OSE Chapter Training Calendar - Revision history

Marcin: /* Builds Schedule - 3D Printer */

2021-02-23T13:08:39Z

Builds Schedule - 3D Printer

← Older revision		Revision as of 13:08, 23 February 2021
Line 24:		Line 24:
	The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life. This is a suggested schedule only and is subject to change based on the needs of both parties and progress made. The schedule should allow ample time for completion, but if more time is needed, then some parts may not be covered. The entire program must fit in the allotted training program duration of 1-2 years as selected intitially during the application phase. In the case of any extraordinary events, such as national emergency, natural catastrophe, war, disease outbreak, or any event that prevents normal progress - the training duration will simply be extended to cover the missed time.		The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life. This is a suggested schedule only and is subject to change based on the needs of both parties and progress made. The schedule should allow ample time for completion, but if more time is needed, then some parts may not be covered. The entire program must fit in the allotted training program duration of 1-2 years as selected intitially during the application phase. In the case of any extraordinary events, such as national emergency, natural catastrophe, war, disease outbreak, or any event that prevents normal progress - the training duration will simply be extended to cover the missed time.

	#Work plan - creating an editable, updatable work plan with milestones based on a Critical Path template.		#Work plan - creating an editable, updatable work plan with milestones based on a [[Critical Path]] template. This is an agile planning method which allows for continuous updates of the plan throughout the duration of the year.
	#Collaborative literacy - how to collaborate on a large scale by publishing early and often, and what tools to use		#Collaborative literacy - how to collaborate on a large scale by publishing early and often, and what tools to use
	#FreeCAD design and merge workflow. Part library creation.		#FreeCAD design and merge workflow. Part library creation.

Marcin: /* General */

2021-02-23T13:00:54Z

General

← Older revision		Revision as of 13:00, 23 February 2021
Line 14:		Line 14:
	=Curriculum=		=Curriculum=
	==General==		==General==
	Work focuses on hands-on development, which will be at least 50% of the learning time. For the weekly meeting with the instructor - prior reading materials are reviewed before the meeting. Each meeting starts with a 5 minute assessment or exam of last week's learnings, discussion of that work's week, and ends with a preview to next week's content. Work focuses on FreeCAD design followed by build for any of the development items. Typically, we work with existing designs in FreeCAD, we redesign/upgrade them, and prototype the new design. At all times, we decide on where to freeze the designs vs make improvements. The trainee is involved in learning the ropes, while making small improvements and contributions to the work.		Work focuses on hands-on development, which will be at least 50% of the learning time. For the weekly meeting with the instructor - prior reading materials are reviewed before the meeting. Each meeting starts with a 5 minute assessment or exam of last week's learnings, discussion of that work's week, and ends with a preview to next week's content. Work focuses on FreeCAD design followed by build for any of the development items. Typically, we work with existing designs in FreeCAD, we redesign/upgrade them, and prototype the new design. At all times, we decide on where to freeze the designs vs make improvements. The trainee is involved in learning the ropes, while making small improvements and contributions to the work. There is a lot of flexibility in the program, depending on the needs of the student.

	==Development Process==		==Development Process==
	Each week also involves continuing training in [[OSE Specification]] and [[OSE Development Protocol]]. We will continue delving into [[OSE Specifications]] on a point-by-point basis - until the student can demonstrate a good understanding of applying each specification point to actual designs as the program moves forward. We will frequently discuss, 'how does this design feature meet specification X?'. In a similar fashion, we will continue to iron out the collaborative development protocols of the OSE Development Protocol - focusing on the 40 items of the product development template, and 20 items of the enterprise development template.		Each week also involves continuing training in [[OSE Specification]] and [[OSE Development Protocol]]. We will continue delving into [[OSE Specifications]] on a point-by-point basis - until the student can demonstrate a good understanding of applying each specification point to actual designs as the program moves forward. We will frequently discuss, 'how does this design feature meet specification X?'. In a similar fashion, we will continue to iron out the collaborative development protocols of the OSE Development Protocol - focusing on the 40 items of the product development template, and 20 items of the enterprise development template.

Marcin: /* Application */

2021-02-23T12:58:48Z

Application

← Older revision		Revision as of 12:58, 23 February 2021
Line 1:		Line 1:
	=Application=		=Application=

	The time until beginning of training can be between 6-12 weeks, depending on pace of progress. Applications are accepted on a rolling basis. The weekly schedule may look like:		The time until beginning of training can be between a few to 12 weeks, depending on pace of progress. Applications are accepted on a rolling basis. The weekly schedule may look like:

	#Video of Interest		#Video of Interest
Line 8:		Line 8:
	#Sponsor is identified for funding the Chapter, and funding is secured. This step can take several weeks.		#Sponsor is identified for funding the Chapter, and funding is secured. This step can take several weeks.
	#Enterprise mentor is recruited		#Enterprise mentor is recruited
	#Workshop space is secured for 2 years, about 100 square meters minimum.		#Workshop space is secured for 2 years, about 25-100 square meters minimum depending on project chosen.
	#Payment is made to OSE		#Payment is made to OSE
	#Kickoff meeting - program beginning.		#Kickoff meeting - program beginning.

Marcin: /* Builds Schedule - Seed Home 2 */

2021-02-23T12:44:58Z

Builds Schedule - Seed Home 2

← Older revision		Revision as of 12:44, 23 February 2021
Line 69:		Line 69:
	==Builds Schedule - Seed Home 2==		==Builds Schedule - Seed Home 2==
	This schedule will be decided upon collaboratively with the applicant. We may start with 3D Printing for Construction, some heavy equipment, or we can start directly in housing.		This schedule will be decided upon collaboratively with the applicant. We may start with 3D Printing for Construction, some heavy equipment, or we can start directly in housing.

			==Other Projects==
			For any other projects, a custom program will be drawn up collaboratively.

Marcin: /* Builds Schedule - Seed Home 2 */

2020-10-30T18:23:53Z

Builds Schedule - Seed Home 2

← Older revision		Revision as of 18:23, 30 October 2020
Line 68:		Line 68:

	==Builds Schedule - Seed Home 2==		==Builds Schedule - Seed Home 2==
	This schedule will be decided upon collaboratively with the applicant. We may start with [[3D Printing for Construction]], some heavy equipment, or we can start directly in housing.		This schedule will be decided upon collaboratively with the applicant. We may start with 3D Printing for Construction, some heavy equipment, or we can start directly in housing.

Marcin: /* Builds Schedule */

2020-10-30T18:23:40Z

Builds Schedule

← Older revision		Revision as of 18:23, 30 October 2020
Line 20:		Line 20:
	There will be ample time throughout the 1-2 years to engage in collaborative design activity where students/collaborators gain significant exposure to large-scale, collaborative development protocols. The intended outcome is that the collaborator becomes comfortable with leading design and development work - guiding others in learning the process.		There will be ample time throughout the 1-2 years to engage in collaborative design activity where students/collaborators gain significant exposure to large-scale, collaborative development protocols. The intended outcome is that the collaborator becomes comfortable with leading design and development work - guiding others in learning the process.

	==Builds Schedule==		==Builds Schedule - 3D Printer==
	The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life. This is a suggested schedule only and is subject to change based on the needs of both parties and progress made. The schedule should allow ample time for completion, but if more time is needed, then some parts may not be covered. The entire program must fit in the allotted training program duration of 1-2 years as selected intitially during the application phase. In the case of any extraordinary events, such as national emergency, natural catastrophe, war, disease outbreak, or any event that prevents normal progress - the training duration will simply be extended to cover the missed time.		The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life. This is a suggested schedule only and is subject to change based on the needs of both parties and progress made. The schedule should allow ample time for completion, but if more time is needed, then some parts may not be covered. The entire program must fit in the allotted training program duration of 1-2 years as selected intitially during the application phase. In the case of any extraordinary events, such as national emergency, natural catastrophe, war, disease outbreak, or any event that prevents normal progress - the training duration will simply be extended to cover the missed time.

Line 63:		Line 63:
	#The last 3 months are dedicated to a final development project, based on agreed-upon priorities for achieving success as a Chapter. This may be a technology prototyping or a documentation/edu-marketing project		#The last 3 months are dedicated to a final development project, based on agreed-upon priorities for achieving success as a Chapter. This may be a technology prototyping or a documentation/edu-marketing project
	#Weeks 40-50 are discressionary - covering any time overruns on other weeks in addition to work on the final project		#Weeks 40-50 are discressionary - covering any time overruns on other weeks in addition to work on the final project

			==Builds Schedule - Tractors and Heavy Equipment==
			The schedule is analogous to the 3D printer curriculum, but starts with the CNC Torch Table, tractor, microtractor, and other equipment as needed.

			==Builds Schedule - Seed Home 2==
			This schedule will be decided upon collaboratively with the applicant. We may start with [[3D Printing for Construction]], some heavy equipment, or we can start directly in housing.

Marcin: /* Builds Schedule */

2020-08-13T13:42:50Z

Builds Schedule

← Older revision		Revision as of 13:42, 13 August 2020
Line 21:		Line 21:

	==Builds Schedule==		==Builds Schedule==
	The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life.		The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life. This is a suggested schedule only and is subject to change based on the needs of both parties and progress made. The schedule should allow ample time for completion, but if more time is needed, then some parts may not be covered. The entire program must fit in the allotted training program duration of 1-2 years as selected intitially during the application phase. In the case of any extraordinary events, such as national emergency, natural catastrophe, war, disease outbreak, or any event that prevents normal progress - the training duration will simply be extended to cover the missed time.

	#Work plan - creating an editable, updatable work plan with milestones based on a Critical Path template.		#Work plan - creating an editable, updatable work plan with milestones based on a Critical Path template.

Marcin: /* Builds Schedule */

2020-07-21T22:12:01Z

Builds Schedule

← Older revision		Revision as of 22:12, 21 July 2020
Line 60:		Line 60:
	#From here on, this is the track that is done only if we have completed all of the above. CNC Cicuit Mill - design		#From here on, this is the track that is done only if we have completed all of the above. CNC Cicuit Mill - design
	#Quality control procedures for distributed quality control		#Quality control procedures for distributed quality control
			#[[3D Printer Design for Manufacturing]]
	#The last 3 months are dedicated to a final development project, based on agreed-upon priorities for achieving success as a Chapter. This may be a technology prototyping or a documentation/edu-marketing project		#The last 3 months are dedicated to a final development project, based on agreed-upon priorities for achieving success as a Chapter. This may be a technology prototyping or a documentation/edu-marketing project
	#Weeks 40-50 are discressionary - covering any time overruns on other weeks in addition to work on the final project		#Weeks 40-50 are discressionary - covering any time overruns on other weeks in addition to work on the final project

Marcin: /* Builds Schedule */

2020-07-02T15:48:56Z

Builds Schedule

← Older revision		Revision as of 15:48, 2 July 2020
Line 61:		Line 61:
	#Quality control procedures for distributed quality control		#Quality control procedures for distributed quality control
	#The last 3 months are dedicated to a final development project, based on agreed-upon priorities for achieving success as a Chapter. This may be a technology prototyping or a documentation/edu-marketing project		#The last 3 months are dedicated to a final development project, based on agreed-upon priorities for achieving success as a Chapter. This may be a technology prototyping or a documentation/edu-marketing project
	#Weeks 40-50 are discressionary - covering any time overruns on other weeks		#Weeks 40-50 are discressionary - covering any time overruns on other weeks in addition to work on the final project

Marcin: /* Work */

2020-07-02T15:48:19Z

Work

← Older revision		Revision as of 15:48, 2 July 2020
Line 12:		Line 12:
	#Kickoff meeting - program beginning.		#Kickoff meeting - program beginning.

	=~~Work~~=		=Curriculum=
			==General==
	Work focuses on hands-on development, which will be at least 50% of the learning time. For the weekly meeting with the instructor - prior reading materials are reviewed before the meeting. Each meeting starts with a 5 minute assessment or exam of last week's learnings, discussion of that work's week, and ends with a preview to next week's content. Work focuses on FreeCAD design followed by build for any of the development items. Typically, we work with existing designs in FreeCAD, we redesign/upgrade them, and prototype the new design. At all times, we decide on where to freeze the designs vs make improvements. The trainee is involved in learning the ropes, while making small improvements and contributions to the work.		Work focuses on hands-on development, which will be at least 50% of the learning time. For the weekly meeting with the instructor - prior reading materials are reviewed before the meeting. Each meeting starts with a 5 minute assessment or exam of last week's learnings, discussion of that work's week, and ends with a preview to next week's content. Work focuses on FreeCAD design followed by build for any of the development items. Typically, we work with existing designs in FreeCAD, we redesign/upgrade them, and prototype the new design. At all times, we decide on where to freeze the designs vs make improvements. The trainee is involved in learning the ropes, while making small improvements and contributions to the work.
			==Development Process==
	Each week also involves continuing training in [[OSE Specification]] and [[OSE Development Protocol]]. We will continue delving into [[OSE Specifications]] on a point-by-point basis - until the student can demonstrate a good understanding of applying each specification point to actual designs as the program moves forward. We will frequently discuss, 'how does this design feature meet specification X?'. In a similar fashion, we will continue to iron out the collaborative development protocols of the OSE Development Protocol - focusing on the 40 items of the product development template, and 20 items of the enterprise development template.		Each week also involves continuing training in [[OSE Specification]] and [[OSE Development Protocol]]. We will continue delving into [[OSE Specifications]] on a point-by-point basis - until the student can demonstrate a good understanding of applying each specification point to actual designs as the program moves forward. We will frequently discuss, 'how does this design feature meet specification X?'. In a similar fashion, we will continue to iron out the collaborative development protocols of the OSE Development Protocol - focusing on the 40 items of the product development template, and 20 items of the enterprise development template.
			==Collaboration==
	There will be ample time throughout the 1-2 years to engage in collaborative design activity where students/collaborators gain significant exposure to large-scale, collaborative development protocols. The intended outcome is that the collaborator becomes comfortable with leading design and development work - guiding others in learning the process.		There will be ample time throughout the 1-2 years to engage in collaborative design activity where students/collaborators gain significant exposure to large-scale, collaborative development protocols. The intended outcome is that the collaborator becomes comfortable with leading design and development work - guiding others in learning the process.

	The weekly technical learning schedule is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life.		==Builds Schedule==
			The weekly, hands-on, technical learning schedule (outside of OSE Specifications and OSE Development Protocol lessons, is as follows. Each week will involve work on different steps of the [[OSE Collaboration Protocol]], while learning to build things in real life.

	#Work plan - creating an editable, updatable work plan with milestones based on a Critical Path template.		#Work plan - creating an editable, updatable work plan with milestones based on a Critical Path template.