View source for File:All Three Wheel mounts ready for DXF conversion (v3) with 6 inch hole spacings for 3 inch bearings.skp

← File:All Three Wheel mounts ready for DXF conversion (v3) with 6 inch hole spacings for 3 inch bearings.skp

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reasons:

The action you have requested is limited to users in one of the groups: Users, Administrators.
You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

The bolt holes for the three-inch bearings have been changed to 6 inches apart.

Return to File:All Three Wheel mounts ready for DXF conversion (v3) with 6 inch hole spacings for 3 inch bearings.skp.

Retrieved from "https://wiki.opensourceecology.org/wiki/File:All_Three_Wheel_mounts_ready_for_DXF_conversion_(v3)_with_6_inch_hole_spacings_for_3_inch_bearings.skp"