View source for SEH 2 Kitchen and Bathroom Part Library

{{Hint|This is for Seed Eco-Home 2. See full development at [[Seed Home v2]]}}

=Working Doc=

<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRKyeQKdaNmGI-TG-j9D8ixSTOJtEszRP9WVOL6S4eiKL6UmkfazC3u_GqmdzINVrx_cU_lDyNcMwWI/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>

[https://docs.google.com/presentation/d/1fAUttuSxS-AJl8mnhjV0xwxMBkYRnjLqyuL0W04DwZM/edit#slide=id.gb328b2d63d_0_9 edit]

=Utility Wall Part Library=
==Plumbing==

Note that for extracting a 1-part file of plumbing - for positioning correctly in final document - we have  a working file [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/blob/main/plumbing_extract_process_final.fcstd] where all parts are turned to clones. Otherwise part tree is too complex to navigate if it has editable parts. 

<gallery perrow=6>

File:utewallassy.png|'''Utility Wall assembly.''' Plumbing and water.  Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. FreeCAD -[[File:utewallassy.fcstd]]. 

File:125adapter.png |'''1-1/4" Adapter'''. For under sink. - FreeCAD - [[File:125adapter.fcstd]].

File:plumminonly.png|'''Plumbing only.''' Not finished. See source at Gitlab. - FreeCAD -[[File:plumminonly.fcstd]] 

File:3singlewye.png |'''3" single wye'''. McMaster - [https://www.mcmaster.com/2389K49/]. FreeCAD -[[File:3singlewye.fcstd]]

File:2"-tee.png |'''2" PVC Tee''' -157k - STEP -[https://www.mcmaster.com/#2389k23/=1bcgk5c] - FreeCAD - [[File:2"-pvc-tee.fcstd]].

File:Long_offset_tee.png |'''3" to 3" wye'''. Aka ''long offset tee''. In our case, this goes from 3" to 4". McMaster - [https://www.mcmaster.com/2389K49/]. FreeCAD -[[File:3to3wye.fcstd]]
File:45degtest.png|'''45 Degree Test.''' For sink connection.  - [[File:45degtest.fcstd]] 
File:doublesinkdrain.png|'''Double Sink Drain.''' Double sink drain.  - [[File:doublesinkdrain.fcstd]] 
File:horizbathdrain.png|'''Horizontal bath drain.''' - FreeCAD -[[File:horizbathdrain.fcstd]] 
File:simple2trap.png|'''Simple 2" trap.''' - FreeCAD -[[File:simple2trap.fcstd]] 
File:toiletdrain.png|'''Second floor Toilet Drain.''' - FreeCAD -[[File:toiletdrain.fcstd]] 
File:Adfads.png|'''First floor Toilet Drain.''' - FreeCAD -[[File:firstfloortoiletdrain.fcstd]] 
File:doublecleanout.png |'''4" double cleanout'''. McMaster - [https://www.mcmaster.com/2389K41/]. FreeCAD -[[File:doublecleanout.fcstd]]
File:toiletflange.png |'''Toiled flange with closet elbow'''. McMaster - [https://www.mcmaster.com/2389K41/]. FreeCAD -[[File:toiletflange.fcstd]]
File:345.png |'''3" 45 Degree PVC Elbow'''. McMaster - [https://www.mcmaster.com/2389K41/]. FreeCAD -[[File:345elbow.fcstd]]
File:3to2reducer.png |'''3" to 2" reducer bushing.'''. From McMaster [https://www.mcmaster.com/2389K75/].  - FreeCAD -[[File:3to2reducer.fcstd]].
File:2combowye.png |'''2" Combination Wye'''. From McMaster [https://www.mcmaster.com/2389K48/].  - FreeCAD -[[File:2combowye.fcstd]].
File:3in225street.png |'''3" street elbow, 22.5 degree'''. From McMaster [https://www.mcmaster.com/2389K414/].  - FreeCAD -[[File:3in225street.fcstd]].
File:3santee.png |'''3" Sanitary Tee'''. From McMaster [https://www.mcmaster.com/2389K24/].  - FreeCAD -[[File:3santee.fcstd]]
File:3elbow.png |'''3" PVC Elbow'''. Standard height of 4.75" as in [https://www.mcmaster.com/2389K29/]. - size:20kb - FreeCAD -[[File:3"-pvc-elbow.fcstd]]
File:3to15bushing.png |'''3" to 1.5" reducer bushing''' - FreeCAD -[[File:3to15bushing.fcstd]]
File:3wye.png |'''3" double wye''' - size:80kb - FreeCAD -[[File:3wye.fcstd]]
File:345streetbend.png |'''3" 45 degree street elbow''' - size:80kb - FreeCAD -[[File:345streetbend.fcstd]]
File:1FKHDAF.png |'''1.5" 45 degree street elbow''' - size:80kb - FreeCAD -[[File:1545streetbend.fcstd]]
File:15elbow.png |'''1.5" elbow''' - size:30kb - FreeCAD -[[File:15elbow.fcstd]]
File:bathdrainkit.png|'''Bath drain kit.''' - FreeCAD -[[File:bathdrainkit.fcstd]] 
File:Riough.png|'''Rough plumbing.''' - FreeCAD -[[File:roughplummin.fcstd]] 

</gallery>
==Cabinets==
<gallery perrow=6>

File:Cabdsafsdf.png|'''Cabinets.''' - FreeCAD source - Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Iterations - [[File:cabinets.fcstd]]. 

</gallery>

==Water==
<gallery perrow=6>


File:2cross.png |'''2" PVC cross. ''' - FreeCAD - [[File:2cross.fcstd]].

File:2"-elbow.jpg |'''2" PVC Elbow. ''' Full detail and simple copy. - size:157kb - FreeCAD -[[File:2"-elbow.fcstd]].
File:bathsink.png|'''Bathroom sink.''' - FreeCAD -[[File:bathsink.fcstd]].
File:pex_cross.png|'''3/4" to 1/2" push fit cross.''' - FreeCAD -[[File:34to12pushfitcross.fcstd]].
File:facepipesuspender.png|'''1/2" face pipe suspender.''' - FreeCAD -[[File:facepipesuspender.fcstd]].
File:215bush.png|'''2" to 1.5" bushing.''' - FreeCAD -[[File:215bush.fcstd]].
File:tailpiece.png|'''Tailpiece extension.''' - FreeCAD -[[File:tailpiece.fcstd]].
File:adjtrap.png|'''Adjustable trap.''' With bellows - FreeCAD -[[File:adjtrap.fcstd]].
File:sink.png|'''Generic sink dimensions.''' Wall ply ends 2' above floor. 3 holes in cabinet, trimmed witch escutcheons- FreeCAD -[[File:sinkdim.fcstd]].
File:245el.png|'''2" 45 degree elbow.'''- FreeCAD -[[File:245el.fcstd]].
File:12dropear.png|'''1/2" drop ear elbow.'''- FreeCAD -[[File:12dropear.fcstd]].
File:12snapclip.png|'''1/2" snap clip for PEX.'''- FreeCAD -[[File:12snapclip.fcstd]].
File:34snapclip.png|'''3/4" snap clip for PEX.'''- FreeCAD -[[File:34snapclip.fcstd]].
File:1snapclip.png|'''1" snap clip for PEX.'''- FreeCAD -[[File:1snapclip.fcstd]]. 
File:34bendsupport.png|'''3/4" NPT pipe bend support.'''- FreeCAD -[[File:34bendsupport.fcstd]]. 
File:12npttoshark.png|'''1/2" NPT to Sharkbite adapter.'''- FreeCAD -[[File:12npttoshark.fcstd]]. 
File:34npttoshark.png|'''3/4" NPT to Sharkbite adapter.'''- FreeCAD -[[File:34npttoshark.fcstd]]. 
File:1234tee.png|'''1/2"-1/2"-3/4" Tee.''' Placeholder for push-fit of same size. - FreeCAD -[[File:1234tee.fcstd]]. 
File:12sharkel.png|'''3/4" sharkbite elbow.'''. McMaster - [https://www.mcmaster.com/5483K52/] - FreeCAD -[[File:34sharkel.fcstd]]. 
File:12sharktee.png|'''3/4" push to connect tee.'''. McMaster - [https://www.mcmaster.com/9400T63/] - FreeCAD -[[File:34sharktee.fcstd]] 
File:22degel.png |'''1/2" 22 degree PVC elbow''' - FreeCAD -[[File:22degel.fcstd]],
File:34dihfaidfhaidsfihasdf.png |'''3/4" NPT to Socket PVC Adapter''' - FreeCAD -[[File:34npttosocket.fcstd]],
File:34elbow.png |'''3/4" PVC Elbow''' - FreeCAD -[[File:34"-pvc-elbow.fcstd]],
File:prelief.png |'''3/4" Pressure Relief Valve for water.''' McMaster full CAD - [https://www.mcmaster.com/4780K12-4780K84/] - FreeCAD simplification -[[File:1"-pvc-elbow.fcstd]],
File:elbow.png |'''1" PVC Elbow''' - FreeCAD -[[File:1"-pvc-elbow.fcstd]],
File:drainpanadapter.png|'''1" water heater drain pan adapter.''' FreeCAD -[[File:drainpanadapter.fcstd]]
File:shark.png|'''1" NPT to 3/4" sharkbite fitting.''' FreeCAD -[[File:1to34sharkbite.fcstd]] 
File:1cross.png|'''1" cross.''' FreeCAD -[[File:1cross.fcstd]] 
File:134bush.png|'''1" to 3/4" bushing.''' FreeCAD -[[File:134bush.fcstd]] 
File:34pessurereducer.png|'''3/4" pressure reducer.''' Simplification in FreeCAD -[[File:34pessurereducer.fcstd]] 
File:34valve.png|'''3/4" NPT male to female valve.''' Full size source [https://www.mcmaster.com/33325K34/]. Simplification in FreeCAD -[[File:34mfvalve.fcstd]] 

File:coldlines.png|'''Cold Water Lines.''' - FreeCAD -[[File:coldlines.fcstd]] 
File:waterheater.png|'''Water heater.''' - FreeCAD -[[File:waterheater.fcstd]] 
File:watersupply.png|'''Water supply manifold.''' - FreeCAD -[[File:watersupply.fcstd]] 
File:Asdfasdf.png|'''1/2" push to connect valve.''' McMaster - [https://www.mcmaster.com/2615K2/] - FreeCAD -[[File:12pushconnectvalve.fcstd]] 
File:12sharktee.png|'''1/2" push to connect tee.'''. McMaster - [https://www.mcmaster.com/51055K146/] - FreeCAD -[[File:12sharktee.fcstd]] 
File:21wye.png|'''2" to 1" wye.'''. McMaster - [https://www.mcmaster.com/4880K054/] - FreeCAD -[[File:21wye.fcstd]] 

</gallery>



==Framing==

<gallery perrow=6>

File:seh2_bathroomwalls.png|'''SEH 2 Bathroom Walls.''' FreeCAD Detail- [[File:seh2_bathroomwalls.fcstd]]


File:Dafdsfasf.png|'''Second story tub wall.''' - FreeCAD -[[File:secondstorytubwall.fcstd]] 

File:utewallframeleft.png|'''Utility Wall with cutout.''' - FreeCAD -[[File:utewallframeleft.fcstd]] 

File:Uteright.png|'''Utility Wall without cutout.''' - FreeCAD -[[File:utewallframeright.fcstd]] 

File:Utepart.png|'''Partial frame.''' - FreeCAD -[[File:utewallpartial.fcstd]] 

File:10footwall.png|'''10 foot wall, 2x4 lumber.''' - FreeCAD -[[File:10footwall.fcstd]] 

File:8footframe.png|'''8 foot wall frame, 2x4 lumber.''' - FreeCAD -[[File:8footwall.fcstd]] 

File:8foot39frame.png|'''8 foot wall frame, 2x4 lumber, 39" long.''' - FreeCAD -[[File:8foot39frame.fcstd]] 

File:dryer.png|'''3.5 cubic foot dryer.''' - FreeCAD -[[File:dryer.fcstd]] 

File:wash.png|'''3.5 cubic foot washer.''' - FreeCAD -[[File:washer.fcstd]] 

File:showertub.png|'''Shower Tub.''' - FreeCAD -[[File:showertub.fcstd]] 

File:aav.png|'''Air Admittance Valve.''' - FreeCAD -[[File:airadmittance.fcstd]] 

File:laundrystandpipe.png|'''Laundry standpipe.''' - FreeCAD -[[File:laundrystandpipe.fcstd]] 

File:washeroutlet.png|'''Washer outlet box.''' - FreeCAD -[[File:washeroutlet.fcstd]] 

</gallery>

=Includes=
*Pex for delivery
*Water heating
*Drain, Waste, Vent including dryer and shower
*Water supply for kitchen and bath

=Related=
*Utilities concept - [[Seed Home 2 Utility Panel Conceptual Design]]
*[[Fab Tool Icons]] - mostly tools, and high pressure hydraulics
*[[Biodigester Part Library]] - includes hydronics for heating and other fittings for gas collection. Includes sink blackwater.
*[[Hydronics Part Library]] - focusing on hydronic heating components.
*[[PVC Pipe and Fittings Library]] - all types of fittings, including FreeCAD generator.
*See also [[Seed_Home_v2_3D_CAD#Plumbing_Rough-In]] and [[Seed_Home_v2_3D_CAD#Plumbing_Final]]