LifeTrac III/Manufacturing Instructions - Revision history

Dorkmo: /* Assembly */

2012-03-25T21:17:14Z

Assembly

← Older revision		Revision as of 21:17, 25 March 2012
Line 143:		Line 143:
	# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Frame\| Frame]] - Page on assembling the frame from old nav bar		# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Frame\| Frame]] - Page on assembling the frame from old nav bar
	# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Arms\| Arms]] - Page on assembling the arms from old nav bar		# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Arms\| Arms]] - Page on assembling the arms from old nav bar
			# [[LifeTrac_III/Manufacturing_Instructions/Assemble/QA_Plate\| Quick Attach Plate ]]
	# [http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics] - Link to hydraulics on Make Projects - no content		# [http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics] - Link to hydraulics on Make Projects - no content

Nottern link: Outline edit

2012-03-24T15:15:38Z

Outline edit

← Older revision		Revision as of 15:15, 24 March 2012
Line 7:		Line 7:
	{{Warning\|The LifeTrac design is in development. Some information contained in these pages may be out of date.}}		{{Warning\|The LifeTrac design is in development. Some information contained in these pages may be out of date.}}

	==Fabrication Report==		==Documents==
	[[File:LifeTrac Fabrication Report 25FEB2012.pdf]]		===Fabrication Report===
			*[[File:LifeTrac Fabrication Report 25FEB2012.pdf]] - This is the latest all-encompassing documentation. It includes the BOM, illustrations, and project steps necessary to build LifeTrac III.

	~~This is the latest all-encompassing documentation. It includes the BOM, illustrations, and project steps necessary to build LifeTrac III.~~		===Fabrication Drawings===

	==Fabrication Drawings==
	*[http://openpario.mime.oregonstate.edu/attachments/4306/LifeTrac3_-_2D_Fab_Drawings.PDF LifeTrac3 2D Fab Drawings] - Note these drawings are incomplete and not up to standard quality		*[http://openpario.mime.oregonstate.edu/attachments/4306/LifeTrac3_-_2D_Fab_Drawings.PDF LifeTrac3 2D Fab Drawings] - Note these drawings are incomplete and not up to standard quality
			*[[LifeTrac_III/CADCAM\| CAD & CAM Files]]

			=Preparation=
	==Preparation==

	# [[/Safety\| Safety]]		# [[/Safety\| Safety]]
	# [[/Workspace\| Workspace]]		# [[/Workspace\| Workspace]]
	# [[/Tools\| Tools]]		# [[/Tools\| Tools]]
			# [[/BOM\| Bill of Materials]]

			=Parts Manufacture=
			* The purpose of this section is to prepare the components for final assembly. This includes cutting steel into required lengths and shapes, drilling, welding and shaping as required for final assembly.
			{{Wanted\|Reformat to match format of [[CEB_Press/Manufacturing_Instructions#Parts_Fabrication\| CEB Parts Fabrication]]}}

	==Steel Cut List==		==Steel Cut List==
Line 58:		Line 62:

	====¼” Thick, 2 3/8" Dia Steel Tube====		====¼” Thick, 2 3/8" Dia Steel Tube====
	* 1 @ 4 1/2"		* 1 @ 4 1/2"==Parts Fabrication==

	====¼” Thick, 4" x 4" Steel Tube====		====¼” Thick, 4" x 4" Steel Tube====
Line 81:		Line 85:
	-->		-->

	~~==Parts Fabrication==~~
	* The purpose of this section is to prepare the components for final assembly. This includes cutting steel into required lengths and shapes, drilling, welding and shaping as required for final assembly.
	~~{{Wanted\|Reformat to match format of [[CEB_Press/Manufacturing_Instructions#Parts_Fabrication\| CEB Parts Fabrication]]}}~~

	====¼” x 4" x 4" Steel Tube====		==¼” x 4" x 4" Steel Tube==
	* Verify the following 4" x 4" tubes have already been cut:		* Verify the following 4" x 4" tubes have already been cut:

Line 94:		Line 95:
	::[[Image:LifeTracFrameJig.png\|600px]]		::[[Image:LifeTracFrameJig.png\|600px]]

	==== Drilling Tubes ====		== Drilling Tubes ==

	* Unless otherwise specified, drill all holes at 13/16" diameter.		* Unless otherwise specified, drill all holes at 13/16" diameter.
Line 138:		Line 139:
	# [[LifeTrac_III/Manufacturing_Instructions/Misc/Tread_Rebar\| Rebar]] - Bending rebar for treads		# [[LifeTrac_III/Manufacturing_Instructions/Misc/Tread_Rebar\| Rebar]] - Bending rebar for treads

	==Assembly==		=Assembly=
	{{Wanted\|Reorganize to match [[Power_Cube/Manufacturing_Instructions#Assembly\| Power Cube Assembly]] layout}}		{{Wanted\|Reorganize to match [[Power_Cube/Manufacturing_Instructions#Assembly\| Power Cube Assembly]] layout}}
	# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Frame\| Frame]] - Page on assembling the frame from old nav bar		# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Frame\| Frame]] - Page on assembling the frame from old nav bar
Line 144:		Line 145:
	# [http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics] - Link to hydraulics on Make Projects - no content		# [http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics] - Link to hydraulics on Make Projects - no content

	==Previous ~~Assemlby~~ Pictures and Instructions==		==Previous Assembly Pictures and Instructions==
	'''This is probably accurate but needs to have its own page to keep consistent with the other projects like the CEB Press and the Power Cube.'''		'''This is probably accurate but needs to have its own page to keep consistent with the other projects like the CEB Press and the Power Cube.'''

Line 171:		Line 172:
	</html>		</html>

	=Wheel Motor Upgrade=		=Updates=

			==Wheel Motor Upgrade==

	See [[Quick Attach Wheels]]		See [[Quick Attach Wheels]]

	=Loader Arm Upgrade=		==Loader Arm Upgrade==
	==BOM==		===BOM===
	* 2 917-2212 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3500 14.00		* 2 917-2212 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3500 14.00
	* 3 917-2224 1/2" X 24" 1/2 NPTM X 1/2 NPTM 3500 27.00		* 3 917-2224 1/2" X 24" 1/2 NPTM X 1/2 NPTM 3500 27.00

Matt Maier at 17:38, 25 February 2012

2012-02-25T17:38:42Z

← Older revision		Revision as of 17:38, 25 February 2012
Line 6:		Line 6:

	{{Warning\|The LifeTrac design is in development. Some information contained in these pages may be out of date.}}		{{Warning\|The LifeTrac design is in development. Some information contained in these pages may be out of date.}}

			==Fabrication Report==
			[[File:LifeTrac Fabrication Report 25FEB2012.pdf]]

			This is the latest all-encompassing documentation. It includes the BOM, illustrations, and project steps necessary to build LifeTrac III.

	==Fabrication Drawings==		==Fabrication Drawings==

Fmoor: /* Steel Cut List */

2012-02-24T23:49:42Z

Steel Cut List

← Older revision		Revision as of 23:49, 24 February 2012
Line 19:		Line 19:
	==Steel Cut List==		==Steel Cut List==
	* This list contains instructions for cutting the raw steel into pieces for assembly. Most will require further cuts before being ready for assembly.		* This list contains instructions for cutting the raw steel into pieces for assembly. Most will require further cuts before being ready for assembly.
			*Cut the steel into the following lengths.
			*Label and separate cuts by "Step" number so you can easily find cuts for each step during the fabrication stage.
			*Note: Item Number and part number refer to CAD information. This is un-necessary if you are following the fabrication steps listed.
			<html><iframe width='750' height='300' frameborder='0' src='https://docs.google.com/spreadsheet/pub?key=0Ase0fhS6TipedF9OZ2MzbEEyYVZ4RWpFeUtYV0Q4Tnc&output=html'></iframe>
			</html><br/>
			[https://docs.google.com/spreadsheet/pub?key=0Ase0fhS6TipedF9OZ2MzbEEyYVZ4RWpFeUtYV0Q4Tnc&output=html Link] to printable page.

			<!--
	{{Wanted\|Reformat to match format of [[CEB_Press/Manufacturing_Instructions#Steel_Cut_List\| CEB Steel Cutlist]]}}		{{Wanted\|Reformat to match format of [[CEB_Press/Manufacturing_Instructions#Steel_Cut_List\| CEB Steel Cutlist]]}}
	====3/8” Thick, 8" Plate====		====3/8” Thick, 8" Plate====
Line 66:		Line 74:
	* 4 @ 28"		* 4 @ 28"
	* 1 @ 56"		* 1 @ 56"
			-->

	==Parts Fabrication==		==Parts Fabrication==

Marcin: /* Wheel Motor Upgrade */

2012-02-05T18:23:33Z

Wheel Motor Upgrade

← Older revision		Revision as of 18:23, 5 February 2012
Line 160:		Line 160:

	See [[Quick Attach Wheels]]		See [[Quick Attach Wheels]]

			=Loader Arm Upgrade=
			==BOM==
			* 2 917-2212 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3500 14.00
			* 3 917-2224 1/2" X 24" 1/2 NPTM X 1/2 NPTM 3500 27.00
			* 2 917-2260 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3500 30.00
			* 1 917-2272 1/2" X 72" 1/2 NPTM X 1/2 NPTM 3500 17.00
			* 2 917-22108 1/2" X 108" 1/2 NPTM X 1/2 NPTM 3500 48.00
			* 1 917-22120 1/2" X 120" 1/2 NPTM X 1/2 NPTM 3500 26.00
			* 1 917-22144 1/2" X 144" 1/2 NPTM X 1/2 NPTM 3500 30.00
			* 4 9-1501-8-8 1/2 NPTM x 1/2 NPTF 90 SWIVEL 13.60
			* 4 9-1603-8-8-8 1/2 x 1/2 x 1/2 NPTF SWIVEL TEE 32.00
			* 4 9-1501-6-8 3/8 NPTM x 1/2 NPTF 90 SWIVEL 15.60
			* 2 9-5404-8-8 1/2 NPT HEX NIPPLE 3.30
			* 2 9-7710-20 2X20X1.25 DA HYD CYL 1 PINS HVY DUTY 301.90
			* 2 9-6401-8-8 SAE 8M TO 1/2" NPTM CONNECTOR 3.50
			* 2 9-6901-8-8 SAE 8M x 1/2 NPTF 90 SWIVEL 11.00
			* 16 1-2768-187 1.875 DOUBLE SPLIT SHAFT COLLAR 128.00

			* Total $: 700.90
			____________________________________________________________________________

			* Order Recap:
			* Total Product $: 700.90
			* Net Product$: 700.90
			* Shipping: 50.60
			* Sales Tax: 0.00
			* Insurance : 2.00
			* Grand Total: 753.50

Marcin: /* Previous Assemlby Pictures and Instructions */

2012-02-05T18:21:07Z

Previous Assemlby Pictures and Instructions

← Older revision		Revision as of 18:21, 5 February 2012
Line 156:		Line 156:
	<iframe src="https://player.vimeo.com/video/29845279?title=0&byline=0&portrait=0" width="400" height="225" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe>		<iframe src="https://player.vimeo.com/video/29845279?title=0&byline=0&portrait=0" width="400" height="225" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe>
	</html>		</html>

			=Wheel Motor Upgrade=

			See [[Quick Attach Wheels]]

MikeA at 06:03, 27 January 2012

2012-01-27T06:03:05Z

← Older revision		Revision as of 06:03, 27 January 2012
Line 1:		Line 1:
	{{Header Build\|ToolParent=LifeTrac\|ToolName=LifeTrac III}}		{{Header Build\|ToolParent=LifeTrac\|ToolName=LifeTrac III}}
	=Overview=		==Overview==
	This page gives you all the information you need to make your LifeTrac III from stock steel and parts.		This page gives you all the information you need to make your LifeTrac III from stock steel and parts.

Line 6:		Line 6:

	{{Warning\|The LifeTrac design is in development. Some information contained in these pages may be out of date.}}		{{Warning\|The LifeTrac design is in development. Some information contained in these pages may be out of date.}}

			==Fabrication Drawings==
			*[http://openpario.mime.oregonstate.edu/attachments/4306/LifeTrac3_-_2D_Fab_Drawings.PDF LifeTrac3 2D Fab Drawings] - Note these drawings are incomplete and not up to standard quality


	==Preparation==		==Preparation==
Line 152:		Line 156:
	<iframe src="https://player.vimeo.com/video/29845279?title=0&byline=0&portrait=0" width="400" height="225" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe>		<iframe src="https://player.vimeo.com/video/29845279?title=0&byline=0&portrait=0" width="400" height="225" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe>
	</html>		</html>

	~~=See Also=~~
	*[http://openpario.mime.oregonstate.edu/attachments/4304/LifeTrac_III__SolidWorks_parts___assembly_.zip LifeTrac III Solidworks CAD]
	*[http://openpario.mime.oregonstate.edu/attachments/4306/LifeTrac3_-_2D_Fab_Drawings.PDF LifeTrac3 2D Fab Drawings]

MikeA at 04:42, 27 January 2012

2012-01-27T04:42:42Z

← Older revision		Revision as of 04:42, 27 January 2012
Line 1:		Line 1:
	{{~~ToolBuildOperate~~\|ToolParent=LifeTrac\|ToolName=LifeTrac III}}		{{Header Build\|ToolParent=LifeTrac\|ToolName=LifeTrac III}}
	=Overview=		=Overview=
	This page gives you all the information you need to make your LifeTrac III from stock steel and parts.		This page gives you all the information you need to make your LifeTrac III from stock steel and parts.

MikeA at 22:15, 25 January 2012

2012-01-25T22:15:51Z

← Older revision		Revision as of 22:15, 25 January 2012
Line 1:		Line 1:
	{{ToolBuildOperate\|ToolParent=LifeTrac\|ToolName=LifeTrac III}}		{{ToolBuildOperate\|ToolParent=LifeTrac\|ToolName=LifeTrac III}}
	~~{{LifeTrac Manufacturing Instructions Navbox}}~~
	=Overview=		=Overview=
	This page gives you all the information you need to make your LifeTrac III from stock steel and parts.		This page gives you all the information you need to make your LifeTrac III from stock steel and parts.

MikeA: /* Assembly */

2012-01-25T22:15:01Z

Assembly

← Older revision		Revision as of 22:15, 25 January 2012
Line 122:		Line 122:

	==Assembly==		==Assembly==
			{{Wanted\|Reorganize to match [[Power_Cube/Manufacturing_Instructions#Assembly\| Power Cube Assembly]] layout}}
			# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Frame\| Frame]] - Page on assembling the frame from old nav bar
			# [[LifeTrac_III/Manufacturing_Instructions/Assemble/Arms\| Arms]] - Page on assembling the arms from old nav bar
			# [http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics] - Link to hydraulics on Make Projects - no content

			==Previous Assemlby Pictures and Instructions==
			'''This is probably accurate but needs to have its own page to keep consistent with the other projects like the CEB Press and the Power Cube.'''

	* Use 6 blocks to support the 3 bottom cross members		* Use 6 blocks to support the 3 bottom cross members