View source for File:APTEK-CHAIR-075PLY-025endmill.tap

← File:APTEK-CHAIR-075PLY-025endmill.tap

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, Administrators.

You can view and copy the source of this page.

This is a g-code (cutting file) which will produce the parts for one chair from a 48x48in sheet of 3/4in plywood. Use a 0.250in spiral end mill router bit, set spindle speed at maximum.

Return to File:APTEK-CHAIR-075PLY-025endmill.tap.

Retrieved from "https://wiki.opensourceecology.org/wiki/File:APTEK-CHAIR-075PLY-025endmill.tap"