12panels.png|100px]][[File:9footwall2.png|100px]][[File:9footwall.png|100px]]

<gallery perrow=6>

File:8footwall2.png|'''8 Foot Wall Panel.''' - FreeCAD -[[File:8footwall.FCStd]].

File:8footwindow4.png|'''8 Foot Large Window Panel. Pseudo, with med window and 9' studs.''' - FreeCAD -[[File:8footwindow.FCStd]].

File:9footwall2.png|'''9 Foot Wall''' - FreeCAD -[[File:9footwall.FCStd]].

File:singledoormaster9.png|'''9 Foot Single Door Master.''' - FreeCAD -[[File:9footdoorpanel.FCStd]].

File:ddfinal.png|'''9 Foot Double Door.''' - FreeCAD -[[File:9footdoubledoor.FCStd]].

File:ddplaceholder.png|'''9 Foot Double Door placeholder.''' - FreeCAD -[[File:9footdoubledoorplaceholder.FCStd]].

File:9footmediumwindow4.png|'''9 Foot Medium Window Panel.''' - FreeCAD -[[File:9footmediumwindow.FCStd]].

</gallery>
==Assemblies==
<gallery perrow=6>

File:firstfloorwithdoor.png|'''9 Foot Walls'''. - FreeCAD -[[File:9footwalls.FCStd]].

File:seh2secondfloor.png|'''Second Floor''' - FreeCAD - [[File:seh2secondfloor.fcstd]]

</gallery>

==Wall Parts==
<gallery perrow=6>

File:largewindow.png|'''Large window.''' - FreeCAD -[[File:largewindowonly.FCStd]].

File:9footdoubledooronly.png|'''9 Foot Double Door only.''' - FreeCAD -[[File:9footdoubledooronly.FCStd]].

File:9footmediumwindowonly.png|'''9 Foot Medium Window pane.''' - FreeCAD -[[File:9footmediumwindowonly.FCStd]].

File:9footdoor.png|'''9 Foot Door, door only, single.''' - FreeCAD -[[File:9footdoor.FCStd]]. Source SweetHome folder - [https://drive.google.com/drive/folders/180KINsLnK6vUlcnhCgAyzDThc-vlaV1G].

</gallery>

=Plumbing Rough-In=

Note: due to local variations - the actual CAD must reconcile against materials used ([https://photos.app.goo.gl/6Mu2gsXhC9jhsi82A]) and the data collection from annotated PVC pictures at [https://photos.app.goo.gl/8Jqt4scFkxHnM8d59]. This is proper CAD-BOM-Reality reconciliation required for a full digital model.

[[File:secondfloortoilet.png|100px]][[File:bathroomonly2.png|100px]][[File:bathroomonly.png|100px]][[File:foundationonly.png|100px]][[File:wallstarting.png|100px]][[File:finishingplumbing.png|100px]][[File:3sweepelbow.png|100px]][[File:continuinghouse.png|100px]][[File:grading.png|100px]][[File:sinkdrain.png|100px]][[File:tuscany.png|100px]][[File:toilet.png|100px]][[File:drain.png|100px]][[File:cuttrapbottom.png|100px]][[File:cuttraptop.png|100px]][[File:15trap.png|100px]][[File:house3.png|100px]][[File:house2.png|100px]][[File:house.png|100px]][[File:bathroomonslab.png|100px]][[File:drainkit4.png|100px]][[File:drainkit3.png|100px]][[File:drainkit2.png|100px]][[File:drainkit.png|100px]][[File:15elbow.png|100px]]

<gallery perrow=6>

File:secondfloortoilet.png|'''Second Floor Toilet Beginning.'''. FreeCAD -[[File:secondfloortoilet.fcstd]]

File:bathroomonly.png|'''Plumbing on slab.''' This can be merged with foundation. FreeCAD -[[File:Plumbing_on_slab.fcstd]]

File:3sweepelbow.png |'''3" sweep elbow for toilet.''' - FreeCAD -[[File:3sweepelbow.fcstd]]

File:grading.png |'''House drainage slope.''' Codes say 6" over 10'. - FreeCAD -[[File:grading.fcstd]]

File:tuscany.png |'''Tuscany toilet.''' - FreeCAD -[[File:tuscany.fcstd]]

File:cuttraptop.png |'''Cut trap bottom, 1.5".''' - FreeCAD -[[File:cuutrapbottom.fcstd]]

File:cuttrapbottom.png |'''Cut trap top, 1.5".''' - FreeCAD -[[File:cuutraptop.fcstd]]

File:15trap.png |'''1.5" PVC Trap.''' - FreeCAD -[[File:15trap.fcstd]]

File:bathroomonslab.png |'''Bathroom on slab.''' - FreeCAD -[[File:bathroomonslab.fcstd]]

File:drainkit4.png |'''Tub drain kit''' - FreeCAD -[[File:tubdrainkit.fcstd]]

File:15elbow.png |'''1.5" elbow''' - FreeCAD -[[File:15elbow.fcstd]]
</gallery>

==BOM==
*4x3 closet bend is recommended [https://terrylove.com/forums/index.php?threads/4x3-inch-closet-bend-or-3-inch-closet-bend.2826/] - so get one at [https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/pvc-fittings/pvc-dwv-fittings/nibco-reg-4x3-closet-elbow-pvc-dwv/p-1444449182622-c-9383.htm]

=Links=
*[[Seed Home v2 3D CAD]]

=Part Library=
[[File:rosebudwalls.png|100px]][[File:spipe.png|100px]][[File:rosebudcore.png|100px]]
[[File:rosebudexp.png|100px]]
[[File:rosebudfound.png|100px]]

Aspen 1 has corridor in front, Aspen 2 in the back. Rosebud is the simplehut.
=Walls - Deprecated=

<gallery perrow=6>
File:rosebudwalls.png|'''Seed Home 2 - Rosebud, walls.''' - FreeCAD - [[File:rosebudwalls.FCStd]].

File:sh2house.png|'''Seed Home 2, Aspen.''' - FreeCAD - [[File:sh2house.FCStd]]. SweetHome3D - [[File:sh2house.zip]]

File:sh2wall.png|'''Seed Home 2 Wall.''' - FreeCAD - [[File:sh2wall.FCStd]]. SweetHome3D - [[File:sh2wall.zip]]

File:sh2door.png|'''Seed Home 2 Door.''' - FreeCAD - [[File:sh2door.FCStd]]. SweetHome3D - [[File:sh2door.zip]]

File:sh2doubledoor.png|'''Seed Home 2 Double Door.''' - FreeCAD - [[File:sh2doubledoor.FCStd]]. SweetHome3D - [[File:sh2doubledoor.zip]]. Source folder - [https://drive.google.com/file/d/1Dbe4lVsE6RyOJUEu4zBhKTfNbJgmNreG/view?usp=sharing]

File:sh2window1.png|'''Seed Home 2 Window 1.''' - FreeCAD - [[File:sh2window1.FCStd]]. SweetHome3D - [[File:sh2window1.zip]]

File:sh2upperroof.png|'''Seed Home 2 Upper Roof.''' - FreeCAD - [[File:sh2upperroof.FCStd]]. SweetHome3D - [[File:sh2upperroof.zip]]

File:sh2lowerroof.png|'''Seed Home 2 Lower Roof.''' - FreeCAD - [[File:sh2lowerroof.FCStd]]. SweetHome3D - [[File:sh2lowerroof.zip]]

File:sh2topplate.png|'''Seed Home 2 Top Plate.''' - FreeCAD - [[File:sh2topplate.FCStd]]. SweetHome3D - [[File:sh2topplate.zip]]

File:sh2uppersheath.png|'''Seed Home 2 Upper Sheathing.''' - FreeCAD - [[File:sh2uppersheath.FCStd]]. SweetHome3D - [[File:sh2uppersheath.zip]]

File:sh2walls.png|'''Seed Home 2 walls.''' - FreeCAD -[[File:sh2walls.FCStd]]. SweetHome3D -[[File:sh2walls.zip]]

File:slab.png|'''Seed Home 2 slab.''' - FreeCAD -[[File:sh2slab.FCStd]]
File:sh2sill.png|'''Seed Home 2 Sill Plate.''' - FreeCAD -[[File:sh2sill.FCStd]]
</gallery>

==Foundation==

See also integration of bathroom for initial plumbing stub-out - [[Shower Part Library]]

<gallery perrow=6>

File:rosebudcore.png|'''Rosebud core. 1000 sf.''' - [[File:rosebud.fcstd]]. Source in Sweet Home 3D - [https://drive.google.com/file/d/1VDnPYKoQJsf5yr0xyyQ423YPzs2y9lKU/view?usp=sharing].

File:rosebudexp.png|'''Rosebud expansion, 2000 sf + garage.''' - [[File:rosebudexp.fcstd]]. Source in SH3D - [https://drive.google.com/file/d/1aifP3eyP0CqmHlb1nwnHdPJuk2dzCGfL/view?usp=sharing]

File:rosebudfound.png|'''Rosebud foundation.''' Deprecated. Use the one from the plumbing rough-in. [[File:rosebudfound.fcstd]]

File:aspen.jpg|'''Aspen model of the Seed Home, 1000 sf.''' - FreeCAD -[[File:asepn.FCStd]]. Source is SH2Technical-Aspen1-Expansion2A.sh3d file at [https://drive.google.com/drive/folders/15k8MlWTz3yMVvIeZYAeOJVm54pB8noHM]

File:aspen2500.png|'''Aspen expanded, 2250 sf + sunroom''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625.png|'''Aspen expanded, 2375 sf.''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:aspen2625b.png|'''Aspen expanded, 2500 sf + shed''' - Source is Aspen1-Expansion or Aspen2-Expansion at [https://drive.google.com/drive/folders/1TRTNbmYU5RjAJCeUW4ESCEOgyqINVQfh]

File:skeleton2750.jpg|'''Aspen expanded, 2750, stick model.''' - Source is v2-Framing at [https://drive.google.com/drive/folders/1n-AyTpmoEPyDEbeftewyplJZPtUGPN8i]
</gallery>

==PV==
[[File:array.png|100px]][[File:rec315.png|100px]]
<gallery perrow=6>

File:rec315.png|'''315 W solar panels. ''' - [[File:rec315.fcstd]].

</gallery>

=Viewing=
*You can view online by downloading file, and uploading to http://www.sweethome3d.com/SweetHome3DOnlineManager.jsp. This is the floor, apparently using WebGL :

[[File:sh2floor.jpg|400px]]

*You can download SweetHome3D and view on your computer.

=Embedding=
Embedding of sh3d files doesn't work. There is an embedding capacity provided by SH3D online on their servers, but it can't be iframed in to existing webpages.

[[Category:Seed Eco-Home]]

=Links=
*[[Seed Home 2]]

File:SecondStoryRoof.fcstd

2021-07-19T14:59:33Z

JET OOTO: JET OOTO uploaded a new version of File:SecondStoryRoof.fcstd

File:Houseassembly2.png

2021-07-16T17:28:39Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassembly2.png

File:Houseassembly2.png

2021-07-16T15:07:57Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassembly2.png

File:Houseassemblymaster.fcstd

2021-07-16T15:05:43Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassemblymaster.fcstd

=Notes=
#'''19:23, 11 July 2021''' first floor windows need to be dropped so it's even with rest of the tops.

File:Seh2 wall 63.fcstd

2021-07-16T14:56:13Z

JET OOTO: JET OOTO uploaded a new version of File:Seh2 wall 63.fcstd

=Notes=
*First file has all the sketches

File:Stairs.fcstd

2021-07-16T13:59:49Z

JET OOTO: JET OOTO uploaded a new version of File:Stairs.fcstd

File:Houseassemblymaster.fcstd

2021-07-15T16:54:30Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassemblymaster.fcstd

=Notes=
#'''19:23, 11 July 2021''' first floor windows need to be dropped so it's even with rest of the tops.

File:Houseassembly2.png

2021-07-15T15:07:08Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassembly2.png

File:Electrical.fcstd

2021-07-15T13:57:41Z

JET OOTO: JET OOTO uploaded a new version of File:Electrical.fcstd

File:Houseassemblymaster.fcstd

2021-07-14T15:35:32Z

JET OOTO: JET OOTO uploaded a new version of File:Houseassemblymaster.fcstd

=Notes=
#'''19:23, 11 July 2021''' first floor windows need to be dropped so it's even with rest of the tops.

Architecture Part Library

2021-07-14T15:19:29Z

JET OOTO: /* Wall Module Module Library */

=Wall Module Module Library=
[[File:9footpanel.png|100px]] [[File:9footframe.png|100px]] [[File:8footinteriorpanel.png|100px]]
<gallery perrow=6>

File:9footpanel.png|'''9' Outer Frame''' [[File:9footframe.fcstd]].
File:8footinteriorpanel.png|'''8' Interior Wall Module''' [[File:8footinteriorpanel.fcstd]].

</gallery>

=Positional Part Library=
==2x6==
<gallery perrow=6>

File:8footheader.png|'''Header for 8' tall modules.''' - [[File:8foothader.fcstd]].

File:bottomplate.png|'''Bottom plate.''' - [[File:bottomplate.fcstd]].

</gallery>

==2x4==
<gallery perrow=6>

</gallery>

=Wall Module Part Library=
[[File:9foot2x4precut.png|100px]]

<gallery perrow=6>

File:9foot2x4precut.png|'''2x4 9' precut stud.''' - [[File:9footprecutstud.fcstd]].

File:8footprecutstud.png|'''2x4 8' precut stud.''' - [[File:8footprecutstud.fcstd]].

File:topplate.png|'''2x4 48" top plate.''' - [[File:4topplate.fcstd]].

File:shorttopplate.png|'''2x6 short 42.5" top plate.''' - [[File:shorttopplate.fcstd]].

File:topplate.png|'''2x6 top plate.''' - [[File:topplate.fcstd]].

File:9inchblocking.png|'''9" Blocking.''' - [[File:9inchblocking.fcstd]].

File:shortblocking.png|'''Short blocking, split 2x4, 8.5"''' - [[File:shortblocking.fcstd]].

File:BlockingSplit2x4.png|'''Split 2x4 blocking, 14"''' - [[File:Blocking_split_2x4.fcstd]].

File:9footprecut.png|'''9 foot 2x6 precut stud.''' - [[File:9footprecut.fcstd]].

File:8footprecut.png|'''8 foot 2x6 precut stud.''' - 8 foot precut stud - 92.625 inch. -[[File:8footprecut.fcstd]].

File:underheaderstud.png|'''8 foot under header stud.''' - [[File:underheaderstud.fcstd]].

File:Exterior_plywood.png|'''Exterior Plywood''' - [[File:Exterior_plywood.fcstd]].

</gallery>

=Part Library=

'''Visual History:'''

[[File:2inchangle.png|100px]][[File:roofdete3.png|100px]][[File:roofdete2.png|100px]][[File:roofmetalslice.png|100px]][[File:roofdete.png|100px]][[File:roofmetal.png|100px]][[File:shorttopplate.png|100px]][[File:shortblocking.png|100px]][[File:9footprecut.png|100px]][[File:topplate.png|100px]][[File:blockignsplit2x4.png|100px]][[File:8footprecut.png|100px]][[File:hurricanetie.png|100px]]

'''Gallery:'''

<gallery perrow=6>
File:2inchangle.png|'''1/4" x 2" angle.''' - [[File:2inchangle.fcstd]].

File:roofmetalslice.png|'''Roofing metal slice.''' - [[File:roofmetalslice.fcstd]].

File:roofdete3.png|'''Roofing detail for a 'roofless roof with solar panels'.''' - [[File:roofdete.fcstd]].

File:roofmetal.png|'''Roofing metal.''' - [[File:roofingmetal.fcstd]].

File:shorttopplate.png|'''2x6 short top plate.''' - [[File:shorttopplate.fcstd]].

File:topplate.png|'''2x6 top plate.''' - [[File:topplate.fcstd]].

File:shortblocking.png|'''Short blocking, split 2x4, 8.5"''' - [[File:shortblocking.fcstd]].

File:Blockignsplit2x4.png|'''Split 2x4 blocking, 14.5"''' - [[File:Blockignsplit2x4.fcstd]].

File:underheaderstud.png|'''8 foot under header stud.''' - [[File:underheaderstud.fcstd]].

File:9footprecut.png|'''9 foot 2x6 precut stud.''' - [[File:9footprecut.fcstd]].

File:8footprecut.png|'''8 foot 2x6 precut stud.''' - 8 foot precut stud - 92.625 inch. -[[File:8footprecut.fcstd]].

File:hurricanetie.png|'''Hurricane tie.''' - Hurricane tie. -[[File:hurricanetie.fcstd]].

</gallery>

=More 2x6=
*60" - [[File:60inch2by6.fcstd]]

=2x4=
*48" top plate - [[File:topplate2x4.fcstd]]
*8' precut stud - [[File:2x4precut.fcstd]]
*9' precut stud - [[File:2x4precut9.fcstd]]

File:8footinteriorpanel.fcstd

2021-07-14T15:18:55Z

JET OOTO:

Architecture Part Library

2021-07-14T15:10:21Z

JET OOTO: /* Wall Module Module Library */

=Wall Module Module Library=
[[File:9footpanel.png|100px]] [[File:9footframe.png|100px]] [[File:8footinteriorpanel.png|100px]]
<gallery perrow=6>

File:9footpanel.png|'''9' Outer Frame''' [[File:9footframe.fcstd]].
File:8footinteriorpanel.png|'''8' Interior Wall Module''' [[File:8footinteriorpanel.stp]].

</gallery>

=Positional Part Library=
==2x6==
<gallery perrow=6>

File:8footheader.png|'''Header for 8' tall modules.''' - [[File:8foothader.fcstd]].

File:bottomplate.png|'''Bottom plate.''' - [[File:bottomplate.fcstd]].

</gallery>

==2x4==
<gallery perrow=6>

</gallery>

=Wall Module Part Library=
[[File:9foot2x4precut.png|100px]]

<gallery perrow=6>

File:9foot2x4precut.png|'''2x4 9' precut stud.''' - [[File:9footprecutstud.fcstd]].

File:8footprecutstud.png|'''2x4 8' precut stud.''' - [[File:8footprecutstud.fcstd]].

File:topplate.png|'''2x4 48" top plate.''' - [[File:4topplate.fcstd]].

File:shorttopplate.png|'''2x6 short 42.5" top plate.''' - [[File:shorttopplate.fcstd]].

File:topplate.png|'''2x6 top plate.''' - [[File:topplate.fcstd]].

File:9inchblocking.png|'''9" Blocking.''' - [[File:9inchblocking.fcstd]].

File:shortblocking.png|'''Short blocking, split 2x4, 8.5"''' - [[File:shortblocking.fcstd]].

File:BlockingSplit2x4.png|'''Split 2x4 blocking, 14"''' - [[File:Blocking_split_2x4.fcstd]].

File:9footprecut.png|'''9 foot 2x6 precut stud.''' - [[File:9footprecut.fcstd]].

File:8footprecut.png|'''8 foot 2x6 precut stud.''' - 8 foot precut stud - 92.625 inch. -[[File:8footprecut.fcstd]].

File:underheaderstud.png|'''8 foot under header stud.''' - [[File:underheaderstud.fcstd]].

File:Exterior_plywood.png|'''Exterior Plywood''' - [[File:Exterior_plywood.fcstd]].

</gallery>

=Part Library=

'''Visual History:'''

[[File:2inchangle.png|100px]][[File:roofdete3.png|100px]][[File:roofdete2.png|100px]][[File:roofmetalslice.png|100px]][[File:roofdete.png|100px]][[File:roofmetal.png|100px]][[File:shorttopplate.png|100px]][[File:shortblocking.png|100px]][[File:9footprecut.png|100px]][[File:topplate.png|100px]][[File:blockignsplit2x4.png|100px]][[File:8footprecut.png|100px]][[File:hurricanetie.png|100px]]

'''Gallery:'''

<gallery perrow=6>
File:2inchangle.png|'''1/4" x 2" angle.''' - [[File:2inchangle.fcstd]].

File:roofmetalslice.png|'''Roofing metal slice.''' - [[File:roofmetalslice.fcstd]].

File:roofdete3.png|'''Roofing detail for a 'roofless roof with solar panels'.''' - [[File:roofdete.fcstd]].

File:roofmetal.png|'''Roofing metal.''' - [[File:roofingmetal.fcstd]].

File:shorttopplate.png|'''2x6 short top plate.''' - [[File:shorttopplate.fcstd]].

File:topplate.png|'''2x6 top plate.''' - [[File:topplate.fcstd]].

File:shortblocking.png|'''Short blocking, split 2x4, 8.5"''' - [[File:shortblocking.fcstd]].

File:Blockignsplit2x4.png|'''Split 2x4 blocking, 14.5"''' - [[File:Blockignsplit2x4.fcstd]].

File:underheaderstud.png|'''8 foot under header stud.''' - [[File:underheaderstud.fcstd]].

File:9footprecut.png|'''9 foot 2x6 precut stud.''' - [[File:9footprecut.fcstd]].

File:8footprecut.png|'''8 foot 2x6 precut stud.''' - 8 foot precut stud - 92.625 inch. -[[File:8footprecut.fcstd]].

File:hurricanetie.png|'''Hurricane tie.''' - Hurricane tie. -[[File:hurricanetie.fcstd]].

</gallery>

=More 2x6=
*60" - [[File:60inch2by6.fcstd]]

=2x4=
*48" top plate - [[File:topplate2x4.fcstd]]
*8' precut stud - [[File:2x4precut.fcstd]]
*9' precut stud - [[File:2x4precut9.fcstd]]