https://wiki.opensourceecology.org/api.php?action=feedcontributions&feedformat=atom&user=Victor+MaculOpen Source Ecology - User contributions [en]2026-04-23T12:36:22ZUser contributionsMediaWiki 1.39.13https://wiki.opensourceecology.org/index.php?title=Composting_Toilet&diff=122997Composting Toilet2014-09-03T15:58:27Z<p>Victor Macul: /* Work Still Needed */</p>
<hr />
<div><br />
{{Category=Soil and compost}}<br />
{{Category=Home fittings}}<br />
<br />
=Current Design, 2014=<br />
<br />
Our design is an above-ground, low-maintenance moldering composting toilet that is intended for large groups (workshop participants, interns) over a short term. The toilet facilitates the decomposition of humanure in an isolated straw-bale chamber. <br />
<br />
It is based on Nancy Rosalie's [http://www.mofga.org/Publications/MaineOrganicFarmerGardener/Fall2009/Thrones/tabid/1255/Default.aspx Common Throne] for the [http://www.mofga.org/theFair Common Ground Fair] in Unity, Maine.<br />
<br />
{| class="wikitable"<br />
|-<br />
|[[File:outhouse_complete_small.jpg|250px]]<br />
|[[File:Composting_Toilet_Sketchup.png|400px]]<br />
|}<br />
[[File:Composting_Toilet.skp]]<br />
<br />
==Trovebox Album==<br />
<br />
[https://opensourceecology.trovebox.com/photos/page-2/album-20/list '''Link to Trovebox Album''']<br />
<br />
[[Image:compostalbum.jpg]]<br />
<br />
==Introduction==<br />
<br />
===What is “humanure”?=== <br />
Humanure (human manure) is human fecal material and urine. It can be a major source of environmental pollution around the world. It also can be a source of disease organisms. When discarded into the environment as a waste material, it creates pollution and threatens public health. When recycled by composting, the pollution and health threats can be eliminated. Humanure contains valuable soil nutrients that enhance plant growth. For these reasons, humanure should be recycled whenever possible.<br />
<br />
===What is composting?===<br />
Composting is the feeding of organic material such as humanure and food scraps to small organisms such as beneficial bacteria. Many compost organisms are too small to be seen, however, many of them can be seen. The larger ones include earthworms and many other tiny insects. Fungi also live in compost piles and they digest the tougher, woody plant materials. <br />
<br />
*Definitions from Joseph Jenkins,[http://weblife.org/humanure/default.html Humanure Handbook])<br />
===How does it work?===<br />
Humanure, when collected and contained in an enclosed environment, and combined with carbon based cover material, goes through a process of aerobic decomposition to create nutrient rich humus. This process destroys pathogens and allows bacteria to thoroughly decompose the refuse material. With the appropriate conditions, with correct air flow, temperature, carbon:nitrogen ratio, the human refuse will aerobically decompose into nutrient rich humus. <br />
<br />
===Why?===<br />
In contemporary society, we have broken the ecology of the human nutrient cycle. Factory farms apply chemical fertilizers to agricultural land, in order to support the vegetation. Consumers then discard refuse and flush away their ‘waste’ to sewers and landfills, sacrificing valuable nutrients and polluting drinking water.<br />
<br />
Open Source Ecology, as an educational hub, has an obligation to demonstrate the possibility of reintegrating ourselves within the environment, starting with the most basic of human functions; eating, digesting, and excreting waste, and transforming our byproducts into valuable resources. The composting toilet is directly in line with the basic mission of OSE, to preserve water and provide soil nourishment, which are essential for the revitalization of the landscape and resilience for the future.<br />
<br />
==Use and Maintenance of Current System==<br />
*Limit liquids and moisture (no urine) in chamber, in order to maintain appropriate moisture content in chamber, and reduce odors<br />
<br />
*After each visit to the toilet, add just enough sawdust to completely cover your contribution <br />
<br />
*Close toilet lid and open stall doors after each use to limit flies and odor<br />
<br />
*Weekly cleaning:<br />
**Clean 5 gallon bucket "poop chutes" - minimize use of water, and only a tiny amount of biodegradable soap (e.g. Dr. Bronners) if necessary<br />
**Sweep out chambers, deck, and stairs<br />
**Restock toilet paper (ideally bleach free)<br />
**Replenish sawdust (from nearby sawmill or our own workshop - NOTE: Clean sawdust only; e.g. NO Hydraulic fluid, NO treated lumber dust, NO pink foam dust)<br />
<br />
*When the chamber is filled to capacity, (determined by users, after the summer season of workshops/interns) the toilet should be closed and left undisturbed for 8 to 12 months. This is when the composting process will occur. <br />
<br />
*After approximately 8 months to 1 year, the back wall of straw-bales is removed and the finished compost is shoveled from the chamber. Composted humus should be ready for laying around trees and ornamental plants; NOT recommended for vegetable gardening. New straw-bales are added as needed, and the process begins again.<br />
<br />
'''*Recommended Fallow Period: October 1st - June 1st''' - this will allow 8 months for composting<br />
<br />
==Work Still Needed==<br />
''In rough priority order''<br />
*Seal, stain, or paint the toilet<br />
**Remove doors and metal hardware<br />
**Paint metal hardware with spraypaint (black?)<br />
**Paint or seal doors, stair treads, and railings. Consider sealing/painting exposed 2x4 wall framing, roof rafters. Especially focus on sealing/painting the end grains of all exposed untreated wood.<br />
**Ask Sutherland's or Menard's what they recommend for deck or shed sealing/painting<br />
**'''DO NOT seal or paint Treated Lumber before 2015 June 1'''. Treated lumber is greenish in hue and includes: stair stringers, ribbon/rim joists, 3/4" deck plywood, 1/2" sheathing plywood. It needs to breath and dry out before it can be safely sealed or painted.<br />
<br />
*Anchor the toilet for wind protection using [http://www.menards.com/main/building-materials/storage-buildings/storage-building-accessories/3-x-30-earth-anchor/p-1349524-c-9565.htm earth anchors] and cables / [http://www.menards.com/main/tools-hardware/household-hardware/utility-hardware/turnbuckles/50-turnbuckle/p-2014919-c-9710.htm turnbuckles].<br />
<br />
*Make good signage, including:<br />
**"CLOSED FOR COMPOSTING. October 1st - June 1st<br />
**Instructions for use<br />
**Instructions for cleaning<br />
**Philosophy & theory of composting toilets<br />
<br />
*Good documentation of build, here on the Wiki or on Dozuki<br />
<br />
*Add 1/4" plywood sides to seatboxes to hide the bucket/"poop chutes"<br />
<br />
----<br />
=== Proposed Timeline ===<br />
<br />
October 1st, 2014: Close toilet for composting.<br />
<br />
June 1st, 2015: Re-open and collect decomposed material with arrival of new interns. Add new straw-bales for chamber as needed.<br />
<br />
<br />
'''Yes compost'''<br />
<br />
feces, urine, menstrual blood<br />
<br />
sawdust<br />
<br />
toilet paper<br />
<br />
toilet paper rolls (cardboard)<br />
<br />
paper or cotton based feminine hygiene products<br />
<br />
'''No compost:'''<br />
<br />
plastics <br />
<br />
plastic feminine hygiene products<br />
<br />
==The Plans==<br />
<br />
===SketchUp===<br />
<br />
[[File:Composting_Toilet.skp]]<br />
<br />
===Dozuki===<br />
[http://opensourceecology.dozuki.com/Guide/How+to+build+and+maintain+a+waterless+above-ground+chamber+Composting+Toilet/175 Dozuki instructionals]<br />
<br />
=Previously Used System, 2012=<br />
<br />
This is the exact technique for a simple composting toilet that we use at Factor e Farm (from a [http://weblife.org/humanure/default.html Humanure Handbook], (see [http://weblife.org/humanure/chapter8_2.html exact page and further pictures]):<br />
<br />
“How it works is a model of simplicity. One begins by depositing one’s organic refuse (feces and urine) into a plastic bucket, clay urn, or other non-corrodible waterproof receptacle with about a five gallon (20 liter) capacity. Food scraps may be collected in a separate receptacle, but can also be deposited into the toilet receptacle. A five gallon capacity is recommended because a larger size would be too heavy to carry when full. If five gallons is still too heavy for someone to carry, it can be emptied when half-full.<br />
<br />
The contents of the toilet are kept covered with a clean, plant-based cover material such as rotted sawdust, peat moss, leaf mould, rice hulls, or grass clippings, in order to prevent odors, absorb urine, and eliminate any fly nuisance. Urine is deposited into the same receptacle, and as the liquid surface rises, more cover material is added so that a clean layer of organic material covers the toilet contents at all times.<br />
<br />
A lid is kept on the toilet receptacle when not in use. The lid need not be air-tight, and a standard, hinged toilet seat is quite suitable. The lid does not necessarily prevent odor from escaping, and it does not necessarily prevent flies from gaining access to the toilet contents. Instead, the cover material does. The cover material acts as an organic lid or a “biofilter”; the physical lid (toilet seat) is used primarily for convenience and aesthetics.”<br />
----<br />
<br />
The idea of a composting toilet is to keep compost around 43-50°C (110-122°F) for at least a week, to create an environment in which beneficial microorganisms thrive and pathogenic ones die. ''The Humanure Handbook'' says, "A sound approach to pathogen destruction when composting humanure is to [[Thermophilic compost|thermophilically compost]] the toilet material, then allow the compost to sit, undisturbed, for a lengthy period of time after the thermophilic heating stage has ended."<br />
<br />
The way to accomplish this is:<br />
* Use sawdust to bury manure. Sawdust provides carbon and this balances the nitrogen in the faeces. A good carbon-nitrogen balance is needed for composting. The sawdust also keeps bad smells in and keeps flies away. [[Biochar]] could also profitably be used for this purpose.<br />
* Do not seperate urine and feces, as the urine provides moisture the microorganisms need.<br />
* As well as adding the buckets from the toilet to the compost heap, throw on chunky materials like straw. This traps air pockets in the compost heap.<br />
* Optionally, skewer the compost heap with sticks or pipes to provide more aeration.<br />
* Let it sit for a year before using on plants<br />
<br />
<br />
==Resources==<br />
*''The Humanure Handbook, 3rd edition'' [http://humanurehandbook.com/contents.html here]<br />
<br />
* [http://www.sunnyjohn.com/toiletpapers2.htm Moldering Toilets]<br />
* Terra Preta Toilet<br />
** [http://www.phlush.org/ecological-sanitation/terra-preta/ 1]<br />
** [http://www.sswm.info/category/implementation-tools/water-use/hardware/toilet-systems/terra-preta-toilet 2]<br />
* [http://teachdemocracy.org/cms/index.php/projects/naturaltoilets/toilet-article/ Natural Toilets]<br />
<br />
*[http://en.howtopedia.org/wiki/How_to_Build_a_Compost_Toilet How-to-guide]<br />
<br />
*[http://www.gytte.org/DCT.htm Dry Composting Toilet]<br />
<br />
*[http://www.cropthornehouse.co.uk/design/ Cropthorne Autonomous House]<br />
<br />
*[http://www.pacificwater.org/userfiles/file/mr0249.pdf Pacific Water Toilet designs]<br />
<br />
*[http://cottagelife.com/files/2011/05/Privy-Plan.pdf composting toilet outhouse plans]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=122028Victor Log2014-08-06T17:14:35Z<p>Victor Macul: </p>
<hr />
<div>== Wed Aug 06, 2014 ==<br />
*[https://docs.google.com/presentation/d/1JLQOey6iK9yrpNfvHOAy9AGvcewm4hbp1XDTExoPHGg/edit#slide=id.p MicroHouse Build Instructions]<br />
<br />
== Fri Aug 01, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-08-01/repomanagementrepo.2014-08-01-17.31.log.html IRC meeting] about RepoManagemen<br />
<br />
== Wed Jul 30, 2014 ==<br />
*Documentation of MicroCar workshop: Building carbon fiber wheels.<br />
<br />
== Wed Jul 30, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-07-30/repomanagement.2014-07-30-18.22.log.html IRC meeting] about RepoManagement<br />
*IRC channel [http://webchat.freenode.net/?channels=opensourceecology #opensourceecology]<br />
<br />
== Tue Jul 29, 2014 ==<br />
*MicroCar inventory<br />
*Milling the molds for the carbon fiber parts<br />
<br />
== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Thurs Jul 17, 2014 ==<br />
*Lounch of PDM improvement project. Create a board in Trello for the [https://trello.com/b/HsddKSNT PDM] project.<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121921Victor Log2014-08-01T18:19:01Z<p>Victor Macul: </p>
<hr />
<div>== Fri Jul 01, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-08-01/repomanagementrepo.2014-08-01-17.31.log.html IRC meeting] about RepoManagemen<br />
<br />
== Wed Jul 30, 2014 ==<br />
*Documentation of MicroCar workshop: Building carbon fiber wheels.<br />
<br />
== Wed Jul 30, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-07-30/repomanagement.2014-07-30-18.22.log.html IRC meeting] about RepoManagement<br />
*IRC channel [http://webchat.freenode.net/?channels=opensourceecology #opensourceecology]<br />
<br />
== Tue Jul 29, 2014 ==<br />
*MicroCar inventory<br />
*Milling the molds for the carbon fiber parts<br />
<br />
== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Thurs Jul 17, 2014 ==<br />
*Lounch of PDM improvement project. Create a board in Trello for the [https://trello.com/b/HsddKSNT PDM] project.<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121920Victor Log2014-08-01T17:43:53Z<p>Victor Macul: </p>
<hr />
<div>== Wed Jul 30, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-07-30/repomanagement.2014-07-30-18.22.log.html IRC meeting] about RepoManagement<br />
*IRC channel [http://webchat.freenode.net/?channels=opensourceecology #opensourceecology]<br />
<br />
== Tue Jul 29, 2014 ==<br />
*MicroCar inventory<br />
*Milling the molds for the carbon fiber parts<br />
<br />
== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Sun Jul 17, 2014 ==<br />
*Lounch of PDM improvement project. Create a board in Trello for the [https://trello.com/b/HsddKSNT PDM] project.<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121919Victor Log2014-08-01T17:32:36Z<p>Victor Macul: </p>
<hr />
<div>== Wed Jul 30, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-07-30/repomanagement.2014-07-30-18.22.log.html IRC meeting] about RepoManagement<br />
*IRC channel [http://webchat.freenode.net/?channels=opensourceecology #opensourceecology]<br />
<br />
== Tue Jul 29, 2014 ==<br />
*MicroCar inventory<br />
*Milling the molds for the carbon fiber parts<br />
<br />
== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Lounch of PDM improvement project. Create a board in Trello for the [https://trello.com/b/HsddKSNT PDM] project.<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121917Victor Log2014-08-01T17:27:42Z<p>Victor Macul: </p>
<hr />
<div>== Wed Jul 30, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-07-30/repomanagement.2014-07-30-18.22.log.html IRC meeting] about RepoManagement<br />
<br />
== Tue Jul 29, 2014 ==<br />
*MicroCar inventory<br />
*Milling the molds for the carbon fiber parts<br />
<br />
== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Sun Jul 3, 2014 ==<br />
Lounch of PDM improvement project. Create a board in Trello for the [https://trello.com/b/HsddKSNT PDM] project.<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121850Victor Log2014-07-30T18:44:15Z<p>Victor Macul: </p>
<hr />
<div>== Wed Jul 30, 2014 ==<br />
* [http://meetbot.fedoraproject.org/opensourceecology/2014-07-30/repomanagement.2014-07-30-18.22.log.html IRC meeting] about RepoManagement<br />
<br />
== Tue Jul 29, 2014 ==<br />
*MicroCar inventory<br />
*Milling the molds for the carbon fiber parts<br />
<br />
== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121822Victor Log2014-07-28T19:47:31Z<p>Victor Macul: /* Mon Jul 28, 2014 */</p>
<hr />
<div>== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 MicroCar Build Instructions]<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121821Victor Log2014-07-28T19:46:16Z<p>Victor Macul: </p>
<hr />
<div>== Mon Jul 28, 2014 ==<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 [MicroCar] OSE BOM]<br />
*Create the [https://docs.google.com/spreadsheets/d/1fvWuT4-mWqZSLr63uyELVjBdHXodnaYO-0dziRCSATA/edit#gid=876780680 [MicroCar] OSE Build Instructions]<br />
<br />
<br />
== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Macul&diff=121748Victor Macul2014-07-23T22:45:08Z<p>Victor Macul: </p>
<hr />
<div>[[File:VictorMacul.jpg|200px|thumb|left|Energy Fair, June 2014]]<br />
<br />
==='''WHO''' are you?===<br />
*Name/Nationality/Ethnicity - Víctor Cussiol Macul, Brazilian<br />
*Location – what is your city and country? - São Carlos / SP / Brasil<br />
*Contact Information – victormacul at gmail dot com, Skype: victor.macul<br />
*Introductory Video- <br />
*Resume/CV – See [http://br.linkedin.com/in/victormacul/ LinkedIn page] <br />
*Hobbies and Pastimes - Gastronomy, surf and drums<br />
<br />
==='''WHY''' are you motivated to support/develop this work?===<br />
*''Do you endorse open source culture?''<br />
For sure! This is the theme of my Master thesis!<br />
<br />
*''Why are you interested in this work?''<br />
In 2012, when I was doing my Bachelor in Industrial Engineering, I saw the OSE TED video for the first time. At that point, I was really interested in the project already. On December 2012 I got the Bachelor degree and on March 2013 I started a Master on product development management at the same university - http://www.eesc.usp.br/portaleesc/en/. Last year, talking about collaborative design with my professors, I showed them Marcian's video and they loved it. <br />
<br />
Since that day my research group (GEI2) started a new line of research in open collaborative design. Until now, a PhD student and myself are working on it. We have been collecting studies in this area and trying to get a better understand of this phenomenon. At the same time, I have been studying the OSE community, through website and wiki.<br />
<br />
I could note that the OSE has been working to improve the development process, and that it is one of the processes of Management support system: the 'System/process Design' one. This is exactly what I want to do in my Master thesis. So, I applied to participate in the 'Summers of Extreme Design/Build' program in 2014 to get a better understand of the OSE development process and community, collect some data, and propose process improvements.<br />
<br />
Beyond to get good results to my thesis, I personally want to get a deeper experience with design and build, to complement my knowledge in the design science. <br />
<br />
*''Are you interested in teaching about the GVCS?''*<br />
Yes.<br />
<br />
*Are you interested in economic relocalization possibilities arising from the GVCS?<br />
Yes.<br />
<br />
*''Do you want to use the GVCS technologies yourself? Do you want to build them yourself?''<br />
Yes, I'd like to help in the development of these technologies and build some of them by myself.<br />
<br />
*''Are you interested in starting up enterprise using the GVCS technologies? Are you interested in having the GVCS technologies fabricated by your local custom fabricator?''<br />
Yes, I would like to start a business using these technologies in Brasil.<br />
<br />
*''Are you interested in applying the GVCS to third world development? To redevelopment of crisis areas? To development of derelict areas in the developed world?''<br />
Yes, in Latin America, starting by Brasil.<br />
<br />
*''Are you interested in starting up Industry 2.0 flexible fabrication enterprises for your local community, by drawing from a global repository of freely down-loadable designs and fabricating using open source fabrication equipment?''<br />
Yes.<br />
<br />
*''Are you interested in the potential of the GVCS for developing local food systems?''<br />
At this moment, I'm more interested in the design process than in the agriculture.<br />
<br />
*''Are you interested in doing academic studies/papers, publishing books, or doing other analysis of our efforts?'' <br />
Yes. Actually, I'm already doing it.<br />
<br />
*''Are you interested in financial investment opportunities arising from our work?''<br />
Not now. Probably in the future.<br />
<br />
*''Are you interested in the distributive economic aspects of our work, and if so, how do you see this playing out?''<br />
Yes. I see the open source hardware as an instrument that provides people what they need to improve their lives by themselves.<br />
<br />
*''Are you interested in building renewable energy production facilities based on open hardware (solar concentrator electric, wind, biomass power)? Are you interested in building resilient communities based on access to the GVCS?''<br />
Yes. But I think that I have to get more experience before it.<br />
<br />
<br />
==='''WHAT'''===<br />
*''What have you already contributed to the OSE project? (technical contributions, blogging about us, financial support, organizing events, translations, interviews, video editing, publications, publicity work, behind-the-scenes work, CAD work, wiki contributions, computer support, etc)''<br />
<br />
I'm participating in the 'Summers of Extreme Design/Build' and working to improve the Development Process.<br />
<br />
'''HOW''' can you help?''<br />
<br />
*''How are you interested in contributing to the work of GVCS development?''<br />
By working to improve Development Process, participating in some projects at FeF and workshops, contacting people in Brazil and disseminating the OSE in Brazilian universities.<br />
I already have some experience with Design Thinking, Business Process Management, Project Management (PMBOK and Agile) and Lean Manufacturing. As a research group (GEI2), we have experiences with:<br />
**Sustainable product development; <br />
**Web knowledge sharing (about product development, design and project management); <br />
**Business process management;<br />
**Agile project management;<br />
**Techniques and methods for products developments and its integrated applications;<br />
**Techniques and tools for business process modeling;<br />
**Performance indicator;<br />
**Information systems for project management and for product lifecycle;<br />
<br />
*''Can you volunteer to work with us, and if so, how many hours per week?''<br />
During this summer (2014), I'm working 40 hours per week.<br />
<br />
*''Are you interested in working with us for pay? If so, what services can you offer, and what is your hourly or per-project rate?''<br />
*''Are you interested in purchasing equipment from us to help bootstrap development?''<br />
*''Are you interested in bidding for consulting/design/prototyping work?''<br />
Not right now.<br />
<br />
*''Are you a True Fan? If not, why not?''<br />
No, because now, I'm paying to participate in the 'Summers of Extreme Design/Build', and expenditures on travel and documents to come to USA. After this summer, I have plans to become a True Fan.<br />
<br />
*''Would you like to see yourself working with us on a full-time basis?''<br />
For a while.<br />
<br />
*''Are you interested in using the technologies that we are developing directly?''<br />
Yes.<br />
<br />
[[Category:Brazil]]<br />
[[Category:People]]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=File:VictorMacul.jpg&diff=121747File:VictorMacul.jpg2014-07-23T22:42:41Z<p>Victor Macul: Display of CEB Press at Energy Fair. 2014 June, Wisconsin.</p>
<hr />
<div>Display of CEB Press at Energy Fair. 2014 June, Wisconsin.</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Macul&diff=121746Victor Macul2014-07-23T22:39:02Z<p>Victor Macul: </p>
<hr />
<div>[[File:VictorMacul.jpg|200px|thumb|left|alt text]]<br />
<br />
==='''WHO''' are you?===<br />
*Name/Nationality/Ethnicity - Víctor Cussiol Macul, Brazilian<br />
*Location – what is your city and country? - São Carlos / SP / Brasil<br />
*Contact Information – victormacul at gmail dot com, Skype: victor.macul<br />
*Introductory Video- <br />
*Resume/CV – See [http://br.linkedin.com/in/victormacul/ LinkedIn page] <br />
*Hobbies and Pastimes - Gastronomy, surf and drums<br />
<br />
==='''WHY''' are you motivated to support/develop this work?===<br />
*''Do you endorse open source culture?''<br />
For sure! This is the theme of my Master thesis!<br />
<br />
*''Why are you interested in this work?''<br />
In 2012, when I was doing my Bachelor in Industrial Engineering, I saw the OSE TED video for the first time. At that point, I was really interested in the project already. On December 2012 I got the Bachelor degree and on March 2013 I started a Master on product development management at the same university - http://www.eesc.usp.br/portaleesc/en/. Last year, talking about collaborative design with my professors, I showed them Marcian's video and they loved it. <br />
<br />
Since that day my research group (GEI2) started a new line of research in open collaborative design. Until now, a PhD student and myself are working on it. We have been collecting studies in this area and trying to get a better understand of this phenomenon. At the same time, I have been studying the OSE community, through website and wiki.<br />
<br />
I could note that the OSE has been working to improve the development process, and that it is one of the processes of Management support system: the 'System/process Design' one. This is exactly what I want to do in my Master thesis. So, I applied to participate in the 'Summers of Extreme Design/Build' program in 2014 to get a better understand of the OSE development process and community, collect some data, and propose process improvements.<br />
<br />
Beyond to get good results to my thesis, I personally want to get a deeper experience with design and build, to complement my knowledge in the design science. <br />
<br />
*''Are you interested in teaching about the GVCS?''*<br />
Yes.<br />
<br />
*Are you interested in economic relocalization possibilities arising from the GVCS?<br />
Yes.<br />
<br />
*''Do you want to use the GVCS technologies yourself? Do you want to build them yourself?''<br />
Yes, I'd like to help in the development of these technologies and build some of them by myself.<br />
<br />
*''Are you interested in starting up enterprise using the GVCS technologies? Are you interested in having the GVCS technologies fabricated by your local custom fabricator?''<br />
Yes, I would like to start a business using these technologies in Brasil.<br />
<br />
*''Are you interested in applying the GVCS to third world development? To redevelopment of crisis areas? To development of derelict areas in the developed world?''<br />
Yes, in Latin America, starting by Brasil.<br />
<br />
*''Are you interested in starting up Industry 2.0 flexible fabrication enterprises for your local community, by drawing from a global repository of freely down-loadable designs and fabricating using open source fabrication equipment?''<br />
Yes.<br />
<br />
*''Are you interested in the potential of the GVCS for developing local food systems?''<br />
At this moment, I'm more interested in the design process than in the agriculture.<br />
<br />
*''Are you interested in doing academic studies/papers, publishing books, or doing other analysis of our efforts?'' <br />
Yes. Actually, I'm already doing it.<br />
<br />
*''Are you interested in financial investment opportunities arising from our work?''<br />
Not now. Probably in the future.<br />
<br />
*''Are you interested in the distributive economic aspects of our work, and if so, how do you see this playing out?''<br />
Yes. I see the open source hardware as an instrument that provides people what they need to improve their lives by themselves.<br />
<br />
*''Are you interested in building renewable energy production facilities based on open hardware (solar concentrator electric, wind, biomass power)? Are you interested in building resilient communities based on access to the GVCS?''<br />
Yes. But I think that I have to get more experience before it.<br />
<br />
<br />
==='''WHAT'''===<br />
*''What have you already contributed to the OSE project? (technical contributions, blogging about us, financial support, organizing events, translations, interviews, video editing, publications, publicity work, behind-the-scenes work, CAD work, wiki contributions, computer support, etc)''<br />
<br />
I'm participating in the 'Summers of Extreme Design/Build' and working to improve the Development Process.<br />
<br />
'''HOW''' can you help?''<br />
<br />
*''How are you interested in contributing to the work of GVCS development?''<br />
By working to improve Development Process, participating in some projects at FeF and workshops, contacting people in Brazil and disseminating the OSE in Brazilian universities.<br />
I already have some experience with Design Thinking, Business Process Management, Project Management (PMBOK and Agile) and Lean Manufacturing. As a research group (GEI2), we have experiences with:<br />
**Sustainable product development; <br />
**Web knowledge sharing (about product development, design and project management); <br />
**Business process management;<br />
**Agile project management;<br />
**Techniques and methods for products developments and its integrated applications;<br />
**Techniques and tools for business process modeling;<br />
**Performance indicator;<br />
**Information systems for project management and for product lifecycle;<br />
<br />
*''Can you volunteer to work with us, and if so, how many hours per week?''<br />
During this summer (2014), I'm working 40 hours per week.<br />
<br />
*''Are you interested in working with us for pay? If so, what services can you offer, and what is your hourly or per-project rate?''<br />
*''Are you interested in purchasing equipment from us to help bootstrap development?''<br />
*''Are you interested in bidding for consulting/design/prototyping work?''<br />
Not right now.<br />
<br />
*''Are you a True Fan? If not, why not?''<br />
No, because now, I'm paying to participate in the 'Summers of Extreme Design/Build', and expenditures on travel and documents to come to USA. After this summer, I have plans to become a True Fan.<br />
<br />
*''Would you like to see yourself working with us on a full-time basis?''<br />
For a while.<br />
<br />
*''Are you interested in using the technologies that we are developing directly?''<br />
Yes.<br />
<br />
[[Category:Brazil]]<br />
[[Category:People]]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Overall_Machine_-_3D_CAD&diff=121359CEB Press 6 - Overall Machine - 3D CAD2014-07-09T15:34:13Z<p>Victor Macul: </p>
<hr />
<div><br />
*[https://docs.google.com/presentation/d/1zWw7_9LnrQu08-VmUOakxsEVGgxCfGGt9LEeBPx9RTo/edit#slide=id.p Build Instructions]<br />
*'''Current CEB Press in STEP file format''' - see [[CEB Press/Current Downloads]]<br />
*'''NEW Freecad 3d model with proper grouping - July 09, 2014<br />
**'''[[File:CEBPressJuneGroup.fcstd]]<br />
**'''[[fILE:CEBPressViews.cam]]<br />
*Overall machine in FreeCAD - [[File:overallceb6.zip]]<br />
*Overall machien in Sketchup 8 - [[File:ceb6sketchup8.skp]]<br />
:*Overall machien in Sketchup 14 - [[File:ceb6sketchup14.skp]]<br />
*Alibre Design Original File - see [[Rob Beddingfield Log]] and [[CEB Press/Current Downloads]].<br />
*'''See also PDF of fab drawings of all assemblies''' - [[CEB_Press/Current_Downloads]]<br />
*3D Printing files - bushing holders<br />
**[[File:01-222-00-2.STL]] <br />
**[[File:01-238-00-0.STL]]]]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=File:CEBPressViews.cam&diff=121358File:CEBPressViews.cam2014-07-09T15:32:58Z<p>Victor Macul: Its file contain the views for the CAD file used in the Build Instructions presentation.</p>
<hr />
<div>Its file contain the views for the CAD file used in the Build Instructions presentation.</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Overall_Machine_-_3D_CAD&diff=121357CEB Press 6 - Overall Machine - 3D CAD2014-07-09T15:31:24Z<p>Victor Macul: </p>
<hr />
<div><br />
*'''Current CEB Press in STEP file format''' - see [[CEB Press/Current Downloads]]<br />
*'''NEW Freecad 3d model with proper grouping - July 09, 2014<br />
**'''[[File:CEBPressJuneGroup.fcstd]]<br />
**'''[[fILE:CEBPressViews.cam]]<br />
*Overall machine in FreeCAD - [[File:overallceb6.zip]]<br />
*Overall machien in Sketchup 8 - [[File:ceb6sketchup8.skp]]<br />
:*Overall machien in Sketchup 14 - [[File:ceb6sketchup14.skp]]<br />
*Alibre Design Original File - see [[Rob Beddingfield Log]] and [[CEB Press/Current Downloads]].<br />
*'''See also PDF of fab drawings of all assemblies''' - [[CEB_Press/Current_Downloads]]<br />
*3D Printing files - bushing holders<br />
**[[File:01-222-00-2.STL]] <br />
**[[File:01-238-00-0.STL]]]]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=File:CEBPressJuneGroup.fcstd&diff=121356File:CEBPressJuneGroup.fcstd2014-07-09T15:28:55Z<p>Victor Macul: Victor Macul uploaded a new version of &quot;File:CEBPressJuneGroup.fcstd&quot;: I created a group for the pieces of the Frame.</p>
<hr />
<div>The Newest grouped CEB press fcstd</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Overall_Machine_-_3D_CAD&diff=121355CEB Press 6 - Overall Machine - 3D CAD2014-07-09T15:23:48Z<p>Victor Macul: </p>
<hr />
<div><br />
*'''Current CEB Press in STEP file format''' - see [[CEB Press/Current Downloads]]<br />
*'''NEW Freecad 3d model with proper grouping - July 09, 2014<br />
**'''[[File:CEBPressJuneGroup.fcstd]]<br />
*Overall machine in FreeCAD - [[File:overallceb6.zip]]<br />
*Overall machien in Sketchup 8 - [[File:ceb6sketchup8.skp]]<br />
:*Overall machien in Sketchup 14 - [[File:ceb6sketchup14.skp]]<br />
*Alibre Design Original File - see [[Rob Beddingfield Log]] and [[CEB Press/Current Downloads]].<br />
*'''See also PDF of fab drawings of all assemblies''' - [[CEB_Press/Current_Downloads]]<br />
*3D Printing files - bushing holders<br />
**[[File:01-222-00-2.STL]] <br />
**[[File:01-238-00-0.STL]]]]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121323Victor Log2014-07-07T16:08:19Z<p>Victor Macul: /* Sun Jul 3, 2014 */</p>
<hr />
<div>== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop <br />
[[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=File:CEB_Press_Workshop_FeF_2014_July_9th.mpp&diff=121322File:CEB Press Workshop FeF 2014 July 9th.mpp2014-07-07T16:07:25Z<p>Victor Macul: Victor Macul uploaded a new version of &quot;File:CEB Press Workshop FeF 2014 July 9th.mpp&quot;: It is a Project Planning for the CEB Press Workshop realized at the FeF on 2014 July, 9th.
This file contains all deliverables, main activities with work</p>
<hr />
<div>It is a Project Planning for the CEB Press Workshop realized at the FeF on 2014 July, 9th.<br />
This file contains all deliverables, main activities with workload and allocated resources leveled. With this file is possible to generate a Gantt chart and other reports.<br />
To open and edit this file we suggest to use the softwares: MS Project or Project Libre.</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=File:CEB_Press_Workshop_FeF_2014_July_9th.mpp&diff=121321File:CEB Press Workshop FeF 2014 July 9th.mpp2014-07-07T16:05:52Z<p>Victor Macul: It is a Project Planning for the CEB Press Workshop realized at the FeF on 2014 July, 9th.
This file contains all deliverables, main activities with workload and allocated resources leveled. With this file is possible to generate a Gantt chart and othe...</p>
<hr />
<div>It is a Project Planning for the CEB Press Workshop realized at the FeF on 2014 July, 9th.<br />
This file contains all deliverables, main activities with workload and allocated resources leveled. With this file is possible to generate a Gantt chart and other reports.<br />
To open and edit this file we suggest to use the softwares: MS Project or Project Libre.</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121320Victor Log2014-07-07T15:52:41Z<p>Victor Macul: /* Sun Jul 3, 2014 */</p>
<hr />
<div>== Sun Jul 3, 2014 ==<br />
*Finish the project planning for the CEB Press Workshop [[File:CEB Press Workshop_FeF_2014_July_9th.mpp]]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121258Victor Log2014-07-06T20:17:27Z<p>Victor Macul: </p>
<hr />
<div>== Sun Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a [https://docs.google.com/presentation/d/1T6CsU1dcns7yIdnSQ_C9FXNxlier5aItdOYU8wiEHC8/edit#slide=id.g35d55b2b3_2174 template for OSE Build Instructions]<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121256Victor Log2014-07-06T17:26:04Z<p>Victor Macul: </p>
<hr />
<div>== Sun Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
<br />
== Sat Jul 5, 2014 ==<br />
*[http://opensourceecology.org/power-cube-workshop/ Power Cube Workshop]<br />
*[https://docs.google.com/presentation/d/1Vu26RrT3XNG-c59bcJX-QhQwWLGgeYzA6dwsXwhzmdw/edit#slide=id.g35d55b2b3_280 Power Cube Cooler and Fan Module Assembly Instructional]<br />
*Create a template for document the machines assembly process<br />
<br />
== Thurs Jul 3, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Wed Jul 2, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Lean how to use the LifeTrack 4<br />
<br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121107Victor Log2014-07-02T05:19:21Z<p>Victor Macul: </p>
<hr />
<div><br />
== Tue Jul 1, 2014 ==<br />
*Create a project planning for the CEB Press Workshop<br />
*Assemble the tractor weights<br />
<br />
== Mon Jun 30, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
<br />
== Fri Jun 27, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Machine Assembly]<br />
*Build the soffit of Hablab East side<br />
*First meeting of the Design Process Improvement Project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121106Victor Log2014-07-02T04:54:07Z<p>Victor Macul: /* Fri Jun 26, 2014 */</p>
<hr />
<div><br />
== Fri Jun 26, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Assembly]<br />
*Build the soffit of Hablab East side<br />
*Design process improvement project<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121105Victor Log2014-07-02T04:51:54Z<p>Victor Macul: </p>
<hr />
<div><br />
== Fri Jun 26, 2014 ==<br />
*[https://docs.google.com/presentation/d/1dYW0PYnkjAhkADE9b7LPAYrCiWbwotyR3jZS1NvSkpc/edit#slide=id.g356882072_10 CEB Press Overall Assembly]<br />
*Build the soffit of Hablab East side<br />
<br />
== Thurs Jun 26, 2014 ==<br />
*Build the soffit of Hablab North side<br />
<br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab North side<br />
*Updade of my [[Victor_Macul profile]] at OSE wiki<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab West side<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab South side<br />
<html><a href="https://opensourceecology.trovebox.com/p/6qk/token-421c37f66e"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/20140626_144148-15057a_800x800.jpg"><br />
</a></html><br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<html><a href="https://opensourceecology.trovebox.com/p/6gp/token-73b13bc83b"><br />
<img src="http://d1odebs29o9vbg.cloudfront.net/custom/201406/DB9DD3A1-8C53-4491-80CD-FFC20277D3FD-36504c_800x800.jpg"><br />
</a></html><br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=121085Victor Log2014-07-01T15:02:44Z<p>Victor Macul: </p>
<hr />
<div><br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab<br />
*Updade of my personal profile at OSE wiki[[Victor_Macul]]<br />
<br />
== Tue Jun 24, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Build the soffit of Hablab<br />
<br />
== Mon Jun 23, 2014 ==<br />
*[https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199 CEB Press Frame Module Assembly Instructional]<br />
*Weeding<br />
*Build the soffit of Hablab<br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*Test CEB Press with different mix of soil<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at [https://www.midwestrenew.org/energyfair The Energy Fair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
*[https://opensourceecology.trovebox.com/photos/page-1/album-1e/list Modules integration]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]''' <br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at [http://www.mstc.edu/ MSTC]'''<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*[https://opensourceecology.trovebox.com/photos/album-1g/list CEB Press Frame Module Assembly]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120951Victor Log2014-06-26T06:53:41Z<p>Victor Macul: </p>
<hr />
<div><br />
== Wed Jun 25, 2014 ==<br />
*Build the soffit of Hablab<br />
*Updade of my personal profile at OSE wiki[[Victor_Macul]]<br />
<br />
== Tue Jun 24, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Build the soffit of Hablab<br />
<br />
== Mon Jun 23, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Weeding<br />
*Build the soffit of Hablab<br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*Test CEB Press with different mix of soil<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
*Modules integration [https://opensourceecology.trovebox.com/photos/page-1/album-1e/list]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Macul&diff=120950Victor Macul2014-06-26T06:48:54Z<p>Victor Macul: </p>
<hr />
<div>[[Image:victormacul.png]]<br />
<br />
==='''WHO''' are you?===<br />
*Name/Nationality/Ethnicity - Víctor Cussiol Macul, Brazilian<br />
*Location – what is your city and country? - São Carlos / SP / Brasil<br />
*Contact Information – victormacul at gmail dot com, Skype: victor.macul<br />
*Introductory Video- <br />
*Resume/CV – See [http://br.linkedin.com/in/victormacul/ LinkedIn page] <br />
*Hobbies and Pastimes - Gastronomy, surf and drums<br />
<br />
==='''WHY''' are you motivated to support/develop this work?===<br />
*''Do you endorse open source culture?''<br />
For sure! This is the theme of my Master thesis!<br />
<br />
*''Why are you interested in this work?''<br />
In 2012, when I was doing my Bachelor in Industrial Engineering, I saw the OSE TED video for the first time. At that point, I was really interested in the project already. On December 2012 I got the Bachelor degree and on March 2013 I started a Master on product development management at the same university - http://www.eesc.usp.br/portaleesc/en/. Last year, talking about collaborative design with my professors, I showed them Marcian's video and they loved it. <br />
<br />
Since that day my research group (GEI2) started a new line of research in open collaborative design. Until now, a PhD student and myself are working on it. We have been collecting studies in this area and trying to get a better understand of this phenomenon. At the same time, I have been studying the OSE community, through website and wiki.<br />
<br />
I could note that the OSE has been working to improve the development process, and that it is one of the processes of Management support system: the 'System/process Design' one. This is exactly what I want to do in my Master thesis. So, I applied to participate in the 'Summers of Extreme Design/Build' program in 2014 to get a better understand of the OSE development process and community, collect some data, and propose process improvements.<br />
<br />
Beyond to get good results to my thesis, I personally want to get a deeper experience with design and build, to complement my knowledge in the design science. <br />
<br />
*''Are you interested in teaching about the GVCS?''*<br />
Yes.<br />
<br />
*Are you interested in economic relocalization possibilities arising from the GVCS?<br />
Yes.<br />
<br />
*''Do you want to use the GVCS technologies yourself? Do you want to build them yourself?''<br />
Yes, I'd like to help in the development of these technologies and build some of them by myself.<br />
<br />
*''Are you interested in starting up enterprise using the GVCS technologies? Are you interested in having the GVCS technologies fabricated by your local custom fabricator?''<br />
Yes, I would like to start a business using these technologies in Brasil.<br />
<br />
*''Are you interested in applying the GVCS to third world development? To redevelopment of crisis areas? To development of derelict areas in the developed world?''<br />
Yes, in Latin America, starting by Brasil.<br />
<br />
*''Are you interested in starting up Industry 2.0 flexible fabrication enterprises for your local community, by drawing from a global repository of freely down-loadable designs and fabricating using open source fabrication equipment?''<br />
Yes.<br />
<br />
*''Are you interested in the potential of the GVCS for developing local food systems?''<br />
At this moment, I'm more interested in the design process than in the agriculture.<br />
<br />
*''Are you interested in doing academic studies/papers, publishing books, or doing other analysis of our efforts?'' <br />
Yes. Actually, I'm already doing it.<br />
<br />
*''Are you interested in financial investment opportunities arising from our work?''<br />
Not now. Probably in the future.<br />
<br />
*''Are you interested in the distributive economic aspects of our work, and if so, how do you see this playing out?''<br />
Yes. I see the open source hardware as an instrument that provides people what they need to improve their lives by themselves.<br />
<br />
*''Are you interested in building renewable energy production facilities based on open hardware (solar concentrator electric, wind, biomass power)? Are you interested in building resilient communities based on access to the GVCS?''<br />
Yes. But I think that I have to get more experience before it.<br />
<br />
<br />
==='''WHAT'''===<br />
*''What have you already contributed to the OSE project? (technical contributions, blogging about us, financial support, organizing events, translations, interviews, video editing, publications, publicity work, behind-the-scenes work, CAD work, wiki contributions, computer support, etc)''<br />
<br />
I'm participating in the 'Summers of Extreme Design/Build' and working to improve the Development Process.<br />
<br />
'''HOW''' can you help?''<br />
<br />
*''How are you interested in contributing to the work of GVCS development?''<br />
By working to improve Development Process, participating in some projects at FeF and workshops, contacting people in Brazil and disseminating the OSE in Brazilian universities.<br />
I already have some experience with Design Thinking, Business Process Management, Project Management (PMBOK and Agile) and Lean Manufacturing. As a research group (GEI2), we have experiences with:<br />
**Sustainable product development; <br />
**Web knowledge sharing (about product development, design and project management); <br />
**Business process management;<br />
**Agile project management;<br />
**Techniques and methods for products developments and its integrated applications;<br />
**Techniques and tools for business process modeling;<br />
**Performance indicator;<br />
**Information systems for project management and for product lifecycle;<br />
<br />
*''Can you volunteer to work with us, and if so, how many hours per week?''<br />
During this summer (2014), I'm working 40 hours per week.<br />
<br />
*''Are you interested in working with us for pay? If so, what services can you offer, and what is your hourly or per-project rate?''<br />
*''Are you interested in purchasing equipment from us to help bootstrap development?''<br />
*''Are you interested in bidding for consulting/design/prototyping work?''<br />
Not right now.<br />
<br />
*''Are you a True Fan? If not, why not?''<br />
No, because now, I'm paying to participate in the 'Summers of Extreme Design/Build', and expenditures on travel and documents to come to USA. After this summer, I have plans to become a True Fan.<br />
<br />
*''Would you like to see yourself working with us on a full-time basis?''<br />
For a while.<br />
<br />
*''Are you interested in using the technologies that we are developing directly?''<br />
Yes.<br />
<br />
[[Category:Brazil]]<br />
[[Category:People]]</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120948Victor Log2014-06-26T05:16:54Z<p>Victor Macul: </p>
<hr />
<div><br />
== Wed Jun 25, 2014 ==<br />
*Building the soffit of Hablab<br />
<br />
== Tue Jun 24, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Building the soffit of Hablab<br />
<br />
== Mon Jun 23, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Weeding<br />
*Building the soffit of Hablab<br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*Test CEB Press with different mix of soil<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
*Modules integration [https://opensourceecology.trovebox.com/photos/page-1/album-1e/list]<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120947Victor Log2014-06-26T05:15:58Z<p>Victor Macul: </p>
<hr />
<div><br />
== Wed Jun 25, 2014 ==<br />
*Building the soffit of Hablab<br />
<br />
<br />
== Tue Jun 24, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Building the soffit of Hablab<br />
<br />
<br />
== Mon Jun 23, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Weeding<br />
*Building the soffit of Hablab<br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*Test CEB Press with different mix of soil<br />
<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
*Modules integration [https://opensourceecology.trovebox.com/photos/page-1/album-1e/list]<br />
<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120946Victor Log2014-06-26T05:15:33Z<p>Victor Macul: </p>
<hr />
<div><br />
== Wed Jun 25, 2014 ==<br />
**Building the soffit of Hablab<br />
<br />
<br />
== Tue Jun 24, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Building the soffit of Hablab<br />
<br />
<br />
== Mon Jun 23, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Weeding<br />
*Building the soffit of Hablab<br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*Test CEB Press with different mix of soil<br />
<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
*Modules integration [https://opensourceecology.trovebox.com/photos/page-1/album-1e/list]<br />
<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120827Victor Log2014-06-25T15:24:07Z<p>Victor Macul: </p>
<hr />
<div><br />
== Tue Jun 24, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Building the soffit of Hablab<br />
<br />
<br />
== Mon Jun 23, 2014 ==<br />
*CEB Press Frame Module Assembly Instructional [https://docs.google.com/presentation/d/1n9-GRTjclrUSEljuYXpZqGnOABEeYL09N1yKtbpbICo/edit#slide=id.g34b05bfb3_0199]<br />
*Weeding<br />
*Building the soffit of Hablab<br />
<br />
== Sun Jun 22, 2014 ==<br />
*Road trip back to FeF<br />
<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*Test CEB Press with different mix of soil<br />
<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
*Modules integration [https://opensourceecology.trovebox.com/photos/page-1/album-1e/list]<br />
<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly [https://opensourceecology.trovebox.com/photos/album-1g/list]<br />
<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
<br />
== Sun Jun 15, 2014 ==<br />
*Painting the CNC Torch Table<br />
<br />
== Sat Jun 14, 2014 ==<br />
*Arrived at Open Source Ecology FeF</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120825Victor Log2014-06-25T15:09:07Z<p>Victor Macul: </p>
<hr />
<div><br />
== Sat Jun 14, 2014 ==<br />
<br />
*Arrived at Open Source Ecology FeF<br />
<br />
<br />
== Mon Jun 16, 2014 ==<br />
*Steel inventory for CEB Press Frame Module<br />
*Road trip to Wisconsin<br />
<br />
<br />
== Tue Jun 17, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Workshop Intro<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly<br />
<br />
<br />
== Wed Jun 18, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*Welding Lesson<br />
*CEB Press Frame Module Assembly <br />
<br />
<br />
== Thurs Jun 19, 2014 ==<br />
'''CEB 6 Workshop 2 at MSTC''' [http://www.mstc.edu/]<br />
*CEB Press Frame Module Assembly<br />
*Modules integration [https://opensourceecology.trovebox.com/photos/page-1/album-1e/list]<br />
<br />
<br />
== Fri Jun 20, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*CEB Press final drawer leveling adjustments<br />
*Fist brick pressed<br />
<br />
<br />
== Sat Jun 21, 2014 ==<br />
*Display at The Energy Fair [https://www.midwestrenew.org/energyfair]<br />
*Test CEB Press with different mix of soil</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Victor_Log&diff=120656Victor Log2014-06-18T14:52:11Z<p>Victor Macul: Created page with " == Sat Jun 14, 2014 == *Arrived at Open Source Ecology"</p>
<hr />
<div><br />
== Sat Jun 14, 2014 ==<br />
<br />
*Arrived at Open Source Ecology</div>Victor Maculhttps://wiki.opensourceecology.org/index.php?title=Subject_Matter_Experts&diff=118437Subject Matter Experts2014-04-10T19:18:06Z<p>Victor Macul: </p>
<hr />
<div>==Overview==<br />
Subject Matter Experts are a critical player in the rapid deployment of the [[GVCS]].<br />
<br />
If you are an expert in any of the below, please [[Contact Us]] with your area of expertise, and what contribution of information/design you are willing to make.<br />
<br />
==Subject Matter Experts==<br />
Experts are needed primarily in mechanical engineering, power electronics, machine design, metallurgy, precision machining, and others:<br />
<br />
#Induction furnace circuitry<br />
#Polymer chemistry for bio-plastic production<br />
#Automotive engineers for open source car and truck design<br />
#Scalable, 3-6 axis, open source stepper motor controller (running open source code) for applications in all types of CNC machines<br />
#Flash steam generator design<br />
#Flash steam generator fabrication<br />
#CNC fabrication of hydraulic motors<br />
#Fabrication of hydraulic cylinders<br />
#Hot rolling of metal<br />
#Pelletizer fabrication<br />
#Agricultural combine design<br />
#Freeze-drying machine for fruit powders<br />
#Fabrication of steam engines<br />
#Solenoid valve design and fabrication<br />
#[http://www.utterpower.com/ST.htm ST Electrical generator] design and fabrication<br />
#Induction furnace chamber design<br />
#Electronic charge controller for batteries<br />
#Solid State inverter circuit design<br />
#Hardened metal steel blade fabrication (applications: metal shears, 150 tons for 1" metal shearing)<br />
#Deep drilling well design<br />
#DC electrical motor design<br />
#DC electrical generator design<br />
#6 axis robotic arm design<br />
#Moldless casting process design<br />
#Continuous casting process design<br />
#Solar concentrator technology design for electrical generation<br />
#Pellet biomass burners and gasifiers design<br />
#Industrial laser design (of the laser itself)<br />
#Industrial CNC laser design (of the CNC device that operates with a laser)<br />
#Gear rack and gear fabrication process design<br />
#Ball screw fabrication<br />
#High torque CNC bed fabrication for millings/drilling/lathing<br />
#Stepper motor design and fabrication<br />
#CNC circuit mill design for milling of circuits from copper-clad board<br />
#Welder power supply design<br />
#Plasma cutter power supply design<br />
#Electric motor design and fabrication<br />
#Metal alloying, hardening, and hot-treatment<br />
<br />
'''Technical Review'''<br />
*''(merge with above)''<br />
<br />
#Professional mechanical engineers, especially in mechanical design<br />
#Precision machining professionals<br />
#Professional electrical engineers, especially in power electronics<br />
#Induction furnace circuitry -<br />
#Scalable, 3-6 axis, open source stepper motor controller (running open source code) for applications in all types of CNC machines<br />
#Flash steam generato<br />
#Hydraulic motor design and fabrication<br />
#Hot rolling of metal<br />
#Pelletizer design and fabrication<br />
#Agricultural combine design<br />
#Freeze-drying machine for fruit powders<br />
#Steam engine design and fabrication - [[Karl Petersen]], [[Harry Schoell]]<br />
#Solenoid valve design and fabrication - <br />
#[http://www.utterpower.com/ST.htm ST Electrical generator] design and fabrication<br />
#Induction furnace chamber design<br />
#Electronic charge controller for batteries<br />
#Solid State inverter circuit design<br />
#Hardened metal steel blade fabrication (applications: metal shears, 150 tons for 1" metal shearing)<br />
#Deep drilling well design<br />
#DC electrical motor design<br />
#DC electrical generator design<br />
#6 axis robotic arm design<br />
#Moldless casting process design<br />
#Continuous casting process design<br />
#Solar concentrator technology design for electrical generation<br />
#Pellet biomass burners and gasifiers design<br />
#Industrial laser design (of the laser itself)<br />
#Industrial CNC laser design (ofthe CNC device that operates with a laser)<br />
#Gear rack and gear fabrication process design<br />
#Ball screw fabrication<br />
#High torque CNC bed fabrication for millings/drilling/lathing<br />
#Stepper motor design and fabrication<br />
#CNC circuit mill design for milling of circuits from copper-clad board<br />
#Welder power supply design<br />
#Plasma cutter power supply design<br />
#Electric motor design and fabrication<br />
#Metal alloying, hardening, and hot-treatment<br />
<br />
==People==<br />
<br />
*[[Judith Katz]] – Resource Development Consultant<br />
*[[Carolyn Scott]] - Resource Development<br />
*[[Masood Akhtar]] - former director of the Wisconsin Center for Technology Transfer<br />
*[[Erik Hoffman]] - PR<br />
<br />
==See Also==<br />
*[http://blog.opensourceecology.org/2010/08/organizational-development/ Development Blog Post]<br />
*[[Development]]<br />
*[[GVCS]]<br />
*[[GVCS Rollout]]<br />
<br />
<br />
[[Category:Collaborators]]</div>Victor Macul