View source for Burning Bootloader on Arduino Mega

From [https://electronics.stackexchange.com/questions/7769/how-to-burn-arduino-mega-2560-bootloader]:

*"You should be able to burn it using the Arduino software with the AVR ISP. See the Tools menu.
*If that doesn't work, try the Arduino forum."
*This appears to be an issue of a driver for one of the fake Arduino chips - CH340 - see notes at the source of the boards from Zyltech - http://www.zyltech.com/ramps-14.html
*Driver says it's good for kernels up to 3.13, I have 4.8 on my other computer and driver install doesn't work