Open Source Ecology - User contributions [en]

User:James Rogers

2011-12-14T20:33:26Z

James Rogers: Created page with "Under construction."

Under construction.

Talk:CAD Standards

2011-12-14T20:29:18Z

James Rogers: Created page with "'''James Rogers (14 Dec 2011 - 15:30 EST)''': For fasteners and fittings I recommend we use the large quantity of quality models available from McMaster-Carr[http://www.mcmaster...."

'''James Rogers (14 Dec 2011 - 15:30 EST)''': For fasteners and fittings I recommend we use the large quantity of quality models available from McMaster-Carr[http://www.mcmaster.com/#] as almost everything they sell is available to download in a variety of formats.

CAD Needs and Requests

2011-12-14T20:23:16Z

James Rogers: /* Title Block Conversion */

{{CADTemplate}}
[[Category:CAD]]
=Overview=
This page shows current needs required by the [[Development_Team/CAD_Team|GVCS CAD team]]. This can include help with modeling vendor parts, doing drawings of models or analyzing designs. You can also request help from the GVCS CAD team.

=GVCS CAD Team Needs=
If you can help with one of the requests below please edit the page to fill in your details and expected completed date. If you have further questions, contact the original creator linked in "Requested by".
==Modeling==

==Drafting==
===Civilization Starter Kit DVD v0.01 Drawings Required===
*'''Project:''' CEB Press & Soil Pulverizer
*'''Requested by:''' [[Mike Apostol]]
*'''Date Requested:''' 2011-12-11
*'''Need:'''
**[[CEB instructionals CAD Requests]]
**We have a lot of drawings at the piece part and assembly level of the CEB Press and Soil Pulverizer that need to be completed by Dec 20th for the Civilization Start Kit DVD v0.01
*'''Task:'''
**Create drawings of models sent utilizing the OSE title block. Please e-mail mike.apostol@gmail.com if you can provide help. Please include number of hrs/week you can provide and drafting experience. Mike will be coordinating the transfer of models and division of labour depending on available resources.
*'''Files:
** Title block information can be found below
*'''Upon Completion:''' Please send completed drawings in dxf or native SolidWorks format to mike.apostol@gmail.com
*'''Tracking:'''
**'''This task will be organized by e-mail with complete listing of parts and assemblies in an open google-excel doc. Please just send an e-mail to mike dot apostol at gmail dot com if you can help out!
----

===Title Block Conversion===
*'''Project:''' CAD Standards
*'''Requested by:''' [[Mike Apostol]]
*'''Date Requested:''' 2011-12-10
*'''Need:'''
**The title block for drawings is currently available in native Solidworks template *slddrt format only. We need some people to redraw/convert it accurately in DXF (priority) and other native program formats (UG NX, Catia, Alibre) as often times converting dxf title blocks doesn't work accurately.
*'''Task:'''
**Convert existing title block to all sizes ANSI A, B, C, D, E sizes, both Sheet 1 and Sheet 2+ for each size. Go to the [[CAD_Standards#Title_Block|title block section]] on the standards page to see what has been completed.
*'''Files:
** [[CAD_Standards#Title_Block| Current Solidworks files]]
** [[Media:Title_Block_B_-_Sheet_1.PDF|PDF - Sheet 1 Format]]
** [[Media:TitleBlockBSheet2.PDF|PDF - Sheet 2+ Format]]
** [[CAD Logo]] - Logo for the title block. [[Media:Ose_cad_logo.svg| Vector logo]] is also available
*'''Upon Completion:''' Please send completed title blocks with image/screen capture of completed work to CAD@opensourceecology.org
*'''Tracking:'''
**'''Converting to:''' DWG and DXF
**'''''Undertaken by:''' James Rogers''
**'''''Contact Details:''' rogersj3@gmail.com''
**'''''Expected Completion Date:''' 14 DEC 2011''
**'''Converting to:'''
**'''''Undertaken by:'''''
**'''''Contact Details:'''''
**'''''Expected Completion Date:'''''

----

==Design Review==

=External Requests for help=
Add in your request for help from the GVCS CAD team here

CAD Standards

2011-12-14T19:45:32Z

James Rogers: /* Title Block */

{{CADTemplate}}
=Overview=
'''Note: This page is currently just being created. More information to come in the next few days. MA - 2011-12-09'''

This page is to create a unified approach to modeling, drafting and design of open source hardware. Please read thoroughly if you will be doing any CAD work.

Discussions of major changes to the standards outlined here should take place in [[CAD Standards Discussions]] before this page is changed.

=Units=
'''Preference:''' It is the preference for all initial designs to be done in metric as that is the standard in the majority of the world. It is easy to get metric sized materials in the US, but often difficult to get imperial sizes in other countries.

'''Standard:''' All designs should be eventually be available in both metric and imperial.

'''Currently:''' On site at FeF, the prototypes are being fabricated with imperial units and material sizes. Because of this the initial CAD for the products developed is done in imperial. Discussion has already begun on the availability of metric materials from local material suppliers

'''Design Conversion:''' Designs must be carefully reviewed as pure mathematical conversions from standard to metric will not yield designs that are able to be fabricated properly as material sizes and shapes vary between the two systems. However with a little time and effort all designs should be able to be converted to metric. Ideally, once a design is finalized we should be able to produce two, slightly different versions of it. Then the user can choose to build using one or the other, depending on what tools/parts are more readily available in that area.

=Drawings=
Creating drawings that follow standardized formats is important in providing a consistent readability and quality of the open source hardware tools. When making drawings, go carefully over the different fields and ensure they are filled out appropriately to the part or assembly you're creating.

==Title Block==
{| cellpadding="3" cellspacing="0"
|[[File:Titleblockscreenshot.PNG|left|300px]]
|width=400px|The [[Media:Title_Block_B_-_Sheet_1.PDF|OSE Title Block]] is available in ANSI A, B, C, D, and E sizes.

Sheet 1 of any drawing will be the [[Media:Title_Block_B_-_Sheet_1.PDF|full title block]] while sheets 2+ utilize a [[Media:TitleBlockBSheet2.PDF|reduced title block]] that contains only the pertinent information to associate it with Sheet 1.
|}

{| border="1" cellpadding="5" cellspacing="0"
|- style="color:black; background-color:#ffffcc;"
!colspan="8"| OSE Title Block Download
|- style="color:black; background-color:#ffffff;"
!; style="background-color:#ccffcc"| Program
!; style="background-color:#ccffcc"| Extension
!| ANSI A
!| ANSI B
!| ANSI C
!| ANSI D
!| ANSI E
!| Download All
|- align="center"
!|Solidworks
|*.slddrt
|[https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/a-landscape-sheet-1-ose.slddrt 1] [https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/a-landscape-sheet-2-ose.slddrt 2+]
|[https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/b-landscape-sheet-1-ose.slddrt 1] [https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/b-landscape-sheet-2-ose.slddrt 2+]
|[https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/c-landscape-sheet-1-ose.slddrt 1] [https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/c-landscape-sheet-2-ose.slddrt 2+]
|[https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/d-landscape-sheet-1-ose.slddrt 1] [https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/d-landscape-sheet-2-ose.slddrt 2+]
|[https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/e-landscape-sheet-1-ose.slddrt 1] [https://bitbucket.org/elifarley/ose-cad/src/tip/sheet-formats/e-landscape-sheet-2-ose.slddrt 2+]
|[https://bitbucket.org/elifarley/ose-cad/get/tip.zip Zip]
|- align="center"
!|AutoCAD
|*.DWG
|Placeholder
|Placeholder
|Placeholder
|Placeholder
|Placeholder
|Placeholder
|- align="center"
!|General Use
|*.DXF
|Placeholder
|Placeholder
|Placeholder
|Placeholder
|Placeholder
|Placeholder
|}

*'''Lettering:''' All text on the drawing should be done in ''BLOCK LETTERS''.

*'''Units:''' Units and tolerances are in imperial but are easily modified to metric.

*'''Need:''' Please provide replication of these title blocks to native formats in other programs if you have the capability to do so and add them to the table. [[CAD_Needs_and_Requests#Title_Block_Conversion|Go here]] to help out

==License Agreement==
Drawings should either not have a license agreement or contain the following text:
* ALL INFORMATION IS RELEASED UNDER THE OSE LICENSE FOR DISTRIBUTIVE ECONOMICS. FOR FURTHER INFORMATION GO TO: OPENSOURCEECOLOGY.ORG/WIKI/LICENSE

==Dimensions==
===Tolerances===
===GD&T===

==Drawing Views==
===Standard Views===
===Sections and Detailed Views===
===Third Angle Projection===

==Notes==
All drawing notes should be in BLOCK LETTERS and go on the top left of Sheet 1 under "NOTES:" as seen on this sample drawing (coming soon). Notes should be numbered and if they are used to reference a specific place on the drawing place a hexagon around the number and use that in the drawing views. They can also be placed beside parts on the BOM in a similar fashion.
===Material===
===Fabrication Help===
===URLs===

==Layers==
Although not critical, it is useful to separate out the different aspects of the drawings onto different layers.

Title Block - Layer XX
Dimensions - Layer XX
Model Views - Layer XX

==Bill of Material==
The bill of material (BOM) is used to list all the parts in an assembly or weldment of parts. You can view a sample of this '''here'''. Most CAD packages can automatically create these, however if a manual BOM is required please ensure the following fields are present:
* ITEM NO.
* PART NUMBER
* DESCRIPTION
* QTY

==Vendor Item Drawings==
For items that are purchased, it is often useful to make a drawing of them. The drawing outlines the critical physical dimensions, tolerances and features that are important for space claim and mounting purposes.

In the notes you can also add relevant specifications and a list of vendors.

=Part Numbering and Naming=
==Non-Significant Numbering==
==Part Naming==
==Standard Hardware==

=Revision Level=
Revision level should start at A and progress from there to B, C, D, etc. If a part is revised over revision level Z, the next revision level shall be AA, AB, AC, etc.

=Part Attributes=
Some useful part attributes to embed into part and assembly files:
* Description
* Part Number (File name)
* Revision
* Material
* Stock Size

{{Wanted|Need to find out if these get saved across different file types like STEP. This becomes an issue if we're depending on these to create BOMs and MBOMs}}

=Materials=
A-36 or 1010-1020

=Standard Hardware=
We will be creating a multi-format database of models of standard hardware based on industry standard sizes (both metric and imperial) that will be freely available to download.
{{Wanted|If you can help us create this database or have one already made please e-mail CAD@opensourceecology.org}}

'''[[CAD Standard Sizes]]''' - Discussion on standard sizes of hardware and materials that should be tried to use more often in designs to facilitate more modular and repairable designs among the GVCS tools.
==Downloadable Database==
Look into [[SKDB]] to see if still relevant.
==Fastening Hardware==
==Hydraulic Fittings Hardware==
==Structural Members==

=Routings=

=Export Formats=

==Models==
* Solidworks Native
* eDrawings
* STEP
* COLLADA
* STL

==Drawings==
* Solidworks Native
* eDrawings
* DXF
* DWG
* PDF

=Bill of Materials vs Manufacturing Bill of Material=

=Design Best Practices=

*[[OSE_Specifications#GVCS_Specifications.2FCore_Values|OSE Core Values]]

[[Category: CAD]]

CEB instructionals CAD Requests

2011-12-14T18:51:44Z

James Rogers: /* Fab drawings */

Please place a check ([[Image:check.png]]) if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.

=Fab drawings=
*[[Brick Holder Plate]]-100079-1
*[[Controller Mount]]-100084-1
*[[Dirt-keeper plate]]-100080-1
*[[Valve Mount]]-100051-1
*[[CEB Press/Manufacturing Instructions/Arms - primary|Arms - primary]]-100009-1(right) ,100010-1 (left)
**We need hole punch diagrams, please do not show the hole where the grate supports (100091) attach, this will be torched later.
**Please label each with either "right" or "left" arm.
**IN PROCESS (12/13/11 - J ROGERS)
*[[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]] 100003 - show hole placement and where to weld leg holders.
**IN PROCESS (12/13/11 - J ROGERS)
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]]-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
**How to cut for both 5x10 or 4x8 sheets
**Exploded parts diagram of how to assemble hopper sheet metal with hinge plates (100064 series, 100065 series) and all bolts and nuts
*[[CEB Press/Manufacturing Instructions/Hopper mounting plate|Hopper mounting plate]]-Show where to punch holes before welding, and how to weld
**IN PROCESS (12/13/11 - J ROGERS)
*[[CEB Press/Manufacturing Instructions/Soil grate|Soil grate]]-100070-1 can see page for examples of what's needed.
**Need for both "new" and "old" versions
**Show where to torch holes in angle.- 100068-4, 10086-3
**how to weld frame together- 100068-4, 10086-3, 100069-1, 10069-5
**placement of rebars/flats and cross flat
*[[CEB Press/Manufacturing Instructions/Soil Shaker motor unit|Soil Shaker motor unit]]- Exploded parts diagram on hydraulics
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]]
**All holes on bottom angle- 100042
**All holes on top angle-100043
**Guard plate cut-away detail- 100074
**Hammer detail 100044,100045
**Exploded parts of assembly (or something like assembly diagram on page)
*[[CEB Press/Manufacturing Instructions/Soil loading drawer|Soil loading drawer]]-100026- (in progress (ROB B 12-13-11)) 3D ones similar to those on page, showing how it's assembled., also a 2D view from above or below showing distances and placings.
*[[CEB Press/Manufacturing Instructions/Roller guides|Roller guides]]- Expanded parts like on page (theres no group on CAD for entire roller guide assembly), 2D showing holes (100021)
*[[CEB Press/Manufacturing Instructions/Main Cylinder Preparation| Main Cylinder Preparation]]
**Upper Press foot hole diagram-100036
**Lower Press foot hole diagram- 100035
**Side view of prepared main cylinder-100038, 100039, those nuts there...
**Expanded parts diagram with captions of hydraulic couplers
*[[CEB Press/Manufacturing Instructions/Main Frame Preparation|Main Frame Preparation]]
**Hole locations horizontal(100014) , and drawer members (100011).
**Drawer adjustment nuts location (top side of 100011)
**Hole locations vertical members 100115, 100015 Please label with what goes in there (sensor
**Wide Cylinder supports 100108,100100
*[[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]]
**Roller Guide placement expanded (see page, theres one there similar to what we want)
**Side view showing placement of all U-channel and wide cylinder supports (100011,100014,100115,100015,100041, 100108,100100) and where to weld leg holders to them (100007)
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]-exploded parts diagrams

=Updated Sketchup Models from CAD model=
*[[Brick Holder Plate]]
*[[Controller Mount]]
*[[Dirt-keeper plate]]
*[[Valve Mount]]
*[[CEB Press/Manufacturing Instructions/Arms - primary|Arms - primary]]
*[[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Grate mounts|Grate mounts]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Hopper supports|Hopper supports]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]]
*[[CEB Press/Manufacturing Instructions/Hopper mounting plate|Hopper mounting plate]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Soil grate|Soil grate]]
*[[CEB Press/Manufacturing Instructions/Soil Shaker motor unit|Soil Shaker motor unit]]
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Soil loading drawer|Soil loading drawer]]- [[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Roller guides|Roller guides]]
*[[CEB Press/Manufacturing Instructions/Main Cylinder Preparation| Main Cylinder Preparation]]
*[[CEB Press/Manufacturing Instructions/Main Frame Preparation|Main Frame Preparation]]
**Magnet Holder
**Sensor Holders
**Wide Cylinder Supports
**Thin Cylinder Supports
**Drawer Members
**Vertical Member
**Horizontal Members
*[[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]]
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]

CEB instructionals CAD Requests

2011-12-14T18:31:40Z

James Rogers: /* Fab drawings */

Please place a check ([[Image:check.png]]) if you have placed the fab drawing on a page. You can either place a drawing on the page or email me the drawings at brianna (at) kufadesigns (dot) com and I can put them up.

=Fab drawings=
*[[Brick Holder Plate]]-100079-1
*[[Controller Mount]]-100084-1
*[[Dirt-keeper plate]]-100080-1
*[[Valve Mount]]-100051-1
*[[CEB Press/Manufacturing Instructions/Arms - primary|Arms - primary]]-100009-1(right) ,100010-1 (left)
**We need hole punch diagrams, please do not show the hole where the grate supports (100091) attach, this will be torched later.
**Please label each with either "right" or "left" arm.
**IN PROCESS (12/13/11 - J ROGERS)
*[[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]] 100003 - show hole placement and where to weld leg holders.
**IN PROCESS (12/13/11 - J ROGERS)
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]]-Hopper Sheet Metal: (100060-1, 100061-1, 100062-1, 100062-2)
**How to cut for both 5x10 or 4x8 sheets
**Exploded parts diagram of how to assemble hopper sheet metal with hinge plates (100064 series, 100065 series) and all bolts and nuts
*[[CEB Press/Manufacturing Instructions/Hopper mounting plate|Hopper mounting plate]]-Show where to punch holes before welding, and how to weld
*[[CEB Press/Manufacturing Instructions/Soil grate|Soil grate]]-100070-1 can see page for examples of what's needed.
**Need for both "new" and "old" versions
**Show where to torch holes in angle.- 100068-4, 10086-3
**how to weld frame together- 100068-4, 10086-3, 100069-1, 10069-5
**placement of rebars/flats and cross flat
*[[CEB Press/Manufacturing Instructions/Soil Shaker motor unit|Soil Shaker motor unit]]- Exploded parts diagram on hydraulics
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]]
**All holes on bottom angle- 100042
**All holes on top angle-100043
**Guard plate cut-away detail- 100074
**Hammer detail 100044,100045
**Exploded parts of assembly (or something like assembly diagram on page)
*[[CEB Press/Manufacturing Instructions/Soil loading drawer|Soil loading drawer]]-100026- (in progress (ROB B 12-13-11)) 3D ones similar to those on page, showing how it's assembled., also a 2D view from above or below showing distances and placings.
*[[CEB Press/Manufacturing Instructions/Roller guides|Roller guides]]- Expanded parts like on page (theres no group on CAD for entire roller guide assembly), 2D showing holes (100021)
*[[CEB Press/Manufacturing Instructions/Main Cylinder Preparation| Main Cylinder Preparation]]
**Upper Press foot hole diagram-100036
**Lower Press foot hole diagram- 100035
**Side view of prepared main cylinder-100038, 100039, those nuts there...
**Expanded parts diagram with captions of hydraulic couplers
*[[CEB Press/Manufacturing Instructions/Main Frame Preparation|Main Frame Preparation]]
**Hole locations horizontal(100014) , and drawer members (100011).
**Drawer adjustment nuts location (top side of 100011)
**Hole locations vertical members 100115, 100015 Please label with what goes in there (sensor
**Wide Cylinder supports 100108,100100
*[[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]]
**Roller Guide placement expanded (see page, theres one there similar to what we want)
**Side view showing placement of all U-channel and wide cylinder supports (100011,100014,100115,100015,100041, 100108,100100) and where to weld leg holders to them (100007)
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]-exploded parts diagrams

=Updated Sketchup Models from CAD model=
*[[Brick Holder Plate]]
*[[Controller Mount]]
*[[Dirt-keeper plate]]
*[[Valve Mount]]
*[[CEB Press/Manufacturing Instructions/Arms - primary|Arms - primary]]
*[[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Grate mounts|Grate mounts]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Hopper supports|Hopper supports]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Hopper sheet metal|Hopper sheet metal]]
*[[CEB Press/Manufacturing Instructions/Hopper mounting plate|Hopper mounting plate]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Soil grate|Soil grate]]
*[[CEB Press/Manufacturing Instructions/Soil Shaker motor unit|Soil Shaker motor unit]]
*[[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]][[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Soil loading drawer|Soil loading drawer]]- [[Image:check.png]]
*[[CEB Press/Manufacturing Instructions/Roller guides|Roller guides]]
*[[CEB Press/Manufacturing Instructions/Main Cylinder Preparation| Main Cylinder Preparation]]
*[[CEB Press/Manufacturing Instructions/Main Frame Preparation|Main Frame Preparation]]
**Magnet Holder
**Sensor Holders
**Wide Cylinder Supports
**Thin Cylinder Supports
**Drawer Members
**Vertical Member
**Horizontal Members
*[[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]]
*[[CEB Press/Manufacturing Instructions/Hoses - Secondary cylinder hose unit|Hoses - Secondary cylinder hose unit]]

Development Team/CAD Team

2011-12-13T03:48:53Z

James Rogers: /* Current Active Members */

{{CADTemplate}}
=Overview=
If you want to contribute CAD Designs to OSE, then join this team! OSE is always looking for help in developing the GVCS and ultimately in creating a collaborative network of people to draw upon for all open source projects. Whether you're a seasoned engineer or brand new to CAD this is a great place to learn, share and create in an open, collaborative environment with people from around the world.

=How to Join=
You can start by posting a short text about yourself and your skills on the [http://openfarmtech.org/forum/categories/introductions Introductions category] of the discussion forum.

Then, please read the [[Team Culturing]] page and fill out the survey, as described there. Don't forget to add '''<nowiki>[[Category: CAD team]]</nowiki>''' to your survey page so that you get [[:Category: CAD team|listed]].

=Specialties=
The goal of the CAD group is to create a completely cross-functional design team that can utilize everyone's expertise in developing refined products. One person can create a concept or design and then send it out to the rest of the design/CAD team for review with their specific specialties in mind. Here are some of the specialties that we'd like on the team:
* For Modeling and Drafting:
** 3D Modeling
** Mechanical Design
** Drafting
** CAD Standards
** GD&T

* For design reviews and discussions:
** Hydraulics
** Drivetrain
** Welding
** FEA (Finite Element Analysis)
** Manufacturing
** CAM (Computer Aided Manufacturing)
** HFE (Human Factors Engineering) & Safety
** Biologists for Bio-mimicry

=Current Active Members=
This is a list of known active members of the CAD Team, which programs they're knowledgeable in and specialties. Please add yourself as appropriate.
{| class="wikitable sortable"
|+ Active Team Members
|-
!Name
!CAD Programs
!Knowledge Specialties
!Hrs/week
|-
|'''[[Mike Apostol]]''' || NX, Solidworks, SketchUp || Design, Modeling, Drafting, GD & T, Standards || 20-30
|-
|'''[[Rob Beddingfield]]''' || Alibre, Solid Edge || Design, Modeling, Drafting || 10
|-
|'''[[Marcin| Marcin Jakuboski]]''' || AutoCAD || Design || 20
|-
|'''[[James Rogers]]''' || SolidWorks, Solid Edge, NX, SketchUp, AutoCAD || Design, Modeling, Drafting, Manufacturing || 20ish
|-
| Add yourself as a copy of this entry || List Programs || Specialties || XX

|}
[[Category: People]]
[[Category: CAD]]

Development Team/CAD Team

2011-12-13T03:37:17Z

James Rogers: /* Current Active Members */

{{CADTemplate}}
=Overview=
If you want to contribute CAD Designs to OSE, then join this team! OSE is always looking for help in developing the GVCS and ultimately in creating a collaborative network of people to draw upon for all open source projects. Whether you're a seasoned engineer or brand new to CAD this is a great place to learn, share and create in an open, collaborative environment with people from around the world.

=How to Join=
You can start by posting a short text about yourself and your skills on the [http://openfarmtech.org/forum/categories/introductions Introductions category] of the discussion forum.

Then, please read the [[Team Culturing]] page and fill out the survey, as described there. Don't forget to add '''<nowiki>[[Category: CAD team]]</nowiki>''' to your survey page so that you get [[:Category: CAD team|listed]].

=Specialties=
The goal of the CAD group is to create a completely cross-functional design team that can utilize everyone's expertise in developing refined products. One person can create a concept or design and then send it out to the rest of the design/CAD team for review with their specific specialties in mind. Here are some of the specialties that we'd like on the team:
* For Modeling and Drafting:
** 3D Modeling
** Mechanical Design
** Drafting
** CAD Standards
** GD&T

* For design reviews and discussions:
** Hydraulics
** Drivetrain
** Welding
** FEA (Finite Element Analysis)
** Manufacturing
** CAM (Computer Aided Manufacturing)
** HFE (Human Factors Engineering) & Safety
** Biologists for Bio-mimicry

=Current Active Members=
This is a list of known active members of the CAD Team, which programs they're knowledgeable in and specialties. Please add yourself as appropriate.
{| class="wikitable sortable"
|+ Active Team Members
|-
!Name
!CAD Programs
!Knowledge Specialties
!Hrs/week
|-
|'''[[Mike Apostol]]''' || NX, Solidworks, SketchUp || Design, Modeling, Drafting, GD & T, Standards || 20-30
|-
|'''[[Rob Beddingfield]]''' || Alibre, Solid Edge || Design, Modeling, Drafting || 10
|-
|'''[[Marcin| Marcin Jakuboski]]''' || AutoCAD || Design || 20
|-
|'''[[James Rogers]]''' || SolidWorks, Solid Edge, NX, SketchUp, AutoCAD || Design, Modeling, Drafting || 20ish
|-
| Add yourself as a copy of this entry || List Programs || Specialties || XX

|}
[[Category: People]]
[[Category: CAD]]