Rough Door Opening - Revision history

Marcin: /* This is for the Seed Eco-Home */

2023-04-28T21:30:47Z

This is for the Seed Eco-Home

← Older revision		Revision as of 21:30, 28 April 2023
Line 1:		Line 1:
	=This is for the Seed Eco-Home=		=This is for the Seed Eco-Home=
	*With Structure + MEP + Apertures + Other Components Integration - every module is different.
	*Standard double doors that we use have an 80" rough opening height		*Standard double doors that we use have an 80" rough opening height
	*Standard exterior doors that we use have an 82" rough opening height		*Standard exterior doors that we use have an 82" rough opening height

Marcin at 21:28, 28 April 2023

2023-04-28T21:28:35Z

← Older revision		Revision as of 21:28, 28 April 2023
Line 1:		Line 1:
			=This is for the Seed Eco-Home=
			*With Structure + MEP + Apertures + Other Components Integration - every module is different.
			*Standard double doors that we use have an 80" rough opening height
			*Standard exterior doors that we use have an 82" rough opening height
			*2nd floor doors and windows are slightly different because 2nd floor does not rest on a rot-resistant sill plate.
			*Doors are built with their bottom member to facilitate installation - but this member is notched to allow for easy removal after install. It is notched '''from the bottom''' so it can be cut from the top

	=Width=		=Width=
	'''Exterior''' - Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf]. In the Seed Eco-Home, integrating production engineering into the equation we use the standard OBI 39" door opening (universal for doors and windows) for future modification/expansion possibility. We then add a 3/4" spacer as the doors require a 38.25" rough opening. This actually allows the 3 reinforcement spacer blocks on the side of the jack stud to remain as 1.5", so we use standard lumber instead of having to cut a spacer to size. This saves on build time. Extra cost of spacer is offset by ease of future modifications.		'''Exterior''' - Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf]. In the Seed Eco-Home, integrating production engineering into the equation we use the standard OBI 39" door opening (universal for doors and windows) for future modification/expansion possibility. We then add a 3/4" spacer as the doors require a 38.25" rough opening. This actually allows the 3 reinforcement spacer blocks on the side of the jack stud to remain as 1.5", so we use standard lumber instead of having to cut a spacer to size. This saves on build time. Extra cost of spacer is offset by ease of future modifications.

Marcin at 21:12, 28 April 2023

2023-04-28T21:12:55Z

← Older revision		Revision as of 21:12, 28 April 2023
Line 1:		Line 1:
	Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf]. In the Seed Eco-Home, integrating production engineering into the equation we use the standard OBI 39" door opening (universal for doors and windows) for future modification/expansion possibility. We then add a 3/4" spacer as the doors require a 38.25" rough opening. This actually allows the 3 reinforcement spacer blocks on the side of the jack stud to remain as 1.5", so we use standard lumber instead of having to cut a spacer to size. This saves on build time. Extra cost of spacer is offset by ease of future modifications.		=Width=
			'''Exterior''' - Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf]. In the Seed Eco-Home, integrating production engineering into the equation we use the standard OBI 39" door opening (universal for doors and windows) for future modification/expansion possibility. We then add a 3/4" spacer as the doors require a 38.25" rough opening. This actually allows the 3 reinforcement spacer blocks on the side of the jack stud to remain as 1.5", so we use standard lumber instead of having to cut a spacer to size. This saves on build time. Extra cost of spacer is offset by ease of future modifications.

			=Height=
			'''Exterior''' - 82" rough opening

Marcin at 20:24, 28 April 2023

2023-04-28T20:24:40Z

← Older revision		Revision as of 20:24, 28 April 2023
Line 1:		Line 1:
	Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf].		Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf]. In the Seed Eco-Home, integrating production engineering into the equation we use the standard OBI 39" door opening (universal for doors and windows) for future modification/expansion possibility. We then add a 3/4" spacer as the doors require a 38.25" rough opening. This actually allows the 3 reinforcement spacer blocks on the side of the jack stud to remain as 1.5", so we use standard lumber instead of having to cut a spacer to size. This saves on build time. Extra cost of spacer is offset by ease of future modifications.

Marcin: Created page with "Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/414..."

2023-04-28T20:18:24Z

Created page with "Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/414..."

New page

Standard doors such as this [https://www.menards.com/main/doors-windows-millwork/exterior-doors/front-doors/mastercraft-reg-20-minute-primed-steel-6-panel-fire-door-system/4140403/p-1500273187918-c-9356.htm] use a 38.25" opening for a 36" nominal door [https://sp.menardc.com/main/items/media/MWPRE013/Sizing_Guide/STEEL_Inst.pdf].