April 2011 Production Run Bolts BOM - Revision history

Marcin: /* Soil Pulverizer */

2011-05-02T08:13:09Z

Soil Pulverizer

← Older revision		Revision as of 08:13, 2 May 2011
Line 62:		Line 62:

	[[Category:LifeTrac III]]		[[Category:LifeTrac III]]
			[[Category:April 2011 Production Run]]

Marcin at 23:39, 30 April 2011

2011-04-30T23:39:22Z

← Older revision		Revision as of 23:39, 30 April 2011
Line 42:		Line 42:
	*<span style="color:green">[32] 9/16" nylon lock nuts		*<span style="color:green">[32] 9/16" nylon lock nuts

	=CEB Press Bolts=		=CEB Press Bolts (x1)=

	*~~Frame:~~ [16] 1/2"x1.5" bolts, ~~with~~ lock washers ~~and nuts~~		*[32] 1/2"x1.5" bolts, [32] nuts, [32] washers
			*[10] 1/2"x3" bolts, [10] nuts, [10] washers
			*[32] 3/4"x1.5" bolts, [32] nuts
			*[4] 12mmx50mm bolts, [12] nuts, [16] washers, [8] lock washers

			*<span style="color:green">Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
			*<span style="color:green">Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
	*Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts		*<span style="color:green">Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor
	*Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
	*Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

	=Soil Pulverizer=		=Soil Pulverizer=

	1.5x½ stubs – 3 with washers for hinges		*1.5x½ stubs – 3 with washers for hinges
	[2]1"x3”, 2 metal lock nuts 2 nuts		*[2]1"x3”, 2 metal lock nuts 2 nuts
	[8] 1.5"x1/2” short bolt adjusters, [8] nuts		*[8] 1.5"x1/2” short bolt adjusters, [8] nuts
	[2] 5” x 3/4", washer + metal locknut		*[2] 5” x 3/4", washer + metal locknut
	[8] 2"x5/8” bolts + [8] metal locknuts		*[8] 2"x5/8” bolts + [8] metal locknuts

	[[Category:LifeTrac III]]		[[Category:LifeTrac III]]

Marcin: /* CEB Press Bolts */

2011-04-30T23:17:39Z

CEB Press Bolts

@@ Line 44: / Line 44: @@
 =CEB Press Bolts=
 *Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
 *Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
 *Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
 *Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

Marcin at 23:15, 30 April 2011

2011-04-30T23:15:02Z

← Older revision		Revision as of 23:15, 30 April 2011
Line 41:		Line 41:
	*<span style="color:green">[32] 9/16" washers		*<span style="color:green">[32] 9/16" washers
	*<span style="color:green">[32] 9/16" nylon lock nuts		*<span style="color:green">[32] 9/16" nylon lock nuts

	~~[[File:Example.jpg]]~~

	=CEB Press Bolts=		=CEB Press Bolts=

Marcin: /* Tractor */

2011-04-29T21:21:28Z

Tractor

← Older revision		Revision as of 21:21, 29 April 2011
Line 1:		Line 1:
	=Tractor=		=Tractor (1 tractor)=

	Functionality list:		Functionality list:
Line 18:		Line 18:
	.		.

	TOTALS:		TOTALS (above is checked 4/29/00, totals here are not checked)

	*<span style="color:green">[40] 3/4"x5.5" bolts		*<span style="color:green">[40] 3/4"x5.5" bolts
Line 41:		Line 41:
	*<span style="color:green">[32] 9/16" washers		*<span style="color:green">[32] 9/16" washers
	*<span style="color:green">[32] 9/16" nylon lock nuts		*<span style="color:green">[32] 9/16" nylon lock nuts

			[[File:Example.jpg]]

	=CEB Press Bolts=		=CEB Press Bolts=

Marcin: /* Soil Pulverizer */

2011-04-29T20:55:53Z

Soil Pulverizer

← Older revision		Revision as of 20:55, 29 April 2011
Line 63:		Line 63:

	=Soil Pulverizer=		=Soil Pulverizer=

			1.5x½ stubs – 3 with washers for hinges
			[2]1"x3”, 2 metal lock nuts 2 nuts
			[8] 1.5"x1/2” short bolt adjusters, [8] nuts
			[2] 5” x 3/4", washer + metal locknut
			[8] 2"x5/8” bolts + [8] metal locknuts

	[[Category:LifeTrac III]]		[[Category:LifeTrac III]]

Marcin at 20:53, 29 April 2011

2011-04-29T20:53:22Z

← Older revision		Revision as of 20:53, 29 April 2011
Line 2:		Line 2:

	Functionality list:		Functionality list:
	*[22] 5"bolts+nuts + [44] washers to suit ~~to attach re-enforcing tubes~~, ~~angle-irons & H/cylinders~~ to ~~L-arms.~~
	*~~<span style="color:green">~~[4] 3/4~~"x4~~.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.		3/4”:
	*~~<span style="color:green">~~[40] ~~3/4x5~~-1/2", with [40] washers for one side and [40] metal lock nuts ~~for the other side~~. For wheel plates & cylinder plates.
	*~~<span style="color:green">~~[42] 3/4"x9" bolts, [80] washers, and [40] metal lock nuts. This is for the assembly of the main frame.		*[14] 5"bolts+[14] nuts + [44] washers to suit front loader
	*~~<span style="color:green">~~[16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. <span style="color:blue"> Equivalent to 32" of threaded rod.		*[8] 4.5” bolts + [8] nuts bolts if available, if not, add to above
	*~~<span style="color:green">~~[8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame.		*[4] 4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
	*~~<span style="color:green">~~[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.		*[32] 5-1/2", with [32] washers for one side and [32] metal lock nuts. For wheel plates & cylinder plates.
	*~~<span style="color:green">~~[32] 9/16"x2" ~~fine thread~~ bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers.		*[42] 3/4"x9" bolts, [84] washers, and [42] metal lock nuts. This is for the assembly of the main frame.
			*[16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. <span style="color:blue"> Equivalent to 32" of threaded rod.
			*[8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame,
			*[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
			*[32] 9/16"x1.5" bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers. (2” will do if no 1.5)
			*[6] 5.5” for power cube mounts, [6] metal lock, [6] washers
			*[2] 5”x1/2” for valve mounts [2]nuts and [2] washers
			.

	TOTALS:		TOTALS:

Marcin: /* CEB Press Bolts */

2011-04-29T07:20:42Z

CEB Press Bolts

Marcin: /* CEB Press */

2011-04-29T07:20:08Z

CEB Press

@@ Line 35: / Line 35: @@
 *<span style="color:green">[32] 9/16" nylon lock nuts
-=CEB Press=
+=CEB Press Bolts=
 =Soil Pulverizer=
 [[Category:LifeTrac III]]

Marcin: /* Tractor */

2011-04-29T06:46:34Z

Tractor

← Older revision		Revision as of 06:46, 29 April 2011
Line 3:		Line 3:
	Functionality list:		Functionality list:
	*[22] 5"bolts+nuts + [44] washers to suit to attach re-enforcing tubes, angle-irons & H/cylinders to L-arms.		*[22] 5"bolts+nuts + [44] washers to suit to attach re-enforcing tubes, angle-irons & H/cylinders to L-arms.
			*<span style="color:green">[4] 3/4"x4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
	*<span style="color:green">[40] 3/4x5-1/2", with [40] washers for one side and [40] metal lock nuts for the other side. For wheel plates & cylinder plates.		*<span style="color:green">[40] 3/4x5-1/2", with [40] washers for one side and [40] metal lock nuts for the other side. For wheel plates & cylinder plates.
	*<span style="color:green">[42] 3/4"x9" bolts, [80] washers, and [40] metal lock nuts. This is for the assembly of the main frame.		*<span style="color:green">[42] 3/4"x9" bolts, [80] washers, and [40] metal lock nuts. This is for the assembly of the main frame.
Line 9:		Line 10:
	*<span style="color:green">[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.		*<span style="color:green">[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
	*<span style="color:green">[32] 9/16"x2" fine thread bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers.		*<span style="color:green">[32] 9/16"x2" fine thread bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers.
	*<span style="color:green">[4] 3/4"x4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.

	TOTALS:		TOTALS:

← Older revision		Revision as of 07:20, 29 April 2011
Line 37:		Line 37:
	=CEB Press Bolts=		=CEB Press Bolts=

	* Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts		*Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts
	* Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts		*Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
	* Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts		*Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
	* Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts		*Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
	* Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.		*Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
	* Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts		*Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts
	* Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)		*Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
	* Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.		*Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.
	* Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts;		*Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts;
	* Roller guides - [2] 1/2"x2" with [2] nylon lock nuts		*Roller guides - [2] 1/2"x2" with [2] nylon lock nuts
	* Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.		*Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.
	* 8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts		*8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts
	* Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers		*Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers
	* Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer		*Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer
	* Grate mounting:		*Grate mounting:
	* Hopper shaker mounting:		*Hopper shaker mounting:
	* Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor		*Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

	=Soil Pulverizer=		=Soil Pulverizer=

	[[Category:LifeTrac III]]		[[Category:LifeTrac III]]