Open Source Ecology - User contributions [en]

File:LFS M4 WASHER.jpg

2017-07-03T22:27:59Z

Kassie paul:

File:LFS M3 SHCS8mm.jpg

2017-07-03T22:13:56Z

Kassie paul:

File:LFS M4 SHCS65mm.jpg

2017-07-03T22:12:04Z

Kassie paul:

File:LFS M4 SHCS50mm.jpg

2017-07-03T22:11:30Z

Kassie paul:

File:LFS M4 SHCS30mm.jpg

2017-07-03T22:11:04Z

Kassie paul:

Lyman Filament Extruder Part Library

2017-07-03T22:00:19Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS8mm.jpg|'''LFS_M3 SHCS8mm''' - size:18kb - FreeCAD -[[File:M3 SHCS 8mm.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:4kb - FreeCAD -[[File:M4 Washer.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.png|'''LFS_M4 BRASS HEAT INSERT 3mm''' - size:5kb - FreeCAD -[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Kassie Log

2017-07-03T21:59:03Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, July 3, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 SHCH 65mm.fcstd]]

Completed portions of [http://opensourceecology.org/wiki/Lyman_Filament_Extruder_Part_Library#Spool_Mechanism Part Library] with pictures and file links.

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

=Older=

Wed, May 31, 2017

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

Sun, May 28, 2017

Began work on Lyman Extruder Spooler. Researched purchased parts.

Wed, May 24, 2017

Overview of filament extruder team meeting

Sun, May 21, 2017

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

Sat, May 20, 2017

Got caught up on Marcin's follow up video. Set up Work Log.

Mon, May 5, 2017

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

Kassie Log

2017-07-03T21:58:36Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, July 3, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.
[[File:M4 SHCH 65mm.fcstd]]

Completed portions of [http://opensourceecology.org/wiki/Lyman_Filament_Extruder_Part_Library#Spool_Mechanism Part Library] with pictures and file links.

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

=Older=

Wed, May 31, 2017

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

Sun, May 28, 2017

Began work on Lyman Extruder Spooler. Researched purchased parts.

Wed, May 24, 2017

Overview of filament extruder team meeting

Sun, May 21, 2017

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

Sat, May 20, 2017

Got caught up on Marcin's follow up video. Set up Work Log.

Mon, May 5, 2017

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

File:LFS M4 BRASS HEAT INSERT3mm.png

2017-07-03T21:56:05Z

Kassie paul:

Lyman Filament Extruder Part Library

2017-07-03T21:43:03Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS8mm.jpg|'''LFS_M3 SHCS8mm''' - size:18kb - FreeCAD -[[File:M3 SHCS 8mm.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:4kb - FreeCAD -[[File:M4 Washer.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:5kb - FreeCAD -[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Lyman Filament Extruder Part Library

2017-07-03T21:40:36Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS.jpg|'''LFS_M3 SHCS''' - size:nullkb - FreeCAD -[[LFS_M3 SHCS.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:4kb - FreeCAD -[[File:M4 Washer.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:5kb - FreeCAD -[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Lyman Filament Extruder Part Library

2017-07-03T21:34:02Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS.jpg|'''LFS_M3 SHCS''' - size:nullkb - FreeCAD -[[LFS_M3 SHCS.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:nullkb - FreeCAD -[[LFS_M4 WASHER.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:nullkb - FreeCAD -[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Lyman Filament Extruder Part Library

2017-07-03T21:33:35Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS.jpg|'''LFS_M3 SHCS''' - size:nullkb - FreeCAD -[[LFS_M3 SHCS.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:nullkb - FreeCAD -[[LFS_M4 WASHER.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:nullkb - FreeCAD -[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Lyman Filament Extruder Part Library

2017-07-03T21:25:44Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS.jpg|'''LFS_M3 SHCS''' - size:nullkb - FreeCAD -[[LFS_M3 SHCS.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:nullkb - FreeCAD -[[LFS_M4 WASHER.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:M4 SHCS 30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:nullkb - FreeCAD -[[LFS_M4 BRASS HEAT INSERT3mm.fcstd]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Lyman Filament Extruder Part Library

2017-07-03T21:24:28Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS.jpg|'''LFS_M3 SHCS''' - size:nullkb - FreeCAD -[[LFS_M3 SHCS.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:nullkb - FreeCAD -[[LFS_M4 WASHER.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:14kb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:24kb - FreeCAD -[[File:LFS M4 SHCS50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:24kb - FreeCAD -[[File:LFS M4 SHCS30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:nullkb - FreeCAD -[[LFS_M4 BRASS HEAT INSERT3mm.fcstd]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

Lyman Filament Extruder Part Library

2017-07-03T21:22:35Z

Kassie paul: /* Spool Mechanism */

== THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE ==

I am organizing the current parts into modules based on the working document @ https://docs.google.com/presentation/d/1kcEn6w5-6LOj8CaTewjwlmbjYgZwqZvZFs41FcPaXug/edit#slide=id.g22922db74e_4_0 on page 2. -Dixon

[[File:Lyman_Filament_Extruder.JPG]]
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

{{Hint|Once all the parts here are stable, we will create a FreeCAD Extruder Workbench which includes a drag-and-drop of every part within FreeCAD}}
==Index==
[[Lyman_Filament_Extruder#Master_Index]]

Index:
<iframe src="https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/pubhtml?widget=true&headers=false"></iframe>
[https://docs.google.com/spreadsheets/d/1xpW7wZNaMG4D91tejYScApVJ3ouuDJ4TSgIP6VbSB2o/edit#gid=0]

==Parts Gallery==
===Extruder Electronics===
<gallery perrow=6>
File:LFX_Computer Power Cord.jpg|'''LFX_Computer Power Cord''' - size:nullkb - FreeCAD -[[LFX_Computer Power Cord.fcstd]]
File:Letour 24V power supplyIMG.png|'''LFX_24V Power Supply''' - size:nullkb - FreeCAD -[[File:LFX 24V Power Supply.fcstd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:LFX_PID Controller.jpg|'''LFX_PID Controller''' - size:nullkb - FreeCAD -[[LFX_PID Controller.fcstd]]
File:LFX_Switches.jpg|'''LFX_Switches''' - size:nullkb - FreeCAD -[[LFX_Switches.fcstd]]
File:LFX_Solid State Relay (SSR).jpg|'''LFX_Solid State Relay (SSR)''' - size:nullkb - FreeCAD -[[LFX_Solid State Relay (SSR).fcstd]]
File:LFX_Fan 12 or 24V.jpg|'''LFX_Fan 12 or 24V''' - size:nullkb - FreeCAD -[[LFX_Fan 12 or 24V.fcstd]]
File:LFX_Gear Motor 15 rpm.jpg|'''LFX_Gear Motor 15 rpm''' - size:nullkb - FreeCAD -[[File:LFX Gear Motor 15 rpm.fcstd]]
File:LFX_Screws#2x1/2in.jpg|'''LFX_Screws#2x1/2in''' - size:nullkb - FreeCAD -[[LFX_Screws#2x1/2in.fcstd]]
</gallery>

===Extruder Barrel + Auger + Flange ===
<gallery perrow=6>
File:47_Part__21_coupler.jpg ‎|'''47_Part__21_coupler''' - size:48kb - FreeCAD -[[File:47_Part__21_coupler.fcstd]]. STL (50kb)- [[File:47_Part__21_coupler.stl]]
File:61 Part 50 template.jpg ‎|'''61 Part 50 template''' - size:48kb - FreeCAD -[[File:61_Part__50_template.fcstd]]. STL (40kb)- [[File:61_Part__50_template.stl]]
File:62 Part 51 template.jpg ‎|'''62 Part 51 template''' - size:48kb - FreeCAD -[[File:62_Part__51_template.fcstd]]. STL (121kb)- [[File:62_Part__51_template.stl]]
File:LFX_Auger Bit.jpg|'''LFX_Auger Bit''' - size:nullkb - FreeCAD -[[LFX_Auger Bit.fcstd]]
File:LFX_Coupler motor to auger.jpg|'''LFX_Coupler motor to auger''' - size:nullkb - FreeCAD -[[LFX_Coupler motor to auger.fcstd]]
File:LFX_Brass Plug.jpg|'''LFX_Brass Plug''' - size:nullkb - FreeCAD -[[LFX_Brass Plug.fcstd]]
File:LFX_Phenolic Insulator Block.jpg|'''LFX_Phenolic Insulator Block''' - size:nullkb - FreeCAD -[[LFX_Phenolic Insulator Block.fcstd]]
File:LFX_Flange Black Iron.jpg|'''LFX_Flange Black Iron''' - size:nullkb - FreeCAD -[[LFX_Flange Black Iron.fcstd]]
File:LFX_M5 Bolts.jpg|'''LFX_M5 Bolts''' - size:nullkb - FreeCAD -[[LFX_M5 Bolts.fcstd]]
File:LFX_M5 Washers.jpg|'''LFX_M5 Washers''' - size:nullkb - FreeCAD -[[LFX_M5 Washers.fcstd]]
File:LFX_Washers 1/2".jpg|'''LFX_Washers 1/2"''' - size:nullkb - FreeCAD -[[LFX_Washers 1/2".fcstd]]
File:LFX_Thrust Bearing 1/2".jpg|'''LFX_Thrust Bearing 1/2"''' - size:nullkb - FreeCAD -[[LFX_Thrust Bearing 1/2".fcstd]]
File:LFX_Template for Wood Block.jpg|'''LFX_Template for Wood Block''' - size:nullkb - FreeCAD -[[LFX_Template for Wood Block.fcstd]]
File:LFX_Nipple Black Iron.jpg|'''LFX_Nipple Black Iron''' - size:nullkb - FreeCAD -[[LFX_Nipple Black Iron.fcstd]]
File:LFX_Coupler black iron.jpg|'''LFX_Coupler black iron''' - size:nullkb - FreeCAD -[[LFX_Coupler black iron.fcstd]]
File:5-8 in bronze bushing.jpg|'''5/8" Bronze Bushing''' - size:nullkb - FreeCAD -[[File:5-8 in bronze bushing.fcstd]]
File:LFX_Phenolic Washers M4.jpg|'''LFX_Phenolic Washers M4''' - size:nullkb - FreeCAD -[[LFX_Phenolic Washers M4.fcstd]]
File:LFX_M4 Washers.jpg|'''LFX_M4 Washers''' - size:nullkb - FreeCAD -[[LFX_M4 Washers.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]
File:LFX_M4 Bolts.jpg|'''LFX_M4 Bolts''' - size:nullkb - FreeCAD -[[LFX_M4 Bolts.fcstd]]

</gallery>
===Big Box Enclosure + Hopper===
<gallery perrow=6>
File:26 Extruder Case.jpg ‎|'''26 Extruder Case''' - size:48kb - FreeCAD -[[File:26_Extruder_Case.fcstd]]. STL (152kb)- [[File:26_Extruder_Case.stl]]
File:43 Part 20a HOPPER bot half.jpg ‎|'''43 Part 20a HOPPER bot half''' - size:48kb - FreeCAD -[[File:43_Part__20a_HOPPER_bot_half.fcstd]]. STL (46kb)- [[File:43_Part__20a_HOPPER_bot_half.stl]]
File:45 Part 20a HOPPER top half.jpg ‎|'''45 Part 20a HOPPER top half''' - size:48kb - FreeCAD -[[File:45_Part__20a_HOPPER_top_half.fcstd]]. STL (74kb)- [[File:45_Part__20a_HOPPER_top_half.stl]]
File:46_Part__20b_case.jpg ‎|'''46_Part__20b_case''' - size:48kb - FreeCAD -[[File:46_Part__20b_case.fcstd]]. STL (72kb)- [[File:46_Part__20b_case.stl]]
File:49 Part 33 box.jpg ‎|'''49 Part 33 box''' - size:48kb - FreeCAD -[[File:49_Part__33_box.fcstd]]. STL (24kb)- [[File:49_Part__33_box.stl]]
File:48 Part 32 box.jpg ‎|'''48 Part 32 box''' - size:48kb - FreeCAD -[[File:48_Part__32_box.fcstd]]. STL (12kb)- [[File:48_Part__32_box.stl]]
File:51 Part 35 box.jpg ‎|'''51 Part 35 box''' - size:48kb - FreeCAD -[[File:51_Part__35_box.fcstd]]. STL (33kb)- [[File:51_Part__35_box.stl]]
File:50 Part 34 boc.jpg ‎|'''50 Part 34 box''' - size:48kb - FreeCAD -[[File:50_Part__34_box.fcstd]]. STL (12kb)- [[File:50_Part__34_boc.stl]]
File:55 Part 39 box.jpg|'''55 Part 39 box''' - size:48kb - FreeCAD -[[File:55_Part__39_box.fcstd]]. STL (232kb)- [[File:55_Part__39_box.stl]]
File:54 Part 38 box.jpg |'''54 Part 38 box''' - size:48kb - FreeCAD -[[File:54_Part__38_box.fcstd]]. STL (221kb)- [[File:54_Part__38_box.stl]]
File:53 Part 37 box.jpg ‎|'''53 Part 37 box''' - size:48kb - FreeCAD -[[File:53_Part__37_box.fcstd]]. STL (14kb)- [[File:53_Part__37_box.stl]]
File:52 Part 36 box.jpg ‎|'''52 Part 36 box''' - size:48kb - FreeCAD -[[File:52_Part__36_box.fcstd]]. STL (684kb)- [[File:52_Part__36_box.stl]]
File:56 Part 40 box.jpg |'''56 Part 40 box''' - size:48kb - FreeCAD -[[File:56_Part__40_box.fcstd]]. STL (10kb)- [[File:56_Part__40_box.stl]]
File:57 Part 41 box.jpg ‎|['''57 Part 41 box''' - size:48kb - FreeCAD -[[File:57_Part__41_box.fcstd]]. STL (82kb)- [[File:57_Part__41_box.stl]]
File:41 Part 8 knob.jpg |'''41 Part 8 knob''' - size:48kb - FreeCAD -[[File:41_Part__8_knob.fcstd]]. STL (48kb)- [[File:41_Part__8_knob.stl]]
File:58 Part 43 hopper.jpg ‎ ‎|'''58 Part 43 hopper''' - size:48kb - FreeCAD -[[File:58_Part__43_hopper.fcstd]]. STL (47kb)- [[File:58_Part__43_hopper.stl]]
File:59 Part 44 hopper.jpg ‎|'''59 Part 44 hopper''' - size:48kb - FreeCAD -[[File:59_Part__44_hopper.fcstd]]. STL (991kb)- [[File:59_Part__44_hopper.stl]]
File:60 Part 45 hopper.jpg ‎|'''60 Part 45 hopper''' - size:48kb - FreeCAD -[[File:60_Part__45_hopper.fcstd]]. STL (71kb)- [[File:60_Part__45_hopper.stl]]
File:63 Part 48 H hopper.jpg ‎|'''63 Part 48 H hopper''' - size:48kb - FreeCAD -[[File:63_Part_48_H_hopper.fcstd]]. STL (1mb)- [[File:63_Part_48_H_hopper.stl]]
File:LFX_Brass Plastic Heat Inserts.jpg|'''LFX_Brass Plastic Heat Inserts''' - size:nullkb - FreeCAD -[[LFX_Brass Plastic Heat Inserts.fcstd]]
File:LFX_Screws.jpg|'''LFX_Screws''' - size:nullkb - FreeCAD -[[LFX_Screws.fcstd]]
File:LFX_Shipping tube.jpg|'''LFX_Shipping tube''' - size:nullkb - FreeCAD -[[LFX_Shipping tube.fcstd]]
</gallery>

===Thermal Components===
<gallery perrow=6>
File:LFX_Heat Band.jpg|'''LFX_Heat Band''' - size:nullkb - FreeCAD -[[LFX_Heat Band.fcstd]]
File:LFX_Thermocoupler.jpg|'''LFX_Thermocoupler''' - size:nullkb - FreeCAD -[[LFX_Thermocoupler.fcstd]]
File:LFX_Welding Blanket.jpg|'''LFX_Welding Blanket''' - size:nullkb - FreeCAD -[[LFX_Welding Blanket.fcstd]]
</gallery>
===Spooler Electronic PCBs + Power Supply===
<gallery perrow=6>
File:Letour 24V power supplyIMG.png ‎ ‎|'''Letour 24V power supply''' - size:52kb - FreeCAD - [[File:LFX_24V_Power_Supply.fcstd ]]
File:Relay DPDT AC.jpg ‎ ‎|'''Relay DPDT''' - size:10kb - FreeCAD - [[File:Relay DPDT.FCStd]]
File:Voltage regulatormodule.jpg ‎ ‎|'''LTX Voltage Regulator''' - size:19kb - FreeCAD - [[File:Voltage regulator module.FCStd]]
File:Gearmotor_100RPM_32206.jpg ‎ ‎|'''Gearmotor 100RPM''' - size:9kb - FreeCAD - [[File:Gearmotor_100RPM_32206_MD.FCStd]]
</gallery>

===Spool Mechanism===
<gallery perrow=6>
File:STL_1_SPOOL_DISC.jpg ‎ ‎|'''STL 1 SPOOL DISC''' - size:48kb - FreeCAD -[[File:FCSTD 1 SPOOL DISC.fcstd]]. STL (139kb)- [[File:STL 1 SPOOL DISC.stl ‎]]
File:STL 2 SPOOL CYL.jpg ‎ ‎|'''STL 2 SPOOL CYL''' - size:48kb - FreeCAD -[[File:FCSTD 2 SPOOL CYL.fcstd]]. STL (67kb)- [[File:STL 2 SPOOL CYL.stl ‎]]
File:STL 3 SPOOL HOLDER BRKT.jpg ‎ ‎ ‎|'''STL 3 SPOOL HOLDER BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 3 SPOOL HOLDER BRKT.fcstd]]. STL (72kb)- [[File:STL 3 SPOOL HOLDER BRKT.stl ‎]]

File:STL 6 PULLER MOTOR BRKT.jpg ‎ ‎|'''STL 6 PULLER MOTOR BRKT''' - size:48kb - FreeCAD -[[File:FCSTD 6 PULLER MOTOR BRKT.fcstd]]. STL (75kb)- [[File:STL 6 PULLER MOTOR BRKT.stl ‎]]
File:STL 7 PULLER BRKT LT.jpg ‎ ‎ ‎|'''STL 7 PULLER BRKT LT''' - size:48kb - FreeCAD -[[File:FCSTD 7 PULLER BRKT LT.fcstd]]. STL (57kb)- [[File:STL 7 PULLER BRKT LT.stl ]]
File:STL 8 PULLER BRKT RT.jpg ‎ ‎ ‎|'''STL 8 PULLER BRKT RT''' - size:48kb - FreeCAD -[[File:STL 8 PULLER BRKT RT.fcstd]]. STL (66kb)- [[File:STL 8 PULLER BRKT RT.stl ‎]]
File:STL 9 STANDOFF.jpg ‎ ‎ ‎|'''STL 9 STANDOFF''' - size:48kb - FreeCAD -[[File:STL 9 STANDOFF.fcstd]]. STL (41kb)- [[File:STL 9 STANDOFF.stl ‎]]
File:STL 10 SPOOL PULLEY A.jpg ‎ ‎ ‎|'''STL 10 SPOOL PULLEY A''' - size:48kb - FreeCAD -[[File:STL 10 SPOOL PULLEY A.fcstd]]. STL (112kb)- [[File:STL 10 SPOOL PULLEY A.stl ‎]]
File:STL 11 SPOOL PULLEY B.jpg ‎ ‎ ‎|'''STL 11 SPOOL PULLEY B''' - size:48kb - FreeCAD -[[File:fSTL 11 SPOOL PULLEY B.fcstd]]. STL (85kb)- [[File:STL 11 SPOOL PULLEY B.stl ‎]]
File:STL 12 PULLER COG.jpg ‎ ‎|'''STL 12 PULLER COG''' - size:48kb - FreeCAD -[[File:STL 12 PULLER COG.fcstd]]. STL (44kb)- [[File:STL 12 PULLER COG.stl ‎]]
File:STL 13 COG MOTOR SHAFT 4mm.jpg ‎ ‎ ‎|'''STL 13 COG MOTOR SHAFT 4mm''' - size:48kb - FreeCAD -[[File:STL 13 COG MOTOR SHAFT 4mm.fcstd]]. STL (63kb)- [[File:STL 13 COG MOTOR SHAFT 4mm.stl ]]
File:STL 14 COLLAR.jpg ‎ ‎ ‎|'''STL 14 COLLAR''' - size:48kb - FreeCAD -[[File:STL 14 COLLAR.fcstd]]. STL (62kb)- [[File:STL 14 COLLAR.stl ‎]]
File:STL 15 SPOOL COLLAR 10mm.jpg ‎ ‎ ‎|'''15 SPOOL COLLAR 10mm''' - size:48kb - FreeCAD -[[File:STL_15_SPOOL_COLLAR_10mm.fcstd]]. STL (62kb)- [[File:STL_15_SPOOL_COLLAR_10mm.stl ‎]]
File:LFS_xxx.jpg|'''LFS_xxx''' - size:nullkb - FreeCAD -[[LFS_xxx.fcstd]]
File:LFS_MDF BOARD.jpg|'''LFS_MDF BOARD''' - size:nullkb - FreeCAD -[[LFS_MDF BOARD.fcstd]]
File:LFS_POWER SUPPLY.jpg|'''LFS_POWER SUPPLY''' - size:nullkb - FreeCAD -[[LFS_POWER SUPPLY.fcstd]]
File:LFS_Voltage Regulators (VRM's).jpg|'''LFS_Voltage Regulators (VRM's)''' - size:nullkb - FreeCAD -[[LFS_Voltage Regulators (VRM's).fcstd]]
File:LFS_GEARMOTOR 30 RPM.jpg|'''LFS_GEARMOTOR 30 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 30 RPM.fcstd]]
File:LFS_GEARMOTOR 100 RPM.jpg|'''LFS_GEARMOTOR 100 RPM''' - size:nullkb - FreeCAD -[[LFS_GEARMOTOR 100 RPM.fcstd]]
File:LFS_RELAY DPDT.jpg|'''LFS_RELAY DPDT''' - size:nullkb - FreeCAD -[[LFS_RELAY DPDT.fcstd]]
File:LFS_SWITCH OFF ON.jpg|'''LFS_SWITCH OFF ON''' - size:nullkb - FreeCAD -[[LFS_SWITCH OFF ON.fcstd]]
File:LFS_LATEX RUBBER TIRE.jpg|'''LFS_LATEX RUBBER TIRE''' - size:nullkb - FreeCAD -[[LFS_LATEX RUBBER TIRE.fcstd]]
File:LFS_WOOD DOWEL BIRCH.jpg|'''LFS_WOOD DOWEL BIRCH''' - size:nullkb - FreeCAD -[[LFS_WOOD DOWEL BIRCH.fcstd]]
File:LFS_BEARINGS.jpg|'''LFS_BEARINGS''' - size:nullkb - FreeCAD -[[LFS_BEARINGS.fcstd]]
File:LFS_M3 SHCS.jpg|'''LFS_M3 SHCS''' - size:nullkb - FreeCAD -[[LFS_M3 SHCS.fcstd]]
File:LFS_M3 WASHER.jpg|'''LFS_M3 WASHER''' - size:nullkb - FreeCAD -[[LFS_M3 WASHER.fcstd]]
File:LFS_M4 WASHER.jpg|'''LFS_M4 WASHER''' - size:nullkb - FreeCAD -[[LFS_M4 WASHER.fcstd]]
File:LFS_M4 SHCS65mm.jpg|'''LFS_M4 SHCS65mm''' - size:nullkb - FreeCAD -[[File:LFS M4 SHCS65mm.fcstd]]
File:LFS_M4 SHCS50mm.jpg|'''LFS_M4 SHCS50mm''' - size:nullkb - FreeCAD -[[LFS M4 SHCS50mm.fcstd]]
File:LFS_M4 SHCS30mm.jpg|'''LFS_M4 SHCS30mm''' - size:nullkb - FreeCAD -[[LFS M4 SHCS30mm.fcstd]]
File:LFS_M4 NLOCK NUT4mm.jpg|'''LFS_M4 NLOCK NUT4mm''' - size:nullkb - FreeCAD -[[LFS_M4 NLOCK NUT4mm.fcstd]]
File:LFS_M4 BRASS HEAT INSERT3mm.jpg|'''LFS_M4 BRASS HEAT INSERT3mm''' - size:nullkb - FreeCAD -[[LFS_M4 BRASS HEAT INSERT3mm.fcstd]
File:LFS_SCREW #4 1/2in.jpg|'''LFS_SCREW #4 1/2in''' - size:nullkb - FreeCAD -[[LFS_SCREW #4 1/2in.fcstd]]
File:LFS_ELECTRICAL WIRE.jpg|'''LFS_ELECTRICAL WIRE''' - size:nullkb - FreeCAD -[[LFS_ELECTRICAL WIRE.fcstd]]
File:LFS_WIRE CONNECTORS.jpg|'''LFS_WIRE CONNECTORS''' - size:nullkb - FreeCAD -[[LFS_WIRE CONNECTORS.fcstd]]
File:LFS_CORD CLAMP.jpg|'''LFS_CORD CLAMP''' - size:nullkb - FreeCAD -[[LFS_CORD CLAMP.fcstd]]
</gallery>

===Tension Mechanism===
<gallery perrow=6>
File:STL 5 LOOP STAND.jpg ‎ ‎ ‎|'''STL 5 LOOP STAND''' - size:48kb - FreeCAD -[[File:STL 5 LOOP STAND.fcstd]]. STL (55kb)- [[File:STL 5 LOOP STAND.stl ‎]]
File:LFS_LIMIT SWT W/ WIRE.jpg|'''LFS_LIMIT SWT W/ WIRE''' - size:nullkb - FreeCAD -[[LFS_LIMIT SWT W/ WIRE.fcstd]]
File:STL 4 SWT WIRE GUIDE.jpg ‎ ‎ ‎|'''STL 4 SWT WIRE GUIDE''' - size:48kb - FreeCAD -[[File:STL 4 SWT WIRE GUIDE.fcstd]]. STL (1kb)- [[File:STL 4 SWT WIRE GUIDE.stl ‎]]
File:LFS_SCREW #6 5/8in.jpg|'''LFS_SCREW #6 5/8in''' - size:nullkb - FreeCAD -[[LFS_SCREW #6 5/8in.fcstd]]
</gallery>

===Unsorted Parts===

<gallery perrow=6>

File:66 TEST HOPPER 2.jpg ‎ ‎ ‎|'''66 TEST HOPPER 2''' - size:48kb - FreeCAD -[[File:66_TEST_HOPPER_2.fcstd]]. STL (73kb)- [[File:66_TEST_HOPPER_2.stl]]
File:27 FILAMENT GUIDE BRKT.jpg ‎|'''27 FILAMENT GUIDE BRKT''' - size:48kb - FreeCAD -[[File:27_FILAMENT_GUIDE_BRKT.fcstd]]. STL (93kb)- [[File:27_FILAMENT_GUIDE_BRKT.stl]]
-dupe?File:LFX_Extruder Case.jpg|'''LFX_Extruder Case''' - size:nullkb - FreeCAD -[[LFX_Extruder Case.fcstd]]
File:24 COUPLERS V5 MOTORS.jpg |'''24 COUPLERS V5 MOTORS''' - size:48kb - FreeCAD -[[File:24_COUPLERS_V5_MOTORS.fcstd]]. STL (62kb)- [[File:24_COUPLERS_V5_MOTORS.stl]]
File:25 COUPLERS V6 MOTORS 50mm.jpg ‎|'''25 COUPLERS V6 MOTORS 50mm''' - size:48kb - FreeCAD -[[File:25_COUPLERS_V6_MOTORS_50mm.fcstd]]. STL (57kb)- [[File:25_COUPLERS_V6_MOTORS_50mm.stl]]
File:67 TOP PART OF EXTRUDER CASE.jpg ‎ ‎ ‎|'''67 TOP PART OF EXTRUDER CASE''' - size:48kb - FreeCAD -[[File:67_TOP_PART_OF_EXTRUDER_CASE.fcstd]]. STL (89kb)- [[File:67_TOP_PART_OF_EXTRUDER_CASE.stl]]
File:1_BOTTOM_CORNER_1.jpg|'''1 BOTTOM CORNER 1''' - size:48kb - FreeCAD -[[File:1 BOTTOM CORNER 1.fcstd]]. STL - [[File:1 BOTTOM CORNER 1.stl ‎]]
File:2_BOTTOM_CORNER_1X.jpg|'''2_BOTTOM_CORNER_1X''' - size:47kb - FreeCAD -[[File:2 BOTTOM CORNER 1X.fcstd]]. STL - [[File:2 BOTTOM CORNER 1X.stl ‎]]
File:3_BOTTOM_CORNER_2.jpg|'''3_BOTTOM_CORNER_2''' - size:47kb - FreeCAD -[[File:3 BOTTOM CORNER 2.fcstd]]. STL - [[File:3 BOTTOM CORNER 2.stl ‎]]
File:4_BOTTOM_CORNER_2X.jpg|'''4_BOTTOM_CORNER_2X''' - size:46kb - FreeCAD -[[File:4_BOTTOM_CORNER_2X.fcstd]]. STL - [[File:4_BOTTOM_CORNER_2X.stl]]
File:5 BOTTOM CORNER 3 preview featured.jpg ‎|'''5 BOTTOM CORNER 3''' - size:48kb - FreeCAD -[[File:5_BOTTOM_CORNER_3.fcstd]]. STL (17kb) - [[File:5_BOTTOM_CORNER_3.stl]]
File:6 BOTTOM CORNER 3X preview featured.jpg ‎|'''6 BOTTOM CORNER 3X''' - size:48kb - FreeCAD -[[File:f6_BOTTOM_CORNER_3X.fcstd]]. STL (16kb)- [[File:6_BOTTOM_CORNER_3X.stl]]
File:7 BOTTOM CORNER 4 preview featured.jpg ‎|'''7 BOTTOM CORNER 4''' - size:48kb - FreeCAD -[[File:7_BOTTOM_CORNER_4.fcstd]]. STL (17kb)- [[File:7_BOTTOM_CORNER_4.stl]]
File:8 BOTTOM CORNER 4X.jpg ‎|'''8 BOTTOM CORNER 4X''' - size:48kb - FreeCAD -[[File:8_BOTTOM_CORNER_4X.fcstd]]. STL (16kb)- [[File:8_BOTTOM_CORNER_4X.stl]]
File:9 CASE BOTTOM CORNER.jpg ‎|'''9 CASE BOTTOM CORNER''' - size:48kb - FreeCAD -[[File:9_CASE_BOTTOM_CORNER.fcstd]]. STL (12kb)- [[File:9_CASE_BOTTOM_CORNER.stl]]
File:10 CASE BOTTOM PANEL.jpg ‎|'''10 CASE BOTTOM PANEL''' - size:48kb - FreeCAD -[[File:10_CASE_BOTTOM_PANEL.fcstd]]. STL (43kb)- [[File:10_CASE_BOTTOM_PANEL.stl]]
File:11 CASE FULL TOP-SIDES.jpg ‎|'''11 CASE FULL TOP-SIDES''' - size:48kb - FreeCAD -[[File:11_CASE_FULL_TOP-SIDES.fcstd]]. STL (686kb)- [[File:11_CASE_FULL_TOP-SIDES.stl]]
File:12 CASE SIDE LARGE.jpg ‎|'''12 CASE SIDE LARGE''' - size:48kb - FreeCAD -[[File:12_CASE_SIDE_LARGE.fcstd]]. STL (108kb)- [[File:12_CASE_SIDE_LARGE.stl]]
File:13 CASE SIDE SMALL.jpg|'''13 CASE SIDE SMALL''' - size:48kb - FreeCAD -[[File:13_CASE_SIDE_SMALL.fcstd]]. STL (15kb)- [[File:13_CASE_SIDE_SMALL.stl]]
File:14 CASE SIDES ATTACHED.jpg ‎|'''14 CASE SIDES ATTACHED''' - size:48kb - FreeCAD -[[File:4_CASE_SIDES_ATTACHED.fcstd]]. STL (641kb)- [[File:14_CASE_SIDES_ATTACHED.stl]]
File:15 CASE TOP 1 PEICE.jpg ‎|'''15 CASE TOP 1 PEICE''' - size:48kb - FreeCAD -[[File:15_CASE_TOP_1_PEICE.fcstd]]. STL (44kb)- [[File:15_CASE_TOP_1_PEICE.stl]]
File:16 CASE TOP 1.jpg ‎|'''16 CASE TOP 1''' - size:48kb - FreeCAD -[[File:16_CASE_TOP_1.fcstd]]. STL (31kb)- [[File:16_CASE_TOP_1.stl]]
File:17 CASE TOP 2.jpg ‎|'''17 CASE TOP 2''' - size:48kb - FreeCAD -[[File:17_CASE_TOP_2.fcstd]]. STL (30kb)- [[File:17_CASE_TOP_2.stl]]
File:18 CASE TOP 3.jpg ‎|'''18 CASE TOP 3''' - size:48kb - FreeCAD -[[File:18_CASE_TOP_3.fcstd]]. STL (61kb)- [[File:18_CASE_TOP_3.stl]]
File:19 CASE TOP 4.jpg ‎|'''19 CASE TOP 4''' - size:48kb - FreeCAD -[[File:19_CASE_TOP_4.fcstd]]. STL (18kb)- [[File:19_CASE_TOP_4.stl]]
File:44 Part 20a HOPPER FRT.jpg |'''44 Part 20a HOPPER FRT''' - size:48kb - FreeCAD -[[File:44_Part__20a_HOPPER_FRT.fcstd]]. STL (108kb)- [[File:44_Part__20a_HOPPER_FRT.stl]]
File:28_HOPPER_ADDON_FOOT_LT.jpg | '''28 HOPPER ADDON FOOT LT''' - size:null - FreeCAD -[[File:28_HOPPER_ADDON_FOOT_LT.fcstd]]. STL (14kb) [[File:28_HOPPER_ADDON_FOOT_LT.stl]]
File:29 HOPPER ADDON TOP.jpg|'''29 HOPPER ADDON TOP''' - size:48kb - FreeCAD -[[File:29_HOPPER_ADDON_TOP.fcstd]]. STL (34kb)- [[File:29_HOPPER_ADDON_TOP.stl]]
File:30 HOPPER CLEAR TRANSISTION.jpg ‎|'''30 HOPPER CLEAR TRANSISTION''' - size:48kb - FreeCAD -[[File:30_HOPPER_CLEAR_TRANSISTION.fcstd]]. STL (415kb)- [[File:30_HOPPER_CLEAR_TRANSISTION.stl]]
File:31 HOPPER FOR BAUSH AUGER.jpg ‎|'''31 HOPPER FOR BAUSH AUGER''' - size:48kb - FreeCAD -[[File:31_HOPPER_FOR_BAUSH_AUGER.fcstd]]. STL (159kb)- [[File:31_HOPPER_FOR_BAUSH_AUGER.stl]]
File:32_HOPPER_FOR_IRWIN_AUGER.jpg ‎|'''32_HOPPER_FOR_IRWIN_AUGER''' - size:48kb - FreeCAD -[[File:32_HOPPER_FOR_IRWIN_AUGER.fcstd]]. STL (157kb)- [[File:32_HOPPER_FOR_IRWIN_AUGER.stl]]
File:33 HOPPER PART A.jpg |'''33 HOPPER PART A''' - size:48kb - FreeCAD -[[File:33_HOPPER_PART_A.fcstd]]. STL (110kb)- [[File:33_HOPPER_PART_A.stl]]
File:34 HOPPER PART B.jpg ‎|'''34 HOPPER PART B''' - size:48kb - FreeCAD -[[File:34_HOPPER_PART_B.fcstd]]. STL (72kb)- [[File:34_HOPPER_PART_B.stl]]
File:35 HOPPER SIDE SQ.jpg ‎|'''35 HOPPER SIDE SQ''' - size:48kb - FreeCAD -[[File:35_HOPPER_SIDE_SQ.fcstd]]. STL (48kb)- [[File:35_HOPPER_SIDE_SQ.stl]]
File:36 HOPPER TOP EXPANDED SQ R.jpg ‎|'''36 HOPPER TOP EXPANDED SQ R''' - size:48kb - FreeCAD -[[File:36_HOPPER_TOP_EXPANDED_SQ_R.fcstd]]. STL (3kb)- [[File:36_HOPPER_TOP_EXPANDED_SQ_R.stl]]
File:37_HOPPER_TOP_EXPANDED_SQ.jpg ‎|'''37_HOPPER_TOP_EXPANDED_SQ''' - size:null - FreeCAD -[[File:37_HOPPER_TOP_EXPANDED_SQ.fcstd]]. STL (3kb)- [[File:37_HOPPER_TOP_EXPANDED_SQ.stl]]
File:38 HOPPER TOP SQ.jpg ‎|'''38 HOPPER TOP SQ''' - size:48kb - FreeCAD -[[File:38__HOPPER_TOP_SQ.fcstd]]. STL (2kb)- [[File:38__HOPPER_TOP_SQ.stl]]
File:39 HOPPER TRANSISTION RD 1.jpg|'''39 HOPPER TRANSISTION RD 1''' - size:48kb - FreeCAD -[[File:39_HOPPER_TRANSISTION_RD_1.fcstd]]. STL (991kb)- [[File:39_HOPPER_TRANSISTION_RD_1.stl]]
File:40 HOPPER TRANSISTION SQ.jpg|'''40 HOPPER TRANSISTION SQ''' - size:48kb - FreeCAD -[[File:40_HOPPER_TRANSISTION_SQ.fcstd]]. STL (113kb)- [[File:40_HOPPER_TRANSISTION_SQ.stl]]
File:21 CORNER RT V5 HOPPER CASE.jpg ‎|'''21 CORNER RT V5 HOPPER CASE''' - size:48kb - FreeCAD -[[File:21_CORNER_RT_V5_HOPPER_CASE.fcstd]]. STL (13kb)- [[File:21_CORNER_RT_V5_HOPPER_CASE.stl]]
File:22 COUPLER D SHAFT IRWIN.jpg ‎|'''22 COUPLER D SHAFT IRWIN''' - size:48kb - FreeCAD -[[File:22_COUPLER_D_SHAFT_IRWIN.fcstd]]. STL (57kb)- [[File:22_COUPLER_D_SHAFT_IRWIN.stl]]
File:23 COUPLER HEX SHAFT.jpg ‎|['''23 COUPLER HEX SHAFT''' - size:48kb - FreeCAD -[[File:23_COUPLER_HEX_SHAFT.fcstd]]. STL (50kb)- [[File:23_COUPLER_HEX_SHAFT.stl]]

File:42 Part 20a case.jpg |'''42 Part 20a case''' - size:48kb - FreeCAD -[[File:f42_Part__20a_case.fcstd]]. STL (109kb)- [[File:42_Part__20a_case.stl]]

File:64 Part 49 funnel.jpg |'''64 Part 49 funnel''' - size:48kb - FreeCAD -[[File:64_Part_49_funnel.fcstd]]. STL (82kb)- [[File:64_Part_49_funnel.stl]]

File:68 V6 CASE 11-5-15.jpg ‎ ‎ ‎|'''68 V6 CASE 11-5-15''' - size:48kb - FreeCAD -[[File:68_V6_CASE_11-5-15.fcstd]]. STL (291kb)- [[File:68_V6_CASE_11-5-15.stl]]
File:69 V6 CASE 11-8-15.jpg ‎ ‎|'''69 V6 CASE 11-8-15''' - size:48kb - FreeCAD -[[File:69_V6_CASE_11-8-15.fcstd]]. STL (281kb)- [[File:69_V6_CASE_11-8-15.stl]]

File:LFX_M4 Nuts.jpg|'''LFX_M4 Nuts''' - size:nullkb - FreeCAD -[[LFX_M4 Nuts.fcstd]]

File:LFX_xxx.jpg|'''LFX_xxx''' - size:nullkb - FreeCAD -[[LFX_xxx.fcstd]]

==spooler unsorted==

</gallery>

missing image for part 20, 28, 32

Images for parts 36 and 37 appear to be duplicates, as do 43 and 65, 42 and 65, 36 and 37 appear to actually be duplicate files. Not sure what is going on there, but I misread the error so the duplicate will need to be deleted once we figure out why these are listed as separate parts but have the same file. Are they interchangable?

==Assembled Modules Gallery==
<gallery>
</gallery>

==Final Assembly Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

==Simplified Assets Gallery==
<gallery>
File:Lorem Ipsum.jpg|[[File:check.png]]'''Lorem Ipsum''' - size:null - FreeCAD -[[File:freecadfile.fcstd]]. STL - [[File:meshfile.stl]]
</gallery>

File:LFS M4 SHCS65mm.fcstd

2017-07-03T21:21:17Z

Kassie paul:

Kassie Log

2017-07-03T21:08:04Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, July 3, 2017 =
[[File:M4 SHCH 65mm.fcstd]]

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

=Older=

Wed, May 31, 2017

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

Sun, May 28, 2017

Began work on Lyman Extruder Spooler. Researched purchased parts.

Wed, May 24, 2017

Overview of filament extruder team meeting

Sun, May 21, 2017

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

Sat, May 20, 2017

Got caught up on Marcin's follow up video. Set up Work Log.

Mon, May 5, 2017

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

File:M4 SHCS 65mm.fcstd

2017-07-03T20:41:06Z

Kassie paul:

File:M4 SHCH 65mm.fcstd

2017-07-03T20:40:49Z

Kassie paul: Kassie paul uploaded a new version of File:M4 SHCH 65mm.fcstd

TYPO. Please Ignore.

File:M4 SHCH 65mm.fcstd

2017-07-03T20:37:52Z

Kassie paul: Kassie paul uploaded a new version of File:M4 SHCH 65mm.fcstd

TYPO. Please Ignore.

File:M4 SHCH 65mm.fcstd

2017-07-03T20:36:23Z

Kassie paul:

TYPO. Please Ignore.

Kassie Log

2017-07-03T20:35:27Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, July 3, 2017 =
[[File:M4 SHCH 65mm.fcstd]]

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

=Older=
[None]

Kassie Log

2017-07-03T20:34:27Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, July 3, 2017 =
[[File:M4 SHCS 65mm.fcstd]]

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

=Older=
[None]

File:M4 SHCH 65mm.fcstd

2017-07-03T20:32:19Z

Kassie paul:

Development Team Log

2017-07-03T19:02:28Z

Kassie paul: /* Tue Jul 4, 2017 */

{{Hint|To join team, see [[OSE Developers]] Page. Current working project is the Distributive Enterprise 3D Printer, [[D3D]]}}

=Active Developer Logs=
'''Reporting procedure: Please report in your log: (1) what you finished (2) what you are working on (3) any blocks or challenges. Please use <nowiki>{{Status Log|...}}</nowiki>. Then, in the list below, you can also copy those items so they are clearly visible - but make sure you update you log so that your current status is clearly visible to the world at all times.'''

#[[Oliver Log]]
#[[Jozef Log]]
#[[Dixon Log]]
#[[Roberto Log]]
#[[Abe Log]] -working on Filament Maker
#[[Jose Urra Log]] - D3D Website
#[[Cedric Log]]
#[[Laszlo Log]]
#[[Kassie Log]]
#[[Israel Log]]
#[[Ayo Log]]
#[[Chas Log]]
#[[Jean-Baptiste Log]]
#[[Marcin Log]]
#[[Richard Log]]
#[[Michael Altfield Log]]
#[[Will Log]]
#[[Christian Log]]

==Green Belt OSE Devs==
Developers who have successfully completed their 90 day term (120 development hours)
#[[Emmanouil Log]]

=OSE Developers=
See requirements for official [[OSE Developers]].

'''[[Timesheet]]''' is used to get Velocity Graph:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]
=Wed Jul 5, 2017=
<html><iframe src="https://docs.google.com/presentation/d/1QPrkDaIak28j-njEjqI-Hq-BCWMjK8ojUip2Uz8Y9Sc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1QPrkDaIak28j-njEjqI-Hq-BCWMjK8ojUip2Uz8Y9Sc/edit#slide=id.g1e7b70f2c2_0_1 edit]

=Tue Jun 27, 2017=
<html><iframe src="https://docs.google.com/presentation/d/1uJDfPEK1k_1P7_OPcTyYtHYfHzne1BsbXt-9PhJQTwQ/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1uJDfPEK1k_1P7_OPcTyYtHYfHzne1BsbXt-9PhJQTwQ/edit#slide=id.g1861bf60d5_0_6 edit]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/3mbaVb7AimY" frameborder="0" allowfullscreen></iframe></html>

=Tue Jun 20, 2017=
<html><iframe src="https://docs.google.com/presentation/d/1o2F7YR2qkCflY4Fu5RlvGQzHq7Phe0bFNh2BTbEwxuk/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1o2F7YR2qkCflY4Fu5RlvGQzHq7Phe0bFNh2BTbEwxuk/edit#slide=id.p edit]

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/h0BWbSfYcmc" frameborder="0" allowfullscreen></iframe></html>

=Tue Jun 13, 2017=
<html><iframe src="https://docs.google.com/presentation/d/1jTUmNrDoKLF5EVAlmP8YLt0jiyvuJ8QJ0aukiGoUEvc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1jTUmNrDoKLF5EVAlmP8YLt0jiyvuJ8QJ0aukiGoUEvc/edit edit]

=Thu Jun 8, 2017=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/8ioKHk7dHnA" frameborder="0" allowfullscreen></iframe></html>

<html><iframe src="https://docs.google.com/presentation/d/1QuRjz7SX_5A92eE-Wy0-fNE1HVdhv7jWtXCCt3MB-Kw/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/1QuRjz7SX_5A92eE-Wy0-fNE1HVdhv7jWtXCCt3MB-Kw/edit#slide=id.g22abf08404_12_29 edit]

=Past Meetings=
*[[Tue May 30, 2017]]
*[[Mon May 22, 2017]]
*[[Mon May 15, 2017]]
*[[Mon May 8, 2017]]
*[[Mon May 1, 2017]]
*[[Mon April 24, 2017]]
*[[Mon April 17, 2017]]
*[[Mon Apr 10, 2017]]
*[[Mon Apr 3, 2017]]
*[[Mon Mar 27, 2017]]
*[[Mon Mar 20, 2017]]
*[[Mon Mar 13, 2017]]
*[[Mon Mar 6, 2017]]
*[[Mon Feb 27, 2017]]
*[[Mon Feb 20, 2017]]
*[[Monday Feb 6, 2017]]

Kassie Log

2017-06-19T21:35:13Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

=Older=
[None]

Kassie Log

2017-06-19T21:34:59Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

=Older=
[None]

Kassie Log

2017-06-19T21:34:32Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, June 19, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd]]
[[File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd]]

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

=Older=
[None]

File:M4 BRASS HEAT INSERT PLACEHOLDER 2.fcstd

2017-06-19T21:29:54Z

Kassie paul:

File:M4 BRASS HEAT INSERT PLACEHOLDER 1.fcstd

2017-06-19T21:26:21Z

Kassie paul:

Kassie Log

2017-06-14T23:18:49Z

Kassie paul:

OSE Developers

2017-06-14T23:12:27Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}

{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building.

Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015.

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)

Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat.

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

{{department
| image = Profile Pic KP.jpg
| head = Kassie Paul
| title = OSE Dev Team member
| username =
| description =

[[Kassie Log | Kassie's Log]] [http://opensourceecology.org/wiki/User:Kassie_paul Kassie's User Page]

As a civil engineering student in beautiful Milwaukee, Wisconsin, Kassie explores the way communities interact with their built environment. She is drawn to the cooperative energy of Open Source Ecology. While working on the technical side of OSE's projects, she is learning about the ways open source hardware could help eliminate our current barriers to a sustainable, adaptable, economically feasible structure of civilization. She hopes that her CAD, explanation, organization, and documentation abilities add as much value to the team as possible. With a great deal of gratitude, she is happy to be able to collaborate with such a unique team.
[[File:Kassie Paul Badge.png|250px]]
}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

OSE Developers

2017-06-14T23:11:42Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}

{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building.

Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015.

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)

Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat.

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

{{department
| image = Profile Pic KP.jpg
| head = Kassie Paul
| title = OSE Dev Team member
| username =
| description =

[[Kassie Log | Kassie's Log]] [http://opensourceecology.org/wiki/User:Kassie_paul Kassie's User Page]

[[File:Kassie Paul Badge.png|250px]] As a civil engineering student in beautiful Milwaukee, Wisconsin, Kassie explores the way communities interact with their built environment. She is drawn to the cooperative energy of Open Source Ecology. While working on the technical side of OSE's projects, she is learning about the ways open source hardware could help eliminate our current barriers to a sustainable, adaptable, economically feasible structure of civilization. She hopes that her CAD, explanation, organization, and documentation abilities add as much value to the team as possible. With a great deal of gratitude, she is happy to be able to collaborate with such a unique team.

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

OSE Developers

2017-06-14T18:15:29Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}

{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building.

Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015.

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)

Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat.

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

{{department
| image = Profile Pic KP.jpg
| head = Kassie Paul
| title = OSE Dev Team member
| username =
| description =

[[Kassie Log | Kassie's Log]] [http://opensourceecology.org/wiki/User:Kassie_paul Kassie's User Page]

As a civil engineering student in beautiful Milwaukee, Wisconsin, Kassie explores the way communities interact with their built environment. She is drawn to the cooperative energy of Open Source Ecology. While working on the technical side of OSE's projects, she is learning about the ways open source hardware could help eliminate our current barriers to a sustainable, adaptable, economically feasible structure of civilization. She hopes that her CAD, explanation, organization, and documentation abilities add as much value to the team as possible. With a great deal of gratitude, she is happy to be able to collaborate with such a unique team.

[[File:Kassie Paul Badge.png|250px]]

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

OSE Developers

2017-06-14T18:13:27Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

“Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.”

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

“I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.”

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

“I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.”

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

“ I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.”

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}

{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

"Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building."

"Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015."

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

"I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)"

"Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat."

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

{{department
| image = Profile Pic KP.jpg
| head = Kassie Paul
| title = OSE Dev Team member
| username =
| description =

[[Kassie Log | Kassie's Log]] [http://opensourceecology.org/wiki/User:Kassie_paul Kassie's User Page]

As a civil engineering student in beautiful Milwaukee, Wisconsin, Kassie explores the way communities interact with their built environment. She is drawn to the cooperative energy of Open Source Ecology. While working on the technical side of OSE's projects, she is learning about the ways open source hardware could help eliminate our current barriers to a sustainable, adaptable, economically feasible structure of civilization. She hopes that her CAD, explanation, organization, and documentation abilities add as much value to the team as possible. With a great deal of gratitude, she is happy to be able to collaborate with such a unique team.

[[File:Kassie Paul Badge.png|250px]]

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

OSE Developers

2017-06-14T18:10:20Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

“Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.”

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

“I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.”

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

“I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.”

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

“ I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.”

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}

{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

"Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building."

"Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015."

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

"I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)"

"Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat."

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

{{department
| image = Profile Pic KP.jpg
| head = Kassie Paul
| title = OSE Dev Team member

[[Kassie Log | Kassie's Log]] [http://opensourceecology.org/wiki/User:Kassie_paul Kassie's User Page]

As a civil engineering student in beautiful Milwaukee, Wisconsin, Kassie explores the way communities interact with their built environment. She is drawn to the cooperative energy of Open Source Ecology. While working on the technical side of OSE's projects, she is learning about the ways open source hardware could help eliminate our current barriers to a sustainable, adaptable, economically feasible structure of civilization. She hopes that her CAD, explanation, organization, and documentation abilities add as much value to the team as possible. With a great deal of gratitude, she is happy to be able to collaborate with such a unique team.

[[File:Kassie Paul Badge.png|250px]]

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

File:Kassie Paul Badge.png

2017-06-14T18:09:47Z

Kassie paul:

OSE Developers

2017-06-14T17:42:36Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

“Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.”

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

“I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.”

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

“I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.”

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

“ I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.”

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}

{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

"Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building."

"Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015."

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

"I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)"

"Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat."

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

OSE Developers

2017-06-14T17:41:42Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

“Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.”

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

“I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.”

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

== Development Team ==
{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

“I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.”

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

== Development Team ==
{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

“ I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.”

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}
== Development Team ==
{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

"Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building."

"Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015."

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}

{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

"I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)"

"Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat."

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

OSE Developers

2017-06-14T17:31:00Z

Kassie paul:

{{RightTOC}}
{{Hint|Last Updated 1/17. '''Please study the [[Crash Course]] for overview of OSE and current priorities.''' To subscribe or unsubscribe from the Design Sprints list, please go to the [[Tech Team Culturing Survey]] page.}}

=Founder's TED Talk=
[[Marcin Jakubowski]] explains the Global Village Construction Set in his TED Talk.

Can't see the video below? Try: http://www.ted.com/talks/marcin_jakubowski.html

{{TED}}
=2017 Invitation Video=

<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SxYgF701w0M" frameborder="0" allowfullscreen></iframe></html>

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

=2017 Invitation=
==OSE Developers - Design + Documentation==
OSE Developers are the official members of the OSE Design or Documentation Teams, and the HR Generalist is responsible for recruiting OSE Developers. OSE is a globally distributed volunteer team of engineers, farmers, designers, documenters, builders, writers, marketers, and other interdisciplinarians. OSE developers commit a minimum of 10 hours per week to a coordinated development process on key OSE priorities, for a 3 month duration. It is also acceptable if the OSE Developer find a partner on their side to work with - such that their time requirement may be reduced from 10 hours to half of that time per week - while this pair still produce 10 hours of effort. This also helps us to encourage leadership on the OSE Developer's side, and greater collaboration. After a 3 month development period, OSE Developers have an option to continue to the next quarter.

For background purposes - we have been operating as a volunteer project with many ad-hoc contributors until 2017. We have discovered that for an audacious project with well-defined goals - we need a process and structure that can harness collaborators' contributions in a more effective way - for visible and tangible progress. As such, we have shifted to dedicated development teams as of the beginning of 2017. We are looking for team players who can move OSE along its [[Critical Path]] for the formal team of OSE Developers- while encouraging others to provide ad-hoc contributors by editing the wiki.

==Interdisciplinary Approach==
We are looking for diverse skill sets. Do you have the skill set to become a meaningful contributor? Our only requirement is that you have an open mind and willingness to learn new things - and the required time to make a meaningful contribution. We expect OSE Developers to become immersed in the new paradigm of open source product development. We are building 12-24 person Working Teams which result in clearly visible development velocity. An interdisciplinary team is needed because many projects include elements of mechanics, electronics, hydraulics, sensors, software, etc. In addition, graphics, media, marketing, and business development skills are used in taking products to full releases as [[Distributive Enterprise]].

==Solving Wicked Problems==
Our long term goal is to create a world class training center for open source movement entrepreneurs - for solving wicked problems. Since many problems are founded in artificial scarcity - our approach is to create material abundance - while regenerating the environment. At the same time, we are training people in interdisciplinary skill sets - as only an interdisciplinary perspective can lead people to solving wicked problems. We are in the business of ending poverty and war - where poverty includes poverty of the mind - and war includes the war on the environment. Our mission is lofty, and our approach is grounded. We are looking for volunteers who can thrive in such a learning environment.

==Looking for Dedicated Contributors==
The title of ''volunteer'' still has formal requirements of collaboration on active working teams, and is not to be taken lightly. The expectations are similar to the requirements in a 'regular job,' with timelines, project plans and team responsibilities. OSE Developers are selected for participation based on successful completion of the application process - up to a basic proficiency test in open source computer aided design (CAD) - the [[OSE FreeCAD Test]]. The application process is maintained by the HR Team, and the on-boarding process is shown at the [[OSE Developer Initial Application]] page.

The OSE Developer is the highest status of OSE development collaboration. The title of OSE Developer marks the official development team that is working actively on the [[OSE Roadmap]]. Otherwise, ad-hoc contributors are welcome to contribute to the [[OSE Wiki]], the official development platform of the OSE project.

==Team Structure==

Development Teams must include a [[Heavyweight Product Manager]], a [[Product Owner]], and a [[Process Manager]] to steward a [[Concurrent Engineering]] process. Member requirements are an open mind - as any of the technical skills, such as [[FreeCAD 101]], can be learned with a few hours of practice. We are looking for a mindset of avid learning across different disciplines as the primary requirement. We are positioning this opportunity as a chance to learn diverse technical skills.

==Module-Based Design==
An effective team works on projects taken from the perspective of module-based design - where each project is broken down into modules that can be developed in parallel according to the task breakdown of the [[Development Template]]. Modularity applies not only to technical, but also to organizational, business, and marketing areas. Development cycles are run on a quarterly basis (the 90 day period), with the intended outcome being a product release. If OSE Developers are required to contribute 10 hours per week, then the 12 person team is effectively a 3-person full time equivalent. This is the minimum required for visible progress. Once a well-performing team is established, new teams may form. The minimum number of Developers for starting a new development team is 12. Our goal is to create 12 teams of 12 by end of 2017.

==Roadmap==
The project teams work together on current [[Development Priorities]] and only on the official tasks at the [[Critical Path]] and consistent with the 20 year [[OSE Roadmap]]. Other projects may be taken up independently by contributing to the OSE Wiki, but core resources will be allocated only to the Critical Path. OSE Developers do not propose new projects, but execute on tasks on the [[Critical Path]]. As such, we are asking for team players who are aligned with the greater vision of OSE. The Critical Path involves milestones around machine building as a basis, with other applications such as agriculture and the [[Seed Eco-Home]] - the latter being a collaboration with the [[Open Building Institute]].

=Application=
To apply -

'''Prior to applying, please read the above information carefully and look at the links prior to your first interview. We cannot at this time accommodate exploratory phone conversations prior to the interview - as we track our recruiting process and the first step is filling out an initial application. If you feel that important details have been left out of the Developer invitation - please email HR at opensourceecology dot org and ask for clarification, and we can add those details to this description. We ask you for your cooperation with our process. We will ask for your feedback on our approach during the initial interview.

To apply, please go to the [[OSE_Developer_Initial_Application]].''' Fill out the application form, email HR once you have done so, and then we can set up a first interview at your earliest convenience. 90 day development duration begins from the time that a candidate completes the OSE FreeCAD Test. If you have an earnest drive to make a better world - and are willing to develop and use a powerful skill set to accomplish that task - then you will feel right at home in our environment.

=Job Description=
OSE Developers work as a team, dividing these various tasks between team members:
*Learning a basic toolchain for designing open source hardware using open source software
*Working on a dedicated open source product development effort as part of an interdisciplinary team
*Learning basic proficiency in FreeCAD. FreeCAD-related tasks may include:
:*Producing build instructionals using FreeCAD files
:*Producing fabrication drawings
:*Making modifications in existing designs
:*Creating designs from scratch
:*Producing 3D printing files
:*Creating visual Bills of Materials
:*Creating exploded part diagrams
*Learning open source tools and protocols for effective, globally-distributed design collaboration
*Doing basic calculations of cost, weight, production rates, and other critical parameters towards open source products geared at creating [[Distributive Enterprise]]
*Researching sourcing of materials
*Learn basic proficiency in rendering and animation using Blender
*Learning basic proficiency in vector and raster graphics to produce supporting graphics using GIMP and Inkscape
*Learning basic video production competency using Kdenlive to produce instructionals
*Learning basics of screencasting to produce video instructionals
*Using Inkscape or other open source toolchains to produce cutting files for laser cutters,routers and CNC torch tables
*Documenting work done and hours spent in a Work Log on an ongoing basis
*Writing scripts for instructionals, publishing step-by-step instructionals, and assisting in the publishing of design guides
*Communicating with other team member on problem solving
*Prototyping of ongoing development work using 3D printing, scale models, etc (if possible)
*Many tasks are technical, but writing, marketing, video production, desktop publishing, communication, website development, software programming, and many other tasks are included in the process

=Onboarding Flowchart=

(you can click on the underlined links for more info)

<html><iframe src="https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

[https://docs.google.com/presentation/d/10LYNncpAWNu1MVPcYLPDcfHp4tIPBbPFp2f47JPeOoc/edit#slide=id.g196dae00fd_0_70 edit]

=Team Numbers=
This is tracking team size and effort over time:

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/pubchart?oid=995627528&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1wEP0FUf8pABS3NdsZdVQCF08NtkeflgE6W0l74E1RFk/edit#gid=0 edit]

Breakdown by contributor, May 8, 2017. First Star awarded to Emmanouil for the first completed 120 hours of development time (90 day or quarterly cycle). Total development time since beginning of tracking: 1080 hours.

<html><iframe width="600" height="371" seamless frameborder="0" scrolling="no" src="https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/pubchart?oid=1219958918&format=interactive"></iframe></html>

[https://docs.google.com/spreadsheets/d/1gL21Ojxd0Ow_SM465j-qtiRdiOPQAelk9TbPrAZi6qU/edit#gid=1897492623 edit]

=OSE Developer Bios=

== HR Generalist in Training ==
{{department
| image = Profile pic richie.jpg
| head = Richard White
| title = Human Resources Generalist in training.
richardallenwhite.raw@gmail.com
| username =
| description =
[[Richard_Log|Richard's Log]]

“Open Source hardware gives us the potential to innovate exponentially. It is a way to move to an economy of abundance from one of artificial scarcity.”

Richard is a real estate investor from Northwest Indiana with years of experience in asset management, creative finance, accounting, advertising, tenant management and construction. He is looking to expand his skills in Human Resources while contributing to a dynamic organization which seeks to fundamentally change the way we share ideas and innovation through open source design and distributive enterprise.

[[Image:HR 001 RICHARD WHITE badge 1056 x 512px v1-1a backup backup.png|250px]]

}}

== Development Team ==
{{department
| image = Chas Murillo pic.jpg
| head = Chas Murillo
| title = OSE Dev Team member.
csmurill@mtu.edu
| username =
| description =
[[Chas log|Chas's Log]]

“I'm contributing to OSE because I see the value in everyone having access to resources to provide a living for one's self and community. I also intend to utilize the information gathered to build my own affordable seed-eco home and create my own home workshop and distributed enterprise.”

I'm an Electrical Engineer by training from Michigan Tech. I'd like to help rebuild America's infrastructure with the help of open source principles and am interested in making America Energy Independent as one of my career goals. I firmly believe in the possibilities of open source hardware for bettering my life and the lives of others. My skills include basic I.T., power electronics, power systems, and motor drives as well as some basic business skills.

[[Image:010 CHAS MURILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

== Development Team ==
{{department
| image = Roberto pic.jpg
| head = Roberto Jaramillo
| title = OSE Dev Team member.
robinmaster18@gmail.com
| username =
| description =
[[Roberto Log|Roberto's Log]]

“I'm contributing to OSE because It's the most interesting project that I've ever seen. It combines nature, people, technology in a practical and holistic way. I was looking for a place where to create together with others, freely and openly.”

I think my most relevant skill is my learning capacity.

[[Image:009 ROBERTO JAMARILLO BADGE free cad certified 1056 x 512px v3-1a (3) backup.png|250px]]

}}

== Development Team ==
{{department
| image = Cedric Profil pic.jpg
| head = Cedric Lemofack
| title = OSE Dev Team member.
legocefran@yahoo.fr
| username =
| description =
[[Cedric Log|Cedric's Log]]

“ I have a background on mathematical
and physical science. With it, I'm interested on variety of domains in
technology, from computer science to mechanics, by passing through
electronics. I discovered Linux operating system when I began my
university classes, and with this event began a long journey through
the world of open source software. The concept of open source is very
interesting for me and I choose to use in preference the products which
respect this way of working. I think that I'm on another journey with
the Open Source Ecology, which is based on the same principles, but the
very big difference is that the products here are to be produced in the
real world. I'm in the domain of teaching in technology and I want to
benefit from the OSE to help bringing technology learning in another
step.”

I have a Master Degree in Mechanics Modelling (Structural mechanics,
CFD and system dynamics). I also have a BTS (2 year Degree) in
Electronics and Computer science. I'm now a teacher in Engineering
science.

[[Image:003 CEDRIC BADGE.png|250px]]

}}
== Development Team ==
{{department
| image = Jean baptiste pic.jpg
| head = Jean-Baptiste Vervaeck
| title = OSE Dev Team member.
jverveack@gmail.com

website: www.foozledesign.com
| username =
| description =
[[Jean-Baptiste Log|Jean-Baptiste's Log]]

"Collaborating with OSE members has helped me realize the enormous potential Open Source principles have for dismantling and replacing the current mainstream economic paradigm by providing people with similar quality tools for the production of their material environment that require fewer resources and rely more on cooperative community participation and knowledge building."

"Jean-Baptiste is a freelance graphic designer living in Santiago, Chile and has worked on a wide variety of projects for both local and overseas clients for nearly a decade. In recent years he's been focusing his efforts on helping start ups, small and upcoming businesses materialize their ideas. He has a great deal of experience using Illustrator & Photoshop and is knowledgeable in Indesign, Inkscape, GIMP and is in the process of learning FreeCAD.

He has been working with Open Source Ecology as a remote collaborator since 2013 and has contributed over a dozen infographics for some of the 50 machines that form part of the Global Village Construction Set (GVCS) and has helped to establish some of OSE's preliminary graphic guidelines among other graphic assets over the years. He was also part of the team that documented the one day assembly process for the Ironworker 3.0 in 2013 and was the Graphic Team's Lead for the Pattern Language Icon design efforts in 2015."

[[Image:006 JEAN BAPTISTE BADGE.png|250px]]

}}
== Development Team ==
{{department
| image = Jozef.JPG
| head = Jozef Mikler III
| title = OSE Dev Team member.
jozefmikler@gmail.com

| username =
| description =
[[Jozef Log|Jozef's Log]] [http://opensourceecology.org/wiki/User:JMikler Jozef's User Page]

"I want to contribute to OSE because it's a front row seat. I want to support a radical ethic, see the development of liberating and sharable technologies, stick it to the man, and do so while growing really great tomatoes. I wanted to learn a bundle of tools for design and fabrication, and here's an opportunity to do so in the coolest community while benefiting others. (Also, come on, I just want one these post-apocalyptic Mad Max looking tractors.)"

"Jozef spent most of his undergrad in classics and philosophy (BA in Liberal Arts and Culture '07), and education (MA in Teaching '11). He taught logic and English in high schools in Florida, Idaho, and Indonesia; and road-tripped across the US while working for an online school. He wrote a rhetoric text for a series of African schools, which wanted to foster debate and critical thinking. Recently he decided to work on a small bundle of hard skills: he completed a vocational welding certificate last year, started taking workshops at a makerspace, and is now learning the OSE toolchain. In the future he'd like to reinvent K-12 education by modeling it on the tradition, production, and infrastructure of a family, and scaling it to a model of the tradition, production, and infrastructure of a city. He plans to build his own tiny house and open-source sailboat."

[[File:Jozef Mikler's OSE FreeCAD Badge.png|250px]]

}}

=Former Team Members=
See [[OSE Developer Former Team Members]].

=Recent Builds=

This is our first iteration of the Seed Eco-Home and Aquaponic Greenhouse - each built in 5 days - and the next iteration of the build is planned for the fourth quarter of 2017:

<html>

<iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FOpenSourceEcology%2Fposts%2F10155491735051562%3A0&width=500" width="500" height="443" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe>

</html>

=Links=
*To see progress of the Development Team - see [[Development Team Log]]
*[[GVCS TED Talk]] by Founder
*[[New Yorker]] article
*Key economic transformation philosophy - [[Distributive Enterprise]]
*20 Year [[Roadmap]]

Kassie Log

2017-06-12T23:45:33Z

Kassie paul:

Kassie Log

2017-06-12T23:45:07Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part and simplified part files.

[[File:M4 Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]]

[[File:M4 SHCS 30mm.fcstd]]

[[File:M4 BRASS HEAT INSERT.fcstd]]

[[File:M3 SHCS 8mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

File:M3 SHCS 8mm.fcstd

2017-06-12T23:43:51Z

Kassie paul: Fastenal 11103296

Fastenal 11103296

File:M4 BRASS HEAT INSERT.fcstd

2017-06-12T23:42:48Z

Kassie paul: McMaster Carr 94180A331

McMaster Carr 94180A331

File:M4 SHCS 30mm.fcstd

2017-06-12T23:41:25Z

Kassie paul: Fastenal 11103315

Fastenal 11103315

Kassie Log

2017-06-12T23:39:55Z

Kassie paul:

{{RightTOC}}
[http://opensourceecology.org/wiki/User:Kassie_paul User Page]

[http://opensourceecology.org/wiki/Volunteer_Timesheet Volunteer Timesheet]

[http://opensourceecology.org/wiki/Development_Team_Log Development Team] This page includes meeting information as well as links to other dev team member logs.

Please feel free to contact me with any questions, comments or concerns.

= Mon, June 12, 2017 =

Updated [https://docs.google.com/spreadsheets/d/1SiBHqAaaL1IJwNs2ImVnpo-DmpBuyCk18k4oh7Ogj1s/edit?usp=sharing Spooler Master Part Index] with the following part and simplified part files.

[[File:M4 Washer.fcstd]] [[http://opensourceecology.org/wiki/File:M4_Washer.fcstd]]

[[File:M4 SHCS 50mm.fcstd]] [[http://opensourceecology.org/wiki/File:M4_SHCS_50mm.fcstd]]

= Wed, May 31, 2017 =

Lyman Filament Extruder Spooler Bill of Materials: [https://docs.google.com/spreadsheets/d/1W9-Zy71G5UevrLO1FIq6ajB-GBSyQ_79ESqB4_fVs6k/edit?usp=sharing Spooler BOM]
Embeded on [http://opensourceecology.org/wiki/Lyman_Filament_Extruder Extruder Page]

= Sun, May 28, 2017 =

Began work on Lyman Extruder Spooler. Researched purchased parts.

= Wed, May 24, 2017 =

Overview of filament extruder team meeting

= Sun, May 21, 2017 =

Read materials on the development process, past D3D meetings, scrum, wiki editing, and log keeping.

= Sat, May 20, 2017 =

Got caught up on Marcin's follow up video. Set up Work Log.

= Mon, May 5, 2017 =

Completed the OSE FreeCAD exam. [https://youtu.be/qGxIoSjbPH0 FreeCAD Test Video]

File:M4 SHCS 50mm.fcstd

2017-06-12T23:38:12Z

Kassie paul: Fastenal 11103319

Fastenal 11103319

Kassie Log

2017-06-12T23:35:28Z

Kassie paul:

Kassie Log

2017-06-12T23:32:56Z

Kassie paul: