D3D Pro

From Open Source Ecology
(Redirected from D3D v19.11)
Jump to: navigation, search
D3dpro.jpg

You can get a ready-to-build kit at https://www.opensourceecology.org/d3d-pro/

CAD

Carriagemotor.pngYaxisfroma1906.png14angleframe.pngD3d1911xaxis.png Assy1.pngCarriagemotor.pngCarriagemotor2.pngCarriagehalfcarriage.pngFrameclip.pngCarriageidler.pngMotorwithclip.pngIdlerwithclip.pngCableclip.pngMotorwithhanger.pngD3dcableorg loop.pngLoomclip.pngUpdatedforyconnex.jpgUpdatedgantryfory.jpgWidenedmotor.pngWidenedidler.pngTruncatedwidenedmotor.pngAutoparallel.pngWithsidehole.png


Control Panel

See more at 3D Printer Control Panel

Ontrolpanelseated.png

BOM

edit

Quick attach wiring.

Connector 1

Extruder part Wire color
Heat sink fan 1 + red
2 - black
Thermistor 3 orange
4 white
Heater element 5 green
6 yellow
Active cooling fan 7 + brown
8 - blue


Connector 2

Extruder part Wire color
Z-probe 1 brown
2 blue
3 black
Extruder stepper motor 4 green
5 yellow
6 orange
7 red

Bugs

  • Card slot 3D print - notch too large, card can be pushed in behind the slot
  • Get rid of STOP PRINT from menu - can hit it accidentally during long print
  • Fix belt hole in carriage to motor
  • Fix carriage to idler placement
  • Improvement - Flexible surface for popping prints right off

Links

Product

Build Instructions

edit

Production Manual

edit

Production

Control Panel Wiring and Test

This is part of a quality control sequence, which requires identificiation of all wires: Final_Five_Minute_Control_Panel_Test

Firmware

File:Marlin D3D Pro v1.0.zip

Links