CEB - Revision history

Marcin: Redirected page to CEB Press

2019-07-13T16:20:10Z

Redirected page to CEB Press

2017-08-22T02:45:18Z

Redirected page to CEB Press v17.08

← Older revision		Revision as of 02:45, 22 August 2017
Line 1:		Line 1:
	~~=Steps=~~		#redirect [[CEB Press v17.08]]

	*Lay small concrete blocks or pads along the exterior perimeter of the building; use waterproof sealing compound to ensure zero water penetration underneath these blocks/pads

	*Ready the dirt site for loading desirable dirt by clearing away the topsoil.

	*Position the CEB Press such that its output can be carried by rollers to the area where the next wall will be constructed.

	*Start mixing batches of slurry to be used for adhering the CEBs together.

	*Operate the CEB Press, loading and unloading dirt into its hopper.

	*Apply slurry at the top face of the existing CEB wall (if none, apply on the concrete); also slurry side faces on the existing wall that can be contacted by the next block to be laid.

	*Lay a block on the slurried surface and position it evenly with contact on the slurried side face. Ensure that the wall is flush with the exterior perimeter of the building. Lips will invite standing water that decimates the base of CEB walls.

	*Keep operating the CEB Press, mixing batches of slurry, and laying blocks until the wall is complete.

	*Reposition the CEB Press ~~for further wall construction.~~

	*Rework the dirt extraction site if the piles of usable dirt are dwindling.

	*Optionally insert hay and borax into gaps between CEB walls for superior insulation properties while preventing insect growth.

2012-06-11T05:20:17Z

Steps

← Older revision		Revision as of 05:20, 11 June 2012
Line 20:		Line 20:

	*Rework the dirt extraction site if the piles of usable dirt are dwindling.		*Rework the dirt extraction site if the piles of usable dirt are dwindling.

			*Optionally insert hay and borax into gaps between CEB walls for superior insulation properties while preventing insect growth.

2012-06-11T05:18:08Z

Steps

← Older revision		Revision as of 05:18, 11 June 2012
Line 13:		Line 13:
	*Apply slurry at the top face of the existing CEB wall (if none, apply on the concrete); also slurry side faces on the existing wall that can be contacted by the next block to be laid.		*Apply slurry at the top face of the existing CEB wall (if none, apply on the concrete); also slurry side faces on the existing wall that can be contacted by the next block to be laid.

	*Lay a block on the slurried surface and position it evenly with contact on the slurried side face.		*Lay a block on the slurried surface and position it evenly with contact on the slurried side face. Ensure that the wall is flush with the exterior perimeter of the building. Lips will invite standing water that decimates the base of CEB walls.

	*Keep operating the CEB Press, mixing batches of slurry, and laying blocks until the wall is complete.		*Keep operating the CEB Press, mixing batches of slurry, and laying blocks until the wall is complete.

2012-06-11T05:15:02Z

← Older revision		Revision as of 05:15, 11 June 2012
Line 1:		Line 1:
	=~~Overview~~=		=Steps=

	~~Compressed earth~~ blocks are		*Lay small concrete blocks or pads along the exterior perimeter of the building; use waterproof sealing compound to ensure zero water penetration underneath these blocks/pads

			*Ready the dirt site for loading desirable dirt by clearing away the topsoil.

			*Position the CEB Press such that its output can be carried by rollers to the area where the next wall will be constructed.

			*Start mixing batches of slurry to be used for adhering the CEBs together.

			*Operate the CEB Press, loading and unloading dirt into its hopper.

			*Apply slurry at the top face of the existing CEB wall (if none, apply on the concrete); also slurry side faces on the existing wall that can be contacted by the next block to be laid.

			*Lay a block on the slurried surface and position it evenly with contact on the slurried side face.

			*Keep operating the CEB Press, mixing batches of slurry, and laying blocks until the wall is complete.

			*Reposition the CEB Press for further wall construction.

			*Rework the dirt extraction site if the piles of usable dirt are dwindling.

2012-06-10T18:58:16Z

2011-07-28T16:01:42Z

Redirected page to CEB Press

← Older revision		Revision as of 16:01, 28 July 2011
Line 1:		Line 1:
	#redirect [[~~Compressed Earth Blocks~~]]		#redirect [[CEB Press]]

2011-07-28T15:27:23Z

← Older revision		Revision as of 15:27, 28 July 2011
Line 1:		Line 1:
	#redirect [[~~:Category:CEB~~]]		#redirect [[Compressed Earth Blocks]]

2011-03-23T21:13:09Z

Fixed double redirect

2009-05-20T02:19:01Z

Redirected page to CEB Press

New page

#redirect [[CEB Press]]