Collaborative Literacy Webinar - Revision history

Marcin at 13:03, 29 October 2018

2018-10-29T13:03:55Z

← Older revision		Revision as of 13:03, 29 October 2018
Line 6:		Line 6:
	<html><iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PL6Jpysxw3Ty--ILAxCWI5DRFFFvH4KzXW" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PL6Jpysxw3Ty--ILAxCWI5DRFFFvH4KzXW" frameborder="0" allowfullscreen></iframe></html>

			=Notes from Above Webinar=
			*Intro - Development milestones of OSE
			*38:16 - collaborative literary

	=Introduction=		=Introduction=

Marcin at 03:43, 2 July 2018

2018-07-02T03:43:34Z

← Older revision		Revision as of 03:43, 2 July 2018
Line 1:		Line 1:
	{{RightTOC}}		{{RightTOC}}
	==Introduction==
			= Collaborative Literacy Webinar =
			See [[Collaborative Literacy Playlist]] on [[YouTube]].

			<html><iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PL6Jpysxw3Ty--ILAxCWI5DRFFFvH4KzXW" frameborder="0" allowfullscreen></iframe></html>



			=Introduction=
	; [[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.		; [[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.

Line 6:		Line 14:

	; The weekly Collaborative Literacy Webinar runs at 8 PM CST USA time every Monday. The format is a Google Hangout on Air, which is recorded online and posted at the corresponding date below, immediately after the webinar becomes available on YouTube. To join the webinar, see below or the [[OSE Facebook Page]] for a link to the Webinar, which will be posted on the day of the webinar.		; The weekly Collaborative Literacy Webinar runs at 8 PM CST USA time every Monday. The format is a Google Hangout on Air, which is recorded online and posted at the corresponding date below, immediately after the webinar becomes available on YouTube. To join the webinar, see below or the [[OSE Facebook Page]] for a link to the Webinar, which will be posted on the day of the webinar.
			= Monday, Mar 7, 2016 =
	== Monday, Mar 7, 2016 ==
	* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	* '''Abstract:''' Third webinar of 2016. Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.		* '''Abstract:''' Third webinar of 2016. Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.
Line 14:		Line 21:
	<html><iframe width="560" height="315" src="https://www.youtube.com/embed/TqVqmr37d4w" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="560" height="315" src="https://www.youtube.com/embed/TqVqmr37d4w" frameborder="0" allowfullscreen></iframe></html>

	== Monday, Feb. 29, 2016 ==		= Monday, Feb. 29, 2016 =
	'''Abstract:''' This is the second webinar of 2016, and you can hear last week's webinar about the [[Roadmap]] below. We will cover [[Viral Replicability Criteria]]. What are Viral Replicability Criteria for an enterprise? How do we motivate a developer community to develop them? Read the latest blog post on the Viral Replicability Criteria - http://bit.ly/1TJbOCY. We will apply the Viral Replicability Criteria to the 3D Printer Workshop Business Plan - http://bit.ly/1TgA3do. We will survey the main needs for succeeding in replicating a 3D Printer Workshop with participants who are interested in replicating the workshop. If you are potentially interested in running 1 day 3D printer builds from scratch - where people take the 3D printer home - we can teach you how to run a workshop, and to develop a source of livelihood. To get started, join this webinar.		'''Abstract:''' This is the second webinar of 2016, and you can hear last week's webinar about the [[Roadmap]] below. We will cover [[Viral Replicability Criteria]]. What are Viral Replicability Criteria for an enterprise? How do we motivate a developer community to develop them? Read the latest blog post on the Viral Replicability Criteria - http://bit.ly/1TJbOCY. We will apply the Viral Replicability Criteria to the 3D Printer Workshop Business Plan - http://bit.ly/1TgA3do. We will survey the main needs for succeeding in replicating a 3D Printer Workshop with participants who are interested in replicating the workshop. If you are potentially interested in running 1 day 3D printer builds from scratch - where people take the 3D printer home - we can teach you how to run a workshop, and to develop a source of livelihood. To get started, join this webinar.

	'''Participants:''' MJ, Jonathan Kocurek, +..... Working doc: [https://docs.google.com/presentation/d/15kcAQryATrafgYRZheFJDqsGqK0s48_42VxNCHdV0sc/edit#slide=id.g84263c56c_9_12]		'''Participants:''' MJ, Jonathan Kocurek, +..... Working doc: [https://docs.google.com/presentation/d/15kcAQryATrafgYRZheFJDqsGqK0s48_42VxNCHdV0sc/edit#slide=id.g84263c56c_9_12]

	=== Video ===		== Video ==
	<html><iframe width="560" height="315" src="https://www.youtube.com/embed/pe85FleyInM" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="560" height="315" src="https://www.youtube.com/embed/pe85FleyInM" frameborder="0" allowfullscreen></iframe></html>

	==== Comments and Questions for the Webinar ====		=== Comments and Questions for the Webinar ===
	Feel free to ask questions for the webinar here.		Feel free to ask questions for the webinar here.

Line 49:		Line 56:
	<noscript>Please enable JavaScript to view the <a href="https://disqus.com/?ref_noscript" rel="nofollow">comments powered by Disqus.</a></noscript></html>		<noscript>Please enable JavaScript to view the <a href="https://disqus.com/?ref_noscript" rel="nofollow">comments powered by Disqus.</a></noscript></html>

	== Monday, Feb. 22, 2016 ==		= Monday, Feb. 22, 2016 =
	'''Abstract:''' The first webinar of 2016 covers some of the bigger picture items regarding the approach of OSE: the OSE [[Roadmap]] for the next 20 years, and the [[3D Printer Roadmap]] in particular, since the [[3D Printer Development]] marks our first concerted effort to create a [[Distributive Enterprise]] with [[Viral Replicability Criteria]]. See the video at the '''[[3D Printer Workshop]]''', which we plan to make into our first ongoing and regular workshop offering. We are currently developing the [[Extreme Manufacturing Workshop Model]] as a way to bootstrap fund our operations. Bootstrap funding is important to us because this model of funding allows the OSE movement to scale to many locations worldwide, and allied efforts can also build on this model. After a discussion of the OSE Roadmap, we will get into the basics of [[Open Source Product Development]], and the key elements of documentation, modular breakdown, and value creation. Finally, we will cover the first [[Design Sprint]] of 2016 - an invitation to collaborating on the 3D Printer Distributive Enterprise. The key development items on the 3D Printer are the [[3D Printer Open Source Supply Chain]]; a [[D3D Live ISO]] with software and firmware for controlling the 3D printer, so that success of the 3D Printer Workshop is not derailed in any way by computer-related issues; and initial considerations on the [[3D Printed Cordless Drill]] - which is on the 3D Printer Roadmap.		'''Abstract:''' The first webinar of 2016 covers some of the bigger picture items regarding the approach of OSE: the OSE [[Roadmap]] for the next 20 years, and the [[3D Printer Roadmap]] in particular, since the [[3D Printer Development]] marks our first concerted effort to create a [[Distributive Enterprise]] with [[Viral Replicability Criteria]]. See the video at the '''[[3D Printer Workshop]]''', which we plan to make into our first ongoing and regular workshop offering. We are currently developing the [[Extreme Manufacturing Workshop Model]] as a way to bootstrap fund our operations. Bootstrap funding is important to us because this model of funding allows the OSE movement to scale to many locations worldwide, and allied efforts can also build on this model. After a discussion of the OSE Roadmap, we will get into the basics of [[Open Source Product Development]], and the key elements of documentation, modular breakdown, and value creation. Finally, we will cover the first [[Design Sprint]] of 2016 - an invitation to collaborating on the 3D Printer Distributive Enterprise. The key development items on the 3D Printer are the [[3D Printer Open Source Supply Chain]]; a [[D3D Live ISO]] with software and firmware for controlling the 3D printer, so that success of the 3D Printer Workshop is not derailed in any way by computer-related issues; and initial considerations on the [[3D Printed Cordless Drill]] - which is on the 3D Printer Roadmap.

Line 55:		Line 62:

	<html><iframe width="280" height="165" src="https://www.youtube.com/embed/t5EWBT_Mtfw" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="280" height="165" src="https://www.youtube.com/embed/t5EWBT_Mtfw" frameborder="0" allowfullscreen></iframe></html>

	~~== Archives ==~~
	~~See [[Collaborative Literacy Playlist]] on [[YouTube]].~~

	~~<html><iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PL6Jpysxw3Ty--ILAxCWI5DRFFFvH4KzXW" frameborder="0" allowfullscreen></iframe></html>~~


	[[Category:Collaborative Literacy Webinars]]		[[Category:Collaborative Literacy Webinars]]

Marcin: /* Monday, Mar 7, 2016 */

2016-03-08T19:58:24Z

Monday, Mar 7, 2016

← Older revision		Revision as of 19:58, 8 March 2016
Line 9:		Line 9:
	== Monday, Mar 7, 2016 ==		== Monday, Mar 7, 2016 ==
	* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	* '''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.		* '''Abstract:''' Third webinar of 2016. Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.

Marcin: /* Monday, Mar 7, 2016 */

2016-03-08T19:39:11Z

Monday, Mar 7, 2016

← Older revision		Revision as of 19:39, 8 March 2016
Line 10:		Line 10:
	* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	* '''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.		* '''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.


			<html><iframe width="560" height="315" src="https://www.youtube.com/embed/TqVqmr37d4w" frameborder="0" allowfullscreen></iframe></html>

	== Monday, Feb. 29, 2016 ==		== Monday, Feb. 29, 2016 ==

MarkDilley: formatting, spell check, WikiLink YouTube

2016-03-08T03:23:24Z

formatting, spell check, WikiLink YouTube

← Older revision		Revision as of 03:23, 8 March 2016
Line 1:		Line 1:
	{{RightTOC}}		{{RightTOC}}
	=Introduction=		==Introduction==
	~~'''~~[[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.		; [[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.

	~~'''~~This is important to OSE because OSE's mission is to develop the [[Open Source Economy]] by mass creation of livelihoods - according to our [[Roadmap]]. An open source economy is built around a paradigm of collaborative development. A characteristic feature of the open source economy is the creation of [[Distributive Enterprise]].		; This is important to OSE because OSE's mission is to develop the [[Open Source Economy]] by mass creation of livelihoods - according to our [[Roadmap]]. An open source economy is built around a paradigm of collaborative development. A characteristic feature of the open source economy is the creation of [[Distributive Enterprise]].

	~~'''~~The weekly Collaborative Literacy Webinar runs at 8 PM CST USA time every Monday. The format is a Google Hangout on Air, which is recorded online and posted at the corresponding date below, immediately after the webinar becomes available on YouTube. To join the webinar, see below or the [[OSE Facebook Page]] for a link to the Webinar, which will be posted on the day of the webinar.		; The weekly Collaborative Literacy Webinar runs at 8 PM CST USA time every Monday. The format is a Google Hangout on Air, which is recorded online and posted at the corresponding date below, immediately after the webinar becomes available on YouTube. To join the webinar, see below or the [[OSE Facebook Page]] for a link to the Webinar, which will be posted on the day of the webinar.

	=Monday, Mar 7, 2016=		== Monday, Mar 7, 2016 ==
	*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		* 8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.		* '''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.

	=Monday, Feb. 29, 2016=		== Monday, Feb. 29, 2016 ==
	'''Abstract:''' This is the second webinar of 2016, and you can hear last week's webinar about the [[Roadmap]] below. We will cover [[Viral Replicability Criteria]]. What are Viral Replicability Criteria for an enterprise? How do we motivate a developer community to develop them? Read the latest blog post on the Viral Replicability Criteria - http://bit.ly/1TJbOCY. We will apply the Viral Replicability Criteria to the 3D Printer Workshop Business Plan - http://bit.ly/1TgA3do. We will survey the main needs for succeeding in replicating a 3D Printer Workshop with participants who are interested in replicating the workshop. If you are potentially interested in running 1 day 3D printer builds from scratch - where people take the 3D printer home - we can teach you how to run a workshop, and to develop a source of livelihood. To get started, join this webinar.		'''Abstract:''' This is the second webinar of 2016, and you can hear last week's webinar about the [[Roadmap]] below. We will cover [[Viral Replicability Criteria]]. What are Viral Replicability Criteria for an enterprise? How do we motivate a developer community to develop them? Read the latest blog post on the Viral Replicability Criteria - http://bit.ly/1TJbOCY. We will apply the Viral Replicability Criteria to the 3D Printer Workshop Business Plan - http://bit.ly/1TgA3do. We will survey the main needs for succeeding in replicating a 3D Printer Workshop with participants who are interested in replicating the workshop. If you are potentially interested in running 1 day 3D printer builds from scratch - where people take the 3D printer home - we can teach you how to run a workshop, and to develop a source of livelihood. To get started, join this webinar.

	'''Participants:''' MJ, Jonathan Kocurek, +..... Working doc: [https://docs.google.com/presentation/d/15kcAQryATrafgYRZheFJDqsGqK0s48_42VxNCHdV0sc/edit#slide=id.g84263c56c_9_12]		'''Participants:''' MJ, Jonathan Kocurek, +..... Working doc: [https://docs.google.com/presentation/d/15kcAQryATrafgYRZheFJDqsGqK0s48_42VxNCHdV0sc/edit#slide=id.g84263c56c_9_12]

	==Video==		=== Video ===
	<html><iframe width="560" height="315" src="https://www.youtube.com/embed/pe85FleyInM" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="560" height="315" src="https://www.youtube.com/embed/pe85FleyInM" frameborder="0" allowfullscreen></iframe></html>
	==Comments and ~~Qeustions~~ for the Webinar==
			==== Comments and Questions for the Webinar ====
	Feel free to ask questions for the webinar here.		Feel free to ask questions for the webinar here.

Line 45:		Line 46:
	<noscript>Please enable JavaScript to view the <a href="https://disqus.com/?ref_noscript" rel="nofollow">comments powered by Disqus.</a></noscript></html>		<noscript>Please enable JavaScript to view the <a href="https://disqus.com/?ref_noscript" rel="nofollow">comments powered by Disqus.</a></noscript></html>

	=Monday, Feb. 22, 2016=		== Monday, Feb. 22, 2016 ==
	'''Abstract:''' The first webinar of 2016 covers some of the bigger picture items regarding the approach of OSE: the OSE [[Roadmap]] for the next 20 years, and the [[3D Printer Roadmap]] in particular, since the [[3D Printer Development]] marks our first concerted effort to create a [[Distributive Enterprise]] with [[Viral Replicability Criteria]]. See the video at the '''[[3D Printer Workshop]]''', which we plan to make into our first ongoing and regular workshop offering. We are currently developing the [[Extreme Manufacturing Workshop Model]] as a way to bootstrap fund our operations. Bootstrap funding is important to us because this model of funding allows the OSE movement to scale to many locations worldwide, and allied efforts can also build on this model. After a discussion of the OSE Roadmap, we will get into the basics of [[Open Source Product Development]], and the key elements of documentation, modular breakdown, and value creation. Finally, we will cover the first [[Design Sprint]] of 2016 - an invitation to collaborating on the 3D Printer Distributive Enterprise. The key development items on the 3D Printer are the [[3D Printer Open Source Supply Chain]]; a [[D3D Live ISO]] with software and firmware for controlling the 3D printer, so that success of the 3D Printer Workshop is not derailed in any way by computer-related issues; and initial considerations on the [[3D Printed Cordless Drill]] - which is on the 3D Printer Roadmap.		'''Abstract:''' The first webinar of 2016 covers some of the bigger picture items regarding the approach of OSE: the OSE [[Roadmap]] for the next 20 years, and the [[3D Printer Roadmap]] in particular, since the [[3D Printer Development]] marks our first concerted effort to create a [[Distributive Enterprise]] with [[Viral Replicability Criteria]]. See the video at the '''[[3D Printer Workshop]]''', which we plan to make into our first ongoing and regular workshop offering. We are currently developing the [[Extreme Manufacturing Workshop Model]] as a way to bootstrap fund our operations. Bootstrap funding is important to us because this model of funding allows the OSE movement to scale to many locations worldwide, and allied efforts can also build on this model. After a discussion of the OSE Roadmap, we will get into the basics of [[Open Source Product Development]], and the key elements of documentation, modular breakdown, and value creation. Finally, we will cover the first [[Design Sprint]] of 2016 - an invitation to collaborating on the 3D Printer Distributive Enterprise. The key development items on the 3D Printer are the [[3D Printer Open Source Supply Chain]]; a [[D3D Live ISO]] with software and firmware for controlling the 3D printer, so that success of the 3D Printer Workshop is not derailed in any way by computer-related issues; and initial considerations on the [[3D Printed Cordless Drill]] - which is on the 3D Printer Roadmap.

Line 52:		Line 53:
	<html><iframe width="280" height="165" src="https://www.youtube.com/embed/t5EWBT_Mtfw" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="280" height="165" src="https://www.youtube.com/embed/t5EWBT_Mtfw" frameborder="0" allowfullscreen></iframe></html>

	=Archives=		== Archives ==
	See [[Collaborative Literacy Playlist]] on YouTube.		See [[Collaborative Literacy Playlist]] on [[YouTube]].

	<html><iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PL6Jpysxw3Ty--ILAxCWI5DRFFFvH4KzXW" frameborder="0" allowfullscreen></iframe></html>		<html><iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PL6Jpysxw3Ty--ILAxCWI5DRFFFvH4KzXW" frameborder="0" allowfullscreen></iframe></html>

MarkDilley: add RightTOC

2016-03-08T02:09:26Z

add RightTOC

← Older revision		Revision as of 02:09, 8 March 2016
Line 1:		Line 1:
			{{RightTOC}}
	=Introduction=		=Introduction=
	'''[[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.		'''[[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.

Marcin: /* Monday, Mar 7, 2016 */

2016-03-07T14:50:21Z

Monday, Mar 7, 2016

← Older revision		Revision as of 14:50, 7 March 2016
Line 8:		Line 8:
	=Monday, Mar 7, 2016=		=Monday, Mar 7, 2016=
	*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. We will discuss how we can create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench ~~in FreeCAD. We will introduce the problem statement of how to create and use a 3D Printer Construction Set~~ in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out~~. We will leave the meeting with a challenge of creating the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point~~. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.		*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. First - how to download and use? We can start with a [[Live Linux]] install with all settings pre-configured. We will discuss how we can then create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. We will leave the meeting with a challenge of creating an (1) OSE Live Linux FreeCAD, and (2) the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.

	=Monday, Feb. 29, 2016=		=Monday, Feb. 29, 2016=

Marcin: /* Monday, Mar 7, 2016 */

2016-03-07T14:45:25Z

Monday, Mar 7, 2016

← Older revision		Revision as of 14:45, 7 March 2016
Line 8:		Line 8:
	=Monday, Mar 7, 2016=		=Monday, Mar 7, 2016=
	*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale by using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current ~~working project~~ - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source software is critical. We will discuss how we can create part libraries - how to work with part libraries - and how part libraries can be used in a FreeCAD ~~construction set workbench~~. We will introduce the problem statement of how to ~~start~~ a 3D Printer Construction Set in FreeCAD ~~- so~~ that anyone who can learn ~~our~~ basic techniques ~~- and use library parts~~ - can design 3D printers on their own. We will leave the meeting with a challenge of creating the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point ~~for~~ an initial exercise of how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers.		*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale with Computer Aided Design (CAD) software. We are using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current developments - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source CAD software is critical. We will discuss how we can create part libraries - how to work with part libraries - and how part libraries can be used to create a Construction Set workbench in FreeCAD. We will introduce the problem statement of how to create and use a 3D Printer Construction Set in FreeCAD. The goal is that anyone who can learn basic CAD techniques - can begin to design 3D printers on their own - by using accepted library parts which have the engineering already worked out. We will leave the meeting with a challenge of creating the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point. We will explain how to do an initial large scale collaboration exercise: how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers. This process can apply to any design - such that if OSE produces Design Guides and Construction Sets in FreeCAD - any individual in the world will be able to do meaningful design on any product. This can become the basis of an [[Open Source Product Development]] paradigm that displaces the current state of art - which is based on large amounts of competitive waste.

	=Monday, Feb. 29, 2016=		=Monday, Feb. 29, 2016=

Marcin at 14:38, 7 March 2016

2016-03-07T14:38:29Z

← Older revision		Revision as of 14:38, 7 March 2016
Line 2:		Line 2:
	'''[[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.		'''[[Collaborative Literacy]] is the shared understanding about how to work together effectively in the field of [[Open Source Product Development]]. The critical challenge is how to build on other work - or and how to [[Time-Bind]] development effort.

	'''This is important to OSE because OSE's mission is to develop the [[Open Source Economy]] by mass creation of ~~right livelihood~~ - according to our [[Roadmap]]~~, and an~~ open source economy is built around a paradigm of collaborative development. A characteristic feature of the open source economy is the creation of [[Distributive Enterprise]].		'''This is important to OSE because OSE's mission is to develop the [[Open Source Economy]] by mass creation of livelihoods - according to our [[Roadmap]]. An open source economy is built around a paradigm of collaborative development. A characteristic feature of the open source economy is the creation of [[Distributive Enterprise]].

	'''The weekly Collaborative Literacy Webinar runs at 8 PM CST USA time every Monday. The format is a Google Hangout on Air, which is recorded online and posted at the corresponding date below, immediately after the webinar becomes available on YouTube. To join the webinar, see the [[OSE Facebook Page]] for a link to the Webinar, which will be posted ~~a couple~~ of ~~minutes before~~ the webinar ~~start time of 8 PM CST USA Time~~.		'''The weekly Collaborative Literacy Webinar runs at 8 PM CST USA time every Monday. The format is a Google Hangout on Air, which is recorded online and posted at the corresponding date below, immediately after the webinar becomes available on YouTube. To join the webinar, see below or the [[OSE Facebook Page]] for a link to the Webinar, which will be posted on the day of the webinar.

	=Monday, Mar 7, 2016=		=Monday, Mar 7, 2016=

Marcin at 14:34, 7 March 2016

2016-03-07T14:34:31Z

← Older revision		Revision as of 14:34, 7 March 2016
Line 8:		Line 8:
	=Monday, Mar 7, 2016=		=Monday, Mar 7, 2016=
	*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).		*8 PM CST USA - '''[https://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Join Session (up to 10 people)'''] - Or '''[https://www.youtube.com/watch?v=TqVqmr37d4whttps://plus.google.com/hangouts/_/ytl/sSPRzi9D_lUF9dmWc1fC-PzWb6dMyusLuwnH9r3ubps=?hl=en_US&authuser=1 Watch Livestream]''' (unlimited number of participants).
	*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale by using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current working project - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]]		*'''Abstract:''' Last week we covered the collaborative development of the 3D printer [[Distributive Enterprise]]. This week we will cover how design collaboration can happen in a large scale by using the open source [[FreeCAD]] software. We will introduce the workflows for doing large scale collaborative design in FreeCAD, and apply that to our current working project - [[3D Printer Development]]. OSE's approach to wide collaboration is its [[Construction Set Approach]] - and in this - open source software is critical. We will discuss how we can create part libraries - how to work with part libraries - and how part libraries can be used in a FreeCAD construction set workbench. We will introduce the problem statement of how to start a 3D Printer Construction Set in FreeCAD - so that anyone who can learn our basic techniques - and use library parts - can design 3D printers on their own. We will leave the meeting with a challenge of creating the part library in FreeCAD, using the [[3D Printer Bill of Materials]] as a starting point for an initial exercise of how to find and import parts into FreeCAD, and how to manipulate them to create designs based on accurate parts and real parts from manufacturers.

	=Monday, Feb. 29, 2016=		=Monday, Feb. 29, 2016=