View source for Ceramic Printing WASP Extruder

← Ceramic Printing WASP Extruder

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, Administrators.

You can view and copy the source of this page.

Liquid Deposition Modeling - http://www.wasproject.it/w/ldm-liquid-deposit-modelling-wasp-extruder/

The above page shows a good design rationale for the clay extruder, though extruder is shot load, not continuous load for the press part. Here is a PDF archived - [[LDM.pdf]]

Unfortunately, not [[OSHWA Compliant]].

Return to Ceramic Printing WASP Extruder.

Retrieved from "https://wiki.opensourceecology.org/wiki/Ceramic_Printing_WASP_Extruder"