CEB Hopper CAD

From Open Source Ecology
Revision as of 06:00, 2 June 2011 by Syk0saje (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Hoppercad1.jpg

Note: It is possible to cut the entire hopper from a 5'x10' sheet of 1/8" metal - thought the upper corners are cut off as shown. This is not problematic. The following shows the pattern of cut from a 5x10 sheet:

Hoppercad2.jpg

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Hopper_CAD&oldid=30075"