Tractor Manufacturing Instructions - Revision history

Elifarley: Text replace - "openfarmtech.org/weblog" to "blog.opensourceecology.org"

2013-07-02T17:33:08Z

Text replace - "openfarmtech.org/weblog" to "blog.opensourceecology.org"

← Older revision		Revision as of 17:33, 2 July 2013
Line 6:		Line 6:
	=Design=		=Design=

	Start with a [http://~~openfarmtech~~.org~~/weblog~~/2010/07/open-source-tractor-update/ design].		Start with a [http://blog.opensourceecology.org/2010/07/open-source-tractor-update/ design].

	=Frame=		=Frame=
	Then, [http://~~openfarmtech~~.org~~/weblog~~/2010/07/lifetrac-ii-frame-2/ build the frame].		Then, [http://blog.opensourceecology.org/2010/07/lifetrac-ii-frame-2/ build the frame].

	Frame Construction Video Script [[http://opensourceecology.org/wiki/LifeTrac_II_Build/Frame_Construction_Video_Script]]		Frame Construction Video Script [[http://opensourceecology.org/wiki/LifeTrac_II_Build/Frame_Construction_Video_Script]]
Line 30:		Line 30:


	Then, [http://~~openfarmtech~~.org~~/weblog~~/2010/08/lifetrac-ii-update/ prepare all the wheel mounting materials.]		Then, [http://blog.opensourceecology.org/2010/08/lifetrac-ii-update/ prepare all the wheel mounting materials.]

	<html>		<html>
Line 42:		Line 42:
	</html>		</html>

	Then, go for the [http://~~openfarmtech~~.org~~/weblog~~/2010/08/lifetrac-prototype-ii-test-drive/ first test drive.]		Then, go for the [http://blog.opensourceecology.org/2010/08/lifetrac-prototype-ii-test-drive/ first test drive.]

	<html>		<html>
Line 54:		Line 54:
	Wheel Tracks Construction video script [[http://opensourceecology.org/wiki/LifeTrac_II_Build/Wheel_Tracks_Construction_Video_Script]]		Wheel Tracks Construction video script [[http://opensourceecology.org/wiki/LifeTrac_II_Build/Wheel_Tracks_Construction_Video_Script]]

	Then, [[http://~~openfarmtech~~.org~~/weblog~~/2010/09/extreme-traction/ build the wheel tracks.]]		Then, [[http://blog.opensourceecology.org/2010/09/extreme-traction/ build the wheel tracks.]]

	<html>		<html>
Line 315:		Line 315:
	</html>		</html>

	See corresponding blog post - http://~~openfarmtech~~.org~~/weblog~~/2010/09/lifetrac-prototype-ii-completed/		See corresponding blog post - http://blog.opensourceecology.org/2010/09/lifetrac-prototype-ii-completed/

Marcin: /* Frame */

2011-12-28T12:35:25Z

Frame

← Older revision		Revision as of 12:35, 28 December 2011
Line 316:		Line 316:

	See corresponding blog post - http://openfarmtech.org/weblog/2010/09/lifetrac-prototype-ii-completed/		See corresponding blog post - http://openfarmtech.org/weblog/2010/09/lifetrac-prototype-ii-completed/


	~~=Frame=~~

	As a general rule, all the measurements I have listed here will be more accurate if you mark the centre of each tube and then measure the "holes" from the centre out as opposed to from the ends in, in case some tubes are not cut to the exact lengths.

	~~Key - (V) = Vertical. (E,W) = East,West. (N,S) = North South.~~

	~~13/16" drill bit used for 3/4" bolts.~~

	*[4] 92"×4"×4" Tubes for base.
	**[2] Outer base tubes - 13/16" (V)holes 2" from ends. (V)holes 4" front of centres. (E,W)holes for wheel plates 9" & 13" from ends. (V)holes for hydraulic base plate 13-1/4" & 22-3/4" behind centres, 1-1/4" from outer edges.
	**[2] Inner base tubes - (V)holes 2" form ends. (V)hole 4" front of centres. (E,W)holes 6", 9" & 13" from ends & (E,W)holes in centres. (V)holes for hydraulic base plate 13-1/4" & 22-3/4" behind centres, 1-1/4" from inner edges.

	*[3] 60" Under base tubes.
	**(V)holes 2" & 10" from ends.
	**(N,S)holes 14" form ends.

	*[2] 55" Front vertical tubes.
	**(E,W)holes 2" form tops & 2", 6" & 9" from bottoms.
	**(N,S)holes 6" from tops & 5" from bottoms.

	*[2] 52" Centre vertical tubes.
	**(E,W)holes 2" from tops & 6" from bottoms.
	**(N,S)holes 6" from tops & 2" from bottoms.

	*[2] 59" Rear vertical tubes.
	**(E,W)holes 6" from tops & 2", 6" & 9" from bottoms.
	**(N,S)holes 2" from tops & 5" from bottoms.

	*[3] 44" Top (overhead E,W) tubes.
	**(V)holes 2" from ends.
	**(N,S)holes 6" from ends.

	*[2] 84" Top (overhead N,S) tubes.
	**(E,W)holes 2" from ends & in centres.
	**(v)holes 6" from ends & 4" from of centres.


	~~[[Category:LifeTrac II]]~~

Marcin at 12:35, 28 December 2011

2011-12-28T12:35:11Z

Show changes

Marcin: Created page with "=Frame= As a general rule, all the measurements I have listed here will be more accurate if you mark the centre of each tube and then measure the "holes" from the centre out as ..."

2011-12-28T08:03:45Z

Created page with "=Frame= As a general rule, all the measurements I have listed here will be more accurate if you mark the centre of each tube and then measure the "holes" from the centre out as ..."

New page

=Frame=

As a general rule, all the measurements I have listed here will be more accurate if you mark the centre of each tube and then measure the "holes" from the centre out as opposed to from the ends in, in case some tubes are not cut to the exact lengths.

Key - (V) = Vertical. (E,W) = East,West. (N,S) = North South.

13/16" drill bit used for 3/4" bolts.

*[4] 92"×4"×4" Tubes for base.
**[2] Outer base tubes - 13/16" (V)holes 2" from ends. (V)holes 4" front of centres. (E,W)holes for wheel plates 9" & 13" from ends. (V)holes for hydraulic base plate 13-1/4" & 22-3/4" behind centres, 1-1/4" from outer edges.
**[2] Inner base tubes - (V)holes 2" form ends. (V)hole 4" front of centres. (E,W)holes 6", 9" & 13" from ends & (E,W)holes in centres. (V)holes for hydraulic base plate 13-1/4" & 22-3/4" behind centres, 1-1/4" from inner edges.

*[3] 60" Under base tubes.
**(V)holes 2" & 10" from ends.
**(N,S)holes 14" form ends.

*[2] 55" Front vertical tubes.
**(E,W)holes 2" form tops & 2", 6" & 9" from bottoms.
**(N,S)holes 6" from tops & 5" from bottoms.

*[2] 52" Centre vertical tubes.
**(E,W)holes 2" from tops & 6" from bottoms.
**(N,S)holes 6" from tops & 2" from bottoms.

*[2] 59" Rear vertical tubes.
**(E,W)holes 6" from tops & 2", 6" & 9" from bottoms.
**(N,S)holes 2" from tops & 5" from bottoms.

*[3] 44" Top (overhead E,W) tubes.
**(V)holes 2" from ends.
**(N,S)holes 6" from ends.

*[2] 84" Top (overhead N,S) tubes.
**(E,W)holes 2" from ends & in centres.
**(v)holes 6" from ends & 4" from of centres.

[[Category:LifeTrac II]]