Open Source Ecology - User contributions [en]

Leo Log

2013-08-03T19:13:24Z

Leo Riveron:

=Saturday, August 3, 2013=

Synced up with John. 

===TODO:===
Familiarize myself with John's log and what others are working on with the [[HydraFabber]].

=Thursday, August 1, 2013=

Updated the [[File:Spindle Mount.skp]] model with appropriate components and groups.

=Saturday, July 27, 2013=
Synced up with John and Marcin.

===TODO:===
* Take Spindle Mount file and group appropriately 
* Right click part > convert to component 
* The explosion of the spindle 

NOTE: Need to create another mount for the Laser.

=Friday, July 12, 2013=

Made the [[File:Spindle Mount.skp]] model in Sketchup.

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-08-03T19:13:06Z

Leo Riveron:

=Saturday, August 3, 2013=

Synced up with John. 

===TODO:=== Familiarize myself with John's log and what others are working on with the [[HydraFabber]].

=Thursday, August 1, 2013=

Updated the [[File:Spindle Mount.skp]] model with appropriate components and groups.

=Saturday, July 27, 2013=
Synced up with John and Marcin.

===TODO:===
* Take Spindle Mount file and group appropriately 
* Right click part > convert to component 
* The explosion of the spindle 

NOTE: Need to create another mount for the Laser.

=Friday, July 12, 2013=

Made the [[File:Spindle Mount.skp]] model in Sketchup.

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-08-03T19:12:07Z

Leo Riveron:

=Saturday, August 3, 2013=

Synced up with John. 

===TODO:===
Familiar myself with John's log and what others are working on.

=Thursday, August 1, 2013=

Updated the [[File:Spindle Mount.skp]] model with appropriate components and groups.

=Saturday, July 27, 2013=
Synced up with John and Marcin.

===TODO:===
* Take Spindle Mount file and group appropriately 
* Right click part > convert to component 
* The explosion of the spindle 

NOTE: Need to create another mount for the Laser.

=Friday, July 12, 2013=

Made the [[File:Spindle Mount.skp]] model in Sketchup.

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-08-03T16:36:12Z

Leo Riveron:

=Thursday, August 1, 2013=

Updated the [[File:Spindle Mount.skp]] model with appropriate components and groups.

=Saturday, July 27, 2013=
Synced up with John and Marcin.

===TODO:===
* Take Spindle Mount file and group appropriately 
* Right click part > convert to component 
* The explosion of the spindle 

NOTE: Need to create another mount for the Laser.

=Friday, July 12, 2013=

Made the [[File:Spindle Mount.skp]] model in Sketchup.

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

File:Spindle Mount.skp

2013-08-03T16:35:35Z

Leo Riveron: Leo Riveron uploaded a new version of "File:Spindle Mount.skp": Made groups and components out of each part.

CNC Circuit Mill Spindle v0.5

This is the basic design with just the holes made for the spindle based on the spindle parts from the [[http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Drawing]]

Leo Log

2013-07-27T20:36:55Z

Leo Riveron:

=Saturday, July 27, 2013=
Synced up with John and Marcin.

===TODO:===
* Take Spindle Mount file and group appropriately 
* Right click part > convert to component 
* The explosion of the spindle 

NOTE: Need to create another mount for the Laser.

=Friday, July 12, 2013=

Made the [[File:Spindle Mount.skp]] model in Sketchup.

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-13T04:33:13Z

Leo Riveron:

=Friday, July 12, 2013=

Made the [[File:Spindle Mount.skp]] model in Sketchup.

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

File:Spindle Mount.skp

2013-07-13T04:31:28Z

Leo Riveron:

CNC Circuit Mill Spindle v0.5

This is the basic design with just the holes made for the spindle based on the spindle parts from the [[http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Drawing]]

File:Spindle Mount.skp

2013-07-13T04:30:45Z

Leo Riveron: CNC Circuit Mill Spindle v0.5 This is the basic design with just the holes made for the spindle based on the spindle parts from the Drawing http://mtm.cba.mit.edu/toolheads/spindle/makeit.html

CNC Circuit Mill Spindle v0.5

This is the basic design with just the holes made for the spindle based on the spindle parts from the [[Drawing http://mtm.cba.mit.edu/toolheads/spindle/makeit.html]]

Leo Log

2013-07-13T04:04:29Z

Leo Riveron:

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-13T03:27:52Z

Leo Riveron:

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).
The width of each piece is .236" (or 6mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Llan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-12T03:26:55Z

Leo Riveron:

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm).

===TODO: Build model in Sketchup===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Llan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-12T03:26:00Z

Leo Riveron:

=Thursday, July 11, 2013=
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:

Top hole
* Holds DC Motor with OD = 1.083"
* Flush with the bottom of the Motor

Middle hole
* Holds the top part of the Bronze Bushing with OD = 5/8"
* 1.181" below the Top Hole part

Bottom hole
* Holds the bottom part of the Bronze Bushing (^OD = 5/8")
* 1.102" below the Middle hole part

The center of all 3 holes are .866" from the back of the mount.
The width of the mount is 1.339" (or 39mm)

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Llan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-06T17:00:07Z

Leo Riveron:

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact Llan (or McMaster and SDP/SI) to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-06T16:37:13Z

Leo Riveron:

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

===TODO: Need to contact McMaster and SDP/SI to get specs===

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-06T16:14:59Z

Leo Riveron:

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider: ??
* Length of bushing: 1 1/2"
* Length of rigid coupler: ??

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-06T16:10:11Z

Leo Riveron:

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

* Length of flexible spider:
* Length of bushing: 1 1/2"
* Length of rigid coupler:

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-06T16:08:57Z

Leo Riveron:

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

Leo Log

2013-07-06T15:20:27Z

Leo Riveron:

=Sat, May 18, 2013=
Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]].

=Sat, June 29, 2013=
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT]

*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor]

*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID]

*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID]

*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider]

*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T]

*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged]

*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L]

*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L]

*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore]

===TODO: Build a Sketchup model for the mount using the dimensions from the parts.===

=Sat, July 6, 2013=
Building the spindle mount.

* OD of flexible spider: 5/8"
* OD of bushing: 5/8"
* OD of rigid coupler: 1/2"

Leo Log

2013-06-29T16:28:33Z

Leo Riveron:

File:Hydraulic Control Mounting Plate.skp

2013-06-15T18:38:58Z

Leo Riveron: Leo Riveron uploaded a new version of "File:Hydraulic Control Mounting Plate.skp"

File:Hydraulic Control Mounting Plate.skp

2013-06-15T18:23:21Z

Leo Riveron:

File:Leo-Sketchup-Test.skp

2013-06-15T15:45:47Z

Leo Riveron: sketchup test cube

sketchup test cube