Quick Attach Plate Standard - Revision history

MikeA at 05:16, 11 January 2012

2012-01-11T05:16:00Z

← Older revision		Revision as of 05:16, 11 January 2012
Line 2:		Line 2:

	Present conclusions:		Present conclusions:
			* '''Update:''' (2012-01-11) We are looking at trying to meet the SAE J2513 standard while allowing for smaller implement attachment. Discussion and design is occurring [[LifeTrac_IV_Design_Analysis/QA_plate\| here]]

			Previous conclusions:
	*We would like to have a middle attachment position like at [[LifeTrac#Quick Attach Plate]], so that [[LifeTrac]] could handle small implements, such as the [[universal rotor]]. The SAE J2513 standard has only 2 outer attachments to the skid loader, making the attachment conform to this standard. We do not see a need for making the attachment more complex for small implements that require a '3 point attachment' instead of a		*We would like to have a middle attachment position like at [[LifeTrac#Quick Attach Plate]], so that [[LifeTrac]] could handle small implements, such as the [[universal rotor]]. The SAE J2513 standard has only 2 outer attachments to the skid loader, making the attachment conform to this standard. We do not see a need for making the attachment more complex for small implements that require a '3 point attachment' instead of a
	'4 point attachments.' Thus, we conclude that the SAE J2513 standard does not meet [[OSE Specifications]].		'4 point attachments.' Thus, we conclude that the SAE J2513 standard does not meet [[OSE Specifications]].

Patrick Gibbs: added to Category:LifeTrac

2011-11-04T02:21:11Z

added to Category:LifeTrac

← Older revision		Revision as of 02:21, 4 November 2011
Line 14:		Line 14:

	[[Category:LifeTrac II]]		[[Category:LifeTrac II]]
			[[Category:LifeTrac]]

Chris F at 03:55, 20 September 2011

2011-09-20T03:55:54Z

← Older revision		Revision as of 03:55, 20 September 2011
Line 7:		Line 7:

	Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:		Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:

			==See Also==
			*Multipurpose toolbar

	[[Image:qastandard.jpg]]		[[Image:qastandard.jpg]]

	[[Category:LifeTrac II]]		[[Category:LifeTrac II]]

WikiSysop at 23:03, 23 June 2010

2010-06-23T23:03:51Z

← Older revision		Revision as of 23:03, 23 June 2010
Line 2:		Line 2:

	Present conclusions:		Present conclusions:
	*We would like to have a middle attachment position like at [[LifeTrac#Quick Attach Plate]], so that [[LifeTrac]] could handle small implements, such as the ~~auger~~. The SAE J2513 standard has only 2 outer attachments to the skid loader, making the attachment conform to this standard. We do not see a need for making the attachment more complex for small implements that require a '3 point attachment' instead of a		*We would like to have a middle attachment position like at [[LifeTrac#Quick Attach Plate]], so that [[LifeTrac]] could handle small implements, such as the [[universal rotor]]. The SAE J2513 standard has only 2 outer attachments to the skid loader, making the attachment conform to this standard. We do not see a need for making the attachment more complex for small implements that require a '3 point attachment' instead of a
	'4 point attachments.' Thus, we conclude that the SAE J2513 standard does not meet [[OSE Specifications]].		'4 point attachments.' Thus, we conclude that the SAE J2513 standard does not meet [[OSE Specifications]].
	*To accommodate interchangeability of implements between LifeTrac and non-Factor e Farm industry standards, we recommend an adapter plate SAE J2513 machines to be able to use LifeTrac implements. An adapter for SAE J2513 implements to be used on LifeTrac is a moot point, since open source LifeTrac implements are expected to be much more cost effective compared to the SAE J2513 standard.		*To accommodate interchangeability of implements between LifeTrac and non-Factor e Farm industry standards, we recommend an adapter plate SAE J2513 machines to be able to use LifeTrac implements. An adapter for SAE J2513 implements to be used on LifeTrac is a moot point, since open source LifeTrac implements are expected to be much more cost effective compared to the SAE J2513 standard.

WikiSysop at 23:02, 23 June 2010

2010-06-23T23:02:10Z

← Older revision		Revision as of 23:02, 23 June 2010
Line 1:		Line 1:
	Here we are developing an open source quick attach system for implements on tractors/skid steers of under 9000 lb weight. See former work on the [[LifeTrac#Quick Attach Plate]]		Here we are developing an open source quick attach system for implements on tractors/skid steers of under 9000 lb weight. See former work on the [[LifeTrac#Quick Attach Plate]]

			Present conclusions:
			*We would like to have a middle attachment position like at [[LifeTrac#Quick Attach Plate]], so that [[LifeTrac]] could handle small implements, such as the auger. The SAE J2513 standard has only 2 outer attachments to the skid loader, making the attachment conform to this standard. We do not see a need for making the attachment more complex for small implements that require a '3 point attachment' instead of a
			'4 point attachments.' Thus, we conclude that the SAE J2513 standard does not meet [[OSE Specifications]].
			*To accommodate interchangeability of implements between LifeTrac and non-Factor e Farm industry standards, we recommend an adapter plate SAE J2513 machines to be able to use LifeTrac implements. An adapter for SAE J2513 implements to be used on LifeTrac is a moot point, since open source LifeTrac implements are expected to be much more cost effective compared to the SAE J2513 standard.

	Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:		Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:

WikiSysop at 21:54, 23 June 2010

2010-06-23T21:54:10Z

← Older revision		Revision as of 21:54, 23 June 2010
Line 1:		Line 1:
	See former work on the [[LifeTrac#Quick Attach Plate]]		Here we are developing an open source quick attach system for implements on tractors/skid steers of under 9000 lb weight. See former work on the [[LifeTrac#Quick Attach Plate]]

	Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:		Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:

WikiSysop at 20:31, 23 June 2010

2010-06-23T20:31:43Z

← Older revision		Revision as of 20:31, 23 June 2010
Line 1:		Line 1:
	See former work on the [[LifeTrac#Quick Attach Plate]]		See former work on the [[LifeTrac#Quick Attach Plate]]

			Skid Steer SAE J2513 standard, from discussion [http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html here]:

			[[Image:qastandard.jpg]]

	[[Category:LifeTrac II]]		[[Category:LifeTrac II]]

WikiSysop at 20:28, 23 June 2010

2010-06-23T20:28:02Z

← Older revision		Revision as of 20:28, 23 June 2010
Line 1:		Line 1:
	See former work on the [[LifeTrac#Quick Attach Plate]]		See former work on the [[LifeTrac#Quick Attach Plate]]


			[[Category:LifeTrac II]]

WikiSysop: Created page with 'See former work on the LifeTrac#Quick Attach Plate'

2010-06-23T20:27:41Z

Created page with 'See former work on the LifeTrac#Quick Attach Plate'

New page

See former work on the [[LifeTrac#Quick Attach Plate]]