CEB Press/Manufacturing Instructions/Leg Holders - Revision history

YK at 00:39, 23 December 2011

2011-12-23T00:39:28Z

← Older revision		Revision as of 00:39, 23 December 2011
Line 1:		Line 1:
	~~{{Template:CEB Press Manufacturing Instructions Navbox}}~~


	[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)		[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]

	<html><iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=9ede5ca4cc4cd2301211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe></html>		<html><iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=9ede5ca4cc4cd2301211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe></html>

	==Tools ~~Required:=~~=		=Tools=

	*Torch		*Torch

	*Welder		*Welder

	*Grinder		*Grinder

	==Materials ~~Required=~~=		=Materials=
	*2 1/2” x 2 1/2" x 3/16" thick square steel tubing – 6” long ~~(14)~~
	*3/4” nut ~~(14)~~		*2 1/2” x 2 1/2" x 3/16" thick square steel tubing – 6” long
	*3/4” x 1.5” bolt (14)
			*3/4”-10 nut

			*3/4”-10 x 1.5” bolt

			=Steps=

			Note: It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on (14 leg holders required per CEB Press).

			*Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.

			*It's not crucial that the hole be centered. It just needs to be somewhere close to the center.

			*Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.

	~~==Fabrication Instructions==~~		*Thread the bolt into the nut.
	~~It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on.~~
	~~#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.~~
	#*~~It's not crucial that the hole be centered. It just needs to be somewhere close to the center.~~
	~~#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.~~
	#Thread the bolt into the nut.

Bkufa: /* Fabrication Instructions */

2011-12-12T22:37:06Z

Fabrication Instructions

← Older revision		Revision as of 22:37, 12 December 2011
Line 18:		Line 18:
	It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on.		It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on.
	#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.		#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.
	#*It's not crucial that the hole be centered. ~~Just as long as it's approximate~~.		#*It's not crucial that the hole be centered. It just needs to be somewhere close to the center.
	#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.		#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
	#Thread the bolt into the nut.		#Thread the bolt into the nut.

Bkufa: /* Fabrication Instructions */

2011-12-12T22:36:36Z

Fabrication Instructions

← Older revision		Revision as of 22:36, 12 December 2011
Line 17:		Line 17:
	==Fabrication Instructions==		==Fabrication Instructions==
	It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on.		It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on.
	#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.		#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.
			#*It's not crucial that the hole be centered. Just as long as it's approximate.
	#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.		#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
	#Thread the bolt into the nut.		#Thread the bolt into the nut.

Bkufa: /* Fabrication Instructions: */

2011-12-12T17:17:54Z

Fabrication Instructions:

← Older revision		Revision as of 17:17, 12 December 2011
Line 15:		Line 15:
	*3/4” x 1.5” bolt (14)		*3/4” x 1.5” bolt (14)

	==Fabrication Instructions:==		==Fabrication Instructions==
			It's suggested you prepare all leg holders at once, doing each step for all leg holders before moving on.
	#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.		#Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.
	#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.		#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
	#Thread the bolt into the nut.		#Thread the bolt into the nut.

Bkufa: /* Materials Required: */

2011-12-12T17:15:31Z

Materials Required:

← Older revision		Revision as of 17:15, 12 December 2011
Line 10:		Line 10:
	*Grinder		*Grinder

	==Materials Required:==		==Materials Required==
	*2 1/2” x 2 1/2" x 3/16" thick square steel tubing – 6” long (1)		*2 1/2” x 2 1/2" x 3/16" thick square steel tubing – 6” long (14)
	*3/4” nut (1)		*3/4” nut (14)
	*3/4” x 1.5” bolt (1)		*3/4” x 1.5” bolt (14)

	==Fabrication Instructions:==		==Fabrication Instructions:==

Bkufa at 17:14, 12 December 2011

2011-12-12T17:14:47Z

← Older revision		Revision as of 17:14, 12 December 2011
Line 1:		Line 1:
	{{Template:CEB Press Manufacturing Instructions Navbox}}		{{Template:CEB Press Manufacturing Instructions Navbox}}
	{{Warning\|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]]. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}}

	[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)		[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)
			<html><iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=9ede5ca4cc4cd2301211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe></html>

	==Tools Required:==		==Tools Required:==

Bkufa: /* Materials Required: */

2011-10-19T04:06:39Z

Materials Required:

← Older revision		Revision as of 04:06, 19 October 2011
Line 10:		Line 10:

	==Materials Required:==		==Materials Required:==
	*2 1/2” x 2 1/2" x 3/16" square steel tubing – 6” long (1)		*2 1/2” x 2 1/2" x 3/16" thick square steel tubing – 6” long (1)
	*3/4” nut (1)		*3/4” nut (1)
	*3/4” x 2” bolt (1)		*3/4” x 1.5” bolt (1)

	==Fabrication Instructions:==		==Fabrication Instructions:==

Howard V. Agnew: +warning

2011-09-24T01:48:29Z

+warning

← Older revision		Revision as of 01:48, 24 September 2011
Line 1:		Line 1:
	{{Template:CEB Press Manufacturing Instructions Navbox}}		{{Template:CEB Press Manufacturing Instructions Navbox}}
			{{Warning\|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete. For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]]. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}}

	[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)		[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)

Ryan Lutz: /* Tools Required: */

2011-08-23T01:39:19Z

Tools Required:

← Older revision		Revision as of 01:39, 23 August 2011
Line 5:		Line 5:
	*Torch		*Torch
	*Welder		*Welder
			*Grinder

	==Materials Required:==		==Materials Required:==

Bkufa at 01:18, 23 August 2011

2011-08-23T01:18:16Z

← Older revision		Revision as of 01:18, 23 August 2011
Line 1:		Line 1:
	{{Template:CEB Press Manufacturing Instructions Navbox}}		{{Template:CEB Press Manufacturing Instructions Navbox}}
	[[Image:legholders.jpg\|thumb\|right\|400px]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)		[[Image:legholders.jpg\|thumb\|right\|400px\| The fabrication steps of the leg holders]]You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary\|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet\|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder\|Frame with main cylinder]] (2)

	==Tools Required:==		==Tools Required:==