Series vs Parallel Hydraulic Valves - Revision history

Marcin at 19:50, 25 December 2020

2020-12-25T19:50:29Z

← Older revision		Revision as of 19:50, 25 December 2020
Line 1:		Line 1:
			*Summary: unless otherwise specified, assume that the individual spools on a multi-spool hydraulic valve operate in parallel. Note also: this is true for manual valves, but apparently not for solenoid valves - as our experience with 2 spools acting in parallel with the brick press involved increased resistance and bogging down - meaning the flow was in series instead of being divided bewteen different functions.
	*'''The most common circuit is the parallel circuit. In this design, when any one of the spools is shifted, it blocks off the open center passage. Oil then flows into the parallel circuit core, making oil available to all spools. If more than one spool is shifted, the oil will flow to the path of least resistance. When a spool is shifted in tandem, also referred to as a priority circuit, oil is cut off to all downstream sections. Thus, the section nearest to the inlet has priority over the other sections. If more than one spool is shifted, all the oil will go to the section nearest to the inlet.''' - [https://www.mobilehydraulictips.com/from-the-basic-to-advanced-selecting-directional-control-valves/]		*'''The most common circuit is the parallel circuit. In this design, when any one of the spools is shifted, it blocks off the open center passage. Oil then flows into the parallel circuit core, making oil available to all spools. If more than one spool is shifted, the oil will flow to the path of least resistance. When a spool is shifted in tandem, also referred to as a priority circuit, oil is cut off to all downstream sections. Thus, the section nearest to the inlet has priority over the other sections. If more than one spool is shifted, all the oil will go to the section nearest to the inlet.''' - [https://www.mobilehydraulictips.com/from-the-basic-to-advanced-selecting-directional-control-valves/]
	*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]		*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]

Marcin at 19:47, 25 December 2020

2020-12-25T19:47:23Z

← Older revision		Revision as of 19:47, 25 December 2020
Line 1:		Line 1:
			*'''The most common circuit is the parallel circuit. In this design, when any one of the spools is shifted, it blocks off the open center passage. Oil then flows into the parallel circuit core, making oil available to all spools. If more than one spool is shifted, the oil will flow to the path of least resistance. When a spool is shifted in tandem, also referred to as a priority circuit, oil is cut off to all downstream sections. Thus, the section nearest to the inlet has priority over the other sections. If more than one spool is shifted, all the oil will go to the section nearest to the inlet.''' - [https://www.mobilehydraulictips.com/from-the-basic-to-advanced-selecting-directional-control-valves/]
	*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]		*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]
	*Cylinder regeneration mode?		*Cylinder regeneration mode?
	*Is a regular valve series or paralle? Such as [https://www.northerntool.com/shop/tools/product_200314957_200314957?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Hydraulics%20%3E%20Hydraulic%20Valves%20%3E%20Control%20Valves&utm_campaign=Prince&utm_content=20122&gclid=Cj0KCQiAuJb_BRDJARIsAKkycUmvLXBNeTLM2t4HgerYtoISpKD6cZ9WwZIQxwNQHmt8cnxXfbFt9K4aAs6BEALw_wcB&gclsrc=aw.ds]		*Is a regular valve series or paralle? Such as [https://www.northerntool.com/shop/tools/product_200314957_200314957?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Hydraulics%20%3E%20Hydraulic%20Valves%20%3E%20Control%20Valves&utm_campaign=Prince&utm_content=20122&gclid=Cj0KCQiAuJb_BRDJARIsAKkycUmvLXBNeTLM2t4HgerYtoISpKD6cZ9WwZIQxwNQHmt8cnxXfbFt9K4aAs6BEALw_wcB&gclsrc=aw.ds]
	*Reading this implies that all the spools on a single valve operate in parallel [https://www.tractorbynet.com/forums/hydraulics/106783-series-parallel-power-beyond.html]		*Reading this implies that all the spools on a single valve operate in parallel [https://www.tractorbynet.com/forums/hydraulics/106783-series-parallel-power-beyond.html]

Marcin at 19:41, 25 December 2020

2020-12-25T19:41:12Z

← Older revision		Revision as of 19:41, 25 December 2020
Line 2:		Line 2:
	*Cylinder regeneration mode?		*Cylinder regeneration mode?
	*Is a regular valve series or paralle? Such as [https://www.northerntool.com/shop/tools/product_200314957_200314957?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Hydraulics%20%3E%20Hydraulic%20Valves%20%3E%20Control%20Valves&utm_campaign=Prince&utm_content=20122&gclid=Cj0KCQiAuJb_BRDJARIsAKkycUmvLXBNeTLM2t4HgerYtoISpKD6cZ9WwZIQxwNQHmt8cnxXfbFt9K4aAs6BEALw_wcB&gclsrc=aw.ds]		*Is a regular valve series or paralle? Such as [https://www.northerntool.com/shop/tools/product_200314957_200314957?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Hydraulics%20%3E%20Hydraulic%20Valves%20%3E%20Control%20Valves&utm_campaign=Prince&utm_content=20122&gclid=Cj0KCQiAuJb_BRDJARIsAKkycUmvLXBNeTLM2t4HgerYtoISpKD6cZ9WwZIQxwNQHmt8cnxXfbFt9K4aAs6BEALw_wcB&gclsrc=aw.ds]
			*Reading this implies that all the spools on a single valve operate in parallel [https://www.tractorbynet.com/forums/hydraulics/106783-series-parallel-power-beyond.html]

Marcin at 19:33, 25 December 2020

2020-12-25T19:33:44Z

← Older revision		Revision as of 19:33, 25 December 2020
Line 1:		Line 1:
	*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]		*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]
			*Cylinder regeneration mode?
			*Is a regular valve series or paralle? Such as [https://www.northerntool.com/shop/tools/product_200314957_200314957?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Hydraulics%20%3E%20Hydraulic%20Valves%20%3E%20Control%20Valves&utm_campaign=Prince&utm_content=20122&gclid=Cj0KCQiAuJb_BRDJARIsAKkycUmvLXBNeTLM2t4HgerYtoISpKD6cZ9WwZIQxwNQHmt8cnxXfbFt9K4aAs6BEALw_wcB&gclsrc=aw.ds]

Marcin: Created page with "*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]"

2020-12-25T19:30:00Z

Created page with "*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]"

New page

*Series, partial series, parallel - [https://www.hydraulicspneumatics.com/technologies/controls-instrumentation/article/21881106/understanding-parallel-connected-valves]