https://wiki.opensourceecology.org/index.php?action=history&feed=atom&title=D3D_Quality_ControlD3D Quality Control - Revision history2026-05-08T06:49:54ZRevision history for this page on the wikiMediaWiki 1.39.13https://wiki.opensourceecology.org/index.php?title=D3D_Quality_Control&diff=207806&oldid=prevEric: Moved some content to a more fitting page2020-01-04T19:49:41Z<p>Moved some content to a more fitting page</p>
<p><b>New page</b></p><div>=Sat Aug 31, 2019=<br />
*D3D 19.06 - Y2 axix must be constrained only in the Y direction, not X, since that is the auto parallel. The implication is that the linear bearings on Y2 can be loose in the X direction, but not in the Y direction<br />
*Just one electric tape layer around bearing could overtighten the bearings, while without this layer the bearings could be perfectly smooth. -> Even one half layer made it stick.<br />
*Y carriage upper bolts are inaccessible without a nut holder tool. Move axis away from frame?<br />
*Overtightening bolts on lightest drill setting can bend the 20% carriage. Carriage may want to be printed with 40% and highest quality possible.<br />
*Temperature overshoot of bed makes you wait a bit of time for temp to drop back down on startup.<br />
*Smell from rock wool should be eliminated with non off-gasing material</div>Eric