Open Source Ecology - User contributions [en]

Lego Log

2017-05-25T17:56:59Z

Legocef:

{{Status|New (from Prusa) extruder mount video|Mk8 extruder and mount video|New (from Prusa) extruder LAI}}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 25, 2017 =

Uploaded the Tutorial on how I made some video making stuffs on kdenlive [https://www.youtube.com/playlist?list=PLFs4-5d3gY5pbBWYhhRr80fdAwbqlKcFv]

Reading on the new orientation projects of OSE :
-Filament extruder
- CNC torch table

(7h)

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=B8SC7Ou6ZdY]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

New D3D extruder [[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated

(6h)

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-11T19:37:10Z

Legocef:

{{Status|New (from Prusa) extruder mount video|Mk8 extruder and mount video|New (from Prusa) extruder LAI}}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=B8SC7Ou6ZdY]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

New D3D extruder [[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated

(6h)

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-11T19:34:37Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=B8SC7Ou6ZdY]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

New D3D extruder [[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated

(6h)

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Prusa i3 mk2 extruder adapted.fcstd

2017-05-11T19:25:29Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.fcstd

[[File:Prusa_i3_mk2_extruder_adapted.png]]

Lego Log

2017-05-11T19:22:21Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

New D3D extruder [[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-11T19:21:47Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

New D3D extruder [[Prusa_i3_mk2_extruder_adapted.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Kdenlive D3D extruder mount V2.kdenlive

2017-05-11T19:19:35Z

Legocef:

Lego Log

2017-05-11T19:18:43Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-11T19:17:23Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive archived source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.tar.gz]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-11T19:12:57Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Thu May 11, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder (New version form Pusa) mount instructions video in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5ozS70QF2hQ_lfTwOLcClXR]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount_V2.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-06T07:39:56Z

Legocef:

{{Status|Extruder BOMs|Mk8 extruder and mount video|New (from Prusa) extruder mount video }}

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:D3D Extruder Sensholder.fcstd

2017-05-05T19:26:22Z

Legocef:

File:D3D Extruder.fcstd

2017-05-05T19:25:44Z

Legocef: Legocef uploaded a new version of File:D3D Extruder.fcstd

[[File:D3D_Extruder.png]]

File:D3D Extruder.png

2017-05-05T19:23:45Z

Legocef: Legocef uploaded a new version of File:D3D Extruder.png

Lego Log

2017-05-05T19:22:03Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Wed May 05, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

Sensor holder updated [[File:D3D_Extruder_Sensholder.fcstd]] updated

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-05-05T15:06:58Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Wed May 05, 2017 =

D3D extruder (from mk8 and Prusa) BOMs done [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0]

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Kdenlive D3D extruder mount.kdenlive

2017-04-24T22:54:36Z

Legocef:

Lego Log

2017-04-24T22:53:35Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[File:Kdenlive_D3D_extruder_mount.kdenlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-24T22:52:25Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 24, 2017 =

Uploaded the compiled source file in one video [https://www.youtube.com/watch?v=IT06ap9I0Iw&t=10s]

Uploaded on Youtube, videos of D3D extruder mount instructions vidéo in a playlist [https://www.youtube.com/playlist?list=PLFs4-5d3gY5rxn4pZKbzQDtm9e41Wg7C8]

Uploaded kdenlive source file for the D3D extruder mount instructions : [[Kdenlive_D3D_extruder_mount.denlive]]

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:D3D Extruder.png

2017-04-24T22:42:06Z

Legocef: Legocef uploaded a new version of File:D3D Extruder.png

File:D3D Extruder.fcstd

2017-04-24T19:39:33Z

Legocef: Legocef uploaded a new version of File:D3D Extruder.fcstd

[[File:D3D_Extruder.png]]

File:D3D Extruder.png

2017-04-24T19:39:29Z

Legocef: Legocef uploaded a new version of File:D3D Extruder.png

Lego Log

2017-04-24T19:38:00Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 24, 2017 =

D3D extruder [[File:D3D_Extruder.fcstd]] updated

D3D extruder mount instructions updated[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-18T00:12:18Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Tu Apr 18, 2017 =

D3D extruder mount instructions [https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-18T00:11:52Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Tu Apr 18, 2017 =

D3D extruder mount instructions

[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions

[https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-18T00:11:14Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 03, 2017 =

D3D extruder mount instructions

[https://docs.google.com/presentation/d/1MspJVLUEJl2FAFe7SAblpfUKZfIpdPqkT_aSQlkB9p0/edit#slide=id.p]

Adapted Prusa i3 mk2 extruder mount instructions

[https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.p
]
= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-03T17:03:02Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM [https://docs.google.com/spreadsheets/d/1Az90FDSQzo5WIGfb_WnwL-QbqFSomYRluIWPZdfMQhQ/edit#gid=0] of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-03T15:51:09Z

Legocef: /* Mon Apr 03, 2017 */

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/] )

Began BOM of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-04-03T15:38:02Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Apr 03, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

Search docs about an Inductive Sensor on RAMPS 1.4 controller board. (interesting how-to : [http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/]

Began BOM of the new extruder

(8h00)

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Prusa i3 mk2 extruder adapted.fcstd

2017-04-03T15:37:36Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.fcstd

[[File:Prusa_i3_mk2_extruder_adapted.png]]

File:Prusa i3 mk2 extruder adapted.png

2017-04-03T15:37:25Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.png

Lego Log

2017-03-27T18:50:53Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe. (1h30)

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-03-27T18:50:21Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Mar 21, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated with height probe.

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Prusa i3 mk2 extruder adapted.png

2017-03-27T18:47:39Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.png

File:Prusa i3 mk2 extruder adapted.fcstd

2017-03-27T18:47:17Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.fcstd

[[File:Prusa_i3_mk2_extruder_adapted.png]]

Lego Log

2017-03-27T17:51:39Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded. Original file from [https://grabcad.com/library/original-prusa-i3-mk2-printer-1]
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-03-27T12:16:13Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] updated (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-03-27T12:15:43Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] uploaded (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] updated
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-03-27T12:15:19Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Mon Mar 27, 2017 =
Prusa i3 mk2 extruder mount instructions [https://docs.google.com/presentation/d/1eYUnmKPkhnRkDrW-Z1REZMu6nhgbBfRhc5Sdav81sa8/edit#slide=id.g213ee400f8_0_379] uploaded (in progress)

= Sun Mar 26, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Prusa i3 mk2 extruder adapted.fcstd

2017-03-27T11:22:37Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.fcstd

[[File:Prusa_i3_mk2_extruder_adapted.png]]

File:Prusa i3 mk2 extruder adapted.png

2017-03-27T11:21:19Z

Legocef: Legocef uploaded a new version of File:Prusa i3 mk2 extruder adapted.png

Lego Log

2017-03-26T22:09:01Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

<html><iframe src="https://scrumy.com/d3d" height=350 width=750></iframe></html>

= Sun Mar 27, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

Lego Log

2017-03-26T22:06:19Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

= Sun Mar 27, 2017 =
[[File:Prusa_i3_mk2_extruder_adapted.fcstd]] uploaded
= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:Prusa i3 mk2 extruder adapted.fcstd

2017-03-26T22:05:15Z

Legocef:

[[File:Prusa_i3_mk2_extruder_adapted.png]]

File:Prusa i3 mk2 extruder adapted.png

2017-03-26T22:05:03Z

Legocef:

File:Prusa i3 mk2 extruder adapted.fcstd

2017-03-26T22:03:30Z

Legocef:

Lego Log

2017-03-20T23:46:24Z

Legocef:

{{RightTOC}}
'''[[Timesheet]]'''

[[Emmanouil Log]] [[Marcin Log]] [[Jonathan Log]] [[Brian Log]] [[Jose Log]].

= Mon Mar 21, 2017 =
[[File:D3D_Extruder.fcstd]] uploaded.

= Mon Mar 13, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) updated

= Sat Mar 04, 2017 =
[[File:D3D_Extruder_Only.fcstd]] (without screws and mount) and [[File:D3D_heated_bed.fcstd]] CAD file done with rendered pictures.

= Mon Feb 27, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. CAT 5 connections done between the controller and the parts.

= Sun Feb 26, 2017 =

Updated the D3D Controller Slide [https://docs.google.com/presentation/d/16gYPbV7rrAa3SgwIzilxaqd1lnfmIxAzUHEO_AEAgcE/edit?ts=58b0c46d#slide=id.g1eb0013e34_0_23], so that we can use the Ramps 1.4 controller. Edited the connections between the controller and other parts (sensors, motors, ...). Next work will be CAT 5 cables between the controller and the parts.

= Mon Feb 20, 2017 =

[[File:Test_bolted_corner_cube_(LC).fcstd]] cube file created with a 8-hole square tubing from [[File:FreeCAD_Tubing_Library.tar.gz]] using Freecad.

File:D3D Extruder.fcstd

2017-03-20T23:45:54Z

Legocef:

[[File:D3D_Extruder.png]]

File:D3D Extruder.png

2017-03-20T23:45:42Z

Legocef:

File:D3D Extruder.fcstd

2017-03-20T23:44:15Z

Legocef: