Power Cube Tank Welding Procedure

From Open Source Ecology
Jump to: navigation, search

Overview

Procedure

  1. Tack in Hydraulic Tank
  2. Cut and Tack Tabs (for making tank flush)
  3. Tack Tank
  4. Tack Fuel Tank Support
  5. Tack in the Tank (top of the cap, top of the frame)
  6. Put in the engine support angle
  7. Bolt Engine Support Plate
  8. Place 29" Mount in place and Bolt
  9. Tack 29" in location, tack perpendicular plates
  10. Put on Engine.
  11. Put on Engine Mount Boltsa and tack in place)
  12. Finish Weld
  13. Trim Bolts, Mount Engine

See Also