View source for Tensile Strength of 3D Printing Plastics

=Basics=
*Polycarbonate appears to be the strongest - 10000 PSI - [https://airwolf3d.com/2017/07/24/strongest-3d-printer-filament/]
*IC3D boasts of 14000 psi reinforced nylon - [https://3dprintingindustry.com/news/taking-3d-printing-extreme-fiber-reinforced-pa6-250-stronger-abs-131996/] - but at $160/kg [https://3dprintingindustry.com/news/taking-3d-printing-extreme-fiber-reinforced-pa6-250-stronger-abs-131996/], it is 3x that of PC filament - [https://www.amazon.com/Polymaker-Filament-Printing-Resistant-Stronger/dp/B07MTGKX38].
*How about adding powdered glass fibers to filament for extra srength? [https://www.fibreglast.com/product/5937/All_Fillers?gclid=EAIaIQobChMItIG00d6s4AIV27jACh3eJQl_EAQYAyABEgK5YfD_BwE] - sounds like that prevents shrinking.
*polycarbonate works as well as fiber-reinforced Nylon X and continuous fiber printed other material - [https://www.matterhackers.com/news/filament-strength-testing]
*Nylon X has 14000 PSI strength - [file:///home/ose/Desktop/MatterHackers%20NylonX%20TDS%20(1).pdf]

=List=
==Plastic==
===PLA===
*

===ABS===
*

===Nylon===
*

===Polycarbonate===
*



==Plastic Composite==

===Glass Fiber Reinforced PLA===
*

===Glass Fiber Reinforced ABS===
*

===Glass Fiber Reinforced Nylon===
*

===Glass Fiber Reinforced Polycarbonate===
*

===Basalt Fiber Reinforced PLA===
*

===Basalt Fiber Reinforced ABS===
*

===Basalt Fiber Reinforced Nylon===
*

===Basalt Fiber Reinforced Polycarbonate===
*

===Carbon Fiber Reinforced PLA===
*

===Carbon Fiber Reinforced ABS===
*

===Carbon Fiber Reinforced Nylon===
*

===Carbon Fiber Reinforced Polycarbonate===
*


=See Also=
*