The Liberator Assembly - Revision history

Elifarley: Text replace - "openfarmtech.org/weblog" to "blog.opensourceecology.org"

2013-07-02T17:32:09Z

Text replace - "openfarmtech.org/weblog" to "blog.opensourceecology.org"

← Older revision		Revision as of 17:32, 2 July 2013
Line 20:		Line 20:
	Below is the old version.		Below is the old version.

	After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://~~openfarmtech~~.org~~/weblog~~/?p=1955 blog]:<br>		After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://blog.opensourceecology.org/?p=1955 blog]:<br>


Line 64:		Line 64:
	# Connect the first solenoid on the left to the main cylinder, using the 6' long hoses. Port B from the valve goes to the bottom port of the main cylinder.		# Connect the first solenoid on the left to the main cylinder, using the 6' long hoses. Port B from the valve goes to the bottom port of the main cylinder.
	#Install the secondary cylinder by putting pins through the attachment eyes - on the secondary arms and on the soil-loading-drawer.		#Install the secondary cylinder by putting pins through the attachment eyes - on the secondary arms and on the soil-loading-drawer.
	#Attach the [http://openfarmtech.org/index.php/File:Sec-cyl-hose-assy.jpg secondary cylinder hose assembly] as shown on the [http://~~openfarmtech~~.org~~/weblog~~/?p=1736#more-1736 blog] to the second solenoid from the left. One plain hose goes directly from the base of the secondary cylinder to port B of the solenoid, and the more complex assembly screws into the rod-end-port of the secondary cylinder, with the opposite end of this hose assembly screwing into port A of the second solenoid.		#Attach the [http://openfarmtech.org/index.php/File:Sec-cyl-hose-assy.jpg secondary cylinder hose assembly] as shown on the [http://blog.opensourceecology.org/?p=1736#more-1736 blog] to the second solenoid from the left. One plain hose goes directly from the base of the secondary cylinder to port B of the solenoid, and the more complex assembly screws into the rod-end-port of the secondary cylinder, with the opposite end of this hose assembly screwing into port A of the second solenoid.
	#Attach the [http://openfarmtech.org/index.php/File:Shaker_motor.jpg grate shaker motor] hoses with the power line connected to port A of the third solenoid. The return line, defined as the line shown in the last picture with the small hose and the needle valve attached to it, connects to port B of the solenoid valve. Use the 6' long hoses. Screw them in first to the shaker motor, where there are no swivels, and then to the valve, where there are swivels. Because the fittings at the shaker motor are not compression fittings, they are the only ones that require the use of thread tape during assembly. Use thread tape going into the shaker motor, and going into the needle valve.		#Attach the [http://openfarmtech.org/index.php/File:Shaker_motor.jpg grate shaker motor] hoses with the power line connected to port A of the third solenoid. The return line, defined as the line shown in the last picture with the small hose and the needle valve attached to it, connects to port B of the solenoid valve. Use the 6' long hoses. Screw them in first to the shaker motor, where there are no swivels, and then to the valve, where there are swivels. Because the fittings at the shaker motor are not compression fittings, they are the only ones that require the use of thread tape during assembly. Use thread tape going into the shaker motor, and going into the needle valve.
	#Attach the electrical connection to the solenoid valves. The longest set of 4 leads go to the first valve (main cylinder) from the left. The second bunch of 4 leads go to the second valve (secondary cylinder), and the last pair of leads goes to the third valve (shaker motor).		#Attach the electrical connection to the solenoid valves. The longest set of 4 leads go to the first valve (main cylinder) from the left. The second bunch of 4 leads go to the second valve (secondary cylinder), and the last pair of leads goes to the third valve (shaker motor).

Bkufa: /* Assembly */

2011-10-26T06:15:30Z

Assembly

← Older revision		Revision as of 06:15, 26 October 2011
Line 14:		Line 14:
	<script type="text/javascript"		<script type="text/javascript"
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1489&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1489&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Installing-the-secondary-cylinder/1489/1">CEB Press Prototype III Assembly- Installing the secondary cylinder</a></p></html>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Installing-the-secondary-cylinder/1489/1">CEB Press Prototype III Assembly- Installing the secondary cylinder</a></p>
			<script type="text/javascript"
			src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1490&site=makeprojects.com">
			</script> <p><a href="http://makeprojects.com/Project/Hard-lining-the-main-cylinder/1490/1">Hard-lining the main cylinder</a></p></html>
	Below is the old version.		Below is the old version.

Bkufa: /* Assembly */

2011-10-26T05:46:10Z

Assembly

← Older revision		Revision as of 05:46, 26 October 2011
Line 11:		Line 11:
	<html><script type="text/javascript"		<html><script type="text/javascript"
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1471&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1471&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1">CEB Press Prototype III Assembly- Soil loading system</a></p></html>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1">CEB Press Prototype III Assembly- Soil loading system</a></p>
			<script type="text/javascript"
			src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1489&site=makeprojects.com">
			</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Installing-the-secondary-cylinder/1489/1">CEB Press Prototype III Assembly- Installing the secondary cylinder</a></p></html>
	Below is the old version.		Below is the old version.

Bkufa: /* Assembly */

2011-10-24T08:06:16Z

Assembly

← Older revision		Revision as of 08:06, 24 October 2011
Line 9:		Line 9:
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>
	<script type="text/javascript"		<html><script type="text/javascript"
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1471&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1471&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1">CEB Press Prototype III Assembly- Soil loading system</a></p>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1">CEB Press Prototype III Assembly- Soil loading system</a></p></html>
	Below is the old version.		Below is the old version.

Bkufa: /* Assembly */

2011-10-24T08:05:54Z

Assembly

← Older revision		Revision as of 08:05, 24 October 2011
Line 9:		Line 9:
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>
			<script type="text/javascript"
			src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1471&site=makeprojects.com">
			</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Soil-loading-system/1471/1">CEB Press Prototype III Assembly- Soil loading system</a></p>
	Below is the old version.		Below is the old version.

Bkufa: /* Assembly */

2011-10-21T06:16:51Z

Assembly

← Older revision		Revision as of 06:16, 21 October 2011
Line 4:		Line 4:
	<html><script type="text/javascript"		<html><script type="text/javascript"
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1437&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1437&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly/1437/1">CEB Press Prototype III Assembly</a></p~~></html~~>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly/1437/1">CEB Press Prototype III Assembly</a></p>
	After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://openfarmtech.org/weblog/?p=1955 blog]:<br>
	<script type="text/javascript"		<script type="text/javascript"
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>
			Below is the old version.

			After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://openfarmtech.org/weblog/?p=1955 blog]:<br>



	~~Below is the old version.~~
	<html>		<html>
	<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1045"></script> <p><a href="http://makeprojects.com/Project/GVCS-CEB-Assembly/1045/1">GVCS - CEB - Assembly</a></p>		<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1045"></script> <p><a href="http://makeprojects.com/Project/GVCS-CEB-Assembly/1045/1">GVCS - CEB - Assembly</a></p>

Bkufa: /* Assembly */

2011-10-21T06:15:55Z

Assembly

← Older revision		Revision as of 06:15, 21 October 2011
Line 8:		Line 8:
	<script type="text/javascript"		<script type="text/javascript"
	src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">		src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p></html>

	Below is the old version.		Below is the old version.

Bkufa: /* Assembly */

2011-10-21T06:15:08Z

Assembly

← Older revision		Revision as of 06:15, 21 October 2011
Line 6:		Line 6:
	</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly/1437/1">CEB Press Prototype III Assembly</a></p></html>		</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly/1437/1">CEB Press Prototype III Assembly</a></p></html>
	After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://openfarmtech.org/weblog/?p=1955 blog]:<br>		After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://openfarmtech.org/weblog/?p=1955 blog]:<br>
			<script type="text/javascript"
			src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1447&site=makeprojects.com">
			</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly-Adjusting-the-drawer/1447/1">CEB Press Prototype III Assembly- Adjusting the drawer</a></p>

			Below is the old version.
	<html>		<html>
	<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1045"></script> <p><a href="http://makeprojects.com/Project/GVCS-CEB-Assembly/1045/1">GVCS - CEB - Assembly</a></p>		<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1045"></script> <p><a href="http://makeprojects.com/Project/GVCS-CEB-Assembly/1045/1">GVCS - CEB - Assembly</a></p>

Bkufa at 06:30, 19 October 2011

2011-10-19T06:30:09Z

← Older revision		Revision as of 06:30, 19 October 2011
Line 1:		Line 1:
	{{Category=CEB press}}		{{Category=CEB press}}
	=Assembly=		=Assembly=
			This is the current assembly, it is in progress, expected to be completed by the end of october:
			<html><script type="text/javascript"
			src="http://cacher.dozuki.net/static/embed/ifixit-embed.2.js#id=1437&site=makeprojects.com">
			</script> <p><a href="http://makeprojects.com/Project/CEB-Press-Prototype-III-Assembly/1437/1">CEB Press Prototype III Assembly</a></p></html>
	After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://openfarmtech.org/weblog/?p=1955 blog]:<br>		After unpacking the crate as in [[The Liberator Packing List]], or [[CEB Press Build Instructions\|building the components]], you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the [http://openfarmtech.org/weblog/?p=1955 blog]:<br>
	<html>		<html>

Chris F at 00:52, 4 July 2011

2011-07-04T00:52:45Z

← Older revision		Revision as of 00:52, 4 July 2011
Line 5:		Line 5:
	<html>		<html>
	<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1045"></script> <p><a href="http://makeprojects.com/Project/GVCS-CEB-Assembly/1045/1">GVCS - CEB - Assembly</a></p>		<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1045"></script> <p><a href="http://makeprojects.com/Project/GVCS-CEB-Assembly/1045/1">GVCS - CEB - Assembly</a></p>
	~~</html>~~
	<embed src="http://blip.tv/play/AYHj3x4A" type="application/x-shockwave-flash" width="500" height="410" allowscriptaccess="always" allowfullscreen="true"></embed>		<embed src="http://blip.tv/play/AYHj3x4A" type="application/x-shockwave-flash" width="500" height="410" allowscriptaccess="always" allowfullscreen="true"></embed>

			</html>
	Assembly begins by locating a flat spot on the ground, preferably in a covered space in case of foul weather. This video shows the process and discusses some of the details, and the steps below give further details.		Assembly begins by locating a flat spot on the ground, preferably in a covered space in case of foul weather. This video shows the process and discusses some of the details, and the steps below give further details.