Open Source Filament Extruders

2016-10-24T15:01:43Z

Tobben: Redirected page to Filament extruder

#REDIRECT [[Filament extruder]]

Filament extruder

2016-10-24T14:36:58Z

Tobben:

Tobben Log

2016-10-24T14:31:14Z

Tobben:

{{RightTOC}}
[[Torbjorn CV]]. [https://ludvigsen3dprinting.com/blog RepRap Blog].

I want to give people production power. I have a Master's in engineering physics and love self-replication. It is my tool to create and distribute production power. I love it in ideas, in free software, in RepRaps, in workshops and in complete enterprises.

== October 24, 2016 ==
[[Open_Source_Filament_Extruders]]

== September 26, 2016 ==
: [https://se.linkedin.com/in/torbjorn-ludvigsen CV overhaul]

== September 23, 2016 ==
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#hangprinter_project_20 blog post] discussing Hangprinter homing

== September 21, 2016 ==
: Looking at [http://builders.reprap.org/2008/04/first-tests-of-haydon-linear-actuator.html Haydon linear actuator] as option for easily built RepRap design.
: Updated [[Servos]] with more sources.
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#VSE_1 blog post] presenting two-motor extruder concept and commenting on servos

== September 19, 2016 ==
: [[Servos]]

== September 14, 2016 ==
: Registered Ludvigsen 3d-printing and [http://www.appropedia.org/Clerck,_a_RepRap_3D_printer_hanging_from_the_ceiling the Hangprinter] for [https://www.facebook.com/events/1052788231502429/ 3d printing festival]
: Contacted [http://www.smykkekurs.no/ Smykkeskolen] about cooperation around starting FabLab in Larvik, arranging meeting...
: Continued [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 discussion about gcode modularity]

== September 13, 2016 ==
: Lively discussion about gcode modularity in [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 RepRap forum thread].
: Got in touch with creator of [http://dollo3d.com/ RepRap Dollo]
: Emailed thesis to Jo Prusa
: Yearly finiancial statements report for my limited company using [https://gnucash.org/ Gnucash] approved by Norwegian tax authorities

== September 8-10, 2016 ==
: Field visit to [http://fellesverkstedet.no/ Fellesverkstedet] FabLab, [http://sonen.ifi.uio.no/ Åpen Sone] hackerspace, [http://www.tekniskmuseum.no/besok-oss/nyheter/1012-makerspace-lanseres-i-norge Teknoteket] Makerspace and [https://bitraf.no/ Bitaf] Hackerspace in Oslo.
: [[Vbird]] is a good start at a scalable, cheap, good linear actuator design
: Attended when [https://www.youtube.com/watch?v=OKeNQYNJM1I Koka and Bernt Isak Wærstad gave a distributed musical experience at Birtraf]

== September 7, 2016 ==
: Installed GuixSD on laptop by following [https://www.gnu.org/software/guix/manual/html_node/System-Installation.html#System-Installation these steps]. Extra time spent due to GuixSD being in beta very noticeable.

== September 6, 2016 ==
: New blog post: http://vitana.se/opr3d/tbear/index.html#portable_gcode_1
: Discussion in [http://forums.reprap.org/read.php?1,705311 portable gcode thread]
: Continued discussion in [http://forums.reprap.org/read.php?14,607341,705398 forum thread about lead screw for RepRap X and Y axes]

== September 5, 2016 ==
: Poll RepRap forums for interest in modular gcode: http://forums.reprap.org/read.php?1,705311
: Found good method for establishing a reference operating system: Specify a Guix configuration file. Guix VM creation seems easier than earlier proposed Docker image solution for D3D-Porteus distribution. See https://archive.fosdem.org/2016/schedule/event/deployments_with_gnu_guix/

== June 16, 2016 ==
: Master's approved.
: Approved version of thesis: [[File:Thesis.pdf]]

== June 10, 2016 ==
: Defended Master's: [[File:Thesis_presentation_tobben.pdf]]

== June 7, 2016 ==
: Got a Chromebook into [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]] =)

== June 6, 2016 ==
: [[3D_Printer_Workshops]]
: Finished presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 5, 2016 ==
: Working on presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 2, 2016 ==
: A couple of new laptop models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== May 31, 2016 ==
: Found some RepRap structural virality data at http://maytheclonebewithyou.com/.
: Included it in new version of thesis: [[D3D_Thesis#PDF_uploads]]
: Data collection scripts and such here: [https://github.com/tobbelobb/clone-analysis-scripts]

== May 24, 2016 ==
: New version of thesis uploaded [[D3D_Thesis#PDF_uploads]]

== May 18, 2016 ==
: Needed some data on other RepRap assembly workshops' toolchains. Found 22 workshops, but most with limited info. Summarized here: [[File:Assembly workshops data collection through web search.ods]], published there: [[3D_Printer_Workshops_Analysis_of_Industry_Standards#Workshops_List]]

== May 13, 2016 ==
: Uploaded thesis work in progress draft and made a place to put it: [[D3D_Thesis#PDF_uploads]]
: Contacted [http://botbuilder.net/ botbuilder.net] asking for input on D3D-Porteus

== April 22, 2016 ==
: RepRap Wiki user MarcusWolschon has listed files needed to print RepRap assembly tools for workshops: [http://reprap.org/wiki/Development:Workshop_Tools]
: RepRap forums user xoan already made a Live ISO based on Debian with similar intentions as ours: [http://forums.reprap.org/read.php?1,474414,591715][http://meikian.eu/]

== April 18, 2016 ==
: One new model in [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== April 14, 2016 ==
: Sketched a Z-axis for the D3D Printer: [http://opensourceecology.org/wiki/File:Z_axis1.png]
: All code changes committed to [https://github.com/tobbelobb/D3D_Printer/tree/stripped repo].

== April 13, 2016 ==
: Master's writing is going fairly well. Some development on D3D printer this week: [[D3D_Printer_Design_Process#Concept_Creation_Incomplete_Frame]]
: Two commits to [https://github.com/tobbelobb/D3D_Printer/tree/stripped branch new branch called 'stripped' in D3D_Printer repo]

== April 10, 2016 ==
: [[D3D_Printer_Design_Process#Previous_Implementations]]

== Mar 29, 2016 ==
: Completing comments and some new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== Mar 26, 2016 ==
: Elaborated distributive enterprise part a bit: [[D3D_Value_Proposition#Main_Points]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Not_Booting_D3D_Porteus]]
: Documented payment model: [[D3D_Business_Plan#Tips_and_Tricks_for_Hosts]]
: First complete run with Quality Control Interface. See [[3D_Printer_Quality_Control_Interface]] and https://github.com/tobbelobb/D3D-Printrun.
: [[3D_Printer_Quality_Control_Interface#Videos_Showing_Expected_Behavior]]
: Updated Marlin to give prettier output for QCface. See https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin.
: Initiated repo for D3D-Porteus: https://github.com/tobbelobb/D3D-Porteus
: [[3D_Printer_Workshop_Survey#Torbjorn]]

== Mar 24, 2016 ==
: Invited users of Porteus to better map which/how laptop models work with Porteus: https://forum.porteus.org/viewtopic.php?f=61&t=5658

== Mar 21, 2016 ==
: [[3D_Printer_Quality_Control_Interface]] ready for first test usage. See https://github.com/tobbelobb/D3D-Printrun
: [[D3D_Thesis#Societal_Impact_of_Digital_Technology]]

== Mar 19, 2016 ==
: Published repo for D3D-Printrun: https://github.com/tobbelobb/D3D-Printrun

== Mar 18, 2016 ==
: Prepared [https://docs.google.com/forms/d/136AIOvtZ9ste7SKgrEkQlrcxanXyZDaiAwDbZ98fLQQ/viewform data collection form] for workshop participants.

== Mar 17, 2016 ==
: [[3D_Printer_Build_Plate#Polyethylenimine_.28PEI.29]]
: [[3D_Printer_Build_Plate#Polyisocyanurate_.28PIR.29_Foam]]
: Minor update to Slic3r settings in Porteus: [[File:D3D_Workshop_Configuration_64-bit_4.xzm]]

== Mar 16, 2016 ==
: Minor update to Marlin for D3D Porteus: [[File:Marlin in home.xzm]]. Transferred to Porteus USB at OSE.

== Mar 15, 2016 ==
: [[3D_Printer_Quality_Control_Interface]]

== Mar 11, 2016 ==
: [[Tobbens_Adding_Inductive_Proximity_Sensor_Log#Repeatability_at_Changing_Temperature]]
: [[Folgertech_Kit#Improvements]]
: [[Tobbens_Folgertech_Kit_Assembly_Log#Results]]

== Mar 10, 2016 ==
: On compensating curved print beds: [https://github.com/MarlinFirmware/Marlin/pull/1619]

== Mar 7, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log#Data]]
: [[Tobbens Adding Inductive Proximity Sensor Log#Implementation]]

== Mar 6, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log]]
: New model added to [[D3D Live ISO#Computer Models Verified to Boot]]

== Mar 5, 2016 ==
: [https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin D3D_Folgertech_Prusai3_Marlin repo]
: [[Tobbens Folgertech Kit Assembly Log]]
: Started a Python script for future automation of this pre-flight quality control, published [https://github.com/tobbelobb/RepRap_QC_scripts/blob/master/pre_flight_routine.py here]
: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v2.iso Porteus-D3D-Workshop-x86_64-v2.iso]

== Mar 4, 2016 ==
: [http://forums.reprap.org/read.php?14,607341,634998#msg-634998 Reports on speed limit] of cheapest and most easily built drive system of single threaded rod + stepper motor. Research suggesting anti-resonant drivers could be cheaper than aggressively threaded lead screws posted in [http://forums.reprap.org/read.php?14,607341,635107#msg-635107 forum thread].
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 3, 2016 ==
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 2, 2016 ==
: [[D3D Live ISO#Computer Models Verified to Boot]]
: Some activity on [http://forums.reprap.org/read.php?14,607341,634531#msg-634531 Lead Screw forum thread].

== Feb 28, 2016 ==
: Mapped OpenSCAD dependencies properly [http://opensourceecology.org/wiki/File:Openscad2.png Dependency map]
: Re-compiled OpenSCAD, uploaded new 64-bit iso: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v1.iso Porteus-D3D-Workshop-x86_64-v1.iso]. Updated [[D3D Live ISO#Instructions]] link.

== Feb 26, 2016 ==
: Been through [https://en.wikipedia.org/wiki/Dependency_hell Dependency hell] trying to compile CAD software to Porteus. OpenSCAD works now, FreeCAD doesn't.

== Feb 25, 2016 ==
: [[D3D Live ISO#On Creating xzm Packages]]

== Feb 24, 2016 ==
: Published 64-bit Porteus ISO. See [[D3D Live ISO#Instructions]] Still lacks configured Marlin source code.
: Tried to compile FreeCAD. [[D3D Live ISO#Compilation of FreeCAD]] Abandoned because of difficulties with compiling Coin3.
: Documented creation of 64-bit Arduino package: [[D3D Live ISO#Arduino]]

== Feb 23, 2016 ==
: Compiled gcc-5.3.0 package for 64-bit version of Porteus and documented the process: [[D3D Live ISO#Choice of Compiler Version]]
: Compiled OpenSCAD package for Porteus and documented the process: [[D3D Live ISO#CAD Software]]

== Feb 22, 2016 ==
: Got OpenSCAD 2015.03 to work on the 32-bit Live USB.
: Uploaded ~600 MiB iso file [http://vitana.se/opr3d/tbear/iso/Porteus_pronterface_slic3r_arduino_openscad_conf_i486.iso here].
: Minor changes to [[D3D Live ISO]]
: [[D3D Live ISO#Steps to boot Porteus on Macbook Air 2011]]

== Feb 21, 2016 ==
: Made repo with D3D Porteus Live USB OS [https://github.com/tobbelobb/D3D_Workshop_Configuration config files]
: Compiled GCC 5.3.0 for use in 32-bit version of Porteus: [http://vitana.se/opr3d/tbear/xzm/devel/gcc-5.3.0-i486.xzm xzm package link]

== Feb 19, 2016 ==
: [[D3D Thesis#Line of Reasoning]]
: [[D3D Thesis#Background]]
: [[3D Printer Build Plate]]
: Updated point 15 on [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 18, 2016 ==
: Got iso size down from 493 MiB (517 MB) to 299 MiB (313 MB). See [[D3D Live ISO#Stripping it down]] and updated download link in [[D3D Live ISO#Instructions]]
: Completed [[Tobbens Folgertech Kit Unboxing Log]] with some images and clarifying comments

== Feb 17, 2016 ==
: [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 16, 2016 ==
: Ordered four LJ12A3-4-Z/BX Inductive Proximity Sensor Switches.
: Ordered GT2 belts, pulleys and belt tensioning springs.
: Ordered signal switching 1N4148 diodes.
: [[Research On Inductive Proximity Sensors]]
: Updated [[File:Bed leveling and compensation comparison.ods]] with [https://www.youtube.com/watch?v=EcGFLwj0pnA Thomas Sanladerer's recommendation] and further comments on inductive sensing.
: Researched some brackets for induction sensor: [[Folgertech Kit#Candidates For Improvement Resolution]]

== Feb 15, 2016 ==
: New extensive Folgertech resource found: [[Folgertech Kit#Other Instructionals]].
: [[Gcode Modularity]]
: More work on [[D3D Live ISO]]. Got Slic3r working nicely, and integrated with Pronterface. Got Arduino IDE working. Latest version ISO: [http://vitana.se/opr3d/tbear/iso/Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso]
: [https://docs.google.com/presentation/d/1-kF_PPt1NU2PQZHaQFh712hjdcBuCc3dafmPdRSzNu0/edit?ts=56c23f04#slide=id.g1192b7f2d5_0_8 Prototype Planning]

== Feb 13, 2016 ==
: Further Porteus config. Now handling Pronterface better, updated iso to v1. See [[D3D Live ISO#ISO images]]

== Feb 11, 2016 ==
: [[D3D Live ISO]]
: Tested out [http://ProjectLibre.org/ Project Libre] with Andreas. [[File:D3D.pod]]

== Feb 9, 2016 ==
: Experiment with 3D printing assembly manual using only OpenSCAD renders as visuals: [http://Vitana.se/opr3d/tbear/index.html#Clerck_assembly_manual Clerck assembly manual]
: [[D3D Live ISO]]
: Helped by Andreas to create [[D3D Thesis Project Plan#Map of Deliverables]] to more easily manage myself and include others.

== Feb 5, 2016 ==
: Adjustments to [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 lead screw sourcing forum post] from yesterday.
: Ordered F6-12 thrust bearings for prototyping.

== Feb 4, 2016 ==
: Sourcing research on lead screws. Posted in [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 forum thread].
: Igus links in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]]
: Ordered following products for lead screw prototyping: [http://no.rs-online.com/web/p/products/8854956/], [http://no.rs-online.com/web/p/products/8854814/], [http://no.rs-online.com/web/p/products/8854830/], [http://no.rs-online.com/web/p/products/8854827/], [http://no.rs-online.com/web/p/products/8854987/]

== Feb 2, 2016 ==
: Initiated [[3D Printer Quality Control Research]]
: Initiated [[3D Printer Extruder Research]]
: Researched [[3D Printer Bed Leveling]]. See [[File:Bed leveling and compensation comparison.ods]] for full assessment matrix.

== Feb 1, 2016 ==
: Small change to [[Prusa i3 Build]].
: New research and complete rewrite of [[3D Printer Bed Leveling]].
: Small change to [[3D Printer Hot End Research]].
: Initiated [[3D Printer Print Surface Research]].

== Jan 30, 2016 ==
: [[D3D Workshop Roadmap]], [[D3D Workshop Slogans]], [https://docs.google.com/presentation/d/1duikQl9HMfHuUVAIQv4cDy1sGWZLujFzLxMRIGej5AY/edit?pref=2&pli=1#slide=id.p Folgertech 2020 Prusa i3 build working document], [https://www.facebook.com/OpenSourceEcology/photos/a.10151381815921562.574965.66469461561/10154554553731562/?type=3&theater Build Facebook post]

== Jan 29, 2016 ==
: Meeting with Jonathan and Marcin.
:* We should investigate bulk prices for key parts (like stepper motors)
:* I (Tobben) should collect some stories from the people I've given printers to. Stories of people who got empowered and made some money with their new RepRap knowledge and machines.
:* Thesis data collection nr 1 happens tomorrow when Folgertech Prusa i3 kit is assembled on the Factor e farm.

== Jan 23, 2016 ==
: [[3D Printer Bed Leveling]]
: [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.g10745b77da_3_3 Prusa i3 selection Google document]

== Jan 20, 2016 ==
: Created [http://forums.reprap.org/read.php?1,612676 forum thread] asking for input on workshop kits.

== Jan 19, 2016 ==
: CADded LM8UU standard linear bearings into D3D Printer (see repo).
: Meeting on kit selection [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.p Kit considerations]
: [[Prusa i3 Development]]
: [[3D Printer Kit for Workshop Research]]
: [[3D Printer Hot End Research]]

== Jan 17, 2016 ==
: [[D3D Thesis#Workshop Reproducibility]], some reserve plans created in [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project]

== Jan 13, 2016 ==
: Wrote [[D3D Thesis Project Plan]], sent to examiner.
: More insights on lead screws on the [http://forums.reprap.org/read.php?14,607341,607483 forum thread].
: Verification from [http://www.vermontrapidprototyping.com/3dprinters Vermont Rapid Prototyping] that lead screws used by Trinitylabs lasts for at least 2 years. Put in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]].

== Jan 12, 2016 ==
: [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project], embedded in [[D3D Thesis Project Plan]].
: Bought:
:* 3xForce Sensing Resistors (Interlink Electronics FSR 400) for prototyping
:* [https://ultimachine.com/content/rambo-13-complete-kit RAMBO v1.3 for prototyping]
: [[3D Printer Troubleshooting]]

== Jan 11, 2016 ==
: Wrote and published [[D3D Thesis#Team Charter]].
: [[D3D Enterprise Logic Model]]

== Jan 10, 2016 ==
: Some progress on the [http://forums.reprap.org/read.php?14,607341,607483 lead screw forum thread]. Emailed more skillful developers.
: Read up on possible choices for [[D3D Printer Electronics]]. Ordered smooth rods with linear bearings (sizes 8 mmm and 10 mm) for prototyping. Ordered powdered graphite for lubrication testing.

== Jan 9, 2016 ==
: Verification of lead screw: [https://YouTube.com/watch?v=gk9lhcTGSH4 working all-leadscrew 3D printer], [[Stepper Motor#Torque Tests]], [[D3D Printer Design Process#Verification Steps Taken for Lead Screw .2B Stepper Motor Concept]]
: Bought:
:* [http://eBay.com/itm/301833740948?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 1] and
:* [http://www.ebay.com/itm/262200758350?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 2] for some hands-on testing in February.
: Contacted [http://MooreInternational.co.uk Moore International] and [http://Danish3d.dk Danish 3D] for help with choice and supply of lead screws.
: Discovered [http://Contraptor.org Contraptor] that tries to use the concept of modular linear motion units, put into [[D3D Thesis#Earlier Work]].
: Read up on [[3D Printer Bed Leveling]].
: Summarized state of lead screw discussion in the RepRap community in a [http://forums.reprap.org/read.php?14,607341 forum thread asking for further insights]. Emailed various developers with lead screw designs, asking for experiences, thoughts, insights...
: [[3D Printer Filament Load Sensor]]

== Jan 8, 2016 ==
: Some work on the [[D3D Design Methodology]].
: Some usage of it logged in [[D3D Printer Design Process]].
: Meeting with Marcin, initiated [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path doc].

== Jan 7, 2016 ==
: Checked/commented on lifetimes: [[Stepper Motor#Lifetime]], [[FFF Extruder]], [[Lead Screw]]
: Structuring of 3D printer design work: [[D3D Printer Design Process]], [[D3D Design Methodology]].
: Structured wiki pages such that [[D3D Thesis]] is a sub-project of [[D3D Fusion]]. Changed [[D3D Fusion Project Plan]] to reflect this and initiated [[D3D Thesis Project Plan]].
: The thesis project aims to bootstrap the [[D3D Workshop Kit]].
: Explained structure in [[D3D Fusion#Naming and Links]]

== Jan 6, 2016 ==
: Meeting with Andreas S, [https://docs.google.com/spreadsheets/d/1-NuTg0c_uta0i3vNUZtciD3cq6j1bS4RKWCIG8AOaR0/edit#gid=0 Work Breakdown Structure], [https://docs.google.com/presentation/d/1CrmuvgX19dYkeBbUlYqTmXBTjc8wqiDNU7MEwVNuTsg/edit#slide=id.geb160911a_2_25 D3D Team Project Charter].
: Meeting with Marcin [https://docs.google.com/presentation/d/1jXC3V40cHqc2P8Oo-G2Z1G7IyytujYb4R3rIT9nZCpI/edit#slide=id.g8184a0e10_0_101 Long term Distributive Enterprise Milestones]
: Wrote something on [[D3D Fusion thesis#Funding Mechanisms for Open Source Work]]

== Jan 5, 2016 ==
: [[D3D Fusion Printer Conceptual Design]]

== Jan 4, 2016 ==
: Wrote some [https://Overleaf.com/read/vmpdtnzsgdgg Project Plan stuff on Overleaf]. 3h meeting with Marcin. Finished [https://docs.google.com/document/d/1sQKi3QuQ1yPu_08zyo1cLMhrQGytiTHL4Mfd7JMUK2M/edit?ts=568a0631 OSE NEGOTIATION INVITATION].

== Jan 3, 2016 ==
: Defined moving part of D3D Printer's linear actuator. Reorganized code and wrote README (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Jan 2, 2016 ==
: Added [[D3D Fusion printer design#Weight calculation for steel sheet frame]] and [[D3D Fusion printer design#Motor placement]] to wiki. Two minor commits in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 31, 2015 ==
: Re-organized [[D3D Requirements]]. Some progress on [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 30, 2015 ==
: Meeting with Marcin. Started [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 28, 2015 ==
: Reworked l_plate and basic frame (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 27, 2015 ==
: First rough visualization of D3D Fusion Printer done (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 26, 2015 ==
: Meeting with Marcin. Finished [[D3D Requirements]] together.

== Dec 25, 2015 ==
: Some progress in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 25, 2015 ==
: Made [https://github.com/tobbelobb/D3D_Printer Github repo] for D3D Printer OpenSCAD design.

== Dec 23, 2015 ==
: Wrote something on the D3D Printer design. [[D3D Fusion Printer Design]] Needs to be fitted into a template.

== Dec 22, 2015 ==
: Work on visa application process. Skype meeting with Marcin. Discussion points:
:# [[Torbjorn DEF Agreement]]. DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
:# Locking in design requirements - [[D3D Requirements]] - both overall and module by module
:# Defining the 'story' for the thesis. [[D3D Thesis Story]].
:# Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
: Found some data: [https://www.3dhubs.com/trends]
: Nice discussion on hangout, got some text produced from it: [https://docs.google.com/document/d/1Ber5iA-2V7m_3mbh54ZsuRB-viTLd-sfb9GL3jj58GQ/edit?ts=5679a219]
: Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: [[Cut_From_Freenode_RepRap_22_Dec]]

== Dec 21, 2015 ==
: Initiated Project Plan [[D3D Fusion project plan]]. This is what Martin must approve before we can move on. Made thesis skeleton [[D3D Fusion thesis#Thesis Skeleton]] from template in course documentation. Limited progress in FreeCAD.

== Dec 19, 2015 ==
: Commented proposed D3D requirements: [[Talk:D3D Requirements]]. Added Lyman extruder to [[Open Source Filament Extruders]]. ''See [[Power Tool Construction Set]].

== Dec 16, 2015 ==
: Presented some 3d printer design ideas in [[D3D Fusion printer design]].

== Dec 15, 2015 ==
: Summarized short research about prior work of Prusa: [[D3D Fusion thesis#Earlier Work]]

== Sun Dec 13, 2015 ==
: Wrote short [[D3D Fusion#Business norms and science norms]] comparison between DE norms and science norms.

== Thu Dec 10, 2015 ==
: Initiated [[D3D Fusion thesis]] sketch. Also did a little overview on [[Large Scale Fused Pellet Fabrication]]. Got an overview of the MOST lab's work. Put in in [[D3D Fusion thesis]].

== Sun Dec 6, 2015 ==
: Initiated this work log. Initiated [[D3D Fusion]]. Initiated D3D dev spreadsheed [https://docs.google.com/spreadsheets/d/1q4Smbyc0_MUNIIFQjmBc1-yq6sgeVxerCedJtWzahdo/edit#gid=1&vpid=A1]. Embedding [[D3D Fusion#Development spreadsheet| Done]]

[[Category:Logs]]

Open Source Filament Extruders

2016-10-24T14:30:39Z

Tobben: /* Open Source */

= Open Source =
*Lyman - [https://www.thingiverse.com/thing:380987][http://www.shapeways.com/blog/archives/1973-the-lyman-filament-extruder-may-drop-the-cost-of-desktop-3d-printing-forever.html] Creative Commons Attribution licence
*Precious Plastics Extrusion Machine [https://preciousplastic.com/en/videos/build/extrusion/] MIT licenced source files

=Not Open Source (CC-BY-NC)=

*Felfil - [http://felfil.com/felfil-filament-extruder-2/?lang=en#alt-whatis]
*Felfil Evo - [http://felfil.com/felfilevo-filament-extruder-2/?lang=en#]

Open Source Filament Extruders

2016-10-24T14:18:50Z

Tobben:

= Open Source =
*Lyman - [https://www.thingiverse.com/thing:380987] Creative Commons Attribution licence
*Precious Plastics Extrusion Machine [https://preciousplastic.com/en/videos/build/extrusion/] MIT licenced source files

=Not Open Source (CC-BY-NC)=

*Felfil - [http://felfil.com/felfil-filament-extruder-2/?lang=en#alt-whatis]
*Felfil Evo - [http://felfil.com/felfilevo-filament-extruder-2/?lang=en#]

File:TorbjornCV.pdf

2016-09-27T15:01:51Z

Tobben: Tobben uploaded a new version of File:TorbjornCV.pdf

Tobben Log

2016-09-26T13:46:39Z

Tobben:

{{RightTOC}}
[[Torbjorn CV]]. [https://ludvigsen3dprinting.com/blog RepRap Blog].

I want to give people production power. I have a Master's in engineering physics and love self-replication. It is my tool to create and distribute production power. I love it in ideas, in free software, in RepRaps, in workshops and in complete enterprises.

== September 26, 2016 ==
: [https://se.linkedin.com/in/torbjorn-ludvigsen CV overhaul]

== September 23, 2016 ==
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#hangprinter_project_20 blog post] discussing Hangprinter homing

== September 21, 2016 ==
: Looking at [http://builders.reprap.org/2008/04/first-tests-of-haydon-linear-actuator.html Haydon linear actuator] as option for easily built RepRap design.
: Updated [[Servos]] with more sources.
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#VSE_1 blog post] presenting two-motor extruder concept and commenting on servos

== September 19, 2016 ==
: [[Servos]]

== September 14, 2016 ==
: Registered Ludvigsen 3d-printing and [http://www.appropedia.org/Clerck,_a_RepRap_3D_printer_hanging_from_the_ceiling the Hangprinter] for [https://www.facebook.com/events/1052788231502429/ 3d printing festival]
: Contacted [http://www.smykkekurs.no/ Smykkeskolen] about cooperation around starting FabLab in Larvik, arranging meeting...
: Continued [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 discussion about gcode modularity]

== September 13, 2016 ==
: Lively discussion about gcode modularity in [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 RepRap forum thread].
: Got in touch with creator of [http://dollo3d.com/ RepRap Dollo]
: Emailed thesis to Jo Prusa
: Yearly finiancial statements report for my limited company using [https://gnucash.org/ Gnucash] approved by Norwegian tax authorities

== September 8-10, 2016 ==
: Field visit to [http://fellesverkstedet.no/ Fellesverkstedet] FabLab, [http://sonen.ifi.uio.no/ Åpen Sone] hackerspace, [http://www.tekniskmuseum.no/besok-oss/nyheter/1012-makerspace-lanseres-i-norge Teknoteket] Makerspace and [https://bitraf.no/ Bitaf] Hackerspace in Oslo.
: [[Vbird]] is a good start at a scalable, cheap, good linear actuator design
: Attended when [https://www.youtube.com/watch?v=OKeNQYNJM1I Koka and Bernt Isak Wærstad gave a distributed musical experience at Birtraf]

== September 7, 2016 ==
: Installed GuixSD on laptop by following [https://www.gnu.org/software/guix/manual/html_node/System-Installation.html#System-Installation these steps]. Extra time spent due to GuixSD being in beta very noticeable.

== September 6, 2016 ==
: New blog post: http://vitana.se/opr3d/tbear/index.html#portable_gcode_1
: Discussion in [http://forums.reprap.org/read.php?1,705311 portable gcode thread]
: Continued discussion in [http://forums.reprap.org/read.php?14,607341,705398 forum thread about lead screw for RepRap X and Y axes]

== September 5, 2016 ==
: Poll RepRap forums for interest in modular gcode: http://forums.reprap.org/read.php?1,705311
: Found good method for establishing a reference operating system: Specify a Guix configuration file. Guix VM creation seems easier than earlier proposed Docker image solution for D3D-Porteus distribution. See https://archive.fosdem.org/2016/schedule/event/deployments_with_gnu_guix/

== June 16, 2016 ==
: Master's approved.
: Approved version of thesis: [[File:Thesis.pdf]]

== June 10, 2016 ==
: Defended Master's: [[File:Thesis_presentation_tobben.pdf]]

== June 7, 2016 ==
: Got a Chromebook into [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]] =)

== June 6, 2016 ==
: [[3D_Printer_Workshops]]
: Finished presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 5, 2016 ==
: Working on presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 2, 2016 ==
: A couple of new laptop models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== May 31, 2016 ==
: Found some RepRap structural virality data at http://maytheclonebewithyou.com/.
: Included it in new version of thesis: [[D3D_Thesis#PDF_uploads]]
: Data collection scripts and such here: [https://github.com/tobbelobb/clone-analysis-scripts]

== May 24, 2016 ==
: New version of thesis uploaded [[D3D_Thesis#PDF_uploads]]

== May 18, 2016 ==
: Needed some data on other RepRap assembly workshops' toolchains. Found 22 workshops, but most with limited info. Summarized here: [[File:Assembly workshops data collection through web search.ods]], published there: [[3D_Printer_Workshops_Analysis_of_Industry_Standards#Workshops_List]]

== May 13, 2016 ==
: Uploaded thesis work in progress draft and made a place to put it: [[D3D_Thesis#PDF_uploads]]
: Contacted [http://botbuilder.net/ botbuilder.net] asking for input on D3D-Porteus

== April 22, 2016 ==
: RepRap Wiki user MarcusWolschon has listed files needed to print RepRap assembly tools for workshops: [http://reprap.org/wiki/Development:Workshop_Tools]
: RepRap forums user xoan already made a Live ISO based on Debian with similar intentions as ours: [http://forums.reprap.org/read.php?1,474414,591715][http://meikian.eu/]

== April 18, 2016 ==
: One new model in [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== April 14, 2016 ==
: Sketched a Z-axis for the D3D Printer: [http://opensourceecology.org/wiki/File:Z_axis1.png]
: All code changes committed to [https://github.com/tobbelobb/D3D_Printer/tree/stripped repo].

== April 13, 2016 ==
: Master's writing is going fairly well. Some development on D3D printer this week: [[D3D_Printer_Design_Process#Concept_Creation_Incomplete_Frame]]
: Two commits to [https://github.com/tobbelobb/D3D_Printer/tree/stripped branch new branch called 'stripped' in D3D_Printer repo]

== April 10, 2016 ==
: [[D3D_Printer_Design_Process#Previous_Implementations]]

== Mar 29, 2016 ==
: Completing comments and some new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== Mar 26, 2016 ==
: Elaborated distributive enterprise part a bit: [[D3D_Value_Proposition#Main_Points]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Not_Booting_D3D_Porteus]]
: Documented payment model: [[D3D_Business_Plan#Tips_and_Tricks_for_Hosts]]
: First complete run with Quality Control Interface. See [[3D_Printer_Quality_Control_Interface]] and https://github.com/tobbelobb/D3D-Printrun.
: [[3D_Printer_Quality_Control_Interface#Videos_Showing_Expected_Behavior]]
: Updated Marlin to give prettier output for QCface. See https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin.
: Initiated repo for D3D-Porteus: https://github.com/tobbelobb/D3D-Porteus
: [[3D_Printer_Workshop_Survey#Torbjorn]]

== Mar 24, 2016 ==
: Invited users of Porteus to better map which/how laptop models work with Porteus: https://forum.porteus.org/viewtopic.php?f=61&t=5658

== Mar 21, 2016 ==
: [[3D_Printer_Quality_Control_Interface]] ready for first test usage. See https://github.com/tobbelobb/D3D-Printrun
: [[D3D_Thesis#Societal_Impact_of_Digital_Technology]]

== Mar 19, 2016 ==
: Published repo for D3D-Printrun: https://github.com/tobbelobb/D3D-Printrun

== Mar 18, 2016 ==
: Prepared [https://docs.google.com/forms/d/136AIOvtZ9ste7SKgrEkQlrcxanXyZDaiAwDbZ98fLQQ/viewform data collection form] for workshop participants.

== Mar 17, 2016 ==
: [[3D_Printer_Build_Plate#Polyethylenimine_.28PEI.29]]
: [[3D_Printer_Build_Plate#Polyisocyanurate_.28PIR.29_Foam]]
: Minor update to Slic3r settings in Porteus: [[File:D3D_Workshop_Configuration_64-bit_4.xzm]]

== Mar 16, 2016 ==
: Minor update to Marlin for D3D Porteus: [[File:Marlin in home.xzm]]. Transferred to Porteus USB at OSE.

== Mar 15, 2016 ==
: [[3D_Printer_Quality_Control_Interface]]

== Mar 11, 2016 ==
: [[Tobbens_Adding_Inductive_Proximity_Sensor_Log#Repeatability_at_Changing_Temperature]]
: [[Folgertech_Kit#Improvements]]
: [[Tobbens_Folgertech_Kit_Assembly_Log#Results]]

== Mar 10, 2016 ==
: On compensating curved print beds: [https://github.com/MarlinFirmware/Marlin/pull/1619]

== Mar 7, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log#Data]]
: [[Tobbens Adding Inductive Proximity Sensor Log#Implementation]]

== Mar 6, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log]]
: New model added to [[D3D Live ISO#Computer Models Verified to Boot]]

== Mar 5, 2016 ==
: [https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin D3D_Folgertech_Prusai3_Marlin repo]
: [[Tobbens Folgertech Kit Assembly Log]]
: Started a Python script for future automation of this pre-flight quality control, published [https://github.com/tobbelobb/RepRap_QC_scripts/blob/master/pre_flight_routine.py here]
: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v2.iso Porteus-D3D-Workshop-x86_64-v2.iso]

== Mar 4, 2016 ==
: [http://forums.reprap.org/read.php?14,607341,634998#msg-634998 Reports on speed limit] of cheapest and most easily built drive system of single threaded rod + stepper motor. Research suggesting anti-resonant drivers could be cheaper than aggressively threaded lead screws posted in [http://forums.reprap.org/read.php?14,607341,635107#msg-635107 forum thread].
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 3, 2016 ==
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 2, 2016 ==
: [[D3D Live ISO#Computer Models Verified to Boot]]
: Some activity on [http://forums.reprap.org/read.php?14,607341,634531#msg-634531 Lead Screw forum thread].

== Feb 28, 2016 ==
: Mapped OpenSCAD dependencies properly [http://opensourceecology.org/wiki/File:Openscad2.png Dependency map]
: Re-compiled OpenSCAD, uploaded new 64-bit iso: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v1.iso Porteus-D3D-Workshop-x86_64-v1.iso]. Updated [[D3D Live ISO#Instructions]] link.

== Feb 26, 2016 ==
: Been through [https://en.wikipedia.org/wiki/Dependency_hell Dependency hell] trying to compile CAD software to Porteus. OpenSCAD works now, FreeCAD doesn't.

== Feb 25, 2016 ==
: [[D3D Live ISO#On Creating xzm Packages]]

== Feb 24, 2016 ==
: Published 64-bit Porteus ISO. See [[D3D Live ISO#Instructions]] Still lacks configured Marlin source code.
: Tried to compile FreeCAD. [[D3D Live ISO#Compilation of FreeCAD]] Abandoned because of difficulties with compiling Coin3.
: Documented creation of 64-bit Arduino package: [[D3D Live ISO#Arduino]]

== Feb 23, 2016 ==
: Compiled gcc-5.3.0 package for 64-bit version of Porteus and documented the process: [[D3D Live ISO#Choice of Compiler Version]]
: Compiled OpenSCAD package for Porteus and documented the process: [[D3D Live ISO#CAD Software]]

== Feb 22, 2016 ==
: Got OpenSCAD 2015.03 to work on the 32-bit Live USB.
: Uploaded ~600 MiB iso file [http://vitana.se/opr3d/tbear/iso/Porteus_pronterface_slic3r_arduino_openscad_conf_i486.iso here].
: Minor changes to [[D3D Live ISO]]
: [[D3D Live ISO#Steps to boot Porteus on Macbook Air 2011]]

== Feb 21, 2016 ==
: Made repo with D3D Porteus Live USB OS [https://github.com/tobbelobb/D3D_Workshop_Configuration config files]
: Compiled GCC 5.3.0 for use in 32-bit version of Porteus: [http://vitana.se/opr3d/tbear/xzm/devel/gcc-5.3.0-i486.xzm xzm package link]

== Feb 19, 2016 ==
: [[D3D Thesis#Line of Reasoning]]
: [[D3D Thesis#Background]]
: [[3D Printer Build Plate]]
: Updated point 15 on [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 18, 2016 ==
: Got iso size down from 493 MiB (517 MB) to 299 MiB (313 MB). See [[D3D Live ISO#Stripping it down]] and updated download link in [[D3D Live ISO#Instructions]]
: Completed [[Tobbens Folgertech Kit Unboxing Log]] with some images and clarifying comments

== Feb 17, 2016 ==
: [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 16, 2016 ==
: Ordered four LJ12A3-4-Z/BX Inductive Proximity Sensor Switches.
: Ordered GT2 belts, pulleys and belt tensioning springs.
: Ordered signal switching 1N4148 diodes.
: [[Research On Inductive Proximity Sensors]]
: Updated [[File:Bed leveling and compensation comparison.ods]] with [https://www.youtube.com/watch?v=EcGFLwj0pnA Thomas Sanladerer's recommendation] and further comments on inductive sensing.
: Researched some brackets for induction sensor: [[Folgertech Kit#Candidates For Improvement Resolution]]

== Feb 15, 2016 ==
: New extensive Folgertech resource found: [[Folgertech Kit#Other Instructionals]].
: [[Gcode Modularity]]
: More work on [[D3D Live ISO]]. Got Slic3r working nicely, and integrated with Pronterface. Got Arduino IDE working. Latest version ISO: [http://vitana.se/opr3d/tbear/iso/Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso]
: [https://docs.google.com/presentation/d/1-kF_PPt1NU2PQZHaQFh712hjdcBuCc3dafmPdRSzNu0/edit?ts=56c23f04#slide=id.g1192b7f2d5_0_8 Prototype Planning]

== Feb 13, 2016 ==
: Further Porteus config. Now handling Pronterface better, updated iso to v1. See [[D3D Live ISO#ISO images]]

== Feb 11, 2016 ==
: [[D3D Live ISO]]
: Tested out [http://ProjectLibre.org/ Project Libre] with Andreas. [[File:D3D.pod]]

== Feb 9, 2016 ==
: Experiment with 3D printing assembly manual using only OpenSCAD renders as visuals: [http://Vitana.se/opr3d/tbear/index.html#Clerck_assembly_manual Clerck assembly manual]
: [[D3D Live ISO]]
: Helped by Andreas to create [[D3D Thesis Project Plan#Map of Deliverables]] to more easily manage myself and include others.

== Feb 5, 2016 ==
: Adjustments to [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 lead screw sourcing forum post] from yesterday.
: Ordered F6-12 thrust bearings for prototyping.

== Feb 4, 2016 ==
: Sourcing research on lead screws. Posted in [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 forum thread].
: Igus links in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]]
: Ordered following products for lead screw prototyping: [http://no.rs-online.com/web/p/products/8854956/], [http://no.rs-online.com/web/p/products/8854814/], [http://no.rs-online.com/web/p/products/8854830/], [http://no.rs-online.com/web/p/products/8854827/], [http://no.rs-online.com/web/p/products/8854987/]

== Feb 2, 2016 ==
: Initiated [[3D Printer Quality Control Research]]
: Initiated [[3D Printer Extruder Research]]
: Researched [[3D Printer Bed Leveling]]. See [[File:Bed leveling and compensation comparison.ods]] for full assessment matrix.

== Feb 1, 2016 ==
: Small change to [[Prusa i3 Build]].
: New research and complete rewrite of [[3D Printer Bed Leveling]].
: Small change to [[3D Printer Hot End Research]].
: Initiated [[3D Printer Print Surface Research]].

== Jan 30, 2016 ==
: [[D3D Workshop Roadmap]], [[D3D Workshop Slogans]], [https://docs.google.com/presentation/d/1duikQl9HMfHuUVAIQv4cDy1sGWZLujFzLxMRIGej5AY/edit?pref=2&pli=1#slide=id.p Folgertech 2020 Prusa i3 build working document], [https://www.facebook.com/OpenSourceEcology/photos/a.10151381815921562.574965.66469461561/10154554553731562/?type=3&theater Build Facebook post]

== Jan 29, 2016 ==
: Meeting with Jonathan and Marcin.
:* We should investigate bulk prices for key parts (like stepper motors)
:* I (Tobben) should collect some stories from the people I've given printers to. Stories of people who got empowered and made some money with their new RepRap knowledge and machines.
:* Thesis data collection nr 1 happens tomorrow when Folgertech Prusa i3 kit is assembled on the Factor e farm.

== Jan 23, 2016 ==
: [[3D Printer Bed Leveling]]
: [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.g10745b77da_3_3 Prusa i3 selection Google document]

== Jan 20, 2016 ==
: Created [http://forums.reprap.org/read.php?1,612676 forum thread] asking for input on workshop kits.

== Jan 19, 2016 ==
: CADded LM8UU standard linear bearings into D3D Printer (see repo).
: Meeting on kit selection [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.p Kit considerations]
: [[Prusa i3 Development]]
: [[3D Printer Kit for Workshop Research]]
: [[3D Printer Hot End Research]]

== Jan 17, 2016 ==
: [[D3D Thesis#Workshop Reproducibility]], some reserve plans created in [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project]

== Jan 13, 2016 ==
: Wrote [[D3D Thesis Project Plan]], sent to examiner.
: More insights on lead screws on the [http://forums.reprap.org/read.php?14,607341,607483 forum thread].
: Verification from [http://www.vermontrapidprototyping.com/3dprinters Vermont Rapid Prototyping] that lead screws used by Trinitylabs lasts for at least 2 years. Put in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]].

== Jan 12, 2016 ==
: [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project], embedded in [[D3D Thesis Project Plan]].
: Bought:
:* 3xForce Sensing Resistors (Interlink Electronics FSR 400) for prototyping
:* [https://ultimachine.com/content/rambo-13-complete-kit RAMBO v1.3 for prototyping]
: [[3D Printer Troubleshooting]]

== Jan 11, 2016 ==
: Wrote and published [[D3D Thesis#Team Charter]].
: [[D3D Enterprise Logic Model]]

== Jan 10, 2016 ==
: Some progress on the [http://forums.reprap.org/read.php?14,607341,607483 lead screw forum thread]. Emailed more skillful developers.
: Read up on possible choices for [[D3D Printer Electronics]]. Ordered smooth rods with linear bearings (sizes 8 mmm and 10 mm) for prototyping. Ordered powdered graphite for lubrication testing.

== Jan 9, 2016 ==
: Verification of lead screw: [https://YouTube.com/watch?v=gk9lhcTGSH4 working all-leadscrew 3D printer], [[Stepper Motor#Torque Tests]], [[D3D Printer Design Process#Verification Steps Taken for Lead Screw .2B Stepper Motor Concept]]
: Bought:
:* [http://eBay.com/itm/301833740948?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 1] and
:* [http://www.ebay.com/itm/262200758350?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 2] for some hands-on testing in February.
: Contacted [http://MooreInternational.co.uk Moore International] and [http://Danish3d.dk Danish 3D] for help with choice and supply of lead screws.
: Discovered [http://Contraptor.org Contraptor] that tries to use the concept of modular linear motion units, put into [[D3D Thesis#Earlier Work]].
: Read up on [[3D Printer Bed Leveling]].
: Summarized state of lead screw discussion in the RepRap community in a [http://forums.reprap.org/read.php?14,607341 forum thread asking for further insights]. Emailed various developers with lead screw designs, asking for experiences, thoughts, insights...
: [[3D Printer Filament Load Sensor]]

== Jan 8, 2016 ==
: Some work on the [[D3D Design Methodology]].
: Some usage of it logged in [[D3D Printer Design Process]].
: Meeting with Marcin, initiated [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path doc].

== Jan 7, 2016 ==
: Checked/commented on lifetimes: [[Stepper Motor#Lifetime]], [[FFF Extruder]], [[Lead Screw]]
: Structuring of 3D printer design work: [[D3D Printer Design Process]], [[D3D Design Methodology]].
: Structured wiki pages such that [[D3D Thesis]] is a sub-project of [[D3D Fusion]]. Changed [[D3D Fusion Project Plan]] to reflect this and initiated [[D3D Thesis Project Plan]].
: The thesis project aims to bootstrap the [[D3D Workshop Kit]].
: Explained structure in [[D3D Fusion#Naming and Links]]

== Jan 6, 2016 ==
: Meeting with Andreas S, [https://docs.google.com/spreadsheets/d/1-NuTg0c_uta0i3vNUZtciD3cq6j1bS4RKWCIG8AOaR0/edit#gid=0 Work Breakdown Structure], [https://docs.google.com/presentation/d/1CrmuvgX19dYkeBbUlYqTmXBTjc8wqiDNU7MEwVNuTsg/edit#slide=id.geb160911a_2_25 D3D Team Project Charter].
: Meeting with Marcin [https://docs.google.com/presentation/d/1jXC3V40cHqc2P8Oo-G2Z1G7IyytujYb4R3rIT9nZCpI/edit#slide=id.g8184a0e10_0_101 Long term Distributive Enterprise Milestones]
: Wrote something on [[D3D Fusion thesis#Funding Mechanisms for Open Source Work]]

== Jan 5, 2016 ==
: [[D3D Fusion Printer Conceptual Design]]

== Jan 4, 2016 ==
: Wrote some [https://Overleaf.com/read/vmpdtnzsgdgg Project Plan stuff on Overleaf]. 3h meeting with Marcin. Finished [https://docs.google.com/document/d/1sQKi3QuQ1yPu_08zyo1cLMhrQGytiTHL4Mfd7JMUK2M/edit?ts=568a0631 OSE NEGOTIATION INVITATION].

== Jan 3, 2016 ==
: Defined moving part of D3D Printer's linear actuator. Reorganized code and wrote README (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Jan 2, 2016 ==
: Added [[D3D Fusion printer design#Weight calculation for steel sheet frame]] and [[D3D Fusion printer design#Motor placement]] to wiki. Two minor commits in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 31, 2015 ==
: Re-organized [[D3D Requirements]]. Some progress on [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 30, 2015 ==
: Meeting with Marcin. Started [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 28, 2015 ==
: Reworked l_plate and basic frame (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 27, 2015 ==
: First rough visualization of D3D Fusion Printer done (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 26, 2015 ==
: Meeting with Marcin. Finished [[D3D Requirements]] together.

== Dec 25, 2015 ==
: Some progress in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 25, 2015 ==
: Made [https://github.com/tobbelobb/D3D_Printer Github repo] for D3D Printer OpenSCAD design.

== Dec 23, 2015 ==
: Wrote something on the D3D Printer design. [[D3D Fusion Printer Design]] Needs to be fitted into a template.

== Dec 22, 2015 ==
: Work on visa application process. Skype meeting with Marcin. Discussion points:
:# [[Torbjorn DEF Agreement]]. DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
:# Locking in design requirements - [[D3D Requirements]] - both overall and module by module
:# Defining the 'story' for the thesis. [[D3D Thesis Story]].
:# Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
: Found some data: [https://www.3dhubs.com/trends]
: Nice discussion on hangout, got some text produced from it: [https://docs.google.com/document/d/1Ber5iA-2V7m_3mbh54ZsuRB-viTLd-sfb9GL3jj58GQ/edit?ts=5679a219]
: Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: [[Cut_From_Freenode_RepRap_22_Dec]]

== Dec 21, 2015 ==
: Initiated Project Plan [[D3D Fusion project plan]]. This is what Martin must approve before we can move on. Made thesis skeleton [[D3D Fusion thesis#Thesis Skeleton]] from template in course documentation. Limited progress in FreeCAD.

== Dec 19, 2015 ==
: Commented proposed D3D requirements: [[Talk:D3D Requirements]]. Added Lyman extruder to [[Open Source Filament Extruders]]. ''See [[Power Tool Construction Set]].

== Dec 16, 2015 ==
: Presented some 3d printer design ideas in [[D3D Fusion printer design]].

== Dec 15, 2015 ==
: Summarized short research about prior work of Prusa: [[D3D Fusion thesis#Earlier Work]]

== Sun Dec 13, 2015 ==
: Wrote short [[D3D Fusion#Business norms and science norms]] comparison between DE norms and science norms.

== Thu Dec 10, 2015 ==
: Initiated [[D3D Fusion thesis]] sketch. Also did a little overview on [[Large Scale Fused Pellet Fabrication]]. Got an overview of the MOST lab's work. Put in in [[D3D Fusion thesis]].

== Sun Dec 6, 2015 ==
: Initiated this work log. Initiated [[D3D Fusion]]. Initiated D3D dev spreadsheed [https://docs.google.com/spreadsheets/d/1q4Smbyc0_MUNIIFQjmBc1-yq6sgeVxerCedJtWzahdo/edit#gid=1&vpid=A1]. Embedding [[D3D Fusion#Development spreadsheet| Done]]

[[Category:Logs]]

Tobben Log

2016-09-26T09:38:04Z

Tobben:

{{RightTOC}}
[[Torbjorn CV]]. [https://ludvigsen3dprinting.com/blog RepRap Blog].

I want to give people production power. I have a Master's in engineering physics and love self-replication. It is my tool to create and distribute production power. I love it in ideas, in free software, in RepRaps, in workshops and in complete enterprises.

== September 23, 2016 ==
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#hangprinter_project_20 blog post] discussing Hangprinter homing

== September 21, 2016 ==
: Looking at [http://builders.reprap.org/2008/04/first-tests-of-haydon-linear-actuator.html Haydon linear actuator] as option for easily built RepRap design.
: Updated [[Servos]] with more sources.
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#VSE_1 blog post] presenting two-motor extruder concept and commenting on servos

== September 19, 2016 ==
: [[Servos]]

== September 14, 2016 ==
: Registered Ludvigsen 3d-printing and [http://www.appropedia.org/Clerck,_a_RepRap_3D_printer_hanging_from_the_ceiling the Hangprinter] for [https://www.facebook.com/events/1052788231502429/ 3d printing festival]
: Contacted [http://www.smykkekurs.no/ Smykkeskolen] about cooperation around starting FabLab in Larvik, arranging meeting...
: Continued [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 discussion about gcode modularity]

== September 13, 2016 ==
: Lively discussion about gcode modularity in [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 RepRap forum thread].
: Got in touch with creator of [http://dollo3d.com/ RepRap Dollo]
: Emailed thesis to Jo Prusa
: Yearly finiancial statements report for my limited company using [https://gnucash.org/ Gnucash] approved by Norwegian tax authorities

== September 8-10, 2016 ==
: Field visit to [http://fellesverkstedet.no/ Fellesverkstedet] FabLab, [http://sonen.ifi.uio.no/ Åpen Sone] hackerspace, [http://www.tekniskmuseum.no/besok-oss/nyheter/1012-makerspace-lanseres-i-norge Teknoteket] Makerspace and [https://bitraf.no/ Bitaf] Hackerspace in Oslo.
: [[Vbird]] is a good start at a scalable, cheap, good linear actuator design
: Attended when [https://www.youtube.com/watch?v=OKeNQYNJM1I Koka and Bernt Isak Wærstad gave a distributed musical experience at Birtraf]

== September 7, 2016 ==
: Installed GuixSD on laptop by following [https://www.gnu.org/software/guix/manual/html_node/System-Installation.html#System-Installation these steps]. Extra time spent due to GuixSD being in beta very noticeable.

== September 6, 2016 ==
: New blog post: http://vitana.se/opr3d/tbear/index.html#portable_gcode_1
: Discussion in [http://forums.reprap.org/read.php?1,705311 portable gcode thread]
: Continued discussion in [http://forums.reprap.org/read.php?14,607341,705398 forum thread about lead screw for RepRap X and Y axes]

== September 5, 2016 ==
: Poll RepRap forums for interest in modular gcode: http://forums.reprap.org/read.php?1,705311
: Found good method for establishing a reference operating system: Specify a Guix configuration file. Guix VM creation seems easier than earlier proposed Docker image solution for D3D-Porteus distribution. See https://archive.fosdem.org/2016/schedule/event/deployments_with_gnu_guix/

== June 16, 2016 ==
: Master's approved.
: Approved version of thesis: [[File:Thesis.pdf]]

== June 10, 2016 ==
: Defended Master's: [[File:Thesis_presentation_tobben.pdf]]

== June 7, 2016 ==
: Got a Chromebook into [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]] =)

== June 6, 2016 ==
: [[3D_Printer_Workshops]]
: Finished presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 5, 2016 ==
: Working on presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 2, 2016 ==
: A couple of new laptop models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== May 31, 2016 ==
: Found some RepRap structural virality data at http://maytheclonebewithyou.com/.
: Included it in new version of thesis: [[D3D_Thesis#PDF_uploads]]
: Data collection scripts and such here: [https://github.com/tobbelobb/clone-analysis-scripts]

== May 24, 2016 ==
: New version of thesis uploaded [[D3D_Thesis#PDF_uploads]]

== May 18, 2016 ==
: Needed some data on other RepRap assembly workshops' toolchains. Found 22 workshops, but most with limited info. Summarized here: [[File:Assembly workshops data collection through web search.ods]], published there: [[3D_Printer_Workshops_Analysis_of_Industry_Standards#Workshops_List]]

== May 13, 2016 ==
: Uploaded thesis work in progress draft and made a place to put it: [[D3D_Thesis#PDF_uploads]]
: Contacted [http://botbuilder.net/ botbuilder.net] asking for input on D3D-Porteus

== April 22, 2016 ==
: RepRap Wiki user MarcusWolschon has listed files needed to print RepRap assembly tools for workshops: [http://reprap.org/wiki/Development:Workshop_Tools]
: RepRap forums user xoan already made a Live ISO based on Debian with similar intentions as ours: [http://forums.reprap.org/read.php?1,474414,591715][http://meikian.eu/]

== April 18, 2016 ==
: One new model in [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== April 14, 2016 ==
: Sketched a Z-axis for the D3D Printer: [http://opensourceecology.org/wiki/File:Z_axis1.png]
: All code changes committed to [https://github.com/tobbelobb/D3D_Printer/tree/stripped repo].

== April 13, 2016 ==
: Master's writing is going fairly well. Some development on D3D printer this week: [[D3D_Printer_Design_Process#Concept_Creation_Incomplete_Frame]]
: Two commits to [https://github.com/tobbelobb/D3D_Printer/tree/stripped branch new branch called 'stripped' in D3D_Printer repo]

== April 10, 2016 ==
: [[D3D_Printer_Design_Process#Previous_Implementations]]

== Mar 29, 2016 ==
: Completing comments and some new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== Mar 26, 2016 ==
: Elaborated distributive enterprise part a bit: [[D3D_Value_Proposition#Main_Points]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Not_Booting_D3D_Porteus]]
: Documented payment model: [[D3D_Business_Plan#Tips_and_Tricks_for_Hosts]]
: First complete run with Quality Control Interface. See [[3D_Printer_Quality_Control_Interface]] and https://github.com/tobbelobb/D3D-Printrun.
: [[3D_Printer_Quality_Control_Interface#Videos_Showing_Expected_Behavior]]
: Updated Marlin to give prettier output for QCface. See https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin.
: Initiated repo for D3D-Porteus: https://github.com/tobbelobb/D3D-Porteus
: [[3D_Printer_Workshop_Survey#Torbjorn]]

== Mar 24, 2016 ==
: Invited users of Porteus to better map which/how laptop models work with Porteus: https://forum.porteus.org/viewtopic.php?f=61&t=5658

== Mar 21, 2016 ==
: [[3D_Printer_Quality_Control_Interface]] ready for first test usage. See https://github.com/tobbelobb/D3D-Printrun
: [[D3D_Thesis#Societal_Impact_of_Digital_Technology]]

== Mar 19, 2016 ==
: Published repo for D3D-Printrun: https://github.com/tobbelobb/D3D-Printrun

== Mar 18, 2016 ==
: Prepared [https://docs.google.com/forms/d/136AIOvtZ9ste7SKgrEkQlrcxanXyZDaiAwDbZ98fLQQ/viewform data collection form] for workshop participants.

== Mar 17, 2016 ==
: [[3D_Printer_Build_Plate#Polyethylenimine_.28PEI.29]]
: [[3D_Printer_Build_Plate#Polyisocyanurate_.28PIR.29_Foam]]
: Minor update to Slic3r settings in Porteus: [[File:D3D_Workshop_Configuration_64-bit_4.xzm]]

== Mar 16, 2016 ==
: Minor update to Marlin for D3D Porteus: [[File:Marlin in home.xzm]]. Transferred to Porteus USB at OSE.

== Mar 15, 2016 ==
: [[3D_Printer_Quality_Control_Interface]]

== Mar 11, 2016 ==
: [[Tobbens_Adding_Inductive_Proximity_Sensor_Log#Repeatability_at_Changing_Temperature]]
: [[Folgertech_Kit#Improvements]]
: [[Tobbens_Folgertech_Kit_Assembly_Log#Results]]

== Mar 10, 2016 ==
: On compensating curved print beds: [https://github.com/MarlinFirmware/Marlin/pull/1619]

== Mar 7, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log#Data]]
: [[Tobbens Adding Inductive Proximity Sensor Log#Implementation]]

== Mar 6, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log]]
: New model added to [[D3D Live ISO#Computer Models Verified to Boot]]

== Mar 5, 2016 ==
: [https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin D3D_Folgertech_Prusai3_Marlin repo]
: [[Tobbens Folgertech Kit Assembly Log]]
: Started a Python script for future automation of this pre-flight quality control, published [https://github.com/tobbelobb/RepRap_QC_scripts/blob/master/pre_flight_routine.py here]
: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v2.iso Porteus-D3D-Workshop-x86_64-v2.iso]

== Mar 4, 2016 ==
: [http://forums.reprap.org/read.php?14,607341,634998#msg-634998 Reports on speed limit] of cheapest and most easily built drive system of single threaded rod + stepper motor. Research suggesting anti-resonant drivers could be cheaper than aggressively threaded lead screws posted in [http://forums.reprap.org/read.php?14,607341,635107#msg-635107 forum thread].
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 3, 2016 ==
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 2, 2016 ==
: [[D3D Live ISO#Computer Models Verified to Boot]]
: Some activity on [http://forums.reprap.org/read.php?14,607341,634531#msg-634531 Lead Screw forum thread].

== Feb 28, 2016 ==
: Mapped OpenSCAD dependencies properly [http://opensourceecology.org/wiki/File:Openscad2.png Dependency map]
: Re-compiled OpenSCAD, uploaded new 64-bit iso: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v1.iso Porteus-D3D-Workshop-x86_64-v1.iso]. Updated [[D3D Live ISO#Instructions]] link.

== Feb 26, 2016 ==
: Been through [https://en.wikipedia.org/wiki/Dependency_hell Dependency hell] trying to compile CAD software to Porteus. OpenSCAD works now, FreeCAD doesn't.

== Feb 25, 2016 ==
: [[D3D Live ISO#On Creating xzm Packages]]

== Feb 24, 2016 ==
: Published 64-bit Porteus ISO. See [[D3D Live ISO#Instructions]] Still lacks configured Marlin source code.
: Tried to compile FreeCAD. [[D3D Live ISO#Compilation of FreeCAD]] Abandoned because of difficulties with compiling Coin3.
: Documented creation of 64-bit Arduino package: [[D3D Live ISO#Arduino]]

== Feb 23, 2016 ==
: Compiled gcc-5.3.0 package for 64-bit version of Porteus and documented the process: [[D3D Live ISO#Choice of Compiler Version]]
: Compiled OpenSCAD package for Porteus and documented the process: [[D3D Live ISO#CAD Software]]

== Feb 22, 2016 ==
: Got OpenSCAD 2015.03 to work on the 32-bit Live USB.
: Uploaded ~600 MiB iso file [http://vitana.se/opr3d/tbear/iso/Porteus_pronterface_slic3r_arduino_openscad_conf_i486.iso here].
: Minor changes to [[D3D Live ISO]]
: [[D3D Live ISO#Steps to boot Porteus on Macbook Air 2011]]

== Feb 21, 2016 ==
: Made repo with D3D Porteus Live USB OS [https://github.com/tobbelobb/D3D_Workshop_Configuration config files]
: Compiled GCC 5.3.0 for use in 32-bit version of Porteus: [http://vitana.se/opr3d/tbear/xzm/devel/gcc-5.3.0-i486.xzm xzm package link]

== Feb 19, 2016 ==
: [[D3D Thesis#Line of Reasoning]]
: [[D3D Thesis#Background]]
: [[3D Printer Build Plate]]
: Updated point 15 on [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 18, 2016 ==
: Got iso size down from 493 MiB (517 MB) to 299 MiB (313 MB). See [[D3D Live ISO#Stripping it down]] and updated download link in [[D3D Live ISO#Instructions]]
: Completed [[Tobbens Folgertech Kit Unboxing Log]] with some images and clarifying comments

== Feb 17, 2016 ==
: [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 16, 2016 ==
: Ordered four LJ12A3-4-Z/BX Inductive Proximity Sensor Switches.
: Ordered GT2 belts, pulleys and belt tensioning springs.
: Ordered signal switching 1N4148 diodes.
: [[Research On Inductive Proximity Sensors]]
: Updated [[File:Bed leveling and compensation comparison.ods]] with [https://www.youtube.com/watch?v=EcGFLwj0pnA Thomas Sanladerer's recommendation] and further comments on inductive sensing.
: Researched some brackets for induction sensor: [[Folgertech Kit#Candidates For Improvement Resolution]]

== Feb 15, 2016 ==
: New extensive Folgertech resource found: [[Folgertech Kit#Other Instructionals]].
: [[Gcode Modularity]]
: More work on [[D3D Live ISO]]. Got Slic3r working nicely, and integrated with Pronterface. Got Arduino IDE working. Latest version ISO: [http://vitana.se/opr3d/tbear/iso/Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso]
: [https://docs.google.com/presentation/d/1-kF_PPt1NU2PQZHaQFh712hjdcBuCc3dafmPdRSzNu0/edit?ts=56c23f04#slide=id.g1192b7f2d5_0_8 Prototype Planning]

== Feb 13, 2016 ==
: Further Porteus config. Now handling Pronterface better, updated iso to v1. See [[D3D Live ISO#ISO images]]

== Feb 11, 2016 ==
: [[D3D Live ISO]]
: Tested out [http://ProjectLibre.org/ Project Libre] with Andreas. [[File:D3D.pod]]

== Feb 9, 2016 ==
: Experiment with 3D printing assembly manual using only OpenSCAD renders as visuals: [http://Vitana.se/opr3d/tbear/index.html#Clerck_assembly_manual Clerck assembly manual]
: [[D3D Live ISO]]
: Helped by Andreas to create [[D3D Thesis Project Plan#Map of Deliverables]] to more easily manage myself and include others.

== Feb 5, 2016 ==
: Adjustments to [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 lead screw sourcing forum post] from yesterday.
: Ordered F6-12 thrust bearings for prototyping.

== Feb 4, 2016 ==
: Sourcing research on lead screws. Posted in [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 forum thread].
: Igus links in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]]
: Ordered following products for lead screw prototyping: [http://no.rs-online.com/web/p/products/8854956/], [http://no.rs-online.com/web/p/products/8854814/], [http://no.rs-online.com/web/p/products/8854830/], [http://no.rs-online.com/web/p/products/8854827/], [http://no.rs-online.com/web/p/products/8854987/]

== Feb 2, 2016 ==
: Initiated [[3D Printer Quality Control Research]]
: Initiated [[3D Printer Extruder Research]]
: Researched [[3D Printer Bed Leveling]]. See [[File:Bed leveling and compensation comparison.ods]] for full assessment matrix.

== Feb 1, 2016 ==
: Small change to [[Prusa i3 Build]].
: New research and complete rewrite of [[3D Printer Bed Leveling]].
: Small change to [[3D Printer Hot End Research]].
: Initiated [[3D Printer Print Surface Research]].

== Jan 30, 2016 ==
: [[D3D Workshop Roadmap]], [[D3D Workshop Slogans]], [https://docs.google.com/presentation/d/1duikQl9HMfHuUVAIQv4cDy1sGWZLujFzLxMRIGej5AY/edit?pref=2&pli=1#slide=id.p Folgertech 2020 Prusa i3 build working document], [https://www.facebook.com/OpenSourceEcology/photos/a.10151381815921562.574965.66469461561/10154554553731562/?type=3&theater Build Facebook post]

== Jan 29, 2016 ==
: Meeting with Jonathan and Marcin.
:* We should investigate bulk prices for key parts (like stepper motors)
:* I (Tobben) should collect some stories from the people I've given printers to. Stories of people who got empowered and made some money with their new RepRap knowledge and machines.
:* Thesis data collection nr 1 happens tomorrow when Folgertech Prusa i3 kit is assembled on the Factor e farm.

== Jan 23, 2016 ==
: [[3D Printer Bed Leveling]]
: [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.g10745b77da_3_3 Prusa i3 selection Google document]

== Jan 20, 2016 ==
: Created [http://forums.reprap.org/read.php?1,612676 forum thread] asking for input on workshop kits.

== Jan 19, 2016 ==
: CADded LM8UU standard linear bearings into D3D Printer (see repo).
: Meeting on kit selection [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.p Kit considerations]
: [[Prusa i3 Development]]
: [[3D Printer Kit for Workshop Research]]
: [[3D Printer Hot End Research]]

== Jan 17, 2016 ==
: [[D3D Thesis#Workshop Reproducibility]], some reserve plans created in [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project]

== Jan 13, 2016 ==
: Wrote [[D3D Thesis Project Plan]], sent to examiner.
: More insights on lead screws on the [http://forums.reprap.org/read.php?14,607341,607483 forum thread].
: Verification from [http://www.vermontrapidprototyping.com/3dprinters Vermont Rapid Prototyping] that lead screws used by Trinitylabs lasts for at least 2 years. Put in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]].

== Jan 12, 2016 ==
: [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project], embedded in [[D3D Thesis Project Plan]].
: Bought:
:* 3xForce Sensing Resistors (Interlink Electronics FSR 400) for prototyping
:* [https://ultimachine.com/content/rambo-13-complete-kit RAMBO v1.3 for prototyping]
: [[3D Printer Troubleshooting]]

== Jan 11, 2016 ==
: Wrote and published [[D3D Thesis#Team Charter]].
: [[D3D Enterprise Logic Model]]

== Jan 10, 2016 ==
: Some progress on the [http://forums.reprap.org/read.php?14,607341,607483 lead screw forum thread]. Emailed more skillful developers.
: Read up on possible choices for [[D3D Printer Electronics]]. Ordered smooth rods with linear bearings (sizes 8 mmm and 10 mm) for prototyping. Ordered powdered graphite for lubrication testing.

== Jan 9, 2016 ==
: Verification of lead screw: [https://YouTube.com/watch?v=gk9lhcTGSH4 working all-leadscrew 3D printer], [[Stepper Motor#Torque Tests]], [[D3D Printer Design Process#Verification Steps Taken for Lead Screw .2B Stepper Motor Concept]]
: Bought:
:* [http://eBay.com/itm/301833740948?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 1] and
:* [http://www.ebay.com/itm/262200758350?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 2] for some hands-on testing in February.
: Contacted [http://MooreInternational.co.uk Moore International] and [http://Danish3d.dk Danish 3D] for help with choice and supply of lead screws.
: Discovered [http://Contraptor.org Contraptor] that tries to use the concept of modular linear motion units, put into [[D3D Thesis#Earlier Work]].
: Read up on [[3D Printer Bed Leveling]].
: Summarized state of lead screw discussion in the RepRap community in a [http://forums.reprap.org/read.php?14,607341 forum thread asking for further insights]. Emailed various developers with lead screw designs, asking for experiences, thoughts, insights...
: [[3D Printer Filament Load Sensor]]

== Jan 8, 2016 ==
: Some work on the [[D3D Design Methodology]].
: Some usage of it logged in [[D3D Printer Design Process]].
: Meeting with Marcin, initiated [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path doc].

== Jan 7, 2016 ==
: Checked/commented on lifetimes: [[Stepper Motor#Lifetime]], [[FFF Extruder]], [[Lead Screw]]
: Structuring of 3D printer design work: [[D3D Printer Design Process]], [[D3D Design Methodology]].
: Structured wiki pages such that [[D3D Thesis]] is a sub-project of [[D3D Fusion]]. Changed [[D3D Fusion Project Plan]] to reflect this and initiated [[D3D Thesis Project Plan]].
: The thesis project aims to bootstrap the [[D3D Workshop Kit]].
: Explained structure in [[D3D Fusion#Naming and Links]]

== Jan 6, 2016 ==
: Meeting with Andreas S, [https://docs.google.com/spreadsheets/d/1-NuTg0c_uta0i3vNUZtciD3cq6j1bS4RKWCIG8AOaR0/edit#gid=0 Work Breakdown Structure], [https://docs.google.com/presentation/d/1CrmuvgX19dYkeBbUlYqTmXBTjc8wqiDNU7MEwVNuTsg/edit#slide=id.geb160911a_2_25 D3D Team Project Charter].
: Meeting with Marcin [https://docs.google.com/presentation/d/1jXC3V40cHqc2P8Oo-G2Z1G7IyytujYb4R3rIT9nZCpI/edit#slide=id.g8184a0e10_0_101 Long term Distributive Enterprise Milestones]
: Wrote something on [[D3D Fusion thesis#Funding Mechanisms for Open Source Work]]

== Jan 5, 2016 ==
: [[D3D Fusion Printer Conceptual Design]]

== Jan 4, 2016 ==
: Wrote some [https://Overleaf.com/read/vmpdtnzsgdgg Project Plan stuff on Overleaf]. 3h meeting with Marcin. Finished [https://docs.google.com/document/d/1sQKi3QuQ1yPu_08zyo1cLMhrQGytiTHL4Mfd7JMUK2M/edit?ts=568a0631 OSE NEGOTIATION INVITATION].

== Jan 3, 2016 ==
: Defined moving part of D3D Printer's linear actuator. Reorganized code and wrote README (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Jan 2, 2016 ==
: Added [[D3D Fusion printer design#Weight calculation for steel sheet frame]] and [[D3D Fusion printer design#Motor placement]] to wiki. Two minor commits in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 31, 2015 ==
: Re-organized [[D3D Requirements]]. Some progress on [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 30, 2015 ==
: Meeting with Marcin. Started [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 28, 2015 ==
: Reworked l_plate and basic frame (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 27, 2015 ==
: First rough visualization of D3D Fusion Printer done (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 26, 2015 ==
: Meeting with Marcin. Finished [[D3D Requirements]] together.

== Dec 25, 2015 ==
: Some progress in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 25, 2015 ==
: Made [https://github.com/tobbelobb/D3D_Printer Github repo] for D3D Printer OpenSCAD design.

== Dec 23, 2015 ==
: Wrote something on the D3D Printer design. [[D3D Fusion Printer Design]] Needs to be fitted into a template.

== Dec 22, 2015 ==
: Work on visa application process. Skype meeting with Marcin. Discussion points:
:# [[Torbjorn DEF Agreement]]. DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
:# Locking in design requirements - [[D3D Requirements]] - both overall and module by module
:# Defining the 'story' for the thesis. [[D3D Thesis Story]].
:# Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
: Found some data: [https://www.3dhubs.com/trends]
: Nice discussion on hangout, got some text produced from it: [https://docs.google.com/document/d/1Ber5iA-2V7m_3mbh54ZsuRB-viTLd-sfb9GL3jj58GQ/edit?ts=5679a219]
: Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: [[Cut_From_Freenode_RepRap_22_Dec]]

== Dec 21, 2015 ==
: Initiated Project Plan [[D3D Fusion project plan]]. This is what Martin must approve before we can move on. Made thesis skeleton [[D3D Fusion thesis#Thesis Skeleton]] from template in course documentation. Limited progress in FreeCAD.

== Dec 19, 2015 ==
: Commented proposed D3D requirements: [[Talk:D3D Requirements]]. Added Lyman extruder to [[Open Source Filament Extruders]]. ''See [[Power Tool Construction Set]].

== Dec 16, 2015 ==
: Presented some 3d printer design ideas in [[D3D Fusion printer design]].

== Dec 15, 2015 ==
: Summarized short research about prior work of Prusa: [[D3D Fusion thesis#Earlier Work]]

== Sun Dec 13, 2015 ==
: Wrote short [[D3D Fusion#Business norms and science norms]] comparison between DE norms and science norms.

== Thu Dec 10, 2015 ==
: Initiated [[D3D Fusion thesis]] sketch. Also did a little overview on [[Large Scale Fused Pellet Fabrication]]. Got an overview of the MOST lab's work. Put in in [[D3D Fusion thesis]].

== Sun Dec 6, 2015 ==
: Initiated this work log. Initiated [[D3D Fusion]]. Initiated D3D dev spreadsheed [https://docs.google.com/spreadsheets/d/1q4Smbyc0_MUNIIFQjmBc1-yq6sgeVxerCedJtWzahdo/edit#gid=1&vpid=A1]. Embedding [[D3D Fusion#Development spreadsheet| Done]]

[[Category:Logs]]

Tobben Log

2016-09-21T15:32:24Z

Tobben:

{{RightTOC}}
[[Torbjorn CV]]. [https://ludvigsen3dprinting.com/blog RepRap Blog].

I want to give people production power. I have a Master's in engineering physics and love self-replication. It is my tool to create and distribute production power. I love it in ideas, in free software, in RepRaps, in workshops and in complete enterprises.

== September 21, 2016 ==
: Looking at [http://builders.reprap.org/2008/04/first-tests-of-haydon-linear-actuator.html Haydon linear actuator] as option for easily built RepRap design.
: Updated [[Servos]] with more sources.
: Wrote [https://ludvigsen3dprinting.com/blog/index.html#VSE_1 blog post] presenting two-motor extruder concept and commenting on servos

== September 19, 2016 ==
: [[Servos]]

== September 14, 2016 ==
: Registered Ludvigsen 3d-printing and [http://www.appropedia.org/Clerck,_a_RepRap_3D_printer_hanging_from_the_ceiling the Hangprinter] for [https://www.facebook.com/events/1052788231502429/ 3d printing festival]
: Contacted [http://www.smykkekurs.no/ Smykkeskolen] about cooperation around starting FabLab in Larvik, arranging meeting...
: Continued [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 discussion about gcode modularity]

== September 13, 2016 ==
: Lively discussion about gcode modularity in [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 RepRap forum thread].
: Got in touch with creator of [http://dollo3d.com/ RepRap Dollo]
: Emailed thesis to Jo Prusa
: Yearly finiancial statements report for my limited company using [https://gnucash.org/ Gnucash] approved by Norwegian tax authorities

== September 8-10, 2016 ==
: Field visit to [http://fellesverkstedet.no/ Fellesverkstedet] FabLab, [http://sonen.ifi.uio.no/ Åpen Sone] hackerspace, [http://www.tekniskmuseum.no/besok-oss/nyheter/1012-makerspace-lanseres-i-norge Teknoteket] Makerspace and [https://bitraf.no/ Bitaf] Hackerspace in Oslo.
: [[Vbird]] is a good start at a scalable, cheap, good linear actuator design
: Attended when [https://www.youtube.com/watch?v=OKeNQYNJM1I Koka and Bernt Isak Wærstad gave a distributed musical experience at Birtraf]

== September 7, 2016 ==
: Installed GuixSD on laptop by following [https://www.gnu.org/software/guix/manual/html_node/System-Installation.html#System-Installation these steps]. Extra time spent due to GuixSD being in beta very noticeable.

== September 6, 2016 ==
: New blog post: http://vitana.se/opr3d/tbear/index.html#portable_gcode_1
: Discussion in [http://forums.reprap.org/read.php?1,705311 portable gcode thread]
: Continued discussion in [http://forums.reprap.org/read.php?14,607341,705398 forum thread about lead screw for RepRap X and Y axes]

== September 5, 2016 ==
: Poll RepRap forums for interest in modular gcode: http://forums.reprap.org/read.php?1,705311
: Found good method for establishing a reference operating system: Specify a Guix configuration file. Guix VM creation seems easier than earlier proposed Docker image solution for D3D-Porteus distribution. See https://archive.fosdem.org/2016/schedule/event/deployments_with_gnu_guix/

== June 16, 2016 ==
: Master's approved.
: Approved version of thesis: [[File:Thesis.pdf]]

== June 10, 2016 ==
: Defended Master's: [[File:Thesis_presentation_tobben.pdf]]

== June 7, 2016 ==
: Got a Chromebook into [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]] =)

== June 6, 2016 ==
: [[3D_Printer_Workshops]]
: Finished presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 5, 2016 ==
: Working on presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 2, 2016 ==
: A couple of new laptop models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== May 31, 2016 ==
: Found some RepRap structural virality data at http://maytheclonebewithyou.com/.
: Included it in new version of thesis: [[D3D_Thesis#PDF_uploads]]
: Data collection scripts and such here: [https://github.com/tobbelobb/clone-analysis-scripts]

== May 24, 2016 ==
: New version of thesis uploaded [[D3D_Thesis#PDF_uploads]]

== May 18, 2016 ==
: Needed some data on other RepRap assembly workshops' toolchains. Found 22 workshops, but most with limited info. Summarized here: [[File:Assembly workshops data collection through web search.ods]], published there: [[3D_Printer_Workshops_Analysis_of_Industry_Standards#Workshops_List]]

== May 13, 2016 ==
: Uploaded thesis work in progress draft and made a place to put it: [[D3D_Thesis#PDF_uploads]]
: Contacted [http://botbuilder.net/ botbuilder.net] asking for input on D3D-Porteus

== April 22, 2016 ==
: RepRap Wiki user MarcusWolschon has listed files needed to print RepRap assembly tools for workshops: [http://reprap.org/wiki/Development:Workshop_Tools]
: RepRap forums user xoan already made a Live ISO based on Debian with similar intentions as ours: [http://forums.reprap.org/read.php?1,474414,591715][http://meikian.eu/]

== April 18, 2016 ==
: One new model in [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== April 14, 2016 ==
: Sketched a Z-axis for the D3D Printer: [http://opensourceecology.org/wiki/File:Z_axis1.png]
: All code changes committed to [https://github.com/tobbelobb/D3D_Printer/tree/stripped repo].

== April 13, 2016 ==
: Master's writing is going fairly well. Some development on D3D printer this week: [[D3D_Printer_Design_Process#Concept_Creation_Incomplete_Frame]]
: Two commits to [https://github.com/tobbelobb/D3D_Printer/tree/stripped branch new branch called 'stripped' in D3D_Printer repo]

== April 10, 2016 ==
: [[D3D_Printer_Design_Process#Previous_Implementations]]

== Mar 29, 2016 ==
: Completing comments and some new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== Mar 26, 2016 ==
: Elaborated distributive enterprise part a bit: [[D3D_Value_Proposition#Main_Points]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Not_Booting_D3D_Porteus]]
: Documented payment model: [[D3D_Business_Plan#Tips_and_Tricks_for_Hosts]]
: First complete run with Quality Control Interface. See [[3D_Printer_Quality_Control_Interface]] and https://github.com/tobbelobb/D3D-Printrun.
: [[3D_Printer_Quality_Control_Interface#Videos_Showing_Expected_Behavior]]
: Updated Marlin to give prettier output for QCface. See https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin.
: Initiated repo for D3D-Porteus: https://github.com/tobbelobb/D3D-Porteus
: [[3D_Printer_Workshop_Survey#Torbjorn]]

== Mar 24, 2016 ==
: Invited users of Porteus to better map which/how laptop models work with Porteus: https://forum.porteus.org/viewtopic.php?f=61&t=5658

== Mar 21, 2016 ==
: [[3D_Printer_Quality_Control_Interface]] ready for first test usage. See https://github.com/tobbelobb/D3D-Printrun
: [[D3D_Thesis#Societal_Impact_of_Digital_Technology]]

== Mar 19, 2016 ==
: Published repo for D3D-Printrun: https://github.com/tobbelobb/D3D-Printrun

== Mar 18, 2016 ==
: Prepared [https://docs.google.com/forms/d/136AIOvtZ9ste7SKgrEkQlrcxanXyZDaiAwDbZ98fLQQ/viewform data collection form] for workshop participants.

== Mar 17, 2016 ==
: [[3D_Printer_Build_Plate#Polyethylenimine_.28PEI.29]]
: [[3D_Printer_Build_Plate#Polyisocyanurate_.28PIR.29_Foam]]
: Minor update to Slic3r settings in Porteus: [[File:D3D_Workshop_Configuration_64-bit_4.xzm]]

== Mar 16, 2016 ==
: Minor update to Marlin for D3D Porteus: [[File:Marlin in home.xzm]]. Transferred to Porteus USB at OSE.

== Mar 15, 2016 ==
: [[3D_Printer_Quality_Control_Interface]]

== Mar 11, 2016 ==
: [[Tobbens_Adding_Inductive_Proximity_Sensor_Log#Repeatability_at_Changing_Temperature]]
: [[Folgertech_Kit#Improvements]]
: [[Tobbens_Folgertech_Kit_Assembly_Log#Results]]

== Mar 10, 2016 ==
: On compensating curved print beds: [https://github.com/MarlinFirmware/Marlin/pull/1619]

== Mar 7, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log#Data]]
: [[Tobbens Adding Inductive Proximity Sensor Log#Implementation]]

== Mar 6, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log]]
: New model added to [[D3D Live ISO#Computer Models Verified to Boot]]

== Mar 5, 2016 ==
: [https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin D3D_Folgertech_Prusai3_Marlin repo]
: [[Tobbens Folgertech Kit Assembly Log]]
: Started a Python script for future automation of this pre-flight quality control, published [https://github.com/tobbelobb/RepRap_QC_scripts/blob/master/pre_flight_routine.py here]
: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v2.iso Porteus-D3D-Workshop-x86_64-v2.iso]

== Mar 4, 2016 ==
: [http://forums.reprap.org/read.php?14,607341,634998#msg-634998 Reports on speed limit] of cheapest and most easily built drive system of single threaded rod + stepper motor. Research suggesting anti-resonant drivers could be cheaper than aggressively threaded lead screws posted in [http://forums.reprap.org/read.php?14,607341,635107#msg-635107 forum thread].
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 3, 2016 ==
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 2, 2016 ==
: [[D3D Live ISO#Computer Models Verified to Boot]]
: Some activity on [http://forums.reprap.org/read.php?14,607341,634531#msg-634531 Lead Screw forum thread].

== Feb 28, 2016 ==
: Mapped OpenSCAD dependencies properly [http://opensourceecology.org/wiki/File:Openscad2.png Dependency map]
: Re-compiled OpenSCAD, uploaded new 64-bit iso: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v1.iso Porteus-D3D-Workshop-x86_64-v1.iso]. Updated [[D3D Live ISO#Instructions]] link.

== Feb 26, 2016 ==
: Been through [https://en.wikipedia.org/wiki/Dependency_hell Dependency hell] trying to compile CAD software to Porteus. OpenSCAD works now, FreeCAD doesn't.

== Feb 25, 2016 ==
: [[D3D Live ISO#On Creating xzm Packages]]

== Feb 24, 2016 ==
: Published 64-bit Porteus ISO. See [[D3D Live ISO#Instructions]] Still lacks configured Marlin source code.
: Tried to compile FreeCAD. [[D3D Live ISO#Compilation of FreeCAD]] Abandoned because of difficulties with compiling Coin3.
: Documented creation of 64-bit Arduino package: [[D3D Live ISO#Arduino]]

== Feb 23, 2016 ==
: Compiled gcc-5.3.0 package for 64-bit version of Porteus and documented the process: [[D3D Live ISO#Choice of Compiler Version]]
: Compiled OpenSCAD package for Porteus and documented the process: [[D3D Live ISO#CAD Software]]

== Feb 22, 2016 ==
: Got OpenSCAD 2015.03 to work on the 32-bit Live USB.
: Uploaded ~600 MiB iso file [http://vitana.se/opr3d/tbear/iso/Porteus_pronterface_slic3r_arduino_openscad_conf_i486.iso here].
: Minor changes to [[D3D Live ISO]]
: [[D3D Live ISO#Steps to boot Porteus on Macbook Air 2011]]

== Feb 21, 2016 ==
: Made repo with D3D Porteus Live USB OS [https://github.com/tobbelobb/D3D_Workshop_Configuration config files]
: Compiled GCC 5.3.0 for use in 32-bit version of Porteus: [http://vitana.se/opr3d/tbear/xzm/devel/gcc-5.3.0-i486.xzm xzm package link]

== Feb 19, 2016 ==
: [[D3D Thesis#Line of Reasoning]]
: [[D3D Thesis#Background]]
: [[3D Printer Build Plate]]
: Updated point 15 on [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 18, 2016 ==
: Got iso size down from 493 MiB (517 MB) to 299 MiB (313 MB). See [[D3D Live ISO#Stripping it down]] and updated download link in [[D3D Live ISO#Instructions]]
: Completed [[Tobbens Folgertech Kit Unboxing Log]] with some images and clarifying comments

== Feb 17, 2016 ==
: [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 16, 2016 ==
: Ordered four LJ12A3-4-Z/BX Inductive Proximity Sensor Switches.
: Ordered GT2 belts, pulleys and belt tensioning springs.
: Ordered signal switching 1N4148 diodes.
: [[Research On Inductive Proximity Sensors]]
: Updated [[File:Bed leveling and compensation comparison.ods]] with [https://www.youtube.com/watch?v=EcGFLwj0pnA Thomas Sanladerer's recommendation] and further comments on inductive sensing.
: Researched some brackets for induction sensor: [[Folgertech Kit#Candidates For Improvement Resolution]]

== Feb 15, 2016 ==
: New extensive Folgertech resource found: [[Folgertech Kit#Other Instructionals]].
: [[Gcode Modularity]]
: More work on [[D3D Live ISO]]. Got Slic3r working nicely, and integrated with Pronterface. Got Arduino IDE working. Latest version ISO: [http://vitana.se/opr3d/tbear/iso/Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso]
: [https://docs.google.com/presentation/d/1-kF_PPt1NU2PQZHaQFh712hjdcBuCc3dafmPdRSzNu0/edit?ts=56c23f04#slide=id.g1192b7f2d5_0_8 Prototype Planning]

== Feb 13, 2016 ==
: Further Porteus config. Now handling Pronterface better, updated iso to v1. See [[D3D Live ISO#ISO images]]

== Feb 11, 2016 ==
: [[D3D Live ISO]]
: Tested out [http://ProjectLibre.org/ Project Libre] with Andreas. [[File:D3D.pod]]

== Feb 9, 2016 ==
: Experiment with 3D printing assembly manual using only OpenSCAD renders as visuals: [http://Vitana.se/opr3d/tbear/index.html#Clerck_assembly_manual Clerck assembly manual]
: [[D3D Live ISO]]
: Helped by Andreas to create [[D3D Thesis Project Plan#Map of Deliverables]] to more easily manage myself and include others.

== Feb 5, 2016 ==
: Adjustments to [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 lead screw sourcing forum post] from yesterday.
: Ordered F6-12 thrust bearings for prototyping.

== Feb 4, 2016 ==
: Sourcing research on lead screws. Posted in [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 forum thread].
: Igus links in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]]
: Ordered following products for lead screw prototyping: [http://no.rs-online.com/web/p/products/8854956/], [http://no.rs-online.com/web/p/products/8854814/], [http://no.rs-online.com/web/p/products/8854830/], [http://no.rs-online.com/web/p/products/8854827/], [http://no.rs-online.com/web/p/products/8854987/]

== Feb 2, 2016 ==
: Initiated [[3D Printer Quality Control Research]]
: Initiated [[3D Printer Extruder Research]]
: Researched [[3D Printer Bed Leveling]]. See [[File:Bed leveling and compensation comparison.ods]] for full assessment matrix.

== Feb 1, 2016 ==
: Small change to [[Prusa i3 Build]].
: New research and complete rewrite of [[3D Printer Bed Leveling]].
: Small change to [[3D Printer Hot End Research]].
: Initiated [[3D Printer Print Surface Research]].

== Jan 30, 2016 ==
: [[D3D Workshop Roadmap]], [[D3D Workshop Slogans]], [https://docs.google.com/presentation/d/1duikQl9HMfHuUVAIQv4cDy1sGWZLujFzLxMRIGej5AY/edit?pref=2&pli=1#slide=id.p Folgertech 2020 Prusa i3 build working document], [https://www.facebook.com/OpenSourceEcology/photos/a.10151381815921562.574965.66469461561/10154554553731562/?type=3&theater Build Facebook post]

== Jan 29, 2016 ==
: Meeting with Jonathan and Marcin.
:* We should investigate bulk prices for key parts (like stepper motors)
:* I (Tobben) should collect some stories from the people I've given printers to. Stories of people who got empowered and made some money with their new RepRap knowledge and machines.
:* Thesis data collection nr 1 happens tomorrow when Folgertech Prusa i3 kit is assembled on the Factor e farm.

== Jan 23, 2016 ==
: [[3D Printer Bed Leveling]]
: [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.g10745b77da_3_3 Prusa i3 selection Google document]

== Jan 20, 2016 ==
: Created [http://forums.reprap.org/read.php?1,612676 forum thread] asking for input on workshop kits.

== Jan 19, 2016 ==
: CADded LM8UU standard linear bearings into D3D Printer (see repo).
: Meeting on kit selection [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.p Kit considerations]
: [[Prusa i3 Development]]
: [[3D Printer Kit for Workshop Research]]
: [[3D Printer Hot End Research]]

== Jan 17, 2016 ==
: [[D3D Thesis#Workshop Reproducibility]], some reserve plans created in [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project]

== Jan 13, 2016 ==
: Wrote [[D3D Thesis Project Plan]], sent to examiner.
: More insights on lead screws on the [http://forums.reprap.org/read.php?14,607341,607483 forum thread].
: Verification from [http://www.vermontrapidprototyping.com/3dprinters Vermont Rapid Prototyping] that lead screws used by Trinitylabs lasts for at least 2 years. Put in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]].

== Jan 12, 2016 ==
: [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project], embedded in [[D3D Thesis Project Plan]].
: Bought:
:* 3xForce Sensing Resistors (Interlink Electronics FSR 400) for prototyping
:* [https://ultimachine.com/content/rambo-13-complete-kit RAMBO v1.3 for prototyping]
: [[3D Printer Troubleshooting]]

== Jan 11, 2016 ==
: Wrote and published [[D3D Thesis#Team Charter]].
: [[D3D Enterprise Logic Model]]

== Jan 10, 2016 ==
: Some progress on the [http://forums.reprap.org/read.php?14,607341,607483 lead screw forum thread]. Emailed more skillful developers.
: Read up on possible choices for [[D3D Printer Electronics]]. Ordered smooth rods with linear bearings (sizes 8 mmm and 10 mm) for prototyping. Ordered powdered graphite for lubrication testing.

== Jan 9, 2016 ==
: Verification of lead screw: [https://YouTube.com/watch?v=gk9lhcTGSH4 working all-leadscrew 3D printer], [[Stepper Motor#Torque Tests]], [[D3D Printer Design Process#Verification Steps Taken for Lead Screw .2B Stepper Motor Concept]]
: Bought:
:* [http://eBay.com/itm/301833740948?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 1] and
:* [http://www.ebay.com/itm/262200758350?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 2] for some hands-on testing in February.
: Contacted [http://MooreInternational.co.uk Moore International] and [http://Danish3d.dk Danish 3D] for help with choice and supply of lead screws.
: Discovered [http://Contraptor.org Contraptor] that tries to use the concept of modular linear motion units, put into [[D3D Thesis#Earlier Work]].
: Read up on [[3D Printer Bed Leveling]].
: Summarized state of lead screw discussion in the RepRap community in a [http://forums.reprap.org/read.php?14,607341 forum thread asking for further insights]. Emailed various developers with lead screw designs, asking for experiences, thoughts, insights...
: [[3D Printer Filament Load Sensor]]

== Jan 8, 2016 ==
: Some work on the [[D3D Design Methodology]].
: Some usage of it logged in [[D3D Printer Design Process]].
: Meeting with Marcin, initiated [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path doc].

== Jan 7, 2016 ==
: Checked/commented on lifetimes: [[Stepper Motor#Lifetime]], [[FFF Extruder]], [[Lead Screw]]
: Structuring of 3D printer design work: [[D3D Printer Design Process]], [[D3D Design Methodology]].
: Structured wiki pages such that [[D3D Thesis]] is a sub-project of [[D3D Fusion]]. Changed [[D3D Fusion Project Plan]] to reflect this and initiated [[D3D Thesis Project Plan]].
: The thesis project aims to bootstrap the [[D3D Workshop Kit]].
: Explained structure in [[D3D Fusion#Naming and Links]]

== Jan 6, 2016 ==
: Meeting with Andreas S, [https://docs.google.com/spreadsheets/d/1-NuTg0c_uta0i3vNUZtciD3cq6j1bS4RKWCIG8AOaR0/edit#gid=0 Work Breakdown Structure], [https://docs.google.com/presentation/d/1CrmuvgX19dYkeBbUlYqTmXBTjc8wqiDNU7MEwVNuTsg/edit#slide=id.geb160911a_2_25 D3D Team Project Charter].
: Meeting with Marcin [https://docs.google.com/presentation/d/1jXC3V40cHqc2P8Oo-G2Z1G7IyytujYb4R3rIT9nZCpI/edit#slide=id.g8184a0e10_0_101 Long term Distributive Enterprise Milestones]
: Wrote something on [[D3D Fusion thesis#Funding Mechanisms for Open Source Work]]

== Jan 5, 2016 ==
: [[D3D Fusion Printer Conceptual Design]]

== Jan 4, 2016 ==
: Wrote some [https://Overleaf.com/read/vmpdtnzsgdgg Project Plan stuff on Overleaf]. 3h meeting with Marcin. Finished [https://docs.google.com/document/d/1sQKi3QuQ1yPu_08zyo1cLMhrQGytiTHL4Mfd7JMUK2M/edit?ts=568a0631 OSE NEGOTIATION INVITATION].

== Jan 3, 2016 ==
: Defined moving part of D3D Printer's linear actuator. Reorganized code and wrote README (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Jan 2, 2016 ==
: Added [[D3D Fusion printer design#Weight calculation for steel sheet frame]] and [[D3D Fusion printer design#Motor placement]] to wiki. Two minor commits in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 31, 2015 ==
: Re-organized [[D3D Requirements]]. Some progress on [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 30, 2015 ==
: Meeting with Marcin. Started [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 28, 2015 ==
: Reworked l_plate and basic frame (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 27, 2015 ==
: First rough visualization of D3D Fusion Printer done (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 26, 2015 ==
: Meeting with Marcin. Finished [[D3D Requirements]] together.

== Dec 25, 2015 ==
: Some progress in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 25, 2015 ==
: Made [https://github.com/tobbelobb/D3D_Printer Github repo] for D3D Printer OpenSCAD design.

== Dec 23, 2015 ==
: Wrote something on the D3D Printer design. [[D3D Fusion Printer Design]] Needs to be fitted into a template.

== Dec 22, 2015 ==
: Work on visa application process. Skype meeting with Marcin. Discussion points:
:# [[Torbjorn DEF Agreement]]. DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
:# Locking in design requirements - [[D3D Requirements]] - both overall and module by module
:# Defining the 'story' for the thesis. [[D3D Thesis Story]].
:# Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
: Found some data: [https://www.3dhubs.com/trends]
: Nice discussion on hangout, got some text produced from it: [https://docs.google.com/document/d/1Ber5iA-2V7m_3mbh54ZsuRB-viTLd-sfb9GL3jj58GQ/edit?ts=5679a219]
: Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: [[Cut_From_Freenode_RepRap_22_Dec]]

== Dec 21, 2015 ==
: Initiated Project Plan [[D3D Fusion project plan]]. This is what Martin must approve before we can move on. Made thesis skeleton [[D3D Fusion thesis#Thesis Skeleton]] from template in course documentation. Limited progress in FreeCAD.

== Dec 19, 2015 ==
: Commented proposed D3D requirements: [[Talk:D3D Requirements]]. Added Lyman extruder to [[Open Source Filament Extruders]]. ''See [[Power Tool Construction Set]].

== Dec 16, 2015 ==
: Presented some 3d printer design ideas in [[D3D Fusion printer design]].

== Dec 15, 2015 ==
: Summarized short research about prior work of Prusa: [[D3D Fusion thesis#Earlier Work]]

== Sun Dec 13, 2015 ==
: Wrote short [[D3D Fusion#Business norms and science norms]] comparison between DE norms and science norms.

== Thu Dec 10, 2015 ==
: Initiated [[D3D Fusion thesis]] sketch. Also did a little overview on [[Large Scale Fused Pellet Fabrication]]. Got an overview of the MOST lab's work. Put in in [[D3D Fusion thesis]].

== Sun Dec 6, 2015 ==
: Initiated this work log. Initiated [[D3D Fusion]]. Initiated D3D dev spreadsheed [https://docs.google.com/spreadsheets/d/1q4Smbyc0_MUNIIFQjmBc1-yq6sgeVxerCedJtWzahdo/edit#gid=1&vpid=A1]. Embedding [[D3D Fusion#Development spreadsheet| Done]]

[[Category:Logs]]

Servos

2016-09-21T14:07:50Z

Tobben:

RepRap 3d-printer axes are often stepper motor driven. Modern proprietary 2d-printers almost always use servos (DC motor + encoder) instead. Servo-based drives are often lighter and cheaper as well as featuring closed loop control.

== Sources ==
* [https://www.youtube.com/watch?v=L-_5KsAOVko State-of-the-art RepRap servo usage video, 2016]
* [https://www.youmagine.com/designs/dc-motor-closed-loop-control-software Code used in video, 2016]
* [https://arduino-pi.blogspot.se/2014/05/arduino-pid-library-for-position.html Blog on Arduino PID library for 3d-printer, 2015]
* [http://forums.reprap.org/read.php?14,7128 RepRap forums, a worked servo example, 2007]
* [http://reprap.org/wiki/Motor_control_loop RepRap Wiki on Motor Control Loop]
* [http://reprap.org/wiki/RepRapServo_1_0 RepRapServo 1.0 active before, 2012]
* [http://reprap.org/wiki/GearMotorStepper RepRap Wiki GearMotorStepper]
* [http://reprap.org/wiki/Motor_FAQ RepRap Motor FAQ]
* [http://openservo.com/ Open Servo. Active before 2012.]
* [http://openservo.com/OpenEncoder Open Encoder]
* [https://github.com/sanchosk/MyToyRep MyToyRep] experiments with DC motor usage on all axes
* [http://forums.reprap.org/read.php?1,661444 This large forum thread] is large but walks through much of RepRap's current DC servo knowledge, 2016
* [http://reprap.org/wiki/Nophead%27s_Extruder_Tweaks Nophead's extruder tweaks] mentions DC motor usage for extruders, 2010

Servos

2016-09-21T12:48:40Z

Tobben:

Servos

2016-09-21T12:47:39Z

Tobben:

Tobben Log

2016-09-21T11:44:43Z

Tobben:

{{RightTOC}}
[[Torbjorn CV]]. [http://vitana.se/opr3d/tbear/ RepRap Blog].

I want to give people production power. I have a Master's in engineering physics and love self-replication. It is my tool to create and distribute production power. I love it in ideas, in free software, in RepRaps, in workshops and in complete enterprises.

== September 21, 2016 ==
: Looking at [http://builders.reprap.org/2008/04/first-tests-of-haydon-linear-actuator.html Haydon linear actuator] as option for easily built RepRap design.

== September 19, 2016 ==
: [[Servos]]

== September 14, 2016 ==
: Registered Ludvigsen 3d-printing and [http://www.appropedia.org/Clerck,_a_RepRap_3D_printer_hanging_from_the_ceiling the Hangprinter] for [https://www.facebook.com/events/1052788231502429/ 3d printing festival]
: Contacted [http://www.smykkekurs.no/ Smykkeskolen] about cooperation around starting FabLab in Larvik, arranging meeting...
: Continued [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 discussion about gcode modularity]

== September 13, 2016 ==
: Lively discussion about gcode modularity in [http://forums.reprap.org/read.php?1,705311,707327#msg-707327 RepRap forum thread].
: Got in touch with creator of [http://dollo3d.com/ RepRap Dollo]
: Emailed thesis to Jo Prusa
: Yearly finiancial statements report for my limited company using [https://gnucash.org/ Gnucash] approved by Norwegian tax authorities

== September 8-10, 2016 ==
: Field visit to [http://fellesverkstedet.no/ Fellesverkstedet] FabLab, [http://sonen.ifi.uio.no/ Åpen Sone] hackerspace, [http://www.tekniskmuseum.no/besok-oss/nyheter/1012-makerspace-lanseres-i-norge Teknoteket] Makerspace and [https://bitraf.no/ Bitaf] Hackerspace in Oslo.
: [[Vbird]] is a good start at a scalable, cheap, good linear actuator design
: Attended when [https://www.youtube.com/watch?v=OKeNQYNJM1I Koka and Bernt Isak Wærstad gave a distributed musical experience at Birtraf]

== September 7, 2016 ==
: Installed GuixSD on laptop by following [https://www.gnu.org/software/guix/manual/html_node/System-Installation.html#System-Installation these steps]. Extra time spent due to GuixSD being in beta very noticeable.

== September 6, 2016 ==
: New blog post: http://vitana.se/opr3d/tbear/index.html#portable_gcode_1
: Discussion in [http://forums.reprap.org/read.php?1,705311 portable gcode thread]
: Continued discussion in [http://forums.reprap.org/read.php?14,607341,705398 forum thread about lead screw for RepRap X and Y axes]

== September 5, 2016 ==
: Poll RepRap forums for interest in modular gcode: http://forums.reprap.org/read.php?1,705311
: Found good method for establishing a reference operating system: Specify a Guix configuration file. Guix VM creation seems easier than earlier proposed Docker image solution for D3D-Porteus distribution. See https://archive.fosdem.org/2016/schedule/event/deployments_with_gnu_guix/

== June 16, 2016 ==
: Master's approved.
: Approved version of thesis: [[File:Thesis.pdf]]

== June 10, 2016 ==
: Defended Master's: [[File:Thesis_presentation_tobben.pdf]]

== June 7, 2016 ==
: Got a Chromebook into [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]] =)

== June 6, 2016 ==
: [[3D_Printer_Workshops]]
: Finished presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 5, 2016 ==
: Working on presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 2, 2016 ==
: A couple of new laptop models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== May 31, 2016 ==
: Found some RepRap structural virality data at http://maytheclonebewithyou.com/.
: Included it in new version of thesis: [[D3D_Thesis#PDF_uploads]]
: Data collection scripts and such here: [https://github.com/tobbelobb/clone-analysis-scripts]

== May 24, 2016 ==
: New version of thesis uploaded [[D3D_Thesis#PDF_uploads]]

== May 18, 2016 ==
: Needed some data on other RepRap assembly workshops' toolchains. Found 22 workshops, but most with limited info. Summarized here: [[File:Assembly workshops data collection through web search.ods]], published there: [[3D_Printer_Workshops_Analysis_of_Industry_Standards#Workshops_List]]

== May 13, 2016 ==
: Uploaded thesis work in progress draft and made a place to put it: [[D3D_Thesis#PDF_uploads]]
: Contacted [http://botbuilder.net/ botbuilder.net] asking for input on D3D-Porteus

== April 22, 2016 ==
: RepRap Wiki user MarcusWolschon has listed files needed to print RepRap assembly tools for workshops: [http://reprap.org/wiki/Development:Workshop_Tools]
: RepRap forums user xoan already made a Live ISO based on Debian with similar intentions as ours: [http://forums.reprap.org/read.php?1,474414,591715][http://meikian.eu/]

== April 18, 2016 ==
: One new model in [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== April 14, 2016 ==
: Sketched a Z-axis for the D3D Printer: [http://opensourceecology.org/wiki/File:Z_axis1.png]
: All code changes committed to [https://github.com/tobbelobb/D3D_Printer/tree/stripped repo].

== April 13, 2016 ==
: Master's writing is going fairly well. Some development on D3D printer this week: [[D3D_Printer_Design_Process#Concept_Creation_Incomplete_Frame]]
: Two commits to [https://github.com/tobbelobb/D3D_Printer/tree/stripped branch new branch called 'stripped' in D3D_Printer repo]

== April 10, 2016 ==
: [[D3D_Printer_Design_Process#Previous_Implementations]]

== Mar 29, 2016 ==
: Completing comments and some new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== Mar 26, 2016 ==
: Elaborated distributive enterprise part a bit: [[D3D_Value_Proposition#Main_Points]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Not_Booting_D3D_Porteus]]
: Documented payment model: [[D3D_Business_Plan#Tips_and_Tricks_for_Hosts]]
: First complete run with Quality Control Interface. See [[3D_Printer_Quality_Control_Interface]] and https://github.com/tobbelobb/D3D-Printrun.
: [[3D_Printer_Quality_Control_Interface#Videos_Showing_Expected_Behavior]]
: Updated Marlin to give prettier output for QCface. See https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin.
: Initiated repo for D3D-Porteus: https://github.com/tobbelobb/D3D-Porteus
: [[3D_Printer_Workshop_Survey#Torbjorn]]

== Mar 24, 2016 ==
: Invited users of Porteus to better map which/how laptop models work with Porteus: https://forum.porteus.org/viewtopic.php?f=61&t=5658

== Mar 21, 2016 ==
: [[3D_Printer_Quality_Control_Interface]] ready for first test usage. See https://github.com/tobbelobb/D3D-Printrun
: [[D3D_Thesis#Societal_Impact_of_Digital_Technology]]

== Mar 19, 2016 ==
: Published repo for D3D-Printrun: https://github.com/tobbelobb/D3D-Printrun

== Mar 18, 2016 ==
: Prepared [https://docs.google.com/forms/d/136AIOvtZ9ste7SKgrEkQlrcxanXyZDaiAwDbZ98fLQQ/viewform data collection form] for workshop participants.

== Mar 17, 2016 ==
: [[3D_Printer_Build_Plate#Polyethylenimine_.28PEI.29]]
: [[3D_Printer_Build_Plate#Polyisocyanurate_.28PIR.29_Foam]]
: Minor update to Slic3r settings in Porteus: [[File:D3D_Workshop_Configuration_64-bit_4.xzm]]

== Mar 16, 2016 ==
: Minor update to Marlin for D3D Porteus: [[File:Marlin in home.xzm]]. Transferred to Porteus USB at OSE.

== Mar 15, 2016 ==
: [[3D_Printer_Quality_Control_Interface]]

== Mar 11, 2016 ==
: [[Tobbens_Adding_Inductive_Proximity_Sensor_Log#Repeatability_at_Changing_Temperature]]
: [[Folgertech_Kit#Improvements]]
: [[Tobbens_Folgertech_Kit_Assembly_Log#Results]]

== Mar 10, 2016 ==
: On compensating curved print beds: [https://github.com/MarlinFirmware/Marlin/pull/1619]

== Mar 7, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log#Data]]
: [[Tobbens Adding Inductive Proximity Sensor Log#Implementation]]

== Mar 6, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log]]
: New model added to [[D3D Live ISO#Computer Models Verified to Boot]]

== Mar 5, 2016 ==
: [https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin D3D_Folgertech_Prusai3_Marlin repo]
: [[Tobbens Folgertech Kit Assembly Log]]
: Started a Python script for future automation of this pre-flight quality control, published [https://github.com/tobbelobb/RepRap_QC_scripts/blob/master/pre_flight_routine.py here]
: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v2.iso Porteus-D3D-Workshop-x86_64-v2.iso]

== Mar 4, 2016 ==
: [http://forums.reprap.org/read.php?14,607341,634998#msg-634998 Reports on speed limit] of cheapest and most easily built drive system of single threaded rod + stepper motor. Research suggesting anti-resonant drivers could be cheaper than aggressively threaded lead screws posted in [http://forums.reprap.org/read.php?14,607341,635107#msg-635107 forum thread].
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 3, 2016 ==
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 2, 2016 ==
: [[D3D Live ISO#Computer Models Verified to Boot]]
: Some activity on [http://forums.reprap.org/read.php?14,607341,634531#msg-634531 Lead Screw forum thread].

== Feb 28, 2016 ==
: Mapped OpenSCAD dependencies properly [http://opensourceecology.org/wiki/File:Openscad2.png Dependency map]
: Re-compiled OpenSCAD, uploaded new 64-bit iso: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v1.iso Porteus-D3D-Workshop-x86_64-v1.iso]. Updated [[D3D Live ISO#Instructions]] link.

== Feb 26, 2016 ==
: Been through [https://en.wikipedia.org/wiki/Dependency_hell Dependency hell] trying to compile CAD software to Porteus. OpenSCAD works now, FreeCAD doesn't.

== Feb 25, 2016 ==
: [[D3D Live ISO#On Creating xzm Packages]]

== Feb 24, 2016 ==
: Published 64-bit Porteus ISO. See [[D3D Live ISO#Instructions]] Still lacks configured Marlin source code.
: Tried to compile FreeCAD. [[D3D Live ISO#Compilation of FreeCAD]] Abandoned because of difficulties with compiling Coin3.
: Documented creation of 64-bit Arduino package: [[D3D Live ISO#Arduino]]

== Feb 23, 2016 ==
: Compiled gcc-5.3.0 package for 64-bit version of Porteus and documented the process: [[D3D Live ISO#Choice of Compiler Version]]
: Compiled OpenSCAD package for Porteus and documented the process: [[D3D Live ISO#CAD Software]]

== Feb 22, 2016 ==
: Got OpenSCAD 2015.03 to work on the 32-bit Live USB.
: Uploaded ~600 MiB iso file [http://vitana.se/opr3d/tbear/iso/Porteus_pronterface_slic3r_arduino_openscad_conf_i486.iso here].
: Minor changes to [[D3D Live ISO]]
: [[D3D Live ISO#Steps to boot Porteus on Macbook Air 2011]]

== Feb 21, 2016 ==
: Made repo with D3D Porteus Live USB OS [https://github.com/tobbelobb/D3D_Workshop_Configuration config files]
: Compiled GCC 5.3.0 for use in 32-bit version of Porteus: [http://vitana.se/opr3d/tbear/xzm/devel/gcc-5.3.0-i486.xzm xzm package link]

== Feb 19, 2016 ==
: [[D3D Thesis#Line of Reasoning]]
: [[D3D Thesis#Background]]
: [[3D Printer Build Plate]]
: Updated point 15 on [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 18, 2016 ==
: Got iso size down from 493 MiB (517 MB) to 299 MiB (313 MB). See [[D3D Live ISO#Stripping it down]] and updated download link in [[D3D Live ISO#Instructions]]
: Completed [[Tobbens Folgertech Kit Unboxing Log]] with some images and clarifying comments

== Feb 17, 2016 ==
: [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 16, 2016 ==
: Ordered four LJ12A3-4-Z/BX Inductive Proximity Sensor Switches.
: Ordered GT2 belts, pulleys and belt tensioning springs.
: Ordered signal switching 1N4148 diodes.
: [[Research On Inductive Proximity Sensors]]
: Updated [[File:Bed leveling and compensation comparison.ods]] with [https://www.youtube.com/watch?v=EcGFLwj0pnA Thomas Sanladerer's recommendation] and further comments on inductive sensing.
: Researched some brackets for induction sensor: [[Folgertech Kit#Candidates For Improvement Resolution]]

== Feb 15, 2016 ==
: New extensive Folgertech resource found: [[Folgertech Kit#Other Instructionals]].
: [[Gcode Modularity]]
: More work on [[D3D Live ISO]]. Got Slic3r working nicely, and integrated with Pronterface. Got Arduino IDE working. Latest version ISO: [http://vitana.se/opr3d/tbear/iso/Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso]
: [https://docs.google.com/presentation/d/1-kF_PPt1NU2PQZHaQFh712hjdcBuCc3dafmPdRSzNu0/edit?ts=56c23f04#slide=id.g1192b7f2d5_0_8 Prototype Planning]

== Feb 13, 2016 ==
: Further Porteus config. Now handling Pronterface better, updated iso to v1. See [[D3D Live ISO#ISO images]]

== Feb 11, 2016 ==
: [[D3D Live ISO]]
: Tested out [http://ProjectLibre.org/ Project Libre] with Andreas. [[File:D3D.pod]]

== Feb 9, 2016 ==
: Experiment with 3D printing assembly manual using only OpenSCAD renders as visuals: [http://Vitana.se/opr3d/tbear/index.html#Clerck_assembly_manual Clerck assembly manual]
: [[D3D Live ISO]]
: Helped by Andreas to create [[D3D Thesis Project Plan#Map of Deliverables]] to more easily manage myself and include others.

== Feb 5, 2016 ==
: Adjustments to [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 lead screw sourcing forum post] from yesterday.
: Ordered F6-12 thrust bearings for prototyping.

== Feb 4, 2016 ==
: Sourcing research on lead screws. Posted in [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 forum thread].
: Igus links in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]]
: Ordered following products for lead screw prototyping: [http://no.rs-online.com/web/p/products/8854956/], [http://no.rs-online.com/web/p/products/8854814/], [http://no.rs-online.com/web/p/products/8854830/], [http://no.rs-online.com/web/p/products/8854827/], [http://no.rs-online.com/web/p/products/8854987/]

== Feb 2, 2016 ==
: Initiated [[3D Printer Quality Control Research]]
: Initiated [[3D Printer Extruder Research]]
: Researched [[3D Printer Bed Leveling]]. See [[File:Bed leveling and compensation comparison.ods]] for full assessment matrix.

== Feb 1, 2016 ==
: Small change to [[Prusa i3 Build]].
: New research and complete rewrite of [[3D Printer Bed Leveling]].
: Small change to [[3D Printer Hot End Research]].
: Initiated [[3D Printer Print Surface Research]].

== Jan 30, 2016 ==
: [[D3D Workshop Roadmap]], [[D3D Workshop Slogans]], [https://docs.google.com/presentation/d/1duikQl9HMfHuUVAIQv4cDy1sGWZLujFzLxMRIGej5AY/edit?pref=2&pli=1#slide=id.p Folgertech 2020 Prusa i3 build working document], [https://www.facebook.com/OpenSourceEcology/photos/a.10151381815921562.574965.66469461561/10154554553731562/?type=3&theater Build Facebook post]

== Jan 29, 2016 ==
: Meeting with Jonathan and Marcin.
:* We should investigate bulk prices for key parts (like stepper motors)
:* I (Tobben) should collect some stories from the people I've given printers to. Stories of people who got empowered and made some money with their new RepRap knowledge and machines.
:* Thesis data collection nr 1 happens tomorrow when Folgertech Prusa i3 kit is assembled on the Factor e farm.

== Jan 23, 2016 ==
: [[3D Printer Bed Leveling]]
: [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.g10745b77da_3_3 Prusa i3 selection Google document]

== Jan 20, 2016 ==
: Created [http://forums.reprap.org/read.php?1,612676 forum thread] asking for input on workshop kits.

== Jan 19, 2016 ==
: CADded LM8UU standard linear bearings into D3D Printer (see repo).
: Meeting on kit selection [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.p Kit considerations]
: [[Prusa i3 Development]]
: [[3D Printer Kit for Workshop Research]]
: [[3D Printer Hot End Research]]

== Jan 17, 2016 ==
: [[D3D Thesis#Workshop Reproducibility]], some reserve plans created in [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project]

== Jan 13, 2016 ==
: Wrote [[D3D Thesis Project Plan]], sent to examiner.
: More insights on lead screws on the [http://forums.reprap.org/read.php?14,607341,607483 forum thread].
: Verification from [http://www.vermontrapidprototyping.com/3dprinters Vermont Rapid Prototyping] that lead screws used by Trinitylabs lasts for at least 2 years. Put in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]].

== Jan 12, 2016 ==
: [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project], embedded in [[D3D Thesis Project Plan]].
: Bought:
:* 3xForce Sensing Resistors (Interlink Electronics FSR 400) for prototyping
:* [https://ultimachine.com/content/rambo-13-complete-kit RAMBO v1.3 for prototyping]
: [[3D Printer Troubleshooting]]

== Jan 11, 2016 ==
: Wrote and published [[D3D Thesis#Team Charter]].
: [[D3D Enterprise Logic Model]]

== Jan 10, 2016 ==
: Some progress on the [http://forums.reprap.org/read.php?14,607341,607483 lead screw forum thread]. Emailed more skillful developers.
: Read up on possible choices for [[D3D Printer Electronics]]. Ordered smooth rods with linear bearings (sizes 8 mmm and 10 mm) for prototyping. Ordered powdered graphite for lubrication testing.

== Jan 9, 2016 ==
: Verification of lead screw: [https://YouTube.com/watch?v=gk9lhcTGSH4 working all-leadscrew 3D printer], [[Stepper Motor#Torque Tests]], [[D3D Printer Design Process#Verification Steps Taken for Lead Screw .2B Stepper Motor Concept]]
: Bought:
:* [http://eBay.com/itm/301833740948?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 1] and
:* [http://www.ebay.com/itm/262200758350?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 2] for some hands-on testing in February.
: Contacted [http://MooreInternational.co.uk Moore International] and [http://Danish3d.dk Danish 3D] for help with choice and supply of lead screws.
: Discovered [http://Contraptor.org Contraptor] that tries to use the concept of modular linear motion units, put into [[D3D Thesis#Earlier Work]].
: Read up on [[3D Printer Bed Leveling]].
: Summarized state of lead screw discussion in the RepRap community in a [http://forums.reprap.org/read.php?14,607341 forum thread asking for further insights]. Emailed various developers with lead screw designs, asking for experiences, thoughts, insights...
: [[3D Printer Filament Load Sensor]]

== Jan 8, 2016 ==
: Some work on the [[D3D Design Methodology]].
: Some usage of it logged in [[D3D Printer Design Process]].
: Meeting with Marcin, initiated [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path doc].

== Jan 7, 2016 ==
: Checked/commented on lifetimes: [[Stepper Motor#Lifetime]], [[FFF Extruder]], [[Lead Screw]]
: Structuring of 3D printer design work: [[D3D Printer Design Process]], [[D3D Design Methodology]].
: Structured wiki pages such that [[D3D Thesis]] is a sub-project of [[D3D Fusion]]. Changed [[D3D Fusion Project Plan]] to reflect this and initiated [[D3D Thesis Project Plan]].
: The thesis project aims to bootstrap the [[D3D Workshop Kit]].
: Explained structure in [[D3D Fusion#Naming and Links]]

== Jan 6, 2016 ==
: Meeting with Andreas S, [https://docs.google.com/spreadsheets/d/1-NuTg0c_uta0i3vNUZtciD3cq6j1bS4RKWCIG8AOaR0/edit#gid=0 Work Breakdown Structure], [https://docs.google.com/presentation/d/1CrmuvgX19dYkeBbUlYqTmXBTjc8wqiDNU7MEwVNuTsg/edit#slide=id.geb160911a_2_25 D3D Team Project Charter].
: Meeting with Marcin [https://docs.google.com/presentation/d/1jXC3V40cHqc2P8Oo-G2Z1G7IyytujYb4R3rIT9nZCpI/edit#slide=id.g8184a0e10_0_101 Long term Distributive Enterprise Milestones]
: Wrote something on [[D3D Fusion thesis#Funding Mechanisms for Open Source Work]]

== Jan 5, 2016 ==
: [[D3D Fusion Printer Conceptual Design]]

== Jan 4, 2016 ==
: Wrote some [https://Overleaf.com/read/vmpdtnzsgdgg Project Plan stuff on Overleaf]. 3h meeting with Marcin. Finished [https://docs.google.com/document/d/1sQKi3QuQ1yPu_08zyo1cLMhrQGytiTHL4Mfd7JMUK2M/edit?ts=568a0631 OSE NEGOTIATION INVITATION].

== Jan 3, 2016 ==
: Defined moving part of D3D Printer's linear actuator. Reorganized code and wrote README (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Jan 2, 2016 ==
: Added [[D3D Fusion printer design#Weight calculation for steel sheet frame]] and [[D3D Fusion printer design#Motor placement]] to wiki. Two minor commits in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 31, 2015 ==
: Re-organized [[D3D Requirements]]. Some progress on [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 30, 2015 ==
: Meeting with Marcin. Started [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 28, 2015 ==
: Reworked l_plate and basic frame (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 27, 2015 ==
: First rough visualization of D3D Fusion Printer done (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 26, 2015 ==
: Meeting with Marcin. Finished [[D3D Requirements]] together.

== Dec 25, 2015 ==
: Some progress in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 25, 2015 ==
: Made [https://github.com/tobbelobb/D3D_Printer Github repo] for D3D Printer OpenSCAD design.

== Dec 23, 2015 ==
: Wrote something on the D3D Printer design. [[D3D Fusion Printer Design]] Needs to be fitted into a template.

== Dec 22, 2015 ==
: Work on visa application process. Skype meeting with Marcin. Discussion points:
:# [[Torbjorn DEF Agreement]]. DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
:# Locking in design requirements - [[D3D Requirements]] - both overall and module by module
:# Defining the 'story' for the thesis. [[D3D Thesis Story]].
:# Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
: Found some data: [https://www.3dhubs.com/trends]
: Nice discussion on hangout, got some text produced from it: [https://docs.google.com/document/d/1Ber5iA-2V7m_3mbh54ZsuRB-viTLd-sfb9GL3jj58GQ/edit?ts=5679a219]
: Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: [[Cut_From_Freenode_RepRap_22_Dec]]

== Dec 21, 2015 ==
: Initiated Project Plan [[D3D Fusion project plan]]. This is what Martin must approve before we can move on. Made thesis skeleton [[D3D Fusion thesis#Thesis Skeleton]] from template in course documentation. Limited progress in FreeCAD.

== Dec 19, 2015 ==
: Commented proposed D3D requirements: [[Talk:D3D Requirements]]. Added Lyman extruder to [[Open Source Filament Extruders]]. ''See [[Power Tool Construction Set]].

== Dec 16, 2015 ==
: Presented some 3d printer design ideas in [[D3D Fusion printer design]].

== Dec 15, 2015 ==
: Summarized short research about prior work of Prusa: [[D3D Fusion thesis#Earlier Work]]

== Sun Dec 13, 2015 ==
: Wrote short [[D3D Fusion#Business norms and science norms]] comparison between DE norms and science norms.

== Thu Dec 10, 2015 ==
: Initiated [[D3D Fusion thesis]] sketch. Also did a little overview on [[Large Scale Fused Pellet Fabrication]]. Got an overview of the MOST lab's work. Put in in [[D3D Fusion thesis]].

== Sun Dec 6, 2015 ==
: Initiated this work log. Initiated [[D3D Fusion]]. Initiated D3D dev spreadsheed [https://docs.google.com/spreadsheets/d/1q4Smbyc0_MUNIIFQjmBc1-yq6sgeVxerCedJtWzahdo/edit#gid=1&vpid=A1]. Embedding [[D3D Fusion#Development spreadsheet| Done]]

[[Category:Logs]]

2016-09-10T16:18:18Z

Tobben: /* September 8-10, 2016 */

{{RightTOC}}
[[Torbjorn CV]].

I want to give people production power. I have a Master's in engineering physics and love self-replication. It is my tool to create and distribute production power. I love it in ideas, in free software, in RepRaps, in workshops and in complete enterprises.

== September 8-10, 2016 ==
: Field visit to [http://fellesverkstedet.no/ Fellesverkstedet] FabLab, [http://sonen.ifi.uio.no/ Åpen Sone] hackerspace, [http://www.tekniskmuseum.no/besok-oss/nyheter/1012-makerspace-lanseres-i-norge Teknoteket] Makerspace and [https://bitraf.no/ Bitaf] Hackerspace in Oslo.
: [[Vbird]] is a good start at a scalable, cheap, good linear actuator design
: Attended when [https://www.youtube.com/watch?v=OKeNQYNJM1I Koka and Bernt Isak Wærstad gave a distributed musical experience at Birtraf]

== September 7, 2016 ==
: Installed GuixSD on laptop by following [https://www.gnu.org/software/guix/manual/html_node/System-Installation.html#System-Installation these steps]. Extra time spent due to GuixSD being in beta very noticeable.

== September 6, 2016 ==
: New blog post: http://vitana.se/opr3d/tbear/index.html#portable_gcode_1
: Discussion in [http://forums.reprap.org/read.php?1,705311 portable gcode thread]
: Continued discussion in [http://forums.reprap.org/read.php?14,607341,705398 forum thread about lead screw for RepRap X and Y axes]

== September 5, 2016 ==
: Poll RepRap forums for interest in modular gcode: http://forums.reprap.org/read.php?1,705311
: Found good method for establishing a reference operating system: Specify a Guix configuration file. Guix VM creation seems easier than earlier proposed Docker image solution for D3D-Porteus distribution. See https://archive.fosdem.org/2016/schedule/event/deployments_with_gnu_guix/

== June 16, 2016 ==
: Master's approved.
: Approved version of thesis: [[File:Thesis.pdf]]

== June 10, 2016 ==
: Defended Master's: [[File:Thesis_presentation_tobben.pdf]]

== June 7, 2016 ==
: Got a Chromebook into [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]] =)

== June 6, 2016 ==
: [[3D_Printer_Workshops]]
: Finished presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 5, 2016 ==
: Working on presentation: [[File:Thesis_presentation_tobben.pdf]]

== June 2, 2016 ==
: A couple of new laptop models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== May 31, 2016 ==
: Found some RepRap structural virality data at http://maytheclonebewithyou.com/.
: Included it in new version of thesis: [[D3D_Thesis#PDF_uploads]]
: Data collection scripts and such here: [https://github.com/tobbelobb/clone-analysis-scripts]

== May 24, 2016 ==
: New version of thesis uploaded [[D3D_Thesis#PDF_uploads]]

== May 18, 2016 ==
: Needed some data on other RepRap assembly workshops' toolchains. Found 22 workshops, but most with limited info. Summarized here: [[File:Assembly workshops data collection through web search.ods]], published there: [[3D_Printer_Workshops_Analysis_of_Industry_Standards#Workshops_List]]

== May 13, 2016 ==
: Uploaded thesis work in progress draft and made a place to put it: [[D3D_Thesis#PDF_uploads]]
: Contacted [http://botbuilder.net/ botbuilder.net] asking for input on D3D-Porteus

== April 22, 2016 ==
: RepRap Wiki user MarcusWolschon has listed files needed to print RepRap assembly tools for workshops: [http://reprap.org/wiki/Development:Workshop_Tools]
: RepRap forums user xoan already made a Live ISO based on Debian with similar intentions as ours: [http://forums.reprap.org/read.php?1,474414,591715][http://meikian.eu/]

== April 18, 2016 ==
: One new model in [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== April 14, 2016 ==
: Sketched a Z-axis for the D3D Printer: [http://opensourceecology.org/wiki/File:Z_axis1.png]
: All code changes committed to [https://github.com/tobbelobb/D3D_Printer/tree/stripped repo].

== April 13, 2016 ==
: Master's writing is going fairly well. Some development on D3D printer this week: [[D3D_Printer_Design_Process#Concept_Creation_Incomplete_Frame]]
: Two commits to [https://github.com/tobbelobb/D3D_Printer/tree/stripped branch new branch called 'stripped' in D3D_Printer repo]

== April 10, 2016 ==
: [[D3D_Printer_Design_Process#Previous_Implementations]]

== Mar 29, 2016 ==
: Completing comments and some new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]

== Mar 26, 2016 ==
: Elaborated distributive enterprise part a bit: [[D3D_Value_Proposition#Main_Points]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Verified_to_Boot]]
: Three new models: [[D3D_Live_ISO#Computer_Models_Not_Booting_D3D_Porteus]]
: Documented payment model: [[D3D_Business_Plan#Tips_and_Tricks_for_Hosts]]
: First complete run with Quality Control Interface. See [[3D_Printer_Quality_Control_Interface]] and https://github.com/tobbelobb/D3D-Printrun.
: [[3D_Printer_Quality_Control_Interface#Videos_Showing_Expected_Behavior]]
: Updated Marlin to give prettier output for QCface. See https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin.
: Initiated repo for D3D-Porteus: https://github.com/tobbelobb/D3D-Porteus
: [[3D_Printer_Workshop_Survey#Torbjorn]]

== Mar 24, 2016 ==
: Invited users of Porteus to better map which/how laptop models work with Porteus: https://forum.porteus.org/viewtopic.php?f=61&t=5658

== Mar 21, 2016 ==
: [[3D_Printer_Quality_Control_Interface]] ready for first test usage. See https://github.com/tobbelobb/D3D-Printrun
: [[D3D_Thesis#Societal_Impact_of_Digital_Technology]]

== Mar 19, 2016 ==
: Published repo for D3D-Printrun: https://github.com/tobbelobb/D3D-Printrun

== Mar 18, 2016 ==
: Prepared [https://docs.google.com/forms/d/136AIOvtZ9ste7SKgrEkQlrcxanXyZDaiAwDbZ98fLQQ/viewform data collection form] for workshop participants.

== Mar 17, 2016 ==
: [[3D_Printer_Build_Plate#Polyethylenimine_.28PEI.29]]
: [[3D_Printer_Build_Plate#Polyisocyanurate_.28PIR.29_Foam]]
: Minor update to Slic3r settings in Porteus: [[File:D3D_Workshop_Configuration_64-bit_4.xzm]]

== Mar 16, 2016 ==
: Minor update to Marlin for D3D Porteus: [[File:Marlin in home.xzm]]. Transferred to Porteus USB at OSE.

== Mar 15, 2016 ==
: [[3D_Printer_Quality_Control_Interface]]

== Mar 11, 2016 ==
: [[Tobbens_Adding_Inductive_Proximity_Sensor_Log#Repeatability_at_Changing_Temperature]]
: [[Folgertech_Kit#Improvements]]
: [[Tobbens_Folgertech_Kit_Assembly_Log#Results]]

== Mar 10, 2016 ==
: On compensating curved print beds: [https://github.com/MarlinFirmware/Marlin/pull/1619]

== Mar 7, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log#Data]]
: [[Tobbens Adding Inductive Proximity Sensor Log#Implementation]]

== Mar 6, 2016 ==
: [[Tobbens Adding Inductive Proximity Sensor Log]]
: New model added to [[D3D Live ISO#Computer Models Verified to Boot]]

== Mar 5, 2016 ==
: [https://github.com/tobbelobb/D3D_Folgertech_Prusai3_Marlin D3D_Folgertech_Prusai3_Marlin repo]
: [[Tobbens Folgertech Kit Assembly Log]]
: Started a Python script for future automation of this pre-flight quality control, published [https://github.com/tobbelobb/RepRap_QC_scripts/blob/master/pre_flight_routine.py here]
: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v2.iso Porteus-D3D-Workshop-x86_64-v2.iso]

== Mar 4, 2016 ==
: [http://forums.reprap.org/read.php?14,607341,634998#msg-634998 Reports on speed limit] of cheapest and most easily built drive system of single threaded rod + stepper motor. Research suggesting anti-resonant drivers could be cheaper than aggressively threaded lead screws posted in [http://forums.reprap.org/read.php?14,607341,635107#msg-635107 forum thread].
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 3, 2016 ==
: [[Tobbens Folgertech Kit Assembly Log]]

== Mar 2, 2016 ==
: [[D3D Live ISO#Computer Models Verified to Boot]]
: Some activity on [http://forums.reprap.org/read.php?14,607341,634531#msg-634531 Lead Screw forum thread].

== Feb 28, 2016 ==
: Mapped OpenSCAD dependencies properly [http://opensourceecology.org/wiki/File:Openscad2.png Dependency map]
: Re-compiled OpenSCAD, uploaded new 64-bit iso: [http://vitana.se/opr3d/tbear/iso/Porteus-D3D-Workshop-x86_64-v1.iso Porteus-D3D-Workshop-x86_64-v1.iso]. Updated [[D3D Live ISO#Instructions]] link.

== Feb 26, 2016 ==
: Been through [https://en.wikipedia.org/wiki/Dependency_hell Dependency hell] trying to compile CAD software to Porteus. OpenSCAD works now, FreeCAD doesn't.

== Feb 25, 2016 ==
: [[D3D Live ISO#On Creating xzm Packages]]

== Feb 24, 2016 ==
: Published 64-bit Porteus ISO. See [[D3D Live ISO#Instructions]] Still lacks configured Marlin source code.
: Tried to compile FreeCAD. [[D3D Live ISO#Compilation of FreeCAD]] Abandoned because of difficulties with compiling Coin3.
: Documented creation of 64-bit Arduino package: [[D3D Live ISO#Arduino]]

== Feb 23, 2016 ==
: Compiled gcc-5.3.0 package for 64-bit version of Porteus and documented the process: [[D3D Live ISO#Choice of Compiler Version]]
: Compiled OpenSCAD package for Porteus and documented the process: [[D3D Live ISO#CAD Software]]

== Feb 22, 2016 ==
: Got OpenSCAD 2015.03 to work on the 32-bit Live USB.
: Uploaded ~600 MiB iso file [http://vitana.se/opr3d/tbear/iso/Porteus_pronterface_slic3r_arduino_openscad_conf_i486.iso here].
: Minor changes to [[D3D Live ISO]]
: [[D3D Live ISO#Steps to boot Porteus on Macbook Air 2011]]

== Feb 21, 2016 ==
: Made repo with D3D Porteus Live USB OS [https://github.com/tobbelobb/D3D_Workshop_Configuration config files]
: Compiled GCC 5.3.0 for use in 32-bit version of Porteus: [http://vitana.se/opr3d/tbear/xzm/devel/gcc-5.3.0-i486.xzm xzm package link]

== Feb 19, 2016 ==
: [[D3D Thesis#Line of Reasoning]]
: [[D3D Thesis#Background]]
: [[3D Printer Build Plate]]
: Updated point 15 on [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 18, 2016 ==
: Got iso size down from 493 MiB (517 MB) to 299 MiB (313 MB). See [[D3D Live ISO#Stripping it down]] and updated download link in [[D3D Live ISO#Instructions]]
: Completed [[Tobbens Folgertech Kit Unboxing Log]] with some images and clarifying comments

== Feb 17, 2016 ==
: [[Tobbens Folgertech Kit Unboxing Log]]

== Feb 16, 2016 ==
: Ordered four LJ12A3-4-Z/BX Inductive Proximity Sensor Switches.
: Ordered GT2 belts, pulleys and belt tensioning springs.
: Ordered signal switching 1N4148 diodes.
: [[Research On Inductive Proximity Sensors]]
: Updated [[File:Bed leveling and compensation comparison.ods]] with [https://www.youtube.com/watch?v=EcGFLwj0pnA Thomas Sanladerer's recommendation] and further comments on inductive sensing.
: Researched some brackets for induction sensor: [[Folgertech Kit#Candidates For Improvement Resolution]]

== Feb 15, 2016 ==
: New extensive Folgertech resource found: [[Folgertech Kit#Other Instructionals]].
: [[Gcode Modularity]]
: More work on [[D3D Live ISO]]. Got Slic3r working nicely, and integrated with Pronterface. Got Arduino IDE working. Latest version ISO: [http://vitana.se/opr3d/tbear/iso/Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso Porteus_with_Pronterface_Slic3r_Arduino_and_D3D_Conf_v0.iso]
: [https://docs.google.com/presentation/d/1-kF_PPt1NU2PQZHaQFh712hjdcBuCc3dafmPdRSzNu0/edit?ts=56c23f04#slide=id.g1192b7f2d5_0_8 Prototype Planning]

== Feb 13, 2016 ==
: Further Porteus config. Now handling Pronterface better, updated iso to v1. See [[D3D Live ISO#ISO images]]

== Feb 11, 2016 ==
: [[D3D Live ISO]]
: Tested out [http://ProjectLibre.org/ Project Libre] with Andreas. [[File:D3D.pod]]

== Feb 9, 2016 ==
: Experiment with 3D printing assembly manual using only OpenSCAD renders as visuals: [http://Vitana.se/opr3d/tbear/index.html#Clerck_assembly_manual Clerck assembly manual]
: [[D3D Live ISO]]
: Helped by Andreas to create [[D3D Thesis Project Plan#Map of Deliverables]] to more easily manage myself and include others.

== Feb 5, 2016 ==
: Adjustments to [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 lead screw sourcing forum post] from yesterday.
: Ordered F6-12 thrust bearings for prototyping.

== Feb 4, 2016 ==
: Sourcing research on lead screws. Posted in [http://forums.reprap.org/read.php?14,607341,621359#msg-621359 forum thread].
: Igus links in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]]
: Ordered following products for lead screw prototyping: [http://no.rs-online.com/web/p/products/8854956/], [http://no.rs-online.com/web/p/products/8854814/], [http://no.rs-online.com/web/p/products/8854830/], [http://no.rs-online.com/web/p/products/8854827/], [http://no.rs-online.com/web/p/products/8854987/]

== Feb 2, 2016 ==
: Initiated [[3D Printer Quality Control Research]]
: Initiated [[3D Printer Extruder Research]]
: Researched [[3D Printer Bed Leveling]]. See [[File:Bed leveling and compensation comparison.ods]] for full assessment matrix.

== Feb 1, 2016 ==
: Small change to [[Prusa i3 Build]].
: New research and complete rewrite of [[3D Printer Bed Leveling]].
: Small change to [[3D Printer Hot End Research]].
: Initiated [[3D Printer Print Surface Research]].

== Jan 30, 2016 ==
: [[D3D Workshop Roadmap]], [[D3D Workshop Slogans]], [https://docs.google.com/presentation/d/1duikQl9HMfHuUVAIQv4cDy1sGWZLujFzLxMRIGej5AY/edit?pref=2&pli=1#slide=id.p Folgertech 2020 Prusa i3 build working document], [https://www.facebook.com/OpenSourceEcology/photos/a.10151381815921562.574965.66469461561/10154554553731562/?type=3&theater Build Facebook post]

== Jan 29, 2016 ==
: Meeting with Jonathan and Marcin.
:* We should investigate bulk prices for key parts (like stepper motors)
:* I (Tobben) should collect some stories from the people I've given printers to. Stories of people who got empowered and made some money with their new RepRap knowledge and machines.
:* Thesis data collection nr 1 happens tomorrow when Folgertech Prusa i3 kit is assembled on the Factor e farm.

== Jan 23, 2016 ==
: [[3D Printer Bed Leveling]]
: [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.g10745b77da_3_3 Prusa i3 selection Google document]

== Jan 20, 2016 ==
: Created [http://forums.reprap.org/read.php?1,612676 forum thread] asking for input on workshop kits.

== Jan 19, 2016 ==
: CADded LM8UU standard linear bearings into D3D Printer (see repo).
: Meeting on kit selection [https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/edit#slide=id.p Kit considerations]
: [[Prusa i3 Development]]
: [[3D Printer Kit for Workshop Research]]
: [[3D Printer Hot End Research]]

== Jan 17, 2016 ==
: [[D3D Thesis#Workshop Reproducibility]], some reserve plans created in [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project]

== Jan 13, 2016 ==
: Wrote [[D3D Thesis Project Plan]], sent to examiner.
: More insights on lead screws on the [http://forums.reprap.org/read.php?14,607341,607483 forum thread].
: Verification from [http://www.vermontrapidprototyping.com/3dprinters Vermont Rapid Prototyping] that lead screws used by Trinitylabs lasts for at least 2 years. Put in [[D3D Printer Design Process#Practical viability of lead screws for 3D printing loads and speeds]].

== Jan 12, 2016 ==
: [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path for Thesis Project], embedded in [[D3D Thesis Project Plan]].
: Bought:
:* 3xForce Sensing Resistors (Interlink Electronics FSR 400) for prototyping
:* [https://ultimachine.com/content/rambo-13-complete-kit RAMBO v1.3 for prototyping]
: [[3D Printer Troubleshooting]]

== Jan 11, 2016 ==
: Wrote and published [[D3D Thesis#Team Charter]].
: [[D3D Enterprise Logic Model]]

== Jan 10, 2016 ==
: Some progress on the [http://forums.reprap.org/read.php?14,607341,607483 lead screw forum thread]. Emailed more skillful developers.
: Read up on possible choices for [[D3D Printer Electronics]]. Ordered smooth rods with linear bearings (sizes 8 mmm and 10 mm) for prototyping. Ordered powdered graphite for lubrication testing.

== Jan 9, 2016 ==
: Verification of lead screw: [https://YouTube.com/watch?v=gk9lhcTGSH4 working all-leadscrew 3D printer], [[Stepper Motor#Torque Tests]], [[D3D Printer Design Process#Verification Steps Taken for Lead Screw .2B Stepper Motor Concept]]
: Bought:
:* [http://eBay.com/itm/301833740948?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 1] and
:* [http://www.ebay.com/itm/262200758350?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Lead screw stepper motor 2] for some hands-on testing in February.
: Contacted [http://MooreInternational.co.uk Moore International] and [http://Danish3d.dk Danish 3D] for help with choice and supply of lead screws.
: Discovered [http://Contraptor.org Contraptor] that tries to use the concept of modular linear motion units, put into [[D3D Thesis#Earlier Work]].
: Read up on [[3D Printer Bed Leveling]].
: Summarized state of lead screw discussion in the RepRap community in a [http://forums.reprap.org/read.php?14,607341 forum thread asking for further insights]. Emailed various developers with lead screw designs, asking for experiences, thoughts, insights...
: [[3D Printer Filament Load Sensor]]

== Jan 8, 2016 ==
: Some work on the [[D3D Design Methodology]].
: Some usage of it logged in [[D3D Printer Design Process]].
: Meeting with Marcin, initiated [https://docs.google.com/drawings/d/1wSlnfzftSjfkOlMdXA6-QYl57jqg7d5m88IQpmr567E/edit Critical Path doc].

== Jan 7, 2016 ==
: Checked/commented on lifetimes: [[Stepper Motor#Lifetime]], [[FFF Extruder]], [[Lead Screw]]
: Structuring of 3D printer design work: [[D3D Printer Design Process]], [[D3D Design Methodology]].
: Structured wiki pages such that [[D3D Thesis]] is a sub-project of [[D3D Fusion]]. Changed [[D3D Fusion Project Plan]] to reflect this and initiated [[D3D Thesis Project Plan]].
: The thesis project aims to bootstrap the [[D3D Workshop Kit]].
: Explained structure in [[D3D Fusion#Naming and Links]]

== Jan 6, 2016 ==
: Meeting with Andreas S, [https://docs.google.com/spreadsheets/d/1-NuTg0c_uta0i3vNUZtciD3cq6j1bS4RKWCIG8AOaR0/edit#gid=0 Work Breakdown Structure], [https://docs.google.com/presentation/d/1CrmuvgX19dYkeBbUlYqTmXBTjc8wqiDNU7MEwVNuTsg/edit#slide=id.geb160911a_2_25 D3D Team Project Charter].
: Meeting with Marcin [https://docs.google.com/presentation/d/1jXC3V40cHqc2P8Oo-G2Z1G7IyytujYb4R3rIT9nZCpI/edit#slide=id.g8184a0e10_0_101 Long term Distributive Enterprise Milestones]
: Wrote something on [[D3D Fusion thesis#Funding Mechanisms for Open Source Work]]

== Jan 5, 2016 ==
: [[D3D Fusion Printer Conceptual Design]]

== Jan 4, 2016 ==
: Wrote some [https://Overleaf.com/read/vmpdtnzsgdgg Project Plan stuff on Overleaf]. 3h meeting with Marcin. Finished [https://docs.google.com/document/d/1sQKi3QuQ1yPu_08zyo1cLMhrQGytiTHL4Mfd7JMUK2M/edit?ts=568a0631 OSE NEGOTIATION INVITATION].

== Jan 3, 2016 ==
: Defined moving part of D3D Printer's linear actuator. Reorganized code and wrote README (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Jan 2, 2016 ==
: Added [[D3D Fusion printer design#Weight calculation for steel sheet frame]] and [[D3D Fusion printer design#Motor placement]] to wiki. Two minor commits in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 31, 2015 ==
: Re-organized [[D3D Requirements]]. Some progress on [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 30, 2015 ==
: Meeting with Marcin. Started [https://docs.google.com/presentation/d/18lZ-c7xICEuWqdkpj-hTEY5QemeCp4e1U80k2w5bYFw/edit?pref=2&pli=1#slide=id.p Tech Tree of Choices for D3D Printer].

== Dec 28, 2015 ==
: Reworked l_plate and basic frame (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 27, 2015 ==
: First rough visualization of D3D Fusion Printer done (see [https://github.com/tobbelobb/D3D_Printer Github repo]).

== Dec 26, 2015 ==
: Meeting with Marcin. Finished [[D3D Requirements]] together.

== Dec 25, 2015 ==
: Some progress in [https://github.com/tobbelobb/D3D_Printer Github repo].

== Dec 25, 2015 ==
: Made [https://github.com/tobbelobb/D3D_Printer Github repo] for D3D Printer OpenSCAD design.

== Dec 23, 2015 ==
: Wrote something on the D3D Printer design. [[D3D Fusion Printer Design]] Needs to be fitted into a template.

== Dec 22, 2015 ==
: Work on visa application process. Skype meeting with Marcin. Discussion points:
:# [[Torbjorn DEF Agreement]]. DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
:# Locking in design requirements - [[D3D Requirements]] - both overall and module by module
:# Defining the 'story' for the thesis. [[D3D Thesis Story]].
:# Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
: Found some data: [https://www.3dhubs.com/trends]
: Nice discussion on hangout, got some text produced from it: [https://docs.google.com/document/d/1Ber5iA-2V7m_3mbh54ZsuRB-viTLd-sfb9GL3jj58GQ/edit?ts=5679a219]
: Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: [[Cut_From_Freenode_RepRap_22_Dec]]

== Dec 21, 2015 ==
: Initiated Project Plan [[D3D Fusion project plan]]. This is what Martin must approve before we can move on. Made thesis skeleton [[D3D Fusion thesis#Thesis Skeleton]] from template in course documentation. Limited progress in FreeCAD.

== Dec 19, 2015 ==
: Commented proposed D3D requirements: [[Talk:D3D Requirements]]. Added Lyman extruder to [[Open Source Filament Extruders]]. ''See [[Power Tool Construction Set]].

== Dec 16, 2015 ==
: Presented some 3d printer design ideas in [[D3D Fusion printer design]].

== Dec 15, 2015 ==
: Summarized short research about prior work of Prusa: [[D3D Fusion thesis#Earlier Work]]

== Sun Dec 13, 2015 ==
: Wrote short [[D3D Fusion#Business norms and science norms]] comparison between DE norms and science norms.

== Thu Dec 10, 2015 ==
: Initiated [[D3D Fusion thesis]] sketch. Also did a little overview on [[Large Scale Fused Pellet Fabrication]]. Got an overview of the MOST lab's work. Put in in [[D3D Fusion thesis]].

== Sun Dec 6, 2015 ==
: Initiated this work log. Initiated [[D3D Fusion]]. Initiated D3D dev spreadsheed [https://docs.google.com/spreadsheets/d/1q4Smbyc0_MUNIIFQjmBc1-yq6sgeVxerCedJtWzahdo/edit#gid=1&vpid=A1]. Embedding [[D3D Fusion#Development spreadsheet| Done]]

[[Category:Logs]]