Cold Saw/V1 Design Files/Pin Collar: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

25 May 2012

  • curprev 18:0518:05, 25 May 2012‎ YK talk contribs‎ 446 bytes +446‎ Created page with "*'''Outside Diameter: 25.4mm''' *'''Inside Diameter: 8mm''' *Length: 15mm''' *'''Setscrew Hole Diameter: 6.8mm thru 1 side, then M8x1.25 tap. *'''Setscrew Hole Spacing Alon..."
Retrieved from "https://wiki.opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar"