Haasoscope Pro - Revision history

Eric: Added some more links under the “Internal Links” section

2025-04-28T14:18:00Z

Added some more links under the “Internal Links” section

← Older revision		Revision as of 14:18, 28 April 2025
Line 41:		Line 41:

	=Internal Links=		=Internal Links=
	*		*[[EEZ BB3]] (aka [[Bench Box 3]])

	=External Links=		=External Links=
	*[https://www.crowdsupply.com/andy-haas/haasoscope-pro The [[Crowd Supply]] Page for the Haasoscope Pro]		*[https://www.crowdsupply.com/andy-haas/haasoscope-pro The [[Crowd Supply]] Page for the Haasoscope Pro]
	*[https://www.cnx-software.com/2025/02/27/haasoscope-pro-open-source-real-time-sampling-usb-oscilloscope-with-2ghz-bandwidth/?amp=1 An Article by “CNX SOFTWARE – EMBEDDED SYSTEMS NEWS” from February 2025 Titled “ Haasoscope Pro open-source, real-time sampling USB oscilloscope supports up to 2GHz bandwidth (Crowdfunding)” ]		*[https://www.cnx-software.com/2025/02/27/haasoscope-pro-open-source-real-time-sampling-usb-oscilloscope-with-2ghz-bandwidth/?amp=1 An Article by “CNX SOFTWARE – EMBEDDED SYSTEMS NEWS” from February 2025 Titled “ Haasoscope Pro open-source, real-time sampling USB oscilloscope supports up to 2GHz bandwidth (Crowdfunding)” ]

Eric: Added some more links under the “External Links” section

2025-04-28T14:11:36Z

Added some more links under the “External Links” section

← Older revision		Revision as of 14:11, 28 April 2025
Line 45:		Line 45:
	=External Links=		=External Links=
	*[https://www.crowdsupply.com/andy-haas/haasoscope-pro The [[Crowd Supply]] Page for the Haasoscope Pro]		*[https://www.crowdsupply.com/andy-haas/haasoscope-pro The [[Crowd Supply]] Page for the Haasoscope Pro]
			*[https://www.cnx-software.com/2025/02/27/haasoscope-pro-open-source-real-time-sampling-usb-oscilloscope-with-2ghz-bandwidth/?amp=1 An Article by “CNX SOFTWARE – EMBEDDED SYSTEMS NEWS” from February 2025 Titled “ Haasoscope Pro open-source, real-time sampling USB oscilloscope supports up to 2GHz bandwidth (Crowdfunding)” ]

Eric: Added some more links under the “External Links” section

2025-04-28T14:09:02Z

Added some more links under the “External Links” section

← Older revision		Revision as of 14:09, 28 April 2025
Line 44:		Line 44:

	=External Links=		=External Links=
	*		*[https://www.crowdsupply.com/andy-haas/haasoscope-pro The [[Crowd Supply]] Page for the Haasoscope Pro]

Eric: Added some more information

2025-04-28T14:06:09Z

Added some more information

← Older revision		Revision as of 14:06, 28 April 2025
Line 8:		Line 8:
	*Quote:		*Quote:
	**FPGA – Intel Altera Cyclone IV E FPGA (EP4CE30F23C7N)		**FPGA – Intel Altera Cyclone IV E FPGA (EP4CE30F23C7N)
	**Host interface – USB-C		**Host interface – [[USB-C]]
	**Bandwidth to host computer – 40MB/s		**Bandwidth to host computer – 40MB/s
	**Analog Input		**Analog Input
Line 26:		Line 26:
	***Standard triggers – Rising/falling edge, time over threshold (customizable in firmware)		***Standard triggers – Rising/falling edge, time over threshold (customizable in firmware)
	**Peripherals		**Peripherals
	***2x USB-A (for powering active probes)		***2x [[USB-A]] (for powering active probes)
	***2x BNC inputs		***2x [[BNC]] inputs
	***2x RJ45 connectors (SYNC IN, SYNC OUT)		***2x [[RJ45]] connectors (SYNC IN, SYNC OUT)
	**Debugging – JTAG interface		**Debugging – JTAG interface
	**Power Supply		**Power Supply
Line 34:		Line 34:
	***~7W power consumption		***~7W power consumption
	**Onboard voltage regulators		**Onboard voltage regulators
	**Overvoltage protection (TVS diode)		**[[Overvoltage protection]] (TVS diode)
	**Dimensions – 220 x 165 x 35 mm		**Dimensions – 220 x 165 x 35 mm
	**Weight – 900 grams		**Weight – 900 grams

Eric: Created Page + Added Basic Sections/Info

2025-04-28T14:05:13Z

Created Page + Added Basic Sections/Info

New page

=Basics=
*An Open Source High End Oscilloscope with USB Out
*Quote: “ The Haasoscope Pro USB oscilloscope is “designed to be low cost, while maintaining super-fast performance.” While it only comes with 2 channels, the flexible design makes it possible to combine and sync multiple devices (using Cat5 cables) to double the sample rate or add more channels.

The oscilloscope works with standard x10 passive probes but a custom active probe, the Haasoscope Pro-be, is also offered. It supports the full 2GHz analog bandwidth and is priced much cheaper than similar probes.”

=Specifications=
*Quote:
**FPGA – Intel Altera Cyclone IV E FPGA (EP4CE30F23C7N)
**Host interface – USB-C
**Bandwidth to host computer – 40MB/s
**Analog Input
**Channels: 2 (expandable)
**Input Impedance: 50 Ω (<1 pF) or 1 MΩ (10 pF)
**Analog Bandwidth: 2 GHz at 50 Ω, 800 MHz at 1 MΩ
**Vertical Resolution: 12 bits
**Sample Rate: 3.2 GS/s (1 channel), 1.6 GS/s (2 channels), expandable to 6.4 GS/s
**Anti-alias filtering: Switchable for each sample rate
**Max Input: ±5V (50 Ω), ±3V (1 MΩ), ±30V with x10 probe
**Input Sensitivity: 32 Vpp down to 80 mVpp (5 mVpp with digital zoom)
**Programmable Input CouplingAC or DC per channel
**Programmable DC Offsets per channel
**Samples per Trigger: Up to 40k, adjustable trigger time offset
**Triggering
***External Trigger input, Aux trigger/clock output, external reference clock input (3x SMA connectors)
***Standard triggers – Rising/falling edge, time over threshold (customizable in firmware)
**Peripherals
***2x USB-A (for powering active probes)
***2x BNC inputs
***2x RJ45 connectors (SYNC IN, SYNC OUT)
**Debugging – JTAG interface
**Power Supply
***5V 1.5A via USB-C or 12V 1A via 2.1mm barrel connector
***~7W power consumption
**Onboard voltage regulators
**Overvoltage protection (TVS diode)
**Dimensions – 220 x 165 x 35 mm
**Weight – 900 grams
Case – Aluminum case with quiet 40mm internal fan

=Internal Links=
*

=External Links=
*