HyperMesh - Revision history

SimonF: Minor corrections. Added SNMP and DSCP.

2011-02-22T18:26:44Z

Minor corrections. Added SNMP and DSCP.

← Older revision		Revision as of 18:26, 22 February 2011
Line 7:		Line 7:
	*Ethernet, wireless, and broadband connectivity		*Ethernet, wireless, and broadband connectivity
	*3G/4G compatible		*3G/4G compatible
	*~~VOIP~~		*VoIP
	*Price point per unit of less than $50, less than $20 is preferred.		*Price point per unit of less than $50, less than $20 is preferred.

Line 15:		Line 15:
	*8P8C - A plastic connector (8 position, 8 conductors) for physically interfacing with the HyperMesh device (used often in 10Base-T and up Ethernet networks).		*8P8C - A plastic connector (8 position, 8 conductors) for physically interfacing with the HyperMesh device (used often in 10Base-T and up Ethernet networks).

	Configuration and ~~diagnosis~~ would take place via Ethernet or through Wireless connection.		Configuration, diagnosis and monitoring (SNMP) would take place via Ethernet or through Wireless connection in order to acheive maximum availability.
			DSCP (previously knowned as QoS or ToS) has to be supported to guarantee reliable VoIP.

	Alternatively,		Alternatively,
Line 25:		Line 26:
	*RAM - enough to operate quickly and efficiently even under high stress.		*RAM - enough to operate quickly and efficiently even under high stress.
	*SSD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved using any physical or wireless connection.		*SSD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved using any physical or wireless connection.
	*NET - Controller for 802.3, 802.~~11 s~~/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.		*NET - Controller for 802.3, 802.11g and 802.11s (a/b/n are optional), and IMT-2000. Might be incorporated into the BIOS.

	License: TAPR Open Hardware License		License: TAPR Open Hardware License

	Website: http://ubermesh.blogspot.com		Website: http://ubermesh.blogspot.com

SimonF: SSD specification modified.

2011-02-20T23:59:37Z

SSD specification modified.

← Older revision		Revision as of 23:59, 20 February 2011
Line 24:		Line 24:
	*I/O - A USB and 8P8C connector for basic interface with the device. USB is optional. The device could be accessed and configured using any physical or wireless connection.		*I/O - A USB and 8P8C connector for basic interface with the device. USB is optional. The device could be accessed and configured using any physical or wireless connection.
	*RAM - enough to operate quickly and efficiently even under high stress.		*RAM - enough to operate quickly and efficiently even under high stress.
	*~~SDD~~ - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved ~~via RJ-45~~ or ~~Wirelessly~~.		*SSD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved using any physical or wireless connection.
	*NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.		*NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.

SimonF: I/O specification modified.

2011-02-20T23:23:02Z

I/O specification modified.

← Older revision		Revision as of 23:23, 20 February 2011
Line 22:		Line 22:
	*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.		*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
	*PPE - Primary Processing Element, a Central Processing Unit.		*PPE - Primary Processing Element, a Central Processing Unit.
	*I/O - A USB and 8P8C connector for basic interface with the device. USB is optional. The device could be accessed and configured using any physical connection ~~or wirelessly~~.		*I/O - A USB and 8P8C connector for basic interface with the device. USB is optional. The device could be accessed and configured using any physical or wireless connection.
	*RAM - enough to operate quickly and efficiently even under high stress.		*RAM - enough to operate quickly and efficiently even under high stress.
	*SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.		*SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.

SimonF: I/O specification modified.

2011-02-20T23:22:08Z

I/O specification modified.

← Older revision		Revision as of 23:22, 20 February 2011
Line 22:		Line 22:
	*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.		*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
	*PPE - Primary Processing Element, a Central Processing Unit.		*PPE - Primary Processing Element, a Central Processing Unit.
	*I/O - A USB and ~~RJ45~~ connector for basic interface with the device. USB is optional. The device could be accessed and configured ~~via RJ45~~ or ~~Wirelessly~~.		*I/O - A USB and 8P8C connector for basic interface with the device. USB is optional. The device could be accessed and configured using any physical connection or wirelessly.
	*RAM - enough to operate quickly and efficiently even under high stress.		*RAM - enough to operate quickly and efficiently even under high stress.
	*SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.		*SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.

SimonF: Correction of 8P8C description.

2011-02-20T22:48:35Z

Correction of 8P8C description.

← Older revision		Revision as of 22:48, 20 February 2011
Line 13:		Line 13:
	*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.		*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
	PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.		PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.
	*8P8C - ~~An Ethernet~~ connector for physically interfacing with the HyperMesh device.		*8P8C - A plastic connector (8 position, 8 conductors) for physically interfacing with the HyperMesh device (used often in 10Base-T and up Ethernet networks).

	Configuration and diagnosis would take place via Ethernet or through Wireless connection.		Configuration and diagnosis would take place via Ethernet or through Wireless connection.

Conor at 01:11, 19 February 2011

2011-02-19T01:11:12Z

Conor at 01:08, 19 February 2011

2011-02-19T01:08:10Z

← Older revision		Revision as of 01:08, 19 February 2011
Line 3:		Line 3:

	The specifications must be identified:		The specifications must be identified:
	- Multiple Input, Multiple Output		*Multiple Input, Multiple Output
	- Opportunistic mesh networking		*Opportunistic mesh networking
	- Ethernet, wireless, and broadband connectivity		*Ethernet, wireless, and broadband connectivity
	- 3G/4G compatible		*3G/4G compatible
	- VOIP		*VOIP
	- Price point per unit of less than $50, less than $20 is preferred.		*Price point per unit of less than $50, less than $20 is preferred.

	Outside resiliency is desired.		Outside resiliency is desired.

Conor at 00:59, 19 February 2011

2011-02-19T00:59:43Z

← Older revision		Revision as of 00:59, 19 February 2011
Line 1:		Line 1:
			{{Category=Wireless mesh networking}}
	The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community.		The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community.

Eleftherios Kosmas: Created page with "The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community. The specifications must b..."

2011-02-13T22:24:21Z

Created page with "The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community. The specifications must b..."

New page

The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community.

The specifications must be identified:
- Multiple Input, Multiple Output
- Opportunistic mesh networking
- Ethernet, wireless, and broadband connectivity
- 3G/4G compatible
- VOIP
- Price point per unit of less than $50, less than $20 is preferred.

Outside resiliency is desired.
PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the BIONOS.
BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.
8P8C - An Ethernet connector for physically interfacing with the HyperMesh device.

Configuration and diagnosis would take place via Ethernet or through Wireless connection.

Alternatively,
http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg

PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
PPE - Primary Processing Element, a Central Processing Unit.
I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly.
RAM - enough to operate quickly and efficiently even under high stress.
SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.
NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.

License: TAPR Open Hardware License

Website: http://ubermesh.blogspot.com

← Older revision		Revision as of 01:11, 19 February 2011
Line 11:		Line 11:

	Outside resiliency is desired.		Outside resiliency is desired.
	PSU - A Power Supply Unit that would provide sufficient power to all the component parts.		*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
	PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the ~~BIONOS.~~		PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.
	BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.		*8P8C - An Ethernet connector for physically interfacing with the HyperMesh device.
	8P8C - An Ethernet connector for physically interfacing with the HyperMesh device.

	Configuration and diagnosis would take place via Ethernet or through Wireless connection.		Configuration and diagnosis would take place via Ethernet or through Wireless connection.
Line 21:		Line 20:
	http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg		http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg

	PSU - A Power Supply Unit that would provide sufficient power to all the component parts.		*PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
	PPE - Primary Processing Element, a Central Processing Unit.		*PPE - Primary Processing Element, a Central Processing Unit.
	I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly.		*I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly.
	RAM - enough to operate quickly and efficiently even under high stress.		*RAM - enough to operate quickly and efficiently even under high stress.
	SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.		*SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.
	NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.		*NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.

	License: TAPR Open Hardware License		License: TAPR Open Hardware License

	Website: http://ubermesh.blogspot.com		Website: http://ubermesh.blogspot.com