View source for April 2011 Production Run Bolts BOM

=Tractor (1 tractor)=

Functionality list:

3/4”:

*[14] 5"bolts+[14] nuts + [44] washers to suit front loader 
*[8] 4.5” bolts + [8] nuts bolts if available, if not, add to above
*[4] 4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
*[32] 5-1/2", with [32] washers for one side and [32] metal lock nuts. For wheel plates & cylinder plates. 
*[42] 3/4"x9" bolts, [84] washers, and [42] metal lock nuts. This is for the assembly of the main frame.
*[16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. <span style="color:blue"> Equivalent to 32" of threaded rod.
*[8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame, 
*[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
*[32] 9/16"x1.5" bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers. (2” will do if no 1.5)
*[6] 5.5” for power cube mounts, [6] metal lock, [6] washers
*[2]  5”x1/2” for valve mounts [2]nuts and [2] washers
.

TOTALS (above is checked 4/29/00, totals here are not checked)

*<span style="color:green">[40] 3/4"x5.5" bolts
*<span style="color:green">[42] 3/4"x9" bolts
*<span style="color:green">[4] 3/4"x4.5" bolts
*<span style="color:green">[8] 3/4"x2" bolts
*<span style="color:green">[120] 3/4" washers
*<span style="color:green">[80] 3/4" metal lock nuts
*<span style="color:green">[16] 3/4" nuts
*<span style="color:green">[4] 3/4" nylon lock nuts
*<span style="color:green">[8] 3/4" lock washers

*<span style="color:green">[16] 1/2"x2" bolts
*<span style="color:green">[16] 1/2" nylon lock nuts
*<span style="color:green">[16] 1/2" lock washers

*<span style="color:green">[32] 5/8"x2" bolts
*<span style="color:green">[32] 5/8" metal lock nuts
*<span style="color:green">[32] 5/8" lock washers

*<span style="color:green">[32] 9/16"x2" bolts
*<span style="color:green">[32] 9/16" washers
*<span style="color:green">[32] 9/16" nylon lock nuts

[[File:Example.jpg]]

=CEB Press Bolts=

*Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts
*Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
*Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
*Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
*Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
*Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts
*Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
*Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.
*Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts; 
*Roller guides - [2] 1/2"x2" with [2] nylon lock nuts
*Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.
*8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts
*Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers
*Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer
*Grate mounting:
*Hopper shaker mounting:
*Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

=Soil Pulverizer=

1.5x½ stubs – 3 with washers for hinges
[2]1"x3”, 2 metal lock nuts 2 nuts
[8] 1.5"x1/2”  short bolt adjusters, [8] nuts
[2] 5” x 3/4", washer + metal locknut
[8] 2"x5/8” bolts + [8] metal locknuts

[[Category:LifeTrac III]]