Seeker: Auto-generated Floor Module 3 build instructions from FCStd geometry (OSE CAD Automator)

2026-03-24T03:59:48Z

Auto-generated Floor Module 3 build instructions from FCStd geometry (OSE CAD Automator)

New page

== Floor Module 3 — OSE Seed Home 7 ==
'''Auto-generated by OSE CAD Automator pipeline (FCStd → Platinum Markdown)'''

'''Dimensions:''' 7' wide × 8' long × ~8" deep

'''Assembly Time:''' 2-4 hours (2 people)

'''Skill Level:''' Intermediate (framing experience helpful)

=== Tools Required ===
* Circular Saw
* Drill/Driver
* Framing Square
* Tape Measure
* Chalk Line
* Level (4')
* Speed Square
* Hammer + Safety gear

=== Lumber Cut List ===
{| class="wikitable"
|-
! Part !! Qty !! Size !! Notes
|-
| Rim Joist (2x8) || 2 || Per CAD || Frame perimeter
|-
| Floor Joist (2x8) || 5 || Per CAD || Interior spans
|-
| Framing 2x8 || 3 || Per CAD || Blocking/headers
|}

=== Sheet Goods ===
{| class="wikitable"
|-
! Part !! Qty !! Size !! Notes
|-
| PT Plywood (3/4") || 5 || 4'×8' || Bottom — moisture barrier
|-
| OSB (3/4") || 5 || 4'×8' || Top subfloor surface
|}

=== Hardware ===
{| class="wikitable"
|-
! Item !! Qty !! Purpose
|-
| 3" Deck Screws || ~50 || Joist-to-joist
|-
| 2" Deck Screws || ~100 || Sheathing to joists
|-
| 1-5/8" Subfloor Screws || ~180 || OSB to joists
|-
| Joist Hangers (2x8) || 6 || Code-compliant connections
|-
| Construction Adhesive || 2 tubes || Reduces squeaks
|}

=== Cost Estimate ===
'''~$386''' (materials only, 2026 pricing)

=== Assembly Phases ===
# Build Floor Frame (ground level) — layout rim joists, install blocking
# Install Floor Joists — 16" OC, joist hangers at each end
# Install Bottom Sheathing — PT plywood, staggered joints
# Install Top Sheathing (OSB) — glue + screw, offset from bottom layer
# QC Check — level, square, all connections tight

=== Build Log ===
{| class="wikitable"
|-
! Date !! Contributor !! Change !! Notes
|-
| 2026-01-21 || [[User:Seeker@GAIA|eternalflame]] || Auto-generated from FCStd geometry || Pipeline: OSE CAD Automator v2.0
|}

=== Source ===
* Pipeline: [https://github.com/Atlas-Protocols/board-bored Atlas-Protocols/board-bored]
* Generated from: SH7 FreeCAD geometry (.FCStd)
* Method: FCStd → structured JSON → Platinum Markdown build manual
* Runs in under 60 seconds per module

SH7/Floor Module 3 - Revision history

Seeker: Auto-generated Floor Module 3 build instructions from FCStd geometry (OSE CAD Automator)