Moriah Log: Difference between revisions
Jump to navigation
Jump to search
Moriah Baltz (talk | contribs) No edit summary |
Moriah Baltz (talk | contribs) |
||
| Line 3: | Line 3: | ||
*Worked on the instruction manual to the [https://docs.google.com/presentation/d/1SUUtXan2g-ZltK5WlgeAXnqHiHaWgqLzG8JlQRqrjkc/edit#slide=id.p: Solenoid Module Assembly]. | *Worked on the instruction manual to the [https://docs.google.com/presentation/d/1SUUtXan2g-ZltK5WlgeAXnqHiHaWgqLzG8JlQRqrjkc/edit#slide=id.p: Solenoid Module Assembly]. | ||
*Converted .stl files to .gcode files to print on the LULZBOT 3-D printer | *Installed a plug-in on sketchup to export files as .stl files. | ||
*Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer. | |||
(testing at Infill> Fill Density> .05) | |||
*3-D printed the Minimug. | |||
*Viewed .stl files to check measurements in meshlab. | |||
=Mon Jun 9, 2014= | =Mon Jun 9, 2014= | ||
Revision as of 14:34, 11 June 2014
Tues Jun 10, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Installed a plug-in on sketchup to export files as .stl files.
- Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer.
(testing at Infill> Fill Density> .05)
- 3-D printed the Minimug.
- Viewed .stl files to check measurements in meshlab.
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Module Assembly.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Assembly Module.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.