Open Source Face Sheild - Revision history

Eric: Created a redirect to a similarly named page

2020-03-24T22:21:22Z

Created a redirect to a similarly named page

← Older revision		Revision as of 22:21, 24 March 2020
Line 1:		Line 1:
	~~=Basics=~~		#REDIRECT [[Open Source Face Shield]]
	*Either an open source head mount for a plate, or a design integrating both the mount, and a custom transparent face sheild plate
	*The head mount should be all or nearly all 3D Printed
	*The Transparent Plate should be off the shelf, or a Precious Plastic compression or injection molded part from shredded disposable water bottles (PET)
	*Also need to check plastic compatability with disenfectants, and compliance etc
	*Could be developed in the future for fume and/or welding use

	~~=Industry Standards=~~
	*

	~~=Existing Open Source Designs=~~
	*[https://www.youtube.com/watch?v=pP7z3iw76GA A Desing Mentioned By Prusa] - basic headmount, uses a pre-produced plate

	~~=Minimum Viable Product=~~
	*Comfotable enough for all work-day use
	*Adjustable head Mount
	*The Plate should cover forehead to chin
	*The plate should be transparent
	*The device should be secure in a similar manner to a hard hat (doesn't need shock protection etc, but should not come loose comprimising it's use)
	*Preferably only the head clamp mechanism(s) (ie no chin strap to avoid needs for other materials such as fabric and/or rope
	*Should be able to be disinfected with standard hospital agents without damage

	~~=Basic Design=~~
	~~==Head Mount==~~
	*[[Open Source ~~Universal Head Mount Mechanism]~~]
	*Or a VERY simple single belt (TPU, or thin PLA? need to fiddle around to solve flexability) depending on end use (HIGH quality + comfort or just "get it done" level)

	~~=CAD=~~
	*

	~~=BOM=~~
	*Should use only standard 3D Printing Filaments for the head mount (Preferabbly PLA or ABS, perhaps others if needed, also perhaps screws etc if needed although this is undesirable in emergencies)

	~~=See Also=~~
	*

	~~=Useful Links=~~
	*[https://en.wikipedia.org/wiki/Face_shield The Wikipedia Page on Face Sheilds]

Eric: Added some more links under the "Existing Open Source Designs" section

2020-03-19T16:51:38Z

Added some more links under the "Existing Open Source Designs" section

← Older revision		Revision as of 16:51, 19 March 2020
Line 10:		Line 10:

	=Existing Open Source Designs=		=Existing Open Source Designs=
	*		*[https://www.youtube.com/watch?v=pP7z3iw76GA A Desing Mentioned By Prusa] - basic headmount, uses a pre-produced plate

	=Minimum Viable Product=		=Minimum Viable Product=

Eric: Created Page + Added Basic Sections/Info

2020-03-19T16:17:58Z

Created Page + Added Basic Sections/Info

New page

=Basics=
*Either an open source head mount for a plate, or a design integrating both the mount, and a custom transparent face sheild plate
*The head mount should be all or nearly all 3D Printed
*The Transparent Plate should be off the shelf, or a Precious Plastic compression or injection molded part from shredded disposable water bottles (PET)
*Also need to check plastic compatability with disenfectants, and compliance etc
*Could be developed in the future for fume and/or welding use

=Industry Standards=
*

=Existing Open Source Designs=
*

=Minimum Viable Product=
*Comfotable enough for all work-day use
*Adjustable head Mount
*The Plate should cover forehead to chin
*The plate should be transparent
*The device should be secure in a similar manner to a hard hat (doesn't need shock protection etc, but should not come loose comprimising it's use)
*Preferably only the head clamp mechanism(s) (ie no chin strap to avoid needs for other materials such as fabric and/or rope
*Should be able to be disinfected with standard hospital agents without damage

=Basic Design=
==Head Mount==
*[[Open Source Universal Head Mount Mechanism]]
*Or a VERY simple single belt (TPU, or thin PLA? need to fiddle around to solve flexability) depending on end use (HIGH quality + comfort or just "get it done" level)

=CAD=
*

=BOM=
*Should use only standard 3D Printing Filaments for the head mount (Preferabbly PLA or ABS, perhaps others if needed, also perhaps screws etc if needed although this is undesirable in emergencies)

=See Also=
*

=Useful Links=
*[https://en.wikipedia.org/wiki/Face_shield The Wikipedia Page on Face Sheilds]