Ikea Lack Enclosure - Revision history

Eric: Minor Readability Improvement

2024-03-08T21:07:17Z

Minor Readability Improvement

← Older revision		Revision as of 21:07, 8 March 2024
Line 79:		Line 79:
	*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Phillips-Pan-Head-Zinc-Plated-Sheet-Metal-Screw-50-Pack-801112/204596362 50 Pack Galvanized] ( '''~9 USD''' )		*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Phillips-Pan-Head-Zinc-Plated-Sheet-Metal-Screw-50-Pack-801112/204596362 50 Pack Galvanized] ( '''~9 USD''' )
	***Reading further and the hol;e may be 9mm so use #14?		***Reading further and the hol;e may be 9mm so use #14?
	****Quote: From Rudel @Rudel_19548 "Update: The holes on the printed parts are indeed 9mm as you listed in the instructions. However, the #12 pan head screws are just over 10mm wide. Ended up using #14x3/4 screws for the center holes on the corner pieces with the pre drilled Ikea holes. #8x3/4 pan head sheet metal screws perfectly fit everywhere else!" - January 1, 2023		****Quote: From Rudel @Rudel_19548 '''"Update: The holes on the printed parts are indeed 9mm as you listed in the instructions. However, the #12 pan head screws are just over 10mm wide. Ended up using #14x3/4 screws for the center holes on the corner pieces with the pre drilled Ikea holes. #8x3/4 pan head sheet metal screws perfectly fit everywhere else!" - January 1, 2023'''

	=Internal Links=		=Internal Links=

Eric: Brought Everyone Up to Speed on What I Just Did and Plan to Do

2024-03-08T21:06:34Z

Brought Everyone Up to Speed on What I Just Did and Plan to Do

← Older revision		Revision as of 21:06, 8 March 2024
Line 37:		Line 37:
	=Build by [[User: Eric]] =		=Build by [[User: Eric]] =
	==Planning==		==Planning==
			*Not much on it as of now, but i did make a [https://docs.google.com/presentation/d/1VZ0hDmYWNrAukPso25Yth_GrN9__RMRJKQ-CV-1VI8Y/edit?usp=sharing Google Slide Document on This] for a [[vBOM]] and other related things

	===What i currently have:===		===What i currently have:===
	*1x Prusa MK3s+ Printer (No modifications, stock spoolholder in original position)		*1x Prusa MK3s+ Printer (No modifications, stock spoolholder in original position)

Eric: Minor Typo Fix

2024-03-08T21:04:10Z

Minor Typo Fix

← Older revision		Revision as of 21:04, 8 March 2024
Line 75:		Line 75:
	****Home Depot (what we have down here in florida) doesn't have the ''exact'' brand, but these should work:		****Home Depot (what we have down here in florida) doesn't have the ''exact'' brand, but these should work:
	*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Zinc-Plated-Phillips-Pan-Head-Sheet-Metal-Screw-8-Pack-830441/317479273 8 Pack Galvanized] ( '''~2 USD''')		*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Zinc-Plated-Phillips-Pan-Head-Sheet-Metal-Screw-8-Pack-830441/317479273 8 Pack Galvanized] ( '''~2 USD''')
	*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Phillips-Pan-Head-Zinc-Plated-Sheet-Metal-Screw-50-Pack-801112/204596362 50 Pack Galvanized] ( '''!9 USD''' )		*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Phillips-Pan-Head-Zinc-Plated-Sheet-Metal-Screw-50-Pack-801112/204596362 50 Pack Galvanized] ( '''~9 USD''' )
	***Reading further and the hol;e may be 9mm so use #14?		***Reading further and the hol;e may be 9mm so use #14?
	****Quote: From Rudel @Rudel_19548 "Update: The holes on the printed parts are indeed 9mm as you listed in the instructions. However, the #12 pan head screws are just over 10mm wide. Ended up using #14x3/4 screws for the center holes on the corner pieces with the pre drilled Ikea holes. #8x3/4 pan head sheet metal screws perfectly fit everywhere else!" - January 1, 2023		****Quote: From Rudel @Rudel_19548 "Update: The holes on the printed parts are indeed 9mm as you listed in the instructions. However, the #12 pan head screws are just over 10mm wide. Ended up using #14x3/4 screws for the center holes on the corner pieces with the pre drilled Ikea holes. #8x3/4 pan head sheet metal screws perfectly fit everywhere else!" - January 1, 2023

Eric: Minor Clarification

2024-03-08T21:03:27Z

Minor Clarification

← Older revision		Revision as of 21:03, 8 March 2024
Line 77:		Line 77:
	*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Phillips-Pan-Head-Zinc-Plated-Sheet-Metal-Screw-50-Pack-801112/204596362 50 Pack Galvanized] ( '''!9 USD''' )		*****[https://www.homedepot.com/p/Everbilt-12-x-3-4-in-Phillips-Pan-Head-Zinc-Plated-Sheet-Metal-Screw-50-Pack-801112/204596362 50 Pack Galvanized] ( '''!9 USD''' )
	***Reading further and the hol;e may be 9mm so use #14?		***Reading further and the hol;e may be 9mm so use #14?
			****Quote: From Rudel @Rudel_19548 "Update: The holes on the printed parts are indeed 9mm as you listed in the instructions. However, the #12 pan head screws are just over 10mm wide. Ended up using #14x3/4 screws for the center holes on the corner pieces with the pre drilled Ikea holes. #8x3/4 pan head sheet metal screws perfectly fit everywhere else!" - January 1, 2023

	=Internal Links=		=Internal Links=

Eric: Saving My Progress Mid-Long Edit

2024-03-08T21:01:27Z

Saving My Progress Mid-Long Edit

@@ Line 42: / Line 42: @@
 *2x Ikea Lack Tables
 *Filament (Need to decide on color used throughout, probably Black Polyterra PLA, although that white marble may work (and not have issues of looking "off" vs the paint on the table) (although going for black or some random color also has that advantage) (also as long as it is all the same color aesthetics don't matter too much, i just don't want chaotic me running out of a color mid-project and using another color; i have yet to adopt the [[Half Full is Empty Model]] and have a spare spool of each and buy a new one each time i use the spare)
 =Internal Links=

Eric: Brought Everyone Up to Speed on What I Just Did and Plan to Do

2024-03-08T20:08:30Z

Brought Everyone Up to Speed on What I Just Did and Plan to Do

← Older revision		Revision as of 20:08, 8 March 2024
Line 34:		Line 34:
	*[https://www.printables.com/model/11158-ikea-lack-adjustable-foot A Design Posted to the website Printables by "Strankler" Titled "IKEA-LACK adjustable foot" ]		*[https://www.printables.com/model/11158-ikea-lack-adjustable-foot A Design Posted to the website Printables by "Strankler" Titled "IKEA-LACK adjustable foot" ]
	**Allows for Leveling the Enclosure (Although as per the Upside Down Printing [[Positon (FDM 3D Printer) ]] , and [that video by Maker's Muse with a printer working hanging from a [[Ratchet Strap]] ] most modern printers are quite resilient in regards to issues like this		**Allows for Leveling the Enclosure (Although as per the Upside Down Printing [[Positon (FDM 3D Printer) ]] , and [that video by Maker's Muse with a printer working hanging from a [[Ratchet Strap]] ] most modern printers are quite resilient in regards to issues like this

			=Build by [[User: Eric]] =
			==Planning==
			===What i currently have:===
			*1x Prusa MK3s+ Printer (No modifications, stock spoolholder in original position)
			*1x Sunlu Filidryer S2
			*2x Ikea Lack Tables
			*Filament (Need to decide on color used throughout, probably Black Polyterra PLA, although that white marble may work (and not have issues of looking "off" vs the paint on the table) (although going for black or some random color also has that advantage) (also as long as it is all the same color aesthetics don't matter too much, i just don't want chaotic me running out of a color mid-project and using another color; i have yet to adopt the [[Half Full is Empty Model]] and have a spare spool of each and buy a new one each time i use the spare)

	=Internal Links=		=Internal Links=

Eric: Added some more links under the "Existing Open Source Designs" Section

2024-03-08T20:02:44Z

Added some more links under the "Existing Open Source Designs" Section

← Older revision		Revision as of 20:02, 8 March 2024
Line 22:		Line 22:
	**The MMU is notoriously finicky, so other systems (or just normal single filament printing) shouldn't need this, but regardless having a slit rather than a fixed hole does seem to make sense due to the x axis travel moving that vertical line where the filament should optimally be		**The MMU is notoriously finicky, so other systems (or just normal single filament printing) shouldn't need this, but regardless having a slit rather than a fixed hole does seem to make sense due to the x axis travel moving that vertical line where the filament should optimally be
	*If using an upper level for [[FDM Filament Storage]] a hole and filament guide will be needed		*If using an upper level for [[FDM Filament Storage]] a hole and filament guide will be needed

			==Window/Door Assembly==
			*[https://www.printables.com/model/22008-double-stack-ikea-lack-enclosure-v2-works-w-mmu2s A Design Posted to the website Printables by "Mordiev" Titled "Double Stack IKEA LACK Enclosure V2 (works w/ MMU2s)" ]
			*[https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr/files A Design Posted to the website Printables by "Dominik Císař" Titled "Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research" ]
			**'''This is the ORIGINAL Design all others are forked from/based on'''
			*[https://www.printables.com/model/14152-prusa-i3-mk3-corner-enclosure-ikea-lack-table A Design Posted to the website Printables by "Inglord" Titled "Prusa i3 MK3 Corner ENCLOSURE - Ikea LACK table" ]
			**Novel in that lays the printer across the diagonal, making more efficient use of the internal volume of the table in theory (''also would make for a very aesthetically appealing print farm!'' )

	==Misc==		==Misc==

Eric: Added some more links under the "Existing Open Source Designs" Section

2024-03-08T19:53:30Z

Added some more links under the "Existing Open Source Designs" Section

@@ Line 17: / Line 17: @@
 **[https://www.printables.com/model/337852-ikea-lack-table-reinforcement A Design Posted to the website Printables by "3DesignsCH" Titled "Ikea Lack Table Reinforcement" ]
 **[https://www.printables.com/model/751962-ikea-lack-reinforcement A Design Posted to the website Printables by "JADV" Titled "IKEA LACK reinforcement" ]
 =Internal Links=

Eric: Added some more links under the "Existing Open Source Designs" Section

2024-03-08T19:44:55Z

Added some more links under the "Existing Open Source Designs" Section

← Older revision		Revision as of 19:44, 8 March 2024
Line 3:		Line 3:
	*Various designs use different 3D Printed brackets, and are set up for different filament storage workflows		*Various designs use different 3D Printed brackets, and are set up for different filament storage workflows
	*This page aims to document existing Open Source Designs, Derive the best setup, and make a BOM (also maybe document [[User: Eric]] 's Build Progress)		*This page aims to document existing Open Source Designs, Derive the best setup, and make a BOM (also maybe document [[User: Eric]] 's Build Progress)

			A Design Posted to the website Printables by "X" Titled "X"

	=Existing Open Source Designs=		=Existing Open Source Designs=
	*		==Table Connection Only==
			*[https://www.printables.com/model/295437-ikea-lack-table-storage-shelves/comments A Design Posted to the website Printables by "815 Design" Titled "Ikea Lack Table Storage Shelves" ]

			==Table Reinforcement==
			*Due to Ikea Lack tables being made from low grade [[Engineered Wood Products]] to reduce weight and cost, they aren't very rigid
			**This is compounded by the sole connection being dual sided bolts in a drilled but not tapped hole
			*Thus Reinforcements and Alternative Joinery can be of use
			*Designs:
			**[https://www.printables.com/model/337852-ikea-lack-table-reinforcement A Design Posted to the website Printables by "3DesignsCH" Titled "Ikea Lack Table Reinforcement" ]
			**[https://www.printables.com/model/751962-ikea-lack-reinforcement A Design Posted to the website Printables by "JADV" Titled "IKEA LACK reinforcement" ]

	=Internal Links=		=Internal Links=

Eric: Created Page + Added Basic Sections/Info

2024-03-08T00:06:05Z

Created Page + Added Basic Sections/Info

New page

=Basics=
*This is a version of a [[3D Printer Enclosure]] that uses [[Ikea Lack]] tables as the main framing element
*Various designs use different 3D Printed brackets, and are set up for different filament storage workflows
*This page aims to document existing Open Source Designs, Derive the best setup, and make a BOM (also maybe document [[User: Eric]] 's Build Progress)

=Existing Open Source Designs=
*

=Internal Links=
*

=External Links=
*