Open Source Ecology - User contributions [en]

Jeff Higdon Log

2021-06-11T00:59:15Z

Jeff Higdon: /* Thu Jun 10, 2021 */

{{RightTOC}}
'''Key Links: - [[Jeff's Manual]]. [https://docs.google.com/presentation/d/1cFWSu73B6HASFLTRoX9yJqAa9SW0TdAUUOVSbdPaqBg/edit#slide=id.gcab593deda_0_2 Critical Path]. [[MJ Log]].'''

<html><iframe width="600" height="400" src="https://osedev.org/wiki/Jeff?start=9/1/2019"></iframe></html>

Links:
=Thu Jun 10, 2021=
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000#slide=id.gdbf728a905_2_0" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gdbf728a905_2_0 edit]

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQ7P8uAg1sSqxmVvRp0gJvCr_V8aqH4d0DgQSjWkzyhBvhBhRQU-pNm5U2gtksuoh5CdmGdR1lUiGBE/embed?start=false&loop=false&delayms=3000#slide=id.gdf8588382a_0_0" frameborder="0" width="701" height="423" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1cFWSu73B6HASFLTRoX9yJqAa9SW0TdAUUOVSbdPaqBg/edit#slide=id.gdf8588382a_0_0 edit]
[[File:File:Jefffreecadbadge.png]]

=Wed Jun 9, 2021=

Hydraulics for shop.
7 hp electric motor, spins at 1475 rpms at 208 volts, can power a 5 gallon per minute pump.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gb328b2d63d_0_9 edit]

=Tue Jun 8, 2021=
[[MicroTrac Mower]].
[[File:PTO Hydraulic Motor.fcstd]]

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gb328b2d63d_0_9 edit]

=Mon June 7, 2021=
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/2i9WEyX42BE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

It took me a bit to figure my way around FreeCad, but once I understood what was being said it seemed pretty easy, at least for this entry level test. I watched the two five minute videos but that was too quick for me to catch and retain everything. The video that helped the most was the one taken in Tom’s shop.
I think if someone was over my shoulder pointing out what was what, I could have learned it much quicker. As it was it was still reasonable in time, it took about 1.5 hours to watch the various videos, replay them a few times , draw a variety of things, then do the drawing required for the test.

Jeff

=Tue Feb 11, 2020=
[[Changfa Diesels]].

Jeff Higdon Log

2021-06-10T03:01:39Z

Jeff Higdon: /* Wed Jun 9, 2021 */

{{RightTOC}}
'''Key Links: - [[Jeff's Manual]]. [https://docs.google.com/presentation/d/1cFWSu73B6HASFLTRoX9yJqAa9SW0TdAUUOVSbdPaqBg/edit#slide=id.gcab593deda_0_2 Critical Path]. [[MJ Log]].'''

<html><iframe width="600" height="400" src="https://osedev.org/wiki/Jeff?start=9/1/2019"></iframe></html>

Links:
=Wed Jun 9, 2021=

Hydraulics for shop.
7 hp electric motor, spins at 1475 rpms at 208 volts, can power a 5 gallon per minute pump.

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gb328b2d63d_0_9 edit]

=Tue Jun 8, 2021=
[[MicroTrac Mower]].
[[File:PTO Hydraulic Motor.fcstd]]

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gb328b2d63d_0_9 edit]

=Mon June 7, 2021=
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/2i9WEyX42BE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>

It took me a bit to figure my way around FreeCad, but once I understood what was being said it seemed pretty easy, at least for this entry level test. I watched the two five minute videos but that was too quick for me to catch and retain everything. The video that helped the most was the one taken in Tom’s shop.
I think if someone was over my shoulder pointing out what was what, I could have learned it much quicker. As it was it was still reasonable in time, it took about 1.5 hours to watch the various videos, replay them a few times , draw a variety of things, then do the drawing required for the test.

Jeff

=Tue Feb 11, 2020=
[[Changfa Diesels]].

Jeff Higdon Log

2021-06-09T00:04:26Z

Jeff Higdon: /* Tue Jun 8, 2021 */

Open Source Mower Conceptual Design

2021-06-09T00:04:05Z

Jeff Higdon:

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gb328b2d63d_0_9 edit]

Open Source Mower Conceptual Design

2021-06-09T00:03:55Z

Jeff Higdon:

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[ https://docs.google.com/presentation/d/1W4SBPKZeTHTbxdeUfpTt5YLRaq0LKUYlQXByush_Cro/edit#slide=id.gb328b2d63d_0_9 edit]

Open Source Mower Conceptual Design

2021-06-09T00:03:23Z

Jeff Higdon: Created page with " <html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vS_zvYQRWBrlRM7069gmfY1x2XI-O4vCCbMB15wt8EoMWm-HackZDu-q1cmDoz06CKMtx2q8HEbrINo/embed?start=false&loop=fals..."

Open Source Mower 3D CAD

2021-06-08T23:38:58Z

Jeff Higdon:

==Part Library==

'''Visual History:'''

[[File:motor+coupler.png|100px]][[File:coupler.png|100px]][[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:motor+coupler.png|'''PTO Motor with coupler.''' - FreeCAD -[[File:PTO Hydraulic Motor+coupler.fcstd]]
File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
File:coupler.png|'''v4 Winder.''' - FreeCAD -[[File:coupler.fcstd]]
</gallery>

File:PTO Hydraulic Motor+coupler.fcstd

2021-06-08T23:38:36Z

Jeff Higdon:

File:Motor+coupler.png

2021-06-08T23:38:24Z

Jeff Higdon:

Open Source Mower 3D CAD

2021-06-08T23:37:53Z

Jeff Higdon: /* Part Library */

==Part Library==

'''Visual History:'''

[[File:motor+coupler.png|100px]][[File:coupler.png|100px]][[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:ptomotor+coupler.png|'''PTO Motor with coupler.''' - FreeCAD -[[File:PTO Hydraulic Motor+coupler.fcstd]]
File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
File:coupler.png|'''v4 Winder.''' - FreeCAD -[[File:coupler.fcstd]]
</gallery>

File:Coupler.fcstd

2021-06-08T23:29:34Z

Jeff Higdon:

Open Source Mower 3D CAD

2021-06-08T23:29:00Z

Jeff Higdon:

==Part Library==

'''Visual History:'''

[[File:coupler.png|100px]][[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
File:coupler.png|'''v4 Winder.''' - FreeCAD -[[File:coupler.fcstd]]
</gallery>

Open Source Mower 3D CAD

2021-06-08T23:28:35Z

Jeff Higdon:

File:Coupler.png

2021-06-08T23:26:32Z

Jeff Higdon:

Open Source Mower 3D CAD

2021-06-08T23:24:28Z

Jeff Higdon:

Open Source Mower 3D CAD

2021-06-08T23:22:53Z

Jeff Higdon:

==Part Library==

'''Visual History:'''

[[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
File:coupler.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
</gallery>

Open Source Mower 3D CAD

2021-06-08T23:08:42Z

Jeff Higdon:

==Part Library==

'''Visual History:'''

[[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
</gallery>

File:PTO Hydraulic Motor.fcstd

2021-06-08T23:05:39Z

Jeff Higdon: Jeff Higdon uploaded a new version of File:PTO Hydraulic Motor.fcstd

aproximate PTO Hydraulilc Motor for microtrac 17.10 sketches. editable.

Open Source Mower 3D CAD

2021-06-08T22:58:00Z

Jeff Higdon:

==Part Library==

'''Visual History:'''

[[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:ptomotor.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
</gallery>

File:Ptomotor.png

2021-06-08T22:57:02Z

Jeff Higdon:

Open Source Mower 3D CAD

2021-06-08T22:56:23Z

Jeff Higdon: /* Part Library */

==Part Library==

'''Visual History:'''

[[File:ptomotor.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:v4dirkwinder.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
</gallery>

Open Source Mower 3D CAD

2021-06-08T22:50:52Z

Jeff Higdon:

==Part Library==

'''Visual History:'''

[[File:v4dirkwinder.png|100px]]

'''Gallery:'''

<gallery perrow=6>

File:v4dirkwinder.png|'''v4 Winder.''' - FreeCAD -[[File:PTO Hydraulic Motor.fcstd]]
</gallery>

Jeff Higdon Log

2021-06-08T22:47:49Z

Jeff Higdon: