Torch Table Bill of Materials - Revision history

Vannmi at 02:13, 5 July 2012

2012-07-05T02:13:08Z

← Older revision		Revision as of 02:13, 5 July 2012
Line 109:		Line 109:
	The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.		The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.

			== Power Supply ==
			[http://www.circuitspecialists.com/24-volt-10-amp-power-supply.html 24 VOLT 10AMP SWITCHING POWER SUPPLY] from Circuit Specialist. Part Number: PS1-240W-24

	[[Category:BOM]]		[[Category:BOM]]

Vannmi at 02:09, 5 July 2012

2012-07-05T02:09:48Z

← Older revision		Revision as of 02:09, 5 July 2012
Line 109:		Line 109:
	The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.		The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.

	~~= Power Supply =~~

	~~[http://www.circuitspecialists.com/24-volt-10-amp-power-supply.html 24 VOLT 10AMP SWITCHING POWER SUPPLY] from Circuit Specialist. Part Number: PS1-240W-24~~

	[[Category:BOM]]		[[Category:BOM]]

Vannmi at 01:41, 5 July 2012

2012-07-05T01:41:05Z

← Older revision		Revision as of 01:41, 5 July 2012
Line 109:		Line 109:
	The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.		The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.

			= Power Supply =

			[http://www.circuitspecialists.com/24-volt-10-amp-power-supply.html 24 VOLT 10AMP SWITCHING POWER SUPPLY] from Circuit Specialist. Part Number: PS1-240W-24

	[[Category:BOM]]		[[Category:BOM]]

Chris F: /* Stepper motors */

2011-09-20T13:19:27Z

Stepper motors

← Older revision		Revision as of 13:19, 20 September 2011
Line 33:		Line 33:

	=Stepper motors=		=Stepper motors=
			'' See Also [[Stepper Motor]]''


	From [http://www.xylotex.com/Econo3Ax425.htm Xylotex].		From [http://www.xylotex.com/Econo3Ax425.htm Xylotex].

Chris F at 20:26, 19 September 2011

2011-09-19T20:26:47Z

← Older revision		Revision as of 20:26, 19 September 2011
Line 1:		Line 1:
	{{Category=Torch Table}}		{{Category=Torch Table}}
	~~{{ToolTemplate\|ToolName=Torch Table}}~~

	=Oxy-acetylene Torch=		=Oxy-acetylene Torch=

Marcin at 21:17, 2 June 2011

2011-06-02T21:17:01Z

← Older revision		Revision as of 21:17, 2 June 2011
Line 106:		Line 106:

	The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.		The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.


			[[Category:BOM]]

Conor at 02:05, 23 March 2011

2011-03-23T02:05:57Z

← Older revision		Revision as of 02:05, 23 March 2011
Line 32:		Line 32:
	==Industry Standards==		==Industry Standards==
	*standard 1-3/8" (35mm) diameter machine torch		*standard 1-3/8" (35mm) diameter machine torch

			=Stepper motors=
			From [http://www.xylotex.com/Econo3Ax425.htm Xylotex].

			Stepper motors:

			[[Image:steppers.jpg]]

			Controller:

			[[Image:controller.jpg]]

			Possible limit switch configuration:

			[[Image:limitswitch.jpg]]

			Setting fractional steps on stepper motors:

			[[Image:fractionalsteps.jpg]]

			==Specs==
			*1/4" shaft
			*425 in oz torque
			*about 50 W power usage

			[[Image:xylotex4axisspecs.jpg]]

			The XS-3525/8S-4 microstepping stepper motor driver is the perfect choice for CNC retrofitting of desktop and small benchtop milling machines. Connect bipolar wired stepper motors, power, and parallel port signal source.


			*Small Size 4.275 x 2.8? inches.
			*Drives up to 35 Volts @ 2.5 A/phase
			*4 different microstepping step levels from Full-Step(FS) to 1/8 step
			*Filtered & Buffered Step & Dir lines
			*Built in DC-DC converter for +5V
			*Break-out screw terminals for I/O

			'''Microstepping Truth Table'''

			{\| cellpadding="6" cellspacing="0" border="1" align="left"
			! axS1
			! axS0
			! Output

			\|-align="left"
			! 0
			! 0
			! Full Step

			\|-align="left"
			! 0
			! 1
			! Half Step

			\|-align="left"
			! 1
			! 0
			! Quarter Step

			\|-align="left"
			! 1
			! 1
			! Eighth Step

			\|}

			1 means jumper NOT installed


			The XS-3535/8S-4 Stepper Driver is a 4 axis pulse-width-modulated (PWM) current controlled bipolar micro-stepping controller.<br>
			Each axis drive has a +-2.5 Amp/phase @ 35 Volt maximum continuous Output Rating. The drive circuitry has thermal shutdown protection and crossover-current protection. Synchronous rectification circuitry eliminates the need for external clamp diodes in most applications.<br>
			Each axis accepts Step & Direction signals, along with 2 jumper inputs to define microsteps per full step.

			The board is of 4-Later construction with Isolated Power and Logic supply planes. The drive circuitry has a heat sink attached to allow cooler operation.

Conor at 02:03, 23 March 2011

2011-03-23T02:03:19Z

← Older revision		Revision as of 02:03, 23 March 2011
Line 2:		Line 2:
	{{ToolTemplate\|ToolName=Torch Table}}		{{ToolTemplate\|ToolName=Torch Table}}

			=Oxy-acetylene Torch=
	Source for the torch: http://www.dynatorch.com/OxyFuelKit.htm		Source for the torch: http://www.dynatorch.com/OxyFuelKit.htm

			==Introduction==

			The term Machine Torch refers to a 3-hose or 2-hose oxy-acetylene torch nozzle that is used on automated CNC torch cutting tables. The 3-hose version features automatic oxygen blast, engaged via a solenoid. The 2-hose version requires manual toggle of the oxygen blast.

			Add flashback arrestors to the regulator, as the machine torch typically does not have flashback arrestors. [http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230451458040&rvr_id=&crlp=1_263602_263622&UA=L*F%3F&GUID=cfa30c8a1280a0e203a624e6fdc945bf&itemid=230451458040&ff4=263602_263622]

			==Searching==
			*$370 3-hose torch - [http://www.toolsforless.com/product/7836/Concoa_823-4783_3_Hose_Machine_Torch]
			*$450 - [http://www.airgas.com/browse/product.aspx?Msg=RecID&recIds=357722&WT.svl=357722]
			*Bugo - [http://www.bugo.com/gofer.html]
			*[http://cgi.ebay.com/HARRIS-Machine-Torch-New-Tips-Cutting-Track-Burner-Weld_W0QQitemZ370147859221QQcmdZViewItem HARRIS Machine Torch New Tips Cutting Track Burner Weld $279.99]
			*[http://cgi.ebay.com/Airco-2621-Machine-torch-Used-Cutting-Torch-%26-Rack-$650_W0QQitemZ390010391775QQcmdZViewItem Airco 2621 Machine torch Used Cutting Torch & Rack $650]
			*[http://www.bonanzle.com/booths/tomjelly/items/SMITHS_LITTLETORCH_11_1101C_OXY_ACETYLENE_WELD_TORCH SMITHS LITTLETORCH 11-1101C OXY ACETYLENE WELD TORCH $99.00]
			*[http://www.google.com/product_url?q=http://www.toolsforless.com/product/9951/Thermal_Dynamics_1-1320-1_Cutmaster_101_Plasma_Cutter_75_Torch_20_Leads&fr=AH6cnYiKpY0WjswRoXcSHrfGIq0tIOGfoYQqEDvtjXAxzN9I0MQqQXznS9Z5RFRrpjmSJsZPeQCUqLs-ESi-4ZHwM8ICUqGmUtyI2SIF5-H1oUCcHJFq3DZEh_xmvhd2AVZPg9BwpN77C49oI4sxmAYeGpwLxxdvHh2HNoP5Q-m5I6cHYTrE9YqXLlMuZve-gtun3dCt9wfOIXtG-wCYhXQAAAAAAAAAAA&gl=us&hl=en&sa=title Thermal Dynamics 1-1320-1 Cutmaster 101 Plasma Cutter $2,099.00]

			==More Searching==
			[[Image:machinetorch.jpg\|thumb\|Machine torch obtained on Ebay.]]
			*3-hose torch: http://cgi.ebay.com/Koike-Style-Oxygen-Acetylene-Machine-Torch-Oxy-Acety-/310228372868
			*'''2-hose torch''': http://cgi.ebay.com.sg/Victor-Style-Heavy-Duty-Machine-Cutting-Torch-298-2F-35-/400102570634
			*Victor 2-hose - [http://cgi.ebay.com/Victor-long-Barrel-bevel-Machine-Torch-model-mt-210-/190409345583?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2c55480a2f]
			*Victor short barrel $200 used - [http://cgi.ebay.com/Victor-Short-Barrel-bevel-machine-Torch-model-204-/190409345714?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2c55480ab2]

			==Recommendations==
			*http://www.cnczone.com/forums/showthread.php?p=606570#post606570 Oxweld

			==Industry Standards==
			*standard 1-3/8" (35mm) diameter machine torch

Conor at 02:00, 23 March 2011

2011-03-23T02:00:41Z

← Older revision		Revision as of 02:00, 23 March 2011
Line 2:		Line 2:
	{{ToolTemplate\|ToolName=Torch Table}}		{{ToolTemplate\|ToolName=Torch Table}}

	http://www.dynatorch.com/OxyFuelKit.htm		Source for the torch: http://www.dynatorch.com/OxyFuelKit.htm

Conor: Created page with "{{Category=Torch Table}} {{ToolTemplate|ToolName=Torch Table}} http://www.dynatorch.com/OxyFuelKit.htm"

2011-03-23T02:00:04Z

Created page with "{{Category=Torch Table}} {{ToolTemplate|ToolName=Torch Table}} http://www.dynatorch.com/OxyFuelKit.htm"

New page

{{Category=Torch Table}}
{{ToolTemplate|ToolName=Torch Table}}

http://www.dynatorch.com/OxyFuelKit.htm