Quarter Inch Stock Tubing - Revision history

Marcin at 16:19, 5 April 2021

2021-04-05T16:19:22Z

← Older revision		Revision as of 16:19, 5 April 2021
Line 1:		Line 1:
	=Introduction=		=Introduction=
	The Quarter Inch Stock Tubing is 4x4" square tubing with a 1/4" wall - used as the structural backbone for OSE machines. So far, tractors, backhoes, ironworker, CNC torch table frame, trencher, and trailer have been prototyped using the tubing. This is useful whenever a solid structure is needed - and for heavier applications, 1/2" wall tubing of the same size is used. Such as last year on bulldozer rototype and ironworker machine.		The Quarter Inch Stock Tubing is 4x4" square tubing with a 1/4" wall - used as the structural backbone for OSE machines. So far, tractors, backhoes, ironworker, CNC torch table frame, trencher, and trailer have been prototyped using the tubing. This is useful whenever a solid structure is needed - '''and for heavier applications, 1/2" wall tubing of the same size is used'''. Such as last year on bulldozer rototype and ironworker machine.

	The perforations (holes) allow the use of 1" bolts. Holes are oversized by 1/16" to allow easier bolt fit.		The perforations (holes) allow the use of 1" bolts. Holes are oversized by 1/16" to allow easier bolt fit.

Marcin at 07:59, 26 April 2016

2016-04-26T07:59:15Z

← Older revision		Revision as of 07:59, 26 April 2016
Line 1:		Line 1:
			=Introduction=
			The Quarter Inch Stock Tubing is 4x4" square tubing with a 1/4" wall - used as the structural backbone for OSE machines. So far, tractors, backhoes, ironworker, CNC torch table frame, trencher, and trailer have been prototyped using the tubing. This is useful whenever a solid structure is needed - and for heavier applications, 1/2" wall tubing of the same size is used. Such as last year on bulldozer rototype and ironworker machine.

			The perforations (holes) allow the use of 1" bolts. Holes are oversized by 1/16" to allow easier bolt fit.

	=FreeCAD Tubing Library=		=FreeCAD Tubing Library=
	These are individual FreeCAD files. Intended workflow is Merge in the file menu to add these parts to a document in FreeCAD.		These are individual FreeCAD files. Intended workflow is Merge in the file menu to add these parts to a document in FreeCAD.

Marcin at 07:55, 26 April 2016

2016-04-26T07:55:20Z

← Older revision		Revision as of 07:55, 26 April 2016
Line 4:		Line 4:
	[[File:FreeCAD Tubing Library.tar.gz]]		[[File:FreeCAD Tubing Library.tar.gz]]

	[[Image:tubing screenshot.jpg\|thumb\|Sample tubing from the tubing library. This is a representation of stock USA 4" steel. This is drawn as blocks with holes (no rounded corners or wall) to optimize rapid manipulation for more complex designs. Added April 25, 2016]].		[[Image:tubing screenshot.jpg\|thumb\|Sample tubing from the tubing library. This is a representation of stock USA 4" steel. This is drawn as blocks with holes (no rounded corners or wall) to optimize rapid manipulation for more complex designs. Compoariso of fully accurate vs. blocky tubing should be performed to see the practical limits before FreeCAD starts bogging down. This is done with complex design in midnd - such as where multiple machines can be manipulated at the same time in one working window. Added April 25, 2016]].

Marcin: /* DXF for CNC Cutting of a 10 Foot Length */

2016-04-26T07:41:09Z

DXF for CNC Cutting of a 10 Foot Length

← Older revision		Revision as of 07:41, 26 April 2016
Line 11:		Line 11:
	[[File:10footstocktube.dxf]]		[[File:10footstocktube.dxf]]

	'''Note: Sketchup work below is outdated as we transition to FreeCAD as the official OSE part library.'''		'''Note: Sketchup work below is outdated as we transition in 2016 to FreeCAD as the official OSE part library format.'''

	=Stock Square Tubing (with Rounded-Corners) =		=Stock Square Tubing (with Rounded-Corners) =
	From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]. Note: tubing with square corners is preferable in Sketchup, as it can be put together much more easily.		From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]. Note: tubing with square corners is preferable in Sketchup, as it can be put together much more easily.

Marcin at 07:35, 26 April 2016

2016-04-26T07:35:02Z

← Older revision		Revision as of 07:35, 26 April 2016
Line 3:		Line 3:

	[[File:FreeCAD Tubing Library.tar.gz]]		[[File:FreeCAD Tubing Library.tar.gz]]

			[[Image:tubing screenshot.jpg\|thumb\|Sample tubing from the tubing library. This is a representation of stock USA 4" steel. This is drawn as blocks with holes (no rounded corners or wall) to optimize rapid manipulation for more complex designs. Added April 25, 2016]].

Marcin at 07:33, 26 April 2016

2016-04-26T07:33:21Z

← Older revision		Revision as of 07:33, 26 April 2016
Line 1:		Line 1:
			=FreeCAD Tubing Library=
			These are individual FreeCAD files. Intended workflow is Merge in the file menu to add these parts to a document in FreeCAD.

			[[File:FreeCAD Tubing Library.tar.gz]]


	=DXF for CNC Cutting of a 10 Foot Length=		=DXF for CNC Cutting of a 10 Foot Length=

	[[File:10footstocktube.dxf]]		[[File:10footstocktube.dxf]]

			'''Note: Sketchup work below is outdated as we transition to FreeCAD as the official OSE part library.'''
	=Stock Square Tubing (with Rounded-Corners) =		=Stock Square Tubing (with Rounded-Corners) =
	From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]. Note: tubing with square corners is preferable in Sketchup, as it can be put together much more easily.		From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]. Note: tubing with square corners is preferable in Sketchup, as it can be put together much more easily.

Marcin at 01:20, 15 August 2013

2013-08-15T01:20:42Z

← Older revision		Revision as of 01:20, 15 August 2013
Line 13:		Line 13:

	<div><html><iframe width="560" height="315" src="//www.youtube.com/embed/UFjAJFr-NRY" frameborder="0" allowfullscreen></iframe></div></html>		<div><html><iframe width="560" height="315" src="//www.youtube.com/embed/UFjAJFr-NRY" frameborder="0" allowfullscreen></iframe></div></html>

			=Links=
			*[[Warehouse]] contains tubing with square corners, not rounded corners - for ease of working in Sketchup.

Marcin: /* Stock Square Tubing (with Rounded-Corners) */

2013-08-15T01:19:56Z

Stock Square Tubing (with Rounded-Corners)

← Older revision		Revision as of 01:19, 15 August 2013
Line 4:		Line 4:

	=Stock Square Tubing (with Rounded-Corners) =		=Stock Square Tubing (with Rounded-Corners) =
	From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]		From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]. Note: tubing with square corners is preferable in Sketchup, as it can be put together much more easily.

	[[File:Warehouse-0714.png\|400px]]		[[File:Warehouse-0714.png\|400px]]

Marcin at 01:16, 14 August 2013

2013-08-14T01:16:29Z

← Older revision		Revision as of 01:16, 14 August 2013
Line 3:		Line 3:
	[[File:10footstocktube.dxf]]		[[File:10footstocktube.dxf]]

	=Stock Square (with Rounded-Corners) ~~Tubing~~=		=Stock Square Tubing (with Rounded-Corners) =
	From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]		From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]

Marcin at 01:16, 14 August 2013

2013-08-14T01:16:11Z

← Older revision		Revision as of 01:16, 14 August 2013
Line 3:		Line 3:
	[[File:10footstocktube.dxf]]		[[File:10footstocktube.dxf]]

	=Stock Square Rounded Tubing=		=Stock Square (with Rounded-Corners) Tubing=
	From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]		From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]