File:3D Print of Tines.jpeg

From Open Source Ecology
Jump to: navigation, search
Original file ‎(3,552 × 2,000 pixels, file size: 1,003 KB, MIME type: image/jpeg)

Printed some model tines for the Soil Mixer / Pulverizer.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current06:44, 13 March 2014Thumbnail for version as of 06:44, 13 March 20143,552 × 2,000 (1,003 KB)Colten Jackson (talk | contribs)Printed some model tines for the Soil Mixer / Pulverizer.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerNokia
Camera modelLumia 928
Exposure time17,257/500,000 sec (0.034514)
F Numberf/2
ISO speed rating100
Date and time of data generation01:21, 13 March 2014
Latitude39° 51′ 44.25″ N
Longitude94° 22′ 34.49″ W
Altitude0 meters above sea level
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
Software usedWindows Phone
Y and C positioningCentered
Exif version2.2
Date and time of digitizing01:21, 13 March 2014
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
APEX shutter speed4.856674
APEX aperture2
APEX exposure bias0
Metering modeAverage
Light sourceUnknown
FlashFlash fired, compulsory flash firing
Supported Flashpix version0,100
Color spacesRGB
Exposure modeAuto exposure
White balanceAuto white balance
Digital zoom ratio1
Scene capture typeStandard
Measurement mode3-dimensional measurement
Measurement precisionPoor (131)
GPS tag version2.2.0.0
Retrieved from "https://wiki.opensourceecology.org/index.php?title=File:3D_Print_of_Tines.jpeg&oldid=116561"