WikiSysop: New page: Fab Lab Inventory 3/24/08 Epilog Laser http://www.epiloglaser.com/ Mini 24" x 12" 35W laser cutter Depending on where you are in the world, you can buy one of these for $16,000-$20,000U...

2008-07-13T16:55:37Z

New page: Fab Lab Inventory 3/24/08 Epilog Laser http://www.epiloglaser.com/ Mini 24" x 12" 35W laser cutter Depending on where you are in the world, you can buy one of these for $16,000-$20,000U...

New page

Fab Lab Inventory
3/24/08

Epilog Laser
http://www.epiloglaser.com/
Mini 24" x 12" 35W laser cutter
Depending on where you are in the world, you can buy
one of these for $16,000-$20,000US. For US domestic
purchases please contact Mark Schwarz at Epilog:
Mark Schwarz
Epilog Laser
303.277.1188
epiloglaser.com
marks@epiloglaser.com
For international purchases please contact Bob Henry at Epilog:
bobh@epiloglaser.com
Tell them you want to buy the "MIT Fab Lab" laser cutter.

For the Laser cutter you will need some kind of ventilation or filter
for the system. If you are unable to vent out of doors, you should
order a Purex filter (Hepa filter). These are rather expensive --
approximately $3,000. You should order this through your Epilog
contact. If you plan to vent out of doors You will need to order an
exhaust system from Grizzly or Penn State or a dealer of your choice.
(pennstateindustries.com Model DC5-5 ) Buy a gate for the exhaust so
that you can control the amount of suction in the machine. This is
particularly important when engraving or cutting light items. (Similar
to either Penn State PN # DB4, ABS plastic or aluminum N-BGAO4 (4
inch). You will need the correct amount of tubing for your
application. (Similar to Penn State PN D08 or D10PC). Don't forget
to buy the clamps for the tubing. (grizzly.com is another source that
carries similar products. Also try Craftsman 3/4 hp Portable Dust
Collector :Sears item #00921335000 Mfr. model #OR65000 at Sears.com.)"

ShopBot
PRSstandard96 (96x48x8in) with: $7995
220V 4HP spindle: $2895
dust collector:

Roland
http://www.rolanddga.com/
1 MDX-20 milling machine 8"(X)x6"(Y)x2-3/8"(Z) 10W 0.000246 in./step (0.00625 mm/step) 6500 rpm $4,495
1 GX-24 CAMM-1 SERVO vinyl cutter 2" - 27.5"(5.08cm - 69.85cm) 20 IPS 30gf - 250gf $1,995

Amazon.com
http://www.amazon.com
stock cutting:
1 DeWalt DW788S 20" Variable Speed Scroll Saw with Stand and Light $449.99
machining clean-up:
1 Black and Decker CHV9600 9.6-Volt Cyclonic DustBuster $29.99
mold curing, solder reflow:
1 Cuisinart TOB-175BC Convection Toaster Oven/Broiler, Brushed Chrome $178.85
surface mount rework:
1 Weller Heat Gun, Model 6966C, 750-800 Degrees Farenheit $115.85
For 220V version of the Weller Heat Gun, please source locally, part #6966E.

Techni-Tool
http://www.techni-tool.com
1 471TE2110/SFG-2110/Instek Function Generator, 10 MHz DDS with Counter/$420.00 $420.00 **
1 471TE3303/GPS-3303/Instek Power Supply, Triple Output, DC, Digital, 30V, 3A/$420.00 $420.00**
1 471TE821/GDS-820C/Instek Digital Storage Oscilloscope, 150 MHz, Color/$1295.05 $1295.05**
1 516IN346/ Luxo Magnifier Light, IFM,5 DIOPTER, 45" ARM, CLAMP-ON/$107.90 $107.90***
3 516IN640/Luxo Magnifier Lamp Replacement bulbs/$13.00 $39.00

** These can be ordered in a 220V/50Hz configuration. For 220V/240V test equipment
please contact: Fotronics Inc. (www. testequipmentdepot.com) They will convert these items
to 220V for you. Phone: Tel#781-665-1400 or 800-517-8431.
***The Luxo Magnifier Lamp can be purchased in 220V from Techni-tool (call them) or
sourced locally. Part#16912, KFM series, 5 diopter, 45" Arm, Clamp-on. Cost is $257.00
for 220V. The replacement bulbs are the same as listed above.

Digi-Key
http://www.digikey.com/
resistors:
1,000 311-0.0ERCT-ND/RES 0.0 OHM 1/4W 5% 1206 SMD-$0.01653/ $16.53
100 PRL1632.100FCT-ND/RES .100 OHM 1W 1% 1206 SMD/$0.36140/$36.14
1,000 311-1.00FRCT-ND/RES 1.00 OHM 1/4W 1% 1206 SMD-$0.01856/ $18.56
1,000 311-4.99FCT-ND/RES 4.99 OHM 1/4W 1% 1206 SMD-$0.01856/ $18.56
1,000 311-10.0FCT-ND/RES 10.0 OHM 1/4W 1% 1206 SMD-$0.01856/ $18.56
1,000 311-49.9FRCT-ND/RES 49.9 OHM 1/4W 1% 1206 SMD-$0.01856/ $18.56
1,000 311-100FRCT-ND/RES 100 OHM 1/4W 1% 1206 SMD/0.01856/$18.56
1,000 311-499FRCT-ND/RES 499 OHM 1/4W 1% 1206 SMD-$0.01856/ $18.56
1,000 311-1.00KFRCT-ND/RES 1.00K OHM 1/4W 1% 1206 SMD-$0.01856/$18.56
1,000 311-4.99KFRCT-ND/RES 4.99K OHM 1/4W 1% 1206 SMD/$0.01856/$18.56
1,000 311-10.0KFCT-ND/RES 10.0K OHM 1/4W 1% 1206 SMD-$0.01856/$18.56
1,000 311-49.9KFRCT-ND/RES 49.9K OHM 1/4W 1% 1206 SMD-$0.01856/$18.56
1,000 311-100KFRCT-ND/RES 100K OHM 1/4W 1% 1206 SMD/0.01856/$18.56
1,000 311-499KFRCT-ND/RES 499K OHM 1/4W 1% 1206 SMD/0.01856/$18.56
1,000 311-1.00MFRCT-ND/RES 1.00M OHM 1/4W 1% 1206 SMD-$0.01856/$18.56
1,000 311-4.99MFRCT-ND/RES 4.99M OHM 1/4W 1% 1206 SMD-$0.01856/$18.56
1,000 311-10.0MFRCT-ND/RES 10.0M OHM 1/4W 1% 1206 SMD-$0.01856/$18.56
capacitors:
500 311-1212-1-ND/CAP CERAMIC 1PF 50V NP0 1206-$0.04200/$21.00
500 311-1150-1-ND/CAP CERAMIC 10PF 50V NP0 1206-$0.03612/$18.06
500 311-1161-1-ND/CAP CERAMIC 100PF 50V NP0 1206-$0.04200/$21.00
500 311-1144-1-ND/CAP 1000PF 1KV CERAMIC X7R 1206-$0.15300/$76.50
500 311-1174-1-ND/CAP 10000PF 50V CERAMIC X7R 1206 $0.03360/$16.80
500 399-4674-1-ND/CAP CERAMIC .1UF 250V X7R 1206/0.13126/$65.63
250 PCC2234CT-ND/CAP 1.0UF 50V CERAMIC F 1206/0.15180/$37.95
1,000 311-1196-1-ND/CAP 3.3UF 16V CERAMIC Y5V 1206-$0.06080/ $60.80
100 587-1352-1-ND/CAP CER 10UF 35V Y5V 1206/0.20800/$20.80
10 589-1002-ND/CAPACITOR ULTRA 10F 2.7V RADIAL/$3.24500/$32.45
chokes:
25 PCD2144CT-ND/CHOKE COIL 1.2UH 6500MA SMD/1.62800/$40.70
25 PCD2152CT-ND/CHOKE COIL 10UH 3900MA SMD/1.62800/$40.70
25 PCD2164CT-ND/CHOKE COIL 100UH 1200MA SMD/1.62800/$40.70
25 PCD2176CT-ND/CHOKE COIL 1000UH 410MA SMD/1.62800/$40.70
diodes:
500 497-5559-1-ND/DIODE SCHOTTKY 100V SGL SOD-123/0.15360/$57.60
500 BZT52C3V3-FDICT-ND/DIODE ZENER 500MW 3.3V SOD123/$0.12/$60.00
500 BZT52C4V7-13-FDICT-ND/DIODE ZENER 4.7V 500MW SOD-123/$0.12/$60.00
transistors:
250 NDS355ANCT-ND/MOSFET N-CH 30V 1.7A 3-SSOT/$0.29700/ $74.25
250 NDS356APCT-ND/MOSFET P-CH -30V +1-1.1A 3-SSOT/$0.33750/ $84.38
50 FDR4420ACT-ND/MOSFET N-CHAN 30V 11A SSOT8/1.05000/$52.50
50 ZXMHC3A01T8CT-ND/MOSFET H-BRIDGE DUAL SM-8/$2.53800/$126.90
regulators:
250 LM3480IM3-3.3CT-ND/IC 3.3V100MA LDO VREG SOT23/$0.43500/$108.75
250 LM3480IM3-5.0CT-ND/IC 5.0 100MA LDO VREG SOT23/$0.43500/$108.75
100 LM2940IMP-5.0CT-ND/IC 5V 1A LDO VREG SOT223/$1.17640/$117.64
LEDs:
250 160-1167-1-ND/LED RED CLEAR 1206 SMD/$0.07600/$19.00
250 160-1169-1-ND/LED GREEN CLEAR 1206 SMD/$0.07000/$17.50
100 441-1009-ND LED MINI WEDGE WHITE WATER CLEAR/$1.06600/$106.60
100 475-1236-1-ND/LED RGB 4-PLCC SMD/0.61030/$61.03
100 QED123-ND/LED IR EMITTING ALGAAS 880NM 5MM/0.23400/$23.40
100 365-1148-1-ND/LED IR 880NM FLAT LENS 1206 SMD/0.26000/$26.00
photodetectors:
100 QSD123-ND/IC PHOTOTRANS IR 880NM BLACK 5MM/0.23760/$23.76
100 365-1155-1-ND/PHOTOTRANSISTOR NPN OPAQUE 1206/0.24000/$24.00
100 365-1157-1-ND/PHOTOTRANSISTOR NPN CLEAR 1206/0.22000/$22.00
LCD:
25 67-1781-ND/LCD MODULE 16x2 CHARACTER/$4.88000/$122.00
speakers and microphones:
25 GC0351M-ND/SPEAKER 16X35MM 8 OHMS .5WATT/2.94000/$73.50
50 423-1043-ND/MIC CONDENSER ELEC -40+-3DB PIN/1.68000/$84.00
thermistor:
25 235-1109-1-ND/THERMISTOR NTC 10K OHM 10% 1206/2.26800/$56.70
op-amp:
100 AD8605ARTZREEL7CT-ND/IC OPAMP SNGL R-R I/O LN SOT23-5/1.00500/$100.50
microcontrollers:
200 ATTINY45V-10SU-ND/IC AVR MCU 4K 10MHZ 8SOIC/1.18000/$236.00
100 ATTINY44-20SSU-ND/IC MCU AVR 4K FLASH 20MHZ 14SOIC/1.42000/$142.00
50 ATMEGA88-20AU-ND/IC AVR MCU 8K 20MHZ 5V 32TQFP/2.36000/$118.00
resonator:
100 PX200BCT-ND/RESONATR CERM W/CAP 20.00MHZ SMD/0.48460/$48.46
buttons and switches:
50 401-1001-1-ND/SWITCH SLIDE SPDT 12V 100MA GW/$1.03200/$51.60
100 SW262CT-ND/SWITCH TACT SMD W/GND 160GF/0.54400/$54.40
magnets:
100 469-1004-ND/MAGNET 1/4"DIA X 1/8"THICK/$0.16880/$16.88
100 469-1002-ND/MAGNET 1/2"DIA X 1/8"THICK/$0.33750/$33.75
headers:
10 ED23064-ND/CONN SOCKET 64POS.100 SMT/$5.05700/$50.57
10 ED2164-ND/CONN HEADER 64POS.100 R/ANGLE/$5.71500/ $57.15
jacks and plugs:
100 CP1-023PJCT-ND/CONN PWR JACK DC 0.65X2.75MM SMD/$0.44800/$44.80
100 CP-012-ND/CONN DC PWR PLUG 0.7X2.35MM/$0.60000/$60.00
50 CP-002AHPJCT-ND/CONN/POWER JACK 2.1MM SMD/$0.69900/$34.95
100 CP-2501SP-ND/CONN PLUG STEREO 2.5MM W/COVER/$0.64000/$64.00
100 CP1-2533SJCT-ND/CONN JACK STEREO 3PIN 2.5MM SMD/$0.46200/$46.20
50 CP-1453-ND/CONN RCA PLUG W/STRAIN REL BLK/$0.79300/$39.65
10 SC1323-ND/CONN JACK PHONO 2POS SHIELDED/2.55000/$25.50
ribbon cable and connectors:
25 HFP09H-ND/CONN DB9 FEMALE PLASTIC SHELL/3.22400/$80.60
25 HMP25H-ND/CONN DB25 MALE PLASTIC SHELL/4.05600/$101.40
1 AE09M-300-ND/CABLE 9 COND 300' MULTI RIBBON/136.91000/$136.91
test clips:
5 923655-08-ND/8-PN GOLD SMD TEST CLIP/$11.35000/$56.75
antistatic bags:
100 16-1032-ND/BAG ESD SHLD 3"X5" METAL-IN ZIP/$0.08350/$8.35
100 16-1034-ND/BAG ESD SHLD 5"X8" METAL-IN ZIP/0.16590/$16.59
50 16-1036-ND/BAG ESD SHLD 8"X10" METAL-IN ZIP/$0.40520/$20.26
heat shrink tubing:
5 A116B-4-ND/HEATSHRINK 1/16 IN X 4FT BLACK/$0.57600/$2.88
5 A018B-4-ND/HEATSHRINK 1/8 IN X 4FT BLACK/$0.65800/$3.29
5 A014B-4-ND/HEATSHRINK 1/4 IN X 4FT BLACK/$1.00000/$5.00
5 A038B-4-ND/HEATSHRINK 3/8 IN X 4FT BLACK/$1.11600/$5.58
5 A012B-4-ND/HEATSHRINK 1/2 IN X 4FT BLACK/$1.26000/$6.30
soldering:
4 KE1409-ND/SOLDER NO-CLEAN .020" X 1 lb/$24.75/$99.00
1 K416-ND/FAN FUME ABSORBER BENCHTOP 115V/$121.2900/$121.29
10 EB1088-ND/QUICK BRAID GOLD .050" X 10'/$3.37000/$33.70
1 WES51-ND/SOLDER STATION ANALOG 50W/$99.00000/$99.00***
5 ETU-ND/TIP REPLACEMENT SINGLE FLAT.015"/$5.12000/$25.60
tools:
20 EROP7SA-ND/TWEEZER CURVED PRECISION TIP/$2.49000/$49.80
5 PAL1106.1-ND/WIRE STRIP/CUTTER P20 30-20AWG/$11.49000/$57.45
5 MS54-ND/PLIER DIAGONAL CUTTING/$11.99000/$59.95
5 L4-ND/PLIER SUBMINIATURE LONG NOSE/$13.04000/$65.20
10 243-1021-ND/MAGNIFIER EYE LOUPE 10X 1" LENS/$1.80000/$18.00
4 201PV-ND/PANAVISE JR. UNIVERSAL VISE/$23.99000/$95.96
2 XP600-ND SCREWDRIVER PRECISION SET 6 PC/$21.03000/$42.06
battery connections:
100 BS6I-MC-ND/9V BATTERY SNAP WITH 2PC MOLDED/$0.35000/$35.00
50 BH9V-W-ND/HOLDER BATTERY 9V WIRE LEADS/$0.79500/$39.75
100 55K-ND/CLIP BATTERY AAA/N CELL SMT/$0.12810/$12.81
multimeter:
3 PM51A-ND/DMM PKT W/FREQ & CAPACITANCE/3/$28.95000/$86.85

For labs requiring 220V:
** You will need to source this locally as this part is 110V
*** Welding Station: WES51DUK: 220V, 50Hz you will need to source this locally

Mouser
http://www.mouser.com
ribbon cable connectors:
100 571-14453622/1445362-2/AMP MTA .050" Connectors/2P REC KIT,RIBN CBL 28 AWG/$0.270/$ 27.00
100 571-14453623/1445362-3/AMP MTA .050" Connectors/3P REC KIT,RIBN CBL 28 AWG/$ 0.340/$ 34.00
100 571-14453624/1445362-4/AMP MTA .050" Connectors/4P REC KIT, RIBN CBL 28 AWG/$ 0.440/$ 44.00
100 571-14453625/1445362-5/AMP MTA .050" Connectors/5P REC KIT, RIBN CBL 28 AWG/$ 0.510/$ 51.00
100 571-14451212/1445121-2/AMP MTA .050" Connectors/2P VERT PIN HDR, SMT Tin/$ 0.560/$ 56.00
100 571-14451213/1445121-3/AMP MTA .050" Connectors/3P VERT PIN HDR, SMT Tin/$ 0.630/$ 63.00
100 571-14451214/1445121-4/AMP MTA .050" Connectors/4P VERT PIN HDR, SMT Tin/$ 0.700/$ 70.00
200 571-14451215/1445121-5/AMP MTA .050" Connectors/5P VERT PIN HDR, SMT Tin/$ 0.770/$ 154.00
100 571-14451722/1445172-2/AMP MTA .050" Connectors/2P R/A PIN HDR, SMT Tin/$ 0.520/$ 52.00
100 571-14451723/1445172-3/AMP MTA .050" Connectors/3P R/A PIN HDR, SMT Tin/$ 0.560/$ 56.00
100 571-14451724/1445172-4/AMP MTA .050" Connectors/4P R/A PIN HDR, SMT Tin/$ 0.630/$ 63.00
100 571-14451725/1445172-5/AMP MTA .050" Connectors/5P R/A PIN HDR, SMT Tin/$ 0.760/$ 76.00

Jameco
http://www.jameco.com
ultrasonic transducers:
10 139492/SENSOR,ULTRASONIC,40KHZ,TRAN(1),REC(1),112db/67db,2000pf/VARIOUS 40TR12B-R/$6.96/$69.60
motors:
50 231732/MOTOR,DC,6-24V,4800RPM,0.11A,12.3G-CM,0.6W,SHFT 02X9.6mm/$1.89/$94.50
50 232127/MOTOR,DC,6-12V,17000RPM,1.7A,72.9G-CM,12.7W,SHFT 02.3X13mm/$2.02/$101.00
20 237382/MOTOR,DC,24V/0.9A,2680RPM,178GM-CM,0.09"SHFT DIA./$6.11/$122.20
50 210391/MOTOR,STEP,24VDC/110 ohm,UNIPOLAR,3.75deg,SHFT0.12X0.41/$1.07/$53.50
20 237788/MOTOR,STEP,9VDC/.18A,15deg,100 GM-CM,40/$3.55/$71.00
power supplies:
10 249121/TRANS,WALL,24VDC/1150mA,F2,2.1mm X 5.5mm,UL/CUL/$21.10/$211.00
10 143693/TRANS,WALL,9VDC/1.5A,F2,2.1mm X 5.5mm,UL/CSA/$9.49/$94.90
test leads:
10 CABLE ASSEMBLY,RG174,BNC TO MICROHOOK/JAMECO BENCHPRO 05-A-081-R/11422/$3.19/$31.90
10 CABLE ASSEMBLY,RG174,BNC TO MINIHOOK/JAMECO BENCHPRO 05-A-078-R/11464/$3.99/$39.90
coax adapters:
10 PLUG,BNC/BANANA/JAMECO VALUEPRO 03-701A-R/11440/$5.39/$53.90
10 BNC DOUBLE M TO BNC DOUBLE F/JAMECO VALUEPRO BJ-70823/207124/$4.05/$40.50
third hands:
5 TOOL,THIRD HAND/VARIOUS 3RD HAND/26690/$5.95/$29.75

McMaster-Carr
http://www.mcmaster.com/
measuring:
10 2388A71/Ss Pocket Rule Without Clip Or Depth Gauge Inch/Decimal Graduations, 6" Length/$5.01 Each/$50.10
1 1760T86 Compact Digital Bench Scale with Ss Platform 2000 Grams X 0.1 Grams, 70.55 oz X .005 oz / $295.45
1 2289A45 Economy Dial Caliper 0-6" Range, .001" (.02mm) Graduations $28.97
6 6839A75 High-Visibility Long Measuring Tape Inch/Metric Grads, 50'/15M X 3/8" Neon Orange $12.39 Each $74.34
storage:
2 5073T12 Cardboard Bin Box Standard, 2" W x 12" D x 4" H, 10 Pack; $7.71/pk $15.42
2 5073T29 Cardboard Bin Box Standard, 3" W x 12" D x 4" H, 10 Pack; $10.57/pk $21.14
2 5073T11 Cardboard Bin Box Standard, 4" W x 12" D x 4" H, 10 Pack; $13.01/pk $26.02
2 5073T14 Cardboard Bin Box Standard, 6" W x 12" D x 4" H, 10 Pack; $9.98/pk $19.96
2 5073T15 Cardboard Bin Box Standard, 8" W X 12" D X 4" H, 10 Pack $11.36/pk $23.82
4 9619T61 Plastic Drawer Cabinet 16 Small Polypropylene Drawers, 8-1/2" H Overall $8.84/ea $35.36
1 9619T71 Plastic Drawer Cabinet 24 Large Polypropylene Drawers, 15-13/16" H Overall $22.36
cutting:
4 41865A-12 Scroll Saw Blade Regular Cut;.250" Width, .028" thk, 20 tpi, 12-pack $5.11/pk $20.44
4 41865A-14 Scroll Saw Blade Fast Cut Skip Tooth, .029" W, .012" thk, 20 tpi, 12-pack $4.78/pk $19.12
4 41865A-16 Scroll Saw Blade Fast Cut Skip Tooth, .100" W, .022" Thk, 9 Tpi, 12 pack $5.33/pk $21.32
10 35545A71 Auto-Lock Breakaway-Blade Utility Knife Trimline w/Three 13-Point Blades $2.69 $26.90
molding and casting:
5 9389K61/Nonabrasive Machinable Wax Hard Purple Bar, 1-1/4" Thick X 3-1/2" W X 12" L/$23.64 Each/$118.20
1 1865T45 Small Disposable Polystyrene Cup 2-1/2 Ounce Cap, 2-1/2" Top Od X 1-3/4" Height, Packs of 250 $13.47 Pack $13.47
1 77985T54 6" Length Wooden Paint Stirrer, Packs of 500 $8.23 Pack $16.46
2 52555T1 Nitrile Disposable Gloves Powder Free, 5 MIL Thick, 9-1/2" L, Large, Blue, Boxes of 100 $13.33 Box $26.66
10 17805T81 Disposable Aluminum Weighing Dish Smooth Sides, 2-7/8" Diameter X 3/4" Depth, Packs of 100 $8.72 Pack $43.60
cable ties:
5 7134K21/Reusable Nylon Cable Tie Top Tab, 6" L, 1-1/2" Bundle Diameter, Off-White, Packs of 100/$6.22 Pack/$31.10
5 7134K61/Reusable Nylon Cable Tie Top Tab, 15" L, 4-1/4" Bundle Diameter, Off-White, Packs of 25/$6.66 Pack/$33.30
hand tools:
5 4057A52 Maxi-Grip Magnetic Hand Driver Ratcheting;2 ea Phil Slotted, Torx, SQ, Pozidrive $15.45 $77.25
3 8174A42 12-Piece Economy Needle-File Set 5-1/2" Long, Cut No.2 $16.36 Set $49.08
glue gun
1 7578A11 Cordless Glue Gun $22.98
2 7518A717 Clear Glue Stick, 1/2" X 4", 1-lb Package $6.61/pk $13.22
Modela collet hex key and set screw
5 5503A36 Ball-Point L-Key 1.5mm Hex, 3-5/64" Blade Length $0.58/$2.90
2 92605A097 Metric 18-8 SS Flat Point Socket Set Screw M3 Size, Packs of 25 $4.40 Pack $8.80
lasercutter cardboard
2 20855T66 Heavy Duty Corrugated Paperboard Carton 10 Pack$16.26/$32.52
magnet wire
1 7588K71 Magnet Wire 30 AWG, Copper, 3000' Length Spool $14.88 Spool $14.88
cleaning swab
1 7074T62 Swab Cotton-Low Lint Tip,.141" Diam X .44" L Tip, 6" L O'all, 1000/pk $18.75/ Pack
vinyl-cut PCB substrate
10 8525K411 Grade Xx Tan Garolite Sheet 1/32" Thick, 12" X 12" $2.36$23.60
non-skid feet
1 6968T61 Textured-Surface Antislip Runner Mat Rubber, 36" W X 48" L, 3/32" Thick, Black, Pebbled Top $19.78 Each $19.78
lasercutter acryclic
5 8473K278 Preshrunk Clear Cast Acrylic Sheet 1/8" Thick,12"X24" $34.20 $171.00

US Gypsum
http://plaster.com/
10 Hydrostone Super X - 1 Gallon Pail $9.25 $99.25
10 Drystone - 1 Gallon Pail $9.75 $99.75

Smooth-On
http://www.smooth-on.com/
10 PMC-121/30 DRY - 2 lbs $22.00 $220.00

Blick Art Materials
http://www.dickblick.com/
10 33523-1005 INSTAMOLD COMPOUND, 12OZ $6.92 $69.20
5 33504-1925 FLEXWAX MATERIAL, 2.5LB $14.99 $74.95

Budnick Converting
http://www.budnickconverting.com Prices as of 7/15/08
Permacel # 595B transfer adhesive 6"x60 yds. @ $41.04/roll
3M #214 masking tape 6"x60 yds @ $140.60/roll
3M #1 epoxy film on liner 6"x100 yds @ $181.76/roll
3M #1126 copper tape with conductive adhesive 6"x36 yds @$236.44/roll

Vinyl rolls
beacongraphics.com
(note this is "Sign" vinyl, 4 years durability, opaque, A4 series)
(A4120-O-F) A4 OPQU Can Yel 1550 ($49.00)
(A4330-O-F) A4 OPQU Card Red 1550 ($49.00)
(A4583-O-M) A4 OPQU Royal Blue 2450 ($78.00)
(A4673-O-M) A4 OPQU Cactus Grn 2450 ($78.00)

Global Laminates
http://www.globallaminates.com/
machineable PCB stock
FR1 .062 1/0 40"x48"
3"x2"=16x20=320/sheet
6"x4"=8x10=80/sheet

Carbide Depot
http://www.carbidedepot.com/
25 4FL SE 1/64 AlTiN COATED (SGS 30191) $15.24 $381.00
10 4FL SE 1/32 AlTiN COATED (SGS 30192) $8.07 $80.70
10 4FL SE 1/16 AlTiN COATED (SGS 30194) $7.33 $73.30
10 4FL SE 3/32 AlTiN COATED (SGS 30196) $7.06 $70.60
10 4FL SE 1/8 AlTiN COATED (SGS 30198) $6.54 $65.40
10 4FL SE BALLNOSE 1/64 AlTiN COATED (SGS 30031) $19.69 $196.90
10 4FL SE BALLNOSE 1/32 AlTiN COATED (SGS 30032) $10.26 $102.60
10 4FL SE BALLNOSE 1/16 AlTiN COATED (SGS 30034) $9.25 $92.50
10 4FL SE BALLNOSE 3/32 AlTiN COATED (SGS 30036) $9.25 $92.50
10 4FL SE BALLNOSE 1/8 AlTiN COATED (SGS 30038) $8.28 $80.28

router bits, collets

VMI Sales (Plotter Blades for the Roland)
http://www.vmisales.com/plotter_blades/
5 Roland 45 Degree Plotter Blades, 5 pack $32.50/pk $162.50

Staples
http://www.staples.com
Modela stock fixturing:
25 504829/Model 137 Scotch Double Sided Permanent Tape with Dispenser, 1/2" x 450"/$2.89 Each/$72.25
molding and casting cups:
5 563562/TP10 Solo Plastic Party Cups, 10-oz./$6.79 50/Pack/$33.95
5 494051/Model TP16 Solo Plastic Party Cups, 16-oz. Clear/$5.79 50/Pack/$28.95
5 617688/Model RK5 Translucent Plastic Cold Cups, 5-oz, 100/Pack/$2.99 100/Pack/$14.95
cleaning supplies:
10 538868/Model 5320 Kimberly-Clark Utility Wipes, 9" x 10 1/2", 125/Pack/$3.79 125/Pack/$37.90
3 428881/Model E507008 Angle Sweep Broom/$12.99 Each/$38.97
3 390402/Model 700 Plastic Dust Pan/$3.15 Each/$9.45
office supplies:
5 229690/13023/13403 Acme 8" Economy Shears, Bent-Handle, 3/Pack/$7.99 3/Pack/$39.95
5 514742/Model 11454-CC Staples Mechanical Pencils .7mm, Black Barrel w/ Blue Grip, Dozen/$2.98/$14.90
5 399782/Model L50BP3HB-K6 Pentel Super Hi-Polymer Lead Refills, 0.7mm, HB, 36 Leads/$2.09/$10.45
5 264291/Model ZE21BP3-K6 Pentel Clic Eraser with Grip, 3/Pack/$3.89/$19.45
3 163451/Model 11299 Staples Glue-Top Scratch Pads, 5" x 8", White, 12/Pack/$9.08/$27.24
5 609009/Model 4184/Scotch Transparent Tape with Refillable Dispenser/$7.79 4/Pack/$38.95
5 452605/Model 07364/Duck HP260 Crystal-Clear Packaging Tape w/ Dispenser, Clear, 1.89" x 60 yds/$7.99 Each/$39.95
batteries:
1 607025/Model MN1604TC12 Duracell 9-Volt Alkaline Batteries, 48/Pack/$144.99/$144.99
labeller and tape:
1 615073/Model PT18R Brother PT-18R Rechargeable Label Maker/$129.99/$129.99
3 486803/Model TZ231 Brother 1/2" (12mm) Black on White tape/$17.99/$53.97
3 522946/Model TZ-221/Brother 3/8" (9mm) Black on White tape/$16.49/$49.47
3 486852/Model TZ241 Brother 3/4" (18mm) Black on White tape/$20.99/$62.97
3 392381/Model TZ211 Brother 1/4" (6mm) Black on White tape/$13.69/$41.07

Office Depot
http://www.officedepot.com/
variable temperature laminator
1 535400 Wilson Jones LV250HS Laminating Machine $124.95/ea
1 777512 Memorex Spindle CD-RW 25 ct. $16.55
1 908996 Manual Vacuum Hold Pencil Sharpener $11.13/ea
2 317447 HP Multi Use Paper 20 lb. 96 bright $4.50/ream
2 142364 Sanford Super Sharpie Fine Point 6/pk $5.74 $11.48
2 535640 Clear Laminating Pouches, Luggage Tag w/Loop, 5 mm, 2 1/2" x 4 1/4", 25-pack $8.95/pack $17.90
2 535704 Clear Laminating Pouches, Letter Size, 3 mm, 9" x 11 1/2", 50-pack $11.95/pack $23.90
2 535616 Clear Laminating Pouches, ID Badge, 5 mm, 2 9/16" x 3 3/4", 25-pack $7.49/pack $14.98
10 321984 Fiskars Stainless Steel Ruler, 12"(30cm) $3.08/ea $30.80
10 588286 Office Depot One Subject Notebooks $1.49/ea $11.49
10 423608 BIC Round Stic Ballpoint Pens, Fine Point, 0.8 mm, Blue, Box Of 12 $0.99/dozen $9.90
plotter markers

PC Connection/GovConnection
http://www.pcconnection.com
1 310393 OfficePower 1500AVR Automatic Voltage Regulator UPS $219.95
5 377857 Protect It! Surge Protector, 7-outlets, 12ft cord $7.95 $39.75
3 154825 10 Ft. Universal AC Power Extension @ $5.57 $16.71
2 7499035/HP ProCurve Switch 1400-8G, 8-Ports/$68.95/$137.90
1 6135184/Linksys Wireless G Broadband Router, Linux Version/$69.95/$69.95
5 462901 Enhanced 350 FastCAT 5e UTP Crossover Cable, 7' Gray $1.19 $5.95
5 318853 1000BaseTX Cat6 UTP 500MHz Gigabit Ethernet Patch Cable, 25' Gray, $8.07 $40.35
5 318856 1000BaseTX Cat6 UTP 500MHz Gigabit Ethernet Patch Cable, 3' Blue, $2.53/ea $12.65
5 318858 1000BaseTX Cat6 UTP 500MHz Gigabit Ethernet Patch Cable, 10' Blue, $3.48/ea $17.40
5 417517 1000BaseTX Cat6 UTP 500MHz Gigabit Ethernet Patch Cable, 5' Blue, $3.03/ea $15.15
1 422654 HP OfficeJet 6210 All-In-One $188.73
1 467301 HP JetDirect 175x $155.22
3 383323 HP 94 Black Inkjet Print Cartridges $16.64/ea $49.92
3 256372 HP 95 Tri-Color Inkjet Print Cartridges $20.15/ea $60.45
10 5726935 USB 2.0 to DB9M Serial Dongle Converter $13.95/ea $139.50
1 5127457 PolyCom V500 IP-Only $1513.20
1 Digital Projector (Model to be updated shortly)

less cable
110/240V
more robust networking

** Reference Books**
books missing ...
Purchase through Amazon.com
"Programming and Customizing the AVR Microcomputer", Dhananjay Gadre ISBN:007134666X
"Practical Electronics for Inventors", Paul Scherz ISBN:0070580782
"Electric Motors and Their Controls: An Introduction", Tak Kenjo ISBN:0198562403
"Electric Motors and Control Techniques", Irving M. Gottleib ISBN:0070240124
"Knoppix Hacks", Kyle Rankin ISBN:0596007876
"Analog Interfacing to Embedded Microprocessor Systems", Stuart Ball ISBN:0750677236
"Linux Cookbook", Carla Schroder ISBN:0596006403
"AVR: An Introductory Course", John Morton ISBN:0750656352
"Handbook of Modern Sensors: Physics, Designs and Applications", Jacob Fraden ISBN:0387007504
"Precision Machine Design", Alexander Slocum ISBN:0872634922
"The Art of Electronics", Paul Horowitz, Winfield Hill ISBN:0521370957
"Learning Python, Second Edition", Mark Lutz, David Ascher ISBN:0596002815
"Python in a Nutshell", Alex Martelli ISBN:0596001886
"The Official Blender 2.3 Guide: Free 3D Creation Guide for Modeling, Animation and Rendering", Ton Roosendahl, Stefano Selleri ISBN:1593270410
"Building Scientific Apparatus", John Moore, et al. ISBN:0813340063
"The Electronics Handbook", Jerry C. Whittaker ISBN:0849383455
"Linux for Dummies" ISBN:0764579371

microscopy

PCs We usally order one computer per fabrication machine, and
then add a few extras for design time off of the machines. So if you
have a Modela, a Camm and a Laser Cutter, we would suggest you buy 5
computers. But you can get by with 3 computers if you need to.)

OptiPlex 755 Ultra Small Form Factor
Intel Core Duo Processor E6550 (2.33GHz, 4M, VT, 1333MHz FSB)
2GB DDR2 Non-ECC SDRAM,667MHz, (2 DIMM)
Integrated Video, Intel GMA3100
DVI-to-VGA Video Adapter Cable
New Dell USB 2-Button Optical Mouse with Scroll, Black
250GB SATA 3.0Gb/s and 8MB DataBurst Cache
24X Slimline CDRW/DVD Combo, Cyberlink Power DVD
Internal Speaker Option
Price $844.56

monitors
17 inch flat panels
approx $350.00 also from Dell

LCD projector for teaching and conferencing
http://pcconnection.com
In-Focus LP70+ DLP Projector $1,149.00
-> benq

Teleconferencing Unit (for those who need it)
MONITOR:
http://www.vfmstore.com/tv.htm#85843
Model No. 858-43 8" color LCD TV $239.00
or if available try this one--cheaper!
http://www.radioshack.com
Axion LCD-801C 8" LCD TV Pt.#2106539 $189.99
UNIT FOR TELECONFERENCE (IP):
http://www.pcconnection.com
5127457 Polycom, Inc. V500 IP-only $1,455.00

to add welding:

Grainger Welding Supply
http://www.grainger.com

3 Economy Ear Muff, Noise Reduction Rating 23 dB, Dielectric, Foam Padded Ear
Cushions, Color Yellow/Black CONDOR 1VT65 1 Today $6.62ea $19.86
3 Endmill, High Speed Steel 3/16 Inch Ball Single End CC 3/8 Inch Shank 1/2
Inch Lock 2 Flute PUTNAM 94321 $6.58ea $19.74
1 Heavy Duty Multi Purpose Rubber Air Hose, Inside Diameter 1/4 Inch, OD
0.500 Inch, Fitting Size 1/4 NPT, Pressure Range 250 PSI, Color Red, Length
25 Feet, DAYTON 1Z666 $16.19ea $16.19
2 Welding Wire, Diameter 0.030 Inch, 2 Pounds per Spool, E71T-GS Flux Cored
MIG ESAB CORESHIELD 242201838 $17.64ea $35.28
1 Grinding Wheel Dresser, Diameter 1 1/4 Inches, Length 8 1/2 Inches
DAYTON 2X951 1 $7.55ea $7.55
1 Heavy Duty Multi Purpose Rubber Air Hose, Inside Diameter 1/4 Inch, OD
0.500 Inch, Fitting Size 1/4 Inch MNPT, Pressure Range 250 PSI, Color Red,
Length DAYTON 2Z010 $25.20ea $25.20
1 Crimped Wheel Brush, Diameter 6 Inches, Wire Size 0.0118 Inch, Maximum
Speed 6000 RPM, Arbor Hole 5/8-1/2 Inch, Face Width 3/4 Inch, Narrow
Brush Face, WEILER 01065 $13.22ea $13.22
1 Variable Speed Rotary Tool, 5,000 To 35,000 RPM, 1.15 Amps @ 120 Volts,
Tool Weight 1 Pound, Tool Length 8 Inches Long, Includes 77 Accessories,
Garden DREMEL 3956-02 $79.00ea $79.00
1 Router, Power Rating 1 3/4 HP, Current @ 120 VAC 10 Amps, No Load Speed
23000 RPM, Power Source AC, Switch Rocker, Tool Length 8 Inches, Tool
Weight 8 PORTER CABLE 690LR $164.48ea $164.48
1 High Speed Steel Router Bit Set, Number of Pieces 6, Includes 1/4, 3/8 and
1/2 Inch Straight Bits, 1/4 Inch Veining, 3/8 Inch Corner Rounding and 3/8
Inch MAGNA 83101 $25.79ea $25.79
3 Mig/Tig Welding Glove, Size Large, Grain Pigskin, 4 In Split Leather Cuff, Pair
CONDOR 4JF94 $7.14ea $21.42
3 Mig/Tig Welding Glove, Size Medium, Grain Pigskin, 4 In Split Leather Cuff,
Pair CONDOR 4JF95 $7.14ea $21.42
1 Fold-Up Hex Key Set Combo Pack, Number of Pieces 5, Sizes Included
1.5,2.0,2.5,3.0,4.0,5.0,6.0,8.0,10.0 Metric, T8, T10, T15, T20, T25, T27,
T30,T40 Torx, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16,
7/32, 1/4,5/16,3/8 EKLIND 25036 $29.43ea $29.43
3 Super Slim Super Tuff Welding Helmet, Plate Size 2 x 4 1/4 Inches, Lift Front
Plate Retainer, Ratchet Headgear, Thermo Plastic Resin SELLSTROM
29301-10 $32.67ea $98.01
1 Wire Feed MIG Welder, Rated Output 90A @19VDC, Input 115 V, Input 20
Amps, Phase 1, OCV 29, 60 Hz, Shielding Gas Ar2, C25, Wire Size
0.023/0.025/0.030/0.035, HOBART CORPORATION 500487 $362.70
3 Pneumatic Coupler Body, Type Sleeve, Quick Coupler, Body Size 1/4 Inch,
Connection Size 3/8 Inch FNPT, Used on End of Hose or Pipe, Zinc Plated
Steel, DYNAQUIP D360 $4.90ea $14.70
3 Pneumatic Coupler Plug, Body Size 1/4 Inch, Connection Size 3/8 Inch FNPT,
Zinc Plated Steel DYNAQUIP P360 $2.68ea $8.04
1 SAE/Metric Box End Wrench Set, 14 Pieces, Includes Size 1/4 x 5/16, 3/8 x
7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 13/16, 3/4 x 7/8 Inch,
6 x WESTWARD 4YR23 $48.98ea $48.98
1 Locking Pliers Set, 3 Pieces, 5 and 10 Inch Curved Jaw, 6 1/2 Inch Long Nose
Jaw WESTWARD 4YR96 $22.25ea $22.25
1 Heavy Duty Bench Grinder, Wheel Diameter 6 Inches, Power Rating 1/3 HP,
Maximum Speed 3450 RPM, Arbor Wheel 1/2 Inch, Current Rating 3.5 Amps,
Single Phase DAYTON 4Z672E $119.93ea $119.93
6 Light Duty Bar Clamp, Load Capacity 600 Pounds, Opening 12 Inches, Throat
Depth 2 1/2 Inches, Bar Thickness 1/4 Inch, Swivel Pad 3/4 Inch, Width 3/4
Inch, WILTON 42912 $5.66ea $33.96
1 Welding/Chip Hammer, Handle Type Steel with Vinyl Grip, Head Weight 14
Ounces, Face Smooth ESTWING E3-WC $18.32ea $18.32
1 Ball End Hex Screwdriver Set, 13 Pieces, Blade Length 4 to 6 Inches, Included
0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16,
3/8 EKLIND 90113 $32.94ea $32.94
1 Ergo File Set, Number of Pieces 5, Type General Purpose, With Pouch
NICHOLSON 22040H $39.56ea $39.56
3 Bib Apron, Size 24 x 36 Inches, Protective Leather, Thread, Premium Cowhide
CONDOR 5T179A $19.63ea $58.89
1 Disposable Ear Plug, Without Cord, NRR 28 dB, Material Foam, Bell Shaped

to add plasma cutting:

Torchmate
http://www.torchmate.com/
Purchased through Applied Robotics*
1 Torchmate Small Shop Machine $9,995.00
Torchmate CAD
Torchmate Machine Interface for Router
Motor Cables
Slat Support Brackets
Ugraded Gear Rack
Physical Z-Axis $1,899.95
Cable Carrier System $324.48
total: $12,219.43
optionally:
Thermal Dynamics Cutmaster 101 Plasma Cutter w/Machine Torch and
Torchmate AVC Modification $2,685.00
Arc Voltage Torch Height Control $2,399.95
*Be sure to specify Voltage, Hz and Amps required (e.g. 220V, 50Hz, 15 Amps)

← Older revision		Revision as of 20:13, 18 April 2011
Line 1:		Line 1:
	{{~~Category=~~Digital Fabrication}}		{{Breadcrumb\|Digital Fabrication}}
	Fab Lab Inventory		Fab Lab Inventory
	3/24/08		3/24/08

← Older revision		Revision as of 22:17, 7 February 2011
Line 1:		Line 1:
			{{Category=Digital Fabrication}}
	Fab Lab Inventory		Fab Lab Inventory
	3/24/08		3/24/08

← Older revision		Revision as of 17:40, 13 July 2008
Line 1:		Line 1:
	Fab Lab Inventory		Fab Lab Inventory
	3/24/08		3/24/08
			from http://fab.cba.mit.edu/about/fab/inv.html

	='''Epilog Laser'''=		='''Epilog Laser'''=

MIT Fab Lab item list - Revision history

Conor at 20:13, 18 April 2011

Conor at 22:17, 7 February 2011

WikiSysop at 17:40, 13 July 2008

WikiSysop at 17:13, 13 July 2008

WikiSysop at 17:07, 13 July 2008

WikiSysop: New page: Fab Lab Inventory 3/24/08 Epilog Laser http://www.epiloglaser.com/ Mini 24" x 12" 35W laser cutter Depending on where you are in the world, you can buy one of these for $16,000-$20,000U...