File:Universal axis carriage side.fcstd
Jump to navigation
Jump to search
Universal_axis_carriage_side.fcstd (file size: 60 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- Make sure belt hole is about 6.9 mm - that is the correct version to use:
- Use 22:09, 2 November 2019 for printing. Latest file available.
- Use 14:46, 14 June 2017 version for full part design.
- 09:41, 25 February 2017 version should be corrected so the X location of 2 horizontal mid holes is equal to that of the top and bottom row. This allows 4 of 6 magnets to attach mount - lower or higher via 4 magnets rather than via all magnets.
Subparts
Subpart notes: clam has one side that needs to rotate 180 deg.
Ribs - FreeCAD -File:Ribs.fcstd
Ribless - FreeCAD -File:Widnedcarriagebelthole.fcstd
Ribless - FreeCAD -File:Carriageclam.fcstd. Note this file is
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 08:25, 5 December 2019 | (60 KB) | Marcin (talk | contribs) | Compound of carriage with widened belt hole of Nov 2019. |
| 03:09, 3 November 2019 | (63 KB) | Marcin (talk | contribs) | Updated with belt peg hole 1 mm wider | |
| 22:56, 29 May 2019 | (54 KB) | Marcin (talk | contribs) | Simplified carriage, dumb object. | |
| 00:01, 3 March 2019 | (56 KB) | Marcin (talk | contribs) | Stripped but un-simplified carriage with hole. | |
| 23:59, 2 March 2019 | (668 KB) | Marcin (talk | contribs) | Carriage with hole for through wiring. Full detail. | |
| 22:57, 22 February 2019 | (7 KB) | Marcin (talk | contribs) | Positionally correct for Overslung Titan Aero Volcano | |
| 23:35, 24 December 2018 | (21 KB) | Marcin (talk | contribs) | Simplified carriage sandwich with wide belt hole added. | |
| 22:46, 24 December 2018 | (13 KB) | Marcin (talk | contribs) | Simplified carriage with rod holes added (10 mm outer holes, not inner) | |
| 22:44, 22 December 2018 | (6 KB) | Marcin (talk | contribs) | Simplified Carriage positioned for X axis of exruder. | |
| 19:46, 14 June 2017 | (620 KB) | Marcin (talk | contribs) | Full detail file including DIMENSION DRAWING | |
| 03:27, 13 June 2017 | (6 KB) | Marcin (talk | contribs) | In correct x axis assembly location. | |
| 18:00, 12 June 2017 | (6 KB) | Marcin (talk | contribs) | Simplified, no sketch. | |
| 17:59, 12 June 2017 | (13 KB) | Marcin (talk | contribs) | Simplified, with sketch. | |
| 09:41, 25 February 2017 | (552 KB) | Polemidis (talk | contribs) | corrected the uneven nut hole size | |
| 16:05, 18 February 2017 | (571 KB) | Marcin (talk | contribs) | Expanded holes from about .24" to .26" to fit magnets with a little extra space. With .24" version, some magnets had to pe pushed in tight. | |
| 02:57, 15 February 2017 | (557 KB) | Polemidis (talk | contribs) |
You cannot overwrite this file.
File usage
The following 15 pages use this file: