Open Source Ground Vehicle Remote Piloting System Installation Kit

From Open Source Ecology
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Basics

  • Part of the Remote Operation Construction Set
  • A kit that converts a standard ground vehicle (such as a truck, car etc.) into a remotely piloted version
  • Can be under the hood or not
  • Includes controls as well as information feedback/collection
  • Should be very easy to install, and work on a variety of vehicles

Used For

Industry Standards

Existing Open Source Designs

Basic Design

Removable Batteries

  • 2x Minimum Per Controller
  • Contains a LiPo Battery in a 3D Printed Enclosure
  • Has Rails on the outside of the enclosure for insertion into the Battery Module, or the External Battery Charger

Battery Module

  • 2x Minimum Slots Per Controller
  • Distributes battery power to all electronics, monitors+displays battery levels, and does intigrated charging
  • Has AC, and DC Ports for Power In (120V AC In + Alternator" and a "USB-C IN")
  • Has some sort of LED Indicator Screen/Very Basic LCD Screen for battery level indication
  • Distributes DC Power By a 10 USB-C Port HUB (oversized to allow for further expansion) (also note this one is for power delivery only NOT DATA)

Brains Module

  • 1x Rasberry Pi for IO + Screens
  • ?x Arduino(s) for servo contol
  • ?x Servo Breakout Boards(s) for servo control
  • 1x 10 Port USB-C HUB (oversized to allow for further expansion) (This one is mainly for Data and minor power requirements)

Networking Module

  • 1x Control Single Board PC connected to the brains module
  • ?x USB-C IN
  • ?x Ethernet in (1GB Most Likely)
  • ?x Wifi Antenna
  • ?x Cellular (4/5g most likely) Antenna(s)
  • ?x Sattalite Antenna(s)
  • ?x LORAN Antenna(s)
  • ?x GPS Antenna(s)
  • ?x RC Antenna(s)

Sensor Modules

  • These are more necissary for the automation, so use as needed

Roof Sensor Module

  • Either a bolt on or roof rack design
  • A spinning LIDAR + A Standard Small Marine Grade Radar + A Camera Array
  • Is connected to the brains module

Remote Sensor Module

  • A small module containing an aditional camera, and an ultrasonic distance sensor
  • Attaches via a large neodyminium magnet, a suction cup, or is physicaly bolted on
  • Is connected to the brains module

Dashcam Module

  • A standard front and rear dashcam setup
  • Is connected to the brains module

FPV Module

  • A 360 3D Camera set right where the drivers head would be
  • Is connected to the brains module

Vehicle Interface Module

  • Connects Directly to the Vehicle's Computer
  • Gains access to Power Steering, Gear Shifting, Throttle
  • Can also be used for diagnostics

BOM

See Also

Useful Links