Gutter.zip ‎(file size: 45 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

Dificulty from 3rd file to next. ChatGPT is having difficulty cutting out the vertical sides. I told it to boolean out the interference of the gutter drop with the 2x10 verticals. I tell it - to go back to where hole through gutter base worked. Start from this schema. You are messing up the sloped bases, and 2x10s are not in the right place. I'm not sure what you are doing. From this schema - upgrade this so that the vertical 2x10s are cut out. Since 4 2x10s meet at the gutter drop, you need to notch out the 4 2x10s, but only the 1.5" at the bottom.
Solved by Collin - Gutter Notching - file uploaded as zip here.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	04:04, 3 May 2026	(45 KB)	Marcin (talk \| contribs)	Corrected by Collin.
	22:08, 1 May 2026	(26 KB)	Marcin (talk \| contribs)	After it had trouble notching the verticals, here is the redo of schema, taken supposedly from the last version. This works. Now trying to notch the sides of the verticals properly by the gutter drop..
	21:43, 1 May 2026	(21 KB)	Marcin (talk \| contribs)	Upgrade with hole through gutter base, but sides are not cut out.
	20:40, 1 May 2026	(17 KB)	Marcin (talk \| contribs)	Works. 6" drop to mid. Sample of 20' long. To run, freecadcmd -c "exec(open('gutter_compiler.py').read())"
	19:13, 1 May 2026	(7 KB)	Marcin (talk \| contribs)

You cannot overwrite this file.

The following page uses this file: