File:Unibase2.fcstd
Jump to navigation
Jump to search
Unibase2.fcstd (file size: 96 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes (Newest on Top)
- Updated at 16:28, 11 August 2020
- Final enlarged holes and chamfered holes - Gitlab - [1]
- Gitlab - [2] - has all the chamfers, which take 3 MB. File for printing.
- Note - 11:56, 31 July 2020 has the 0,6 mm widened hole - the Gitlab version has the narrower hole. Thus, the file here is the authoritative last version for printing.
- Update - https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/finished_base_2.fcstd
- Full file of 14:20, 26 July 2020 is at https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/finished__base.fcstd
- You can regain full base from test print file by removing the cuts from version 20:31, 24 July 2020
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 04:46, 24 June 2021 | (96 KB) | Marcin (talk | contribs) | |
| 23:56, 9 September 2020 | (651 KB) | Marcin (talk | contribs) | Update with holes for mounting to base. + Power cord zip tie hole. | |
| 21:28, 11 August 2020 | (93 KB) | Marcin (talk | contribs) | Dumb version of final file. | |
| 21:26, 11 August 2020 | (442 KB) | Marcin (talk | contribs) | Moved motor mount on bed to the back. | |
| 21:00, 11 August 2020 | (176 KB) | Marcin (talk | contribs) | Base with strengthened reinforcement at back. | |
| 16:56, 31 July 2020 | (88 KB) | Marcin (talk | contribs) | Widened controller mount hole by 0.6 mm (0.3 mm outwards in each direction) | |
| 20:34, 26 July 2020 | (87 KB) | Marcin (talk | contribs) | Finished base - with allowance for Z axis motor piece set screw. | |
| 20:22, 26 July 2020 | (86 KB) | Marcin (talk | contribs) | Deepened Z axis bolt hole to 20 mm. | |
| 19:20, 26 July 2020 | (84 KB) | Marcin (talk | contribs) | Dumb object of finished file ready for test print. | |
| 18:58, 26 July 2020 | (979 KB) | Marcin (talk | contribs) | Update of hole next to z motor. | |
| 18:38, 26 July 2020 | (978 KB) | Marcin (talk | contribs) | With controller mount holes | |
| 18:24, 26 July 2020 | (857 KB) | Marcin (talk | contribs) | Base without front holes. | |
| 00:22, 26 July 2020 | (348 KB) | Marcin (talk | contribs) | Modified controller compartment. | |
| 03:25, 25 July 2020 | (50 KB) | Marcin (talk | contribs) | Z mount test | |
| 01:31, 25 July 2020 | (144 KB) | Marcin (talk | contribs) | Test print file by cutting parts off outside LCD/controller mount. | |
| 01:28, 25 July 2020 | (446 KB) | Marcin (talk | contribs) | Updated with mounting holes for LCD and mounting for controller. | |
| 02:21, 17 July 2020 | (36 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following page uses this file: