CEB pressure - Revision history

John S: correct spelling of strength

2015-03-05T20:41:13Z

correct spelling of strength

← Older revision		Revision as of 20:41, 5 March 2015
Line 13:		Line 13:
	[[The Liberator]] 1 featured an operating hydraulic pressure of 2200 psi. We use a 5 inch hydraulic cylinder, or 43,000 pounds of pressure - or about 20 tons.		[[The Liberator]] 1 featured an operating hydraulic pressure of 2200 psi. We use a 5 inch hydraulic cylinder, or 43,000 pounds of pressure - or about 20 tons.
	*This gives a force of 600 psi on the face of the brick.		*This gives a force of 600 psi on the face of the brick.
	*The compressive ~~streght~~ of a brick is another issue. This must be measured by applying pressure to an unconfined brick.		*The compressive strenght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.
	The [[CEB Prototype 2]] will feature a working hydrualic pressure of 2500 psi with a 5 inch cylinder.		The [[CEB Prototype 2]] will feature a working hydrualic pressure of 2500 psi with a 5 inch cylinder.
	*This is 49,000 pounds of force, or 680 psi on the face of the brick		*This is 49,000 pounds of force, or 680 psi on the face of the brick

WikiSysop: /* The Liberator */

2009-04-14T22:27:25Z

The Liberator

← Older revision		Revision as of 22:27, 14 April 2009
Line 14:		Line 14:
	*This gives a force of 600 psi on the face of the brick.		*This gives a force of 600 psi on the face of the brick.
	*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.		*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.
	The [[CEB Prototype 2]] will feature pressure ~~up to 3000~~ psi.		The [[CEB Prototype 2]] will feature a working hydrualic pressure of 2500 psi with a 5 inch cylinder.
	*This is 59,000 pounds of force, or ~~820~~ psi on the face of the brick		*This is 49,000 pounds of force, or 680 psi on the face of the brick

	==Others==		==Others==

WikiSysop: /* Others */

2009-04-14T21:23:05Z

Others

← Older revision		Revision as of 21:23, 14 April 2009
Line 22:		Line 22:

	*AECT Impact 2001 machine - 1091 psi force on the brick (72000 lb on 5.5x12 inch brick face) - [http://pages.sbcglobal.net/fwehman/Impact2001.html]		*AECT Impact 2001 machine - 1091 psi force on the brick (72000 lb on 5.5x12 inch brick face) - [http://pages.sbcglobal.net/fwehman/Impact2001.html]
			*Auram 3000 - 150 kN (15 metric tons, or 33,000 lb) of pressure on a face of 9.4x9.4 inches, or 373 psi

	=Recommended Pressure=		=Recommended Pressure=

WikiSysop: /* The Liberator */

2009-04-14T20:38:34Z

The Liberator

← Older revision		Revision as of 20:38, 14 April 2009
Line 14:		Line 14:
	*This gives a force of 600 psi on the face of the brick.		*This gives a force of 600 psi on the face of the brick.
	*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.		*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.
	The ~~Liberator~~ 2 ~~prototype~~ will feature pressure up to 3000 psi.		The [[CEB Prototype 2]] will feature pressure up to 3000 psi.
	*This is 59,000 pounds of force, or 820 psi on the face of the brick		*This is 59,000 pounds of force, or 820 psi on the face of the brick

WikiSysop: /* The Liberator */

2009-04-14T20:36:19Z

The Liberator

← Older revision		Revision as of 20:36, 14 April 2009
Line 11:		Line 11:
	==The Liberator==		==The Liberator==

	[[The Liberator]] ~~features~~ an operating hydraulic pressure of 2200 psi. We use a 5 inch hydraulic cylinder, or 43,000 pounds of pressure - or about 20 tons.		[[The Liberator]] 1 featured an operating hydraulic pressure of 2200 psi. We use a 5 inch hydraulic cylinder, or 43,000 pounds of pressure - or about 20 tons.


	*This gives a force of 600 psi on the face of the brick.		*This gives a force of 600 psi on the face of the brick.
	*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.		*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.
			The Liberator 2 prototype will feature pressure up to 3000 psi.
			*This is 59,000 pounds of force, or 820 psi on the face of the brick

	==Others==		==Others==

WikiSysop: /* Others */

2009-04-14T16:22:28Z

Others

← Older revision		Revision as of 16:22, 14 April 2009
Line 20:		Line 20:

	Here are some typical operating pressures found on other machines.		Here are some typical operating pressures found on other machines.

			*AECT Impact 2001 machine - 1091 psi force on the brick (72000 lb on 5.5x12 inch brick face) - [http://pages.sbcglobal.net/fwehman/Impact2001.html]

	=Recommended Pressure=		=Recommended Pressure=

WikiSysop: /* Pressures on Existing Machines */

2009-04-14T16:17:35Z

Pressures on Existing Machines

← Older revision		Revision as of 16:17, 14 April 2009
Line 5:		Line 5:
	=Pressures on Existing Machines=		=Pressures on Existing Machines=

	~~Note that~~ 1 kg/cm2 = 14.2 psi (pounds per square inch) - [http://wiki.answers.com/Q/How_do_you_convert_Kg_cm2_to_psi]		*1 kg/cm2 = 14.2 psi (pounds per square inch) - [http://wiki.answers.com/Q/How_do_you_convert_Kg_cm2_to_psi]
			*ton - A unit of weight (mass) equal to 2240 pounds (a long ton) or 2000 pounds (a short ton) or 1000 kilograms (a metric ton); A unit of volume ... - [en.wiktionary.org/wiki/ton]
			*1 megapascal = 145.0 pound-force/square inch (PSI) - [http://www.onlineconversion.com/pressure.htm]

	Here are some typical operating pressures.		==The Liberator==

			[[The Liberator]] features an operating hydraulic pressure of 2200 psi. We use a 5 inch hydraulic cylinder, or 43,000 pounds of pressure - or about 20 tons.


			*This gives a force of 600 psi on the face of the brick.
			*The compressive streght of a brick is another issue. This must be measured by applying pressure to an unconfined brick.

			==Others==

			Here are some typical operating pressures found on other machines.

	=Recommended Pressure=		=Recommended Pressure=

WikiSysop: /* Pressures on Existing Machines */

2009-04-14T15:57:38Z

Pressures on Existing Machines

← Older revision		Revision as of 15:57, 14 April 2009
Line 5:		Line 5:
	=Pressures on Existing Machines=		=Pressures on Existing Machines=

			Note that 1 kg/cm2 = 14.2 psi (pounds per square inch) - [http://wiki.answers.com/Q/How_do_you_convert_Kg_cm2_to_psi]

	Here are some typical operating pressures.		Here are some typical operating pressures.

WikiSysop: Created page with '=Introduction= This page discusses the pressure requirements for pressing quality bricks with a CEB press. =Pressures on Existing Machines= Here are some typical operating p...'

2009-04-14T15:54:57Z

Created page with '=Introduction= This page discusses the pressure requirements for pressing quality bricks with a CEB press. =Pressures on Existing Machines= Here are some typical operating p...'

New page

=Introduction=

This page discusses the pressure requirements for pressing quality bricks with a CEB press.

=Pressures on Existing Machines=

Here are some typical operating pressures.

=Recommended Pressure=

[[Category:CEB]]