The Liberator Master Bill of Materials - Revision history

Marcin at 22:44, 3 July 2011

2011-07-03T22:44:15Z

← Older revision		Revision as of 22:44, 3 July 2011
Line 316:		Line 316:
	*Punch out hopper mounting plate 1/2”x2”x10” pieces, 1” off end		*Punch out hopper mounting plate 1/2”x2”x10” pieces, 1” off end
	*Hopper support 1/4”x4”x4” angle – hole 3” from end (2)		*Hopper support 1/4”x4”x4” angle – hole 3” from end (2)

			[[Category:CEB Press Fabrication]]

Conor at 19:37, 19 March 2011

2011-03-19T19:37:06Z

← Older revision		Revision as of 19:37, 19 March 2011
Line 154:		Line 154:
	! SUGGESTED SOURCE		! SUGGESTED SOURCE

			\|-align="left"
	! 1"x7", 12" long pieces of steel		! 1"x7", 12" long pieces of steel
	! 2		! 2
Line 160:		Line 161:
	!		!

			\|-align="left"
	! 1/4"x3"x6" tube 12"		! 1/4"x3"x6" tube 12"
	! 1		! 1
Line 166:		Line 168:
	!		!

			\|-align="left"
	! 1/4"x8x12" piece of steel		! 1/4"x8x12" piece of steel
	! 1		! 1
Line 172:		Line 175:
	!		!

			\|-align="left"
	! 1/4"x3"x6" angle, 12" long		! 1/4"x3"x6" angle, 12" long
	! 1		! 1
Line 178:		Line 182:
	!		!

			\|-align="left"
	! 1/4"x5"x'''???'''		! 1/4"x5"x'''???'''
	! 2		! 2

Conor: Formatting as a table. The names of several parts are unclear.

2011-03-19T19:29:01Z

Formatting as a table. The names of several parts are unclear.

@@ Line 1: / Line 1: @@
 {{Category=CEB press}}
 This is a functionally-descriptive list of the materials, with a summarized parts and cut list at the end.
@@ Line 149: / Line 147: @@
 This is the device that moves horizontally to load soil into the compression chamber and to eject finished bricks from the machine.
-*[2] 1"x7", 12" long - top and bottom surfaces
+{| cellpadding="6" cellspacing="0" border="1" align="left"
-*[1] 1/4"x3"x6" tube 12" - spacer
+! PART NAME
-*[1] 1/4"x8x12" - hood
+! NUMBER NEEDED
-*[1] 1/4"x3"x6" angle, 12" long - rear side
+! COST
-*[2] 1/4"x5"x
+! PURPOSE
 =Drawer Roller Guide Assembly=

Conor: /* Main Frame Fasteners */

2011-03-12T18:36:11Z

Main Frame Fasteners

← Older revision		Revision as of 18:36, 12 March 2011
Line 35:		Line 35:

	\|-align="left"		\|-align="left"
	! Grade 8, 1/2"x1.5" bolts, with lock washers, and nuts ~~- for structural top and bottom~~		! Grade 8, 1/2"x1.5" bolts, with lock washers, and nuts
	! 16		! 16
			! for structural top and bottom
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]
Line 111:		Line 112:

	\|}		\|}


	==Main Cylinder Attachment==		==Main Cylinder Attachment==

Conor at 18:33, 12 March 2011

2011-03-12T18:33:29Z

← Older revision		Revision as of 18:33, 12 March 2011
Line 31:		Line 31:
	! NUMBER NEEDED		! NUMBER NEEDED
	! COST		! COST
			! PURPOSE
	! SUGGESTED SOURCE		! SUGGESTED SOURCE

Line 41:		Line 42:
	\|-align="left"		\|-align="left"
	! 1/2"x1.5" bolts, with lock washers and nuts		! 1/2"x1.5" bolts, with lock washers and nuts
	! 16		! 16
			!
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~Main cylinder adjustment, front to back:~~ 1/2"x1.5" bolts with nuts		! 1/2"x1.5" bolts with nuts
	! 2		! 2
			! Main cylinder adjustment, front to back
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~Main cylinder adjustments,~~ 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts		! 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
	! 2		! 2
			! Main cylinder adjustments
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~For hopper edge stubs:~~ 1" stubs or 1/2"x1" bolts washers, nylon lock nuts.		! 1" stubs or 1/2"x1" bolts with washers and nylon lock nuts.
	! 12 of each		! 12 of each
			! For hopper edge stubs
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~Hopper mount plate:~~ 3/4" nuts		! 3/4" nuts
	! 6		! 6
			! Hopper mount plate
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~Hopper mount plate:~~ washers with 3/4x1.5" bolts		! washers with 3/4x1.5" bolts
	! 4		! 4
			! Hopper mount plate
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~For primary arms:~~ 3/4"x2" bolts, washers, nuts (welded to frame)		! 3/4"x2" bolts, washers, nuts (welded to frame)
	! 4 of each		! 4 of each
			! For primary arms
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~To attach secondary arms to primary arms:~~ 3/4"x2" bolts with nuts and washers, lock washers.		! 3/4"x2" bolts with nuts and washers, lock washers.
	! 6 of each ((4 for cylinder attachment side, 2 for other side)		! 6 of each ((4 for cylinder attachment side, 2 for other side)
			! To attach secondary arms to primary arms
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

	\|-align="left"		\|-align="left"
	! ~~To attach the adjustable parts:~~ 3/4"x1.5" bolts with nuts		! 3/4"x1.5" bolts with nuts
	! 14. 12 ~~for~~ adjustable legs ~~and feet plus nuts~~ and 2 ~~for~~ rear, vertical hopper supports		! 14
			! 12 to attach the adjustable legs and 2 to attach the rear, vertical hopper supports
	!		!
	!		!

	\|-align="left"		\|-align="left"
	! ~~Roller guide adjusters - [4]~~ 1/2"x2" bolts with nuts		! 1/2"x2" bolts with nuts
	! 4 bolts and 8 nuts (each bolt requires a second nut for locking)		! 4 bolts and 8 nuts (each bolt requires a second nut for locking)
			! Roller guide adjusters
	!		!
	! [[MoKan Fastener]]		! [[MoKan Fastener]]

Conor: Listing parts in a table format - will transfer to CEB Press Bill of Materials when done

2011-03-09T18:14:09Z

Listing parts in a table format - will transfer to CEB Press Bill of Materials when done

@@ Line 25: / Line 25: @@
 ==Main Frame Fasteners==
-These are primarily 1/2" bolts that hold the desing-for-disassembly frame together.
+These are primarily 1/2" bolts that hold the frame together. They allow the frame to be taken apart with just a spanner.
-*<span style="color:green">[16] grade 8, 1/2"x1.5" bolts, with lock washers, and nuts - for structural top and bottom
+{| cellpadding="6" cellspacing="0" border="1" align="left"
-*<span style="color:green">[16] 1/2"x1.5" bolts, with lock washers and nuts
+! PART NAME
-*<span style="color:green">Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
+! NUMBER NEEDED
-*<span style="color:green">Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
+! COST
-*<span style="color:green">Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
+! SUGGESTED SOURCE
-*<span style="color:green">Hopper mount plate - [6] 3/4" nuts, 4 washers[4] 3/4x1.5" bolts
-*<span style="color:green">Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
+|-align="left"
-*<span style="color:green">Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers, [6] lock washers.
+! Grade 8, 1/2"x1.5" bolts, with lock washers, and nuts - for structural top and bottom
-*<span style="color:green">Attachment of all adjustable parts: 3/4"x1.5" bolts: [14] total with nuts - 12 for adjustable legs and feet plus nuts; and 2 for rear, vertical hopper supports
+! 16
-*<span style="color:green">Roller guide adjusters - [4] 1/2"x2" bolts with [8] nuts (second nut is used for locking)
 ==Main Cylinder Attachment==
 This includes the bushing for attaching the main cylinder, plus the clevis pin, with collar to hold the pin in place.

Conor at 17:29, 8 February 2011

2011-02-08T17:29:48Z

← Older revision		Revision as of 17:29, 8 February 2011
Line 1:		Line 1:
			{{Category=CEB press}}
	This is the complete materials list for The Liberator automated CEB press which we designed, which we have taken to [[Full Product Release]], and which we are building for Factor e Farm use:		This is the complete materials list for The Liberator automated CEB press which we designed, which we have taken to [[Full Product Release]], and which we are building for Factor e Farm use:

Line 206:		Line 207:
	*Punch out hopper mounting plate 1/2”x2”x10” pieces, 1” off end		*Punch out hopper mounting plate 1/2”x2”x10” pieces, 1” off end
	*Hopper support 1/4”x4”x4” angle – hole 3” from end (2)		*Hopper support 1/4”x4”x4” angle – hole 3” from end (2)

	~~[[Category:The Liberator Full Product Release]]~~

WikiSysop: /* Drawer */

2010-08-03T20:26:38Z

Drawer

← Older revision		Revision as of 20:26, 3 August 2010
Line 74:		Line 74:
	=Drawer=		=Drawer=
	This is the device that moves horizontally to load soil into the compression chamber and to eject finished bricks from the machine.		This is the device that moves horizontally to load soil into the compression chamber and to eject finished bricks from the machine.

			*[2] 1"x7", 12" long - top and bottom surfaces
			*[1] 1/4"x3"x6" tube 12" - spacer
			*[1] 1/4"x8x12" - hood
			*[1] 1/4"x3"x6" angle, 12" long - rear side
			*[2] 1/4"x5"x

	=Drawer Roller Guide Assembly=		=Drawer Roller Guide Assembly=

WikiSysop: /* 1/2" */

2010-08-03T18:05:39Z

1/2"

← Older revision		Revision as of 18:05, 3 August 2010
Line 193:		Line 193:
	==1/2"==		==1/2"==
	*Holes at 16.2" separation (u-channel used for sides of compression chamber)		*Holes at 16.2" separation (u-channel used for sides of compression chamber)
			*One in the 1/4"x7" chamber u-channel - front and back - for front-back cylinder alignment

	==3/4"==		==3/4"==
	*Punch 3/4” holes in heavy angle arms (4 arms, see diagram)		*Punch 3/4” holes in heavy angle arms (4 arms, see diagram)

WikiSysop: /* Cut List Summary - Sweiger */

2010-08-03T05:26:50Z

Cut List Summary - Sweiger

@@ Line 178: / Line 178: @@
 *[1] 1/2”x2"x60" - roller surface
 *[1] 3/16"x2.5"x60” - roller surface
 [[Category:The Liberator Full Product Release]]